How To Keep Score Baseball

What’s the Score?: The Basics of Scorekeeping

My time decreased from 45 minutes to around 20 minutes from start to finish after making about 20 bracelets for my team, the other coaches, and a handful of parents who were pleased with them once I completed them. In the end, I decided to make all of the splices and cores first and then assemble them, which appeared to help move the process of manufacturing several of them along a little bit faster. Please have fun creating them for your teams, friends, or even for yourself. When it comes to baseball (white chord instead of yellow!) or softball, I can almost promise that everyone who knows someone who plays will appreciate receiving one.

The Basics

The method that gives a number to each player is the basis of the scorekeeping process. Don’t mistake them with jersey numbers; these standard numerical symbols used in scorekeeping remain constant throughout the game: 1 = pitcher; 2 = pitcher catcher 2 = catcher 3 is the number of the first baseman. 4 = second base in baseball 5th base is represented by the number 5. 6 denotes a shortstop. 7 denotes the left field position. 8 is the middle of the field. 9 represents the right field. Using a 10-player lineup, the number “10” might suggest a short fielder or fourth outfielder, for example.

Among these are: 1B is an abbreviation for single.

  • 3B is an abbreviation for triple.
  • DP is an abbreviation for double play.
  • E stands for error.
  • WP is an abbreviation for wild pitch.
  • RBI stands for run batted inSB stands for stolen base IP is an abbreviation for Illegal Pitch (Major Division and below) The abbreviation BK stands for balk (for intermediate 50/70 and higher).

Trying It Out

Write out the batting order for each team to get things started. They will be traded between the two managers and will not be able to alter throughout the game, with the exception of substitutes. It is critical to record player jersey numbers alongside the batting order in order to ensure that the appropriate players bat in the appropriate order. The basic scorebook will resemble a gigantic checkerboard, with nine (or ten, or more) rows going across the page and a matching number of columns going down the page, as seen in the illustration.

  • For example, the first inning, second inning, and so on are all separated by a column.
  • Consider the Mudville Mudhens, who are batting in the first inning of the opening game of the season.
  • For the sake of argument, let’s say the leadoff batter grounds out to the shortstop.
  • This would be stated in Section 6-3.
  • Similarly, a grounder to third base would result in a 5-3 score.
  • The letters L8 or F8 may be used to represent a lineout to center field, with a straight line above the F and the 8 to suggest a line drive.
  • Again, various scorers use different symbols, but if the ball is thrown to the center fielder, the “8” is always used to indicate a successful throw.

Some scorebooks will have little squares within each at-bat square to indicate this, while others will not have any.

Keeping accurate pitch counts is made possible by this method.

The second hitter is now on the mound.

He smacks a single to the right field gap.

A line should be drawn from home plate to first base in his at-bat square, with “1B” or “1B9” written next to the line in a paper scorebook to indicate where he is at first base.

The Mudhens now have a runner on first base, one out, and their third batter is on the mound for them.

He smacks a double to the right field corner.

During this time, the runner on first came all the way around and scored on the play as well.

In his at-bat square, indicate that he has completed the whole circuit of the diamond, including stops at second, third, and home.

That diamond should be colored in to signify that he scored a run.

What is the significance of the number 6?

Meanwhile, on the No.

Because there won’t be much room for all of this in a paper scorebook, it’s critical to write small — but legibly — in order to avoid confusion.

The runner on second tries to steal third but is thrown out because of his inexperience.

Almost certainly 2-5, since the catcher “2” tossed to the third baseman, “5,” who tagged him out at third base.

The Mudhens have two outs left, and Casey is on the mound. Casey, on the other hand, is unstoppable. In this situation, Casey receives a “K” – the global scoring sign for a strikeout. Alternatively, a reverse K indicates that the hitter glanced at strike three but did not swing.

Heading to the Bottom

The peak of the first has come to an end. Your very first scoring experience has now been recorded. Not nearly, to be honest. At the conclusion of the half inning, draw a line or a ‘x’ at the location of the next hitter. This plainly identifies who will bat first in the following inning as the leadoff batter. Then it’s ideal to tally up the runs, hits, errors, and, if you’re keeping track, pitches thrown, and make notations at the bottom of the page to keep track of everything. A section for this should be included in either an electronic or a paper scorebook.

Make your way to the opposite side of the book, where you should have the starting lineup for the home team in place, and you’ll be ready to begin.


After all of this, that T-shirt you could see at the stadium suddenly makes sense: “I scored a run, I won the game.” 6-4-3=2.

How to Provide a Box Score

The balance (or proof) of a box score is achieved when the sum of the team’s times at bat, bases on balls received, hit batters, sacrifice bunts, sacrifice flies, and batters awarded first base because of interference or obstruction equals the sum of the team’s runs, players left on base, runners removed under playing rule 7.13(c) (Little League Baseball Majors and below), and the putouts of the opposing team.

Give It a Try

The most effective approach to learn is to get started right away. Watch many competent scorekeepers and keep a parallel book to see which approach is the most effective for you to learn from. It is extremely beneficial to observe Little League and high school games in person, as well as professional baseball games on television, while paying close attention to the scoring decisions. Keep a scorebook that is well-organized and easy to interpret as your knowledge of the specific rules grows. Even while it is not a task to be taken lightly, it can be entertaining and can offer a new level to your pleasure of baseball and softball.

GameChanger, the live scoring app that provides coaching insights and fan updates, as well as the official scorekeeping tool endorsed by Little League®, has contributed this content.

Excerpts from the book “What’s the Score?” provide additional substance.

Additional information on scorekeeping practices can be obtained by contacting [email protected]

How To Score a Baseball Game With Pencil and Paper

The practice of keeping score in a baseball game with a piece of paper and a pencil dates back to the early days of the game. Keeping score is a terrific method for a fan to become more involved in the game. You’ll become completely absorbed in the game. Furthermore, each scorecard tells a tale about the game that you are attending. Scorecards are a terrific way to keep track of all the baseball games you’ve been to throughout the years. Because of the proliferation of high-tech scoreboards and mobile phones that can provide real-time updates in the palm of your hand, keeping score using a game card is becoming more obsolete.

  1. Prepare the playing card Take a look at your card.
  2. If you don’t want to spend $4 for a program, you may print one from the comfort of your own home using this helpful website.
  3. You should also give the players’ position number (see below) and jersey number, in addition to their names.
  4. When it comes to scoring baseball games, a shorthand has evolved to make things easier for everyone.

You are free to build your own style, however the following is the normal procedure: Numbers indicating where you are on the map. Each position has a unique number allocated to it. When you record fielding plays, these numbers will be used to identify the players.

  • Pitcher- 1, Catcher- 2, First Base- 3, Second Base- 4, Third Base- 5, Shortstop- 6, Left Field- 7, Center Field- 8, Right Field- 9, Designated hitter- DH
  • Pitcher- 1, Catcher- 2, Designated hitter- DH

Batter slang for “shorthand.” When a hitter comes to bat, use the following simple acronyms to keep track of whether he was hit, walked, or struck out:

  • Shorthand for batter. When a hitter comes to bat, use these simple acronyms to keep track of whether he was hit, walked, or struck out:

Follow the game

You’ve got your card ready in one hand and a hot dog coated in mustard in the other, and you’re ready to put the game out of reach. Each player has a row of squares with baseball diamonds next to their name, which represents their position on the field. These squares will be used to keep track of the progress of each batter. A single is recorded outside the diamond by writing 1B outside the diamond and shading the line from home plate to first. If the runner in first place moves to second place, the line from first to second place should be darkened.

  1. Here’s an illustration: If the runner receives a point, use your pencil to fill in the diamond.
  2. If that batter was the first out, circle the number “1” and write “1” on the board.
  3. If the batter is out after hitting the ball, you should write a note of what transpired throughout the play.
  4. For example, if Derek Jeter hits a grounder to the pitcher who then fields and tosses the ball to first base, the out would be recorded by writing “1-3” across the diamond.
  5. It’s not difficult at all.
  6. Consider the following scenario: Jeter is on first base after hitting a single.
  7. The shortstop tosses it to second, allowing Jeter to get out on the force play.

Here’s how we go about recording it.

This may be accomplished by darkening the line from first to second only halfway through.

Jeter’s starting lineup will look somewhat like this: To indicate the fielding sequence for Giambi, we will write “6-4-3” across the diamond on Giambi’s row.

Please don’t forget to include a “2” with a circle around it to indicate that he was the second player to be eliminated.

So, if the centerfielder catches a fly ball, you would write “F8” within the diamond of the batter who hit the ball to indicate that the centerfielder made the catch.

Consider the following scenario: Jeter was on first after hitting a single.

The third baseman fields the ball and tosses it to second base, resulting in a force out. As an example, here is what Jeter’s row might look like: If you have a card that looks like this at the conclusion of the game, you should avoid it. Pay close attention, then.

Make it your own

After you’ve mastered the fundamentals, you may start incorporating your own personal flair into your scorekeeping. There is no “wrong” or “right” method to go about this. The difficulty is to come up with a method that will allow you to easily keep track of the progress of a video game. An excellent example of someone who has customized their scorecard may be seen here.

Keeping a Clean Scorecard: A Baseball Beancounter’s Bible

I’m a statistician by training. As a statistician, I’m a big fan of your work. I enjoy statistics that are comprised of acronyms and may cause Joe Morgan to become perplexed. I believe that most of the standard statics we utilize are faulty, incomplete, and too frequently fall prey to small sample sizes and other problems, as well as other factors. However, regardless of whether you believe that the Win is the most important statistic or if you like to examine contextual wOBAs and compare them to a player’s VORP for the season, all of these figures must originate someplace.

  • Obviously, this is a baseball reference.
  • That’s correct, and it’s reasonable.
  • There are a variety of options for obtaining a scorecard these days.
  • Alternatively, you can do what I do and create your own cards.
  • Because they have a reasonable amount of pitchers’ places available, they have enough of room for substitutes, and the scorecard isn’t unduly packed on the actual score box, this is the case.
  • Okay, let’s start from the very beginning with the most fundamental concepts, beginning with Positions.
  • But I’ll proceed on the assumption that you don’t and tell you anyway.

7 – Left Field is the position.

This shorthand is used to conserve space in the score box so that plays may be scored as they occur.

The terms “offense” and “defense” each have their own particular notation.

The number “6-3” would be used to indicate a groundout from the shortstop to the first baseman.

Let us start with the basics.

An out-of-bounds play is often scored simply by writing a huge number above the score box to denote which fielder made the catch.

See also:  What Is Baseball Called

Some people like to use the letter “F8,” but I prefer the number “F8” on its own, and I’ll explain why in just a moment.

I prefer to clearly write them on my scorecard as “L8” or “pop6,” which indicates a lineout to CF or a popout to SS, respectively.

It doesn’t matter who catches it if the CF, RF, and 2B are all closing on the ball.

It is, however, still an out if the ball is hit clearly to right field and the 2B is nowhere to be found.

Popouts are rare in baseball.

I score these the same as if they were fair balls, but here is the point at which I insert the “F” that I described previously in the discussion.

We can’t forget about double plays in this discussion.

Taking the Tulo-Barmes-Helton DP as an example, the score is 6-4-3.

However, if the back end of the double play is not completed, you will not be penalized for an error.

” This play would be scored as a Fielder’s Choice, 6-4-3, with the runner out at second base, as shown below.

It’s basically defined as every instance in which a runner reaches because the fielder chose to get someone else out instead is referred to as a fielder’s choice.

A grounder to 1B that is fielded by the 1B on their own and either tags the runner or touches the bag is simply scored as “3u,” which is an abbreviation for “3-unassisted,” and is the lowest possible score.

Typically, you’ll only see this with the 1B and 3B, but it can happen with other classes as well.

In order to register a strikeout, you must simply indicate which strikeout it is in the bottom-right corner of the scorecard by circling it.

Look over to the other side of the plate for a moment.

You just track the batter’s journey down the basepaths and note how he arrived at his destination.

A double to RF would be denoted by the letters “2B9.” A triple to the letter CF is “3B8.” Have you gotten the picture?

But, you might wonder, what happens if they divide the difference.

When the CF and the RF are ripping after the ball, the CF will grab it first, and Chipper Jones will be limited to 2 bags since the CF possesses a cannon of an arm, as shown in the video above.

It is possible to make an exception when the ball is obviously in RF, but Adam Dunn slid for it and missed it miserably, and Shane Victorino had the play covered and prevented an inside-the-parker from being scored.

Then it’s on to pitching.

K, BB, HBP, and HR are all possible outcomes.

To create the appearance of a strikeout, place a huge Backwards K above the box.

When you have a dinger, you have to write down where the ball departed the park.

You get a “HR7” for your efforts.

Moving on to the scorecard now that we’ve covered the notation part of our discussion.

The first step is to fill up the scorecard with pertinent information, such as the date, time, scorer, weather conditions, and umpires, among other things.

The player’s uniform number should be included in the left box, followed by their name, and finally their position number should be included.

As soon as we have completed all of the paperwork, we will begin playing the game.

However, while the fundamentals of how to mark outs and hits, along with the appropriate placements, are quite general, this does not imply that you must copy my method exactly.

Do whatever makes the most sense to you in terms of keeping a record of the game!

During this process, I’ll give you a play-by-play of what’s going on and then paste how I score it as we go along.

Fowler hits a single to center field on a 2-1 count.

In order to score this, we darken the line to indicate how far Fowler made it on his hit, and then write the necessary notation to indicate what he did in order to reach that point.

You are not have to be sequential; instead, you can just mark “x” for each strike or ball.

Now, some people would circle the pitch or anything like that, but I don’t generally go into such depth with my notes.

In addition, you may opt to score it as “SB7” to signify that he took the bag while the LF was still on the field.

Todd Helton, who is batting third, grounds out to second base on a 2-0 count.

We track Fowler’s movement along the basepaths by filling in the gaps in the line and noting who has moved him forward.

We indicate Atkins’ move to first base by filling in the line and marking “5” to credit Atkins with the RBI, and we advance Fowler to home plate by filling in the line and marking “5” to credit Atkins with the RBI.

Hawpe, who is batting 5th, spans the gap with the first pitch, moving Atkins to third base (slow).

Hawpe did something, so we move Atkins up to 3B by marking the “9” to indicate that something happened, and then we add the arrow to indicate that Hawpe got him all the way along.

Hawpe and Atkins, without a doubt, do not progress.

Atkins is victorious.

Iannetta, who is batting eighth, is hit by seven pitches, one of which is a foul ball.

Ubaldo is batting ninth.

There’s nothing to it.

Following your understanding of the fundamentals, you may move on to asking questions regarding scorekeeping that are more specific to your situation.

Keep in mind that baseball is a sport that requires discipline, not just in terms of pitching, fielding, and batting, but also in the way records are kept and statistics are compiled.

I’d like to express my gratitude to Patrick McGovern of for making such beautiful templates available. It has been years since I’ve used his scorecards, and they are truly remarkable in their simplicity.

Using the Proper Symbols to Score a Baseball Game

Statisticians will recognize me. As a statistician, I’m a big fan of the data. It is my preference to use statistics that are comprised of acronyms and may cause Joe Morgan to become confused. My opinion is that the vast majority of traditional statics we employ are flawed and incomplete, and that they are too frequently subjected to small sample sizes and other shortcomings. This data must come from somewhere, regardless of whether you believe that the Win is the ultimate statistic or whether you prefer to compare contextual wOBAs and compare them to the season’s VORP of a player.

  • Baseball, of course, is a no-brainer!
  • But seriously, a statistical evaluation of baseball can only be useful if the data is both available and properly collected.
  • Today, RowBots, we’ll be learning how to properly maintain a scorecard.
  • You can buy a book full of them at Dick’s or Sports Authority, or you can buy an individual card at a Rockies game for $1.50, or you can do what I do and make your own cards from scratch at home.
  • Because they have a reasonable number of pitchers’ spots available, they have plenty of room for substitutions, and the scorecard is not overly cluttered on the actual score box, they are a good choice.
  • To get things started, let’s start with the most fundamental of all: positional terminology!
  • But I’ll proceed on the assumption that you don’t and tell you anyhow anyway.

first baseman 3rd baseman the number four, or second base third base (position number five) The number six is a shortstop, which means left field (seventh position) The number 8 represents the center field, and the number 9 represents the right field.

The shorthand has everything to do with the way each and every play is executed on the field.

A dash is used to separate each player who was involved in the ball’s final outcome from the rest of the players who were not involved.

It would be marked “1-4-3” if a groundout is first deflected by the pitcher, then to the second baseman, and finally to first.

To begin with, When it comes to plays that are handled by a single player, it is customary to include another mark or notation to indicate the nature of the putout.

Consider the following scenario: a flyout to center field would result in a big “8” in the score box.

There is a distinct difference between a Lineout and a Popout, as we all know, compared to a standard ground ball.

Depending on where the ball was fielded, I also differentiate between flyouts and popouts.

However, if it is a clear ball to the RF and the 2B is nowhere to be found, it is still a flyout, regardless of how much of a “can of corn” it is.

Fielding out a foul ball fly or popout is another type of fielding out that should be discussed.

As an example, a popout to the C in foul territory would be scored as “popF2.” Double plays must also be considered in this discussion.

The Tulo-Barmes-Helton DP, for example, is scored as 6-4-3.

You can’t assume the double play, as the scorekeepers put it.

A lot of Fielder’s decisions are difficult to understand.

In terms of fielding, the unassisted play, also known as the “Helton Special,” is the final method of recording a strike out.

This is most commonly seen with the 1B and 3B, but it can occur with other classes as well.

In this case, you score it as a 5-3 double play.

Consequently, if Atkins leads off an inning with a sharp grounder to short, you’d score it “6-3” and mark a 1 in the corner of the field and circle the number 1.

The recording of hits has become increasingly simple.

If a single were to be hit to left field, the score would simply be “1B7,” indicating that one base had been reached at the number seven spot (LF).

It is “3B8” for a triple to CF.

Quite straightforward.

In that case, you score it based on who gets to it first and throws it back in, with one minor exception, which I’ll explain in a second.

The exception occurs when the ball is clearly in the right field corner, but Adam Dunn slid for it and missed it horribly, and Shane Victorino had the play covered and prevented an inside-the-parker from being scored upon.

To the pitching mound we go!

The following are the initials K: BB, HBP, HR.

A large Backwards K is placed over the box to give the appearance of a strikeout.

It is necessary to write down where the ball left the park in order to receive a dinger.

A “HR7” is assigned to you.

Moving on to the scorecard now that we’ve covered the notation part.

The first step is to fill up the scorecard with pertinent information, such as the date, time, scorer, weather conditions, and umpires, among other things.

It is customary to start with the player’s uniform number on the left and work your way down the list to their name and position number.

We then continue to the actual game itself once all of this paperwork is completed.

However, while the fundamentals of how to mark outs and hits, along with their respective placements, are quite general, this does not imply that you must copy my method exactly.

If you feel that writing anything different would make your work clearer or more understandable, then go ahead and do it!

If you keep score on a regular basis, you’ll be able to figure out what works best for you very soon.

As a result, Dexter Fowler will take the field to face Randy Johnson in the opener.

We haven’t heard from anyone.

At a nutshell, we mark balls and strikes in the bottom left-hand corner of the box, balls on the left and strikes on the right, as follows: You are not have to be sequential; you may just mark a “x” for each strike or ball if you choose.

As for the pitch, while some people will circle it or anything like that, I don’t generally go into such detail.

Spilborghs strikes out swinging on the 1-2 pitch to continue the AB (no fouls).

Todd Helton is in the third spot in the lineup.

The progression of Fowler along the basepaths is charted by filling in the lines and noting who has moved him forward.

Atkins singles to left field on a 1-1 count in the fourth inning, driving home Fowler.

We also put a tick in Dex’s score box to show that a run has been scored as well.

As soon as Rowand gets his hands on the ball, Atkins is out of the game.

Tulowitzki, who is batting sixth, walks on five pitches, putting runners on base.

Ian Stewart, who is batting 7th, hits a one-out single to right field on the first ball he gets.

Tulowitzki is moved to third base after Hawpe scores.

The ninth inning is brought to a close by Ubaldo’s line out to shortstop.

There isn’t anything to it at all!

Following your understanding of the fundamentals, you may go ahead and inquire about the specifics of scorekeeping.

Never forget that baseball is a sport that requires discipline, not just in terms of pitching, fielding, and batting, but also in the way records are kept and statistics are tallied.

Thanks to’s Patrick McGovern for making such beautiful designs available to us. It has been years since I’ve used his scorecards, and they are truly remarkable in their quality.

Abbreviations And Symbols

First, determine the starting lineups for each club. When attending a professional game, the starting lineups will be displayed on the stadium’s scoreboard and announced around 10–15 minutes before kickoff. Lineups can be provided by a game official or coach at the collegiate level or lower level. Input each player’s uniform number, name, and position on the scorecard to complete the scorecard. If you want to use letter abbreviations (like you might see on a scoreboard), you may do so. If you want to use numbers, you can do so as well.

  • Pitcher (P or 1), catcher (C or 2), first baseman (1B or 3), second baseman (2B or 4), third baseman (3B or 5), shortstop (SS or 6), left field (LF or 7), center field (CF or 8), right field (RF or 9) and designated hitter (DH) are the positions on the baseball diamond.
See also:  What Is A Foul In Baseball

Because 1B is a single, 2B is a double, and so on, using numbers (with the exception of the DH) helps to minimize misunderstanding with the acronyms for what happens in the game. Here are some more commonly used acronyms to describe what happens in the game besides those listed above:

  • Baseball terminology: single (1B), double (2B), triple (3B), home run (HR), runs batted in (RBI). Double play (DP)
  • Fielder’s choice (FC)
  • Error (E)
  • Stolen base (SB)
  • Caught stealing (CS)
  • Unassisted (U)
  • Strikeout swinging (K)
  • Strikeout looking (backward K)
  • Double play (DP)
  • Sacrifice (SAC), wild pitch (WP), and passed ball (PB) are all terms used in baseball.

Softball games, as opposed to baseball games, are more likely to include four outfielders, as opposed to three in baseball games. According to this scenario, the left-center fielder has an 8, the right-center fielder has a 9, and the right fielder has a 10. And, depending on the league regulations, there may even be additional designated hitters in the lineup – players who bat but do not play in the field or substitute for the fielders — to help round out the order.

Sample Game: Top Of The First

In the top of the first inning, the Mariners scored one run. The game between the Seattle Mariners and the Cleveland Indians on June 11, 2007 is used as an example. Most scorecards and score sheets already have the diamond drawn in, and you only need to draw a line from the diamond to the base that the player is advancing to. Mark the balls (top line) and strikes (bottom line) in the upper left corner of each box (bottom line). To begin the sample game, say the following:

  • You draw a line from home to first base and write “1B” in the lower right corner of the diagram next to the line to denote a single by Ichiro Suzuki, who is the left fielder
  • Vidro, the second batter, then grounds out to first base, so you write “3U,” which indicates that the first baseman made the unassisted out. Suzuki moves up to second, causing you to create a line from first to second
  • Jose Guillen then hits a single, allowing Suzuki to cross the plate. As a result, place a “1B” in the lower right corner and “RBI” in the lower left corner. Draw a line from Suzuki’s line to the second and third positions, and then to the finish line. Most scorekeepers then fill in the box so that they can see how many runs have scored at a glance
  • For example, if Raul Ibanez flies out to right field, put a “9” in the box to indicate that the right fielder caught the fly ball
  • After that, Kenji Johjima singles and Guillen advances to second
  • And after that, Kenji Johjima singles and Guillen advances to third. Afterwards, Ben Broussard grounds out to the second baseman, who tosses the ball to first, making the score “4-3.”

Seattle has taken a 1-0 lead. Seattle has 1 run, 3 hits, 0 errors, and 2 men left on base, according to the lineup below. Take notice of the line below Broussard, which indicates that it was the final player out. That way, you can quickly tell where you need to begin the following inning.

Sample Game: Bottom Of The First

Seattle has taken a 1-0 lead over New York. Seattle has 1 run, 3 hits, 0 errors, and 2 men left on base, according to the lineup listed below the line-up. Take notice to the line below Broussard, which indicates that it was the last to be snatched away. It makes it simple to choose where you should begin the next inning.

  • Grady Sizemore is struck out on a 3-2 pitch to right field, therefore place a “9” in that area on the scoresheet. Jason Michaels then hits a fly out to left field, which should be marked with a “7.” Assuming there are two outs, Casey Blake singles on a 2-2 pitch, resulting in the designation “1B” in the bottom right corner and a line to first base
  • Travis Hafner then hits a double, allowing Blake to advance to third base. Because of this, Hafner is placed at second base and Blake at third
  • Jhonny Peralta then walks, therefore he is designated as a base on balls adjacent to the first baseman’s line to first base. Hafner and Blake remain in their positions
  • With the bases loaded, Ryan Garko flies out to left field on a 1-2 pitch. It should be marked with a “7.” As a result, the Indians leave three runners on base in the first inning.

Below the lineups, it is noted that there were no runs scored on two hits, with no errors, and three runners left on the field.

Sample Game: Top Of The Third

The Mariners scored four runs in the third inning to take a commanding lead. Let’s fast forward to the third inning of the Seattle game.

  • Three runs in the third inning gave the Mariners the lead they needed to take the game over. To fast forward to the third inning of the Seattle game.

The Mariners scored four runs in the third inning to take the lead. Let’s fast forward to the third inning of the Seattle Mariners game.

Sample Game: Bottom Of The Fifth

The Mariners broke through with four runs in the third inning. Let’s fast forward to the third inning of the Seattle Mariners’ game.

  • It all starts with a ground out by Josh Barfield to the third baseman (who is 5″ tall), who then delivers the ball to first (“3”). As a result, the score is 5-3. After that, Kelly Shoppach hits a single, so put “1B” in the lower left corner and a line from home to first
  • Grady Sizemore follows with a single of his own. To mark Shoppach’s progression to second, draw a line from first to second
  • Jason Michaels does the same thing. Sizemore is placed second, and Shoppach is placed third
  • The next round becomes a little more tricky. Blake is the hitter, and he drives in two runs with a ground ball to the shortstop, who throws home to force Shoppach from the game. He manages to go to first base. As a result, construct a line between third and home that prevents Shoppach’s progress, and move Sizemore to third and Michaels to first while putting Blake on first. Blake’s box has a “FC” (fielder’s choice, meaning he didn’t go for the out on the batter) and a “6-2,” which means shortstop to catcher
  • The next batter is Travis Hafner, who hits a single to right-center field. Sizemore and Michaels each score a goal, and Blake moves up to second place. As a result, Hafner receives a “1B” and moves up to first. In addition, he receives “2 RBI.” In order to color in their diamonds, Sizemore and Michaels must travel all the way home. Draw a line from first to second in Blake’s box
  • The next batter is Jhonny Peralta, who hits a single to bring Blake home with the winning run. Hafner takes over at second base. As a result, Peralta receives the letters “1B,” a “RBI” in the lower left corner, and a line from first base to home. Complete Blake’s diamond and color him in, then shift Hafner from first to second place on the list. Ryan Garko hits a fly out to right field to bring the inning to a close. That’s a “9,” by the way.

So the final tally is 3 runs, 5 hits, 0 errors, and 2 runners left on base for the Reds.

Sample Game: Bottom Of The Sixth

In the sixth inning, the Indians scored two runs. Now for the Indians’ sixth inning:

  • In his box, put “2B,” a line from home to first and first to second, and “RBI” because Nixon flies out to center (“8”)
  • Barfield hits a single
  • Shoppach hits a double
  • And Barfield scores as a result of Shoppach’s double. Barfield’s diamond has been colored
  • From Cha Seung Baek to Eric O’Flaherty, the Mariners have changed their starting pitchers. You may begin filling up Baek’s box on the Mariners sheet by clicking on it. A total of 27 hitters were faced by him throughout his 5 1/3 innings of work. He allowed 10 hits, 1 walk, 4 strikeouts, and walks. However, you are unable to complete his runs permitted line at this time. He was the one who placed Shoppach on second base
  • Sizemore then knocks a single to left field, advancing Shoppach to third. Sizemore is given the position of first baseman and a line from home to first base
  • Shoppach’s line is extended to third base
  • And Sean Green takes over for O’Flaherty. O’Flaherty is given 0 innings and 1 hit. He’s in charge of Sizemore, who’s at first base
  • Michaels is hit by a pitch while trying to steal second. Put a “K” in his position, and Blake follows it up with a single that brings Shoppach in. Fill in the blanks with “1B” and a “RBI.” Bring Shoppach back to his house and color in his diamond. Sizemore advances to third base, and the official scorer determines that Sizemore advanced as a result of a fielding mistake by the left fielder. Placing the letter “E7” next to the line between second and third in Sizemore’s location effectively puts an end to Baek’s career. All five runs are earned, and the Mariners have changed pitchers once more, this time to George Sherrill. As a result, in Green’s line, placed 1/3 of an inning, one hit, and one strikeout in the two hitters that faced the pitcher. Because he is accountable for Blake, you are unable to fill in the blanks for his runs at this time
  • Hafner gets thrown out at third base. So that’s a “5” on the scale. That brings the inning to a stop and puts an end to the careers of both O’Flaherty and Green, who both get a “0” next to their runs and earned runs totals. A side note: If Sizemore had scored, O’Flaherty’s run would have been unearned because he had advanced one base on an error
  • However, he did not.

In the sixth inning, the Indians scored two runs on four hits, one error, and left two men on base.

Sample Game: Top Of The Ninth

The Mariners scored the go-ahead run in the top of the ninth inning to win the game. Although they score two more runs in the eighth inning to tie the game at 7, the Indians fail to advance any further with the bases loaded. That will appear on the completed film, but you can skip forward to the start of the ninth inning if you so desire.

  • Jose Vidro gets things started with a single. To begin, write “1B” and a line to the left of the first. The Mariners then bring in Willie Bloomquist to serve as a pinch runner. It’s best to indicate this by placing his name beneath Vidro and the letters “PR” next to it. Pinch runner Ben Bloomquist is brought in during the ninth inning, so place a “PR” next to first base to indicate where he came in. Jose Guillen then hits a fly out to center field, so place a “8” in that box. Raul Ibanez then hits a double to bring Bloomquist home. “2B” should be written on his line, along with “RBI.” The Bloomquist diamond should be colored in to indicate the run scored
  • Kenji Johjima then hits a single, and Ibanez moves up to third. Draw a line from first to second for Johjima, and a line from first to second for Ibanez. Ben Broussard is up next, and he hits a fly out to right field to start the inning. Despite his best efforts, Ibanez is thrown out at the plate while trying to score from third. As a result, the score is 9-2 DP. A double play is made from right field to the catcher. Draw a line between home and third base on Ibanez’s diamond to indicate that he was thrown out at home.

Finishing Up And More

A single is hit by Jose Vidro to start the game. Add the letters “1B” and a line at the beginning of the first line. A pinch runner, Willie Bloomquist, is then called upon by the Mariners. Add his name beneath Vidro’s and the letters “PR” next to his name to indicate this. To indicate that the pinch runner entered from first base in the ninth inning, write “PR” next to the base; Jose Guillen then hits a fly out to center field, so write “8” next to the base; Raul Ibanez then hits a double to bring Bloomquist home.

  • Fill in the Bloomquist diamond to indicate the run scored.
  • Ben Broussard is up next, and he knocks a fly out to right field to start the inning off.
  • Therefore, the score is 9-2 in favor of the team.
  • To indicate that Ibanez was thrown out at home, draw a line from home to third base on his diamond.
See also:  How Much Does It Cost To Build A Turf Baseball Field

I Keep Score: A primer for baseball fans

“Baseball fans may be split into two groups: those who keep score at the game and those who have never taken the plunge. Paul Dickson’s performance in “The Joy of Keeping Score” I keep track of the points. It’s a t-shirt I saw someplace and laughed out loud as soon as I saw it because it was so funny. According to some, wearing this tee indicates that the user keeps track of his or her own life; nonetheless, for me, it represented what I do when watching baseball. I keep track of the points. During the 1870s, a sportswriter named Henry Chadwick earned the distinction of being the first person to use scorekeeping in a competitive setting.

  1. He is a hero in my eyes.
  2. It allows you to have a thorough knowledge of trends, streaks, changes, and improvements in real time.
  3. I enjoy having my own copy of the game’s scorecard.
  4. However, scorekeeping is quickly becoming a lost art, as the enormous HD displays at the stadium provide you with all the information you could possibly desire, and apps like as provide you with real-time information.
  5. However, I am unable to have a player sign my cell phone in order to photograph their MLB debut or their first home run.
  6. In a scorebook, I keep track of my own baseball career.
  7. A unique aspect of baseball is that the statistics are fed by the scorekeeping, which includes keeping track of how many runs, RBIs, homers, and other stats are scored and recorded on a baseball scorecard.

Over the last several years, I’ve observed an increase in the number of people who have inquired about scorekeeping at sporting events.

They want to know how I learned, if I do it every game, and if I keep score if I’m just watching on TV with my family.

It is this piqued interest that has led me to create – a primer of sorts on the art of scorekeeping.

Although not every scorecard will look the same and not every scorekeeper’s symbols will be the same, the fundamental principle of recording the plays you see in front of you on a piece of paper is the same everywhere.

However, if you want to be in position to score in tonight’s rubber match in Anaheim, this is the route to take.

There are many different types of scorecards available, but if you’re at the ballpark, you should stop by the shop and get one.

It’s possible that it’s the only thing remaining at the ballpark that you can get for a dollar, and I hope the price never goes up.

You may always add more if your scorekeeping skills improve and you grow more interested in other types of analytics.

The positions are identified on a scorecard by the number assigned to them.

At first base, that’s the shortstop getting rid of a runner.

The designated hitter does not receive a uniform number because he is never seen on the field.

Some will provide you with spaces to note the umpires who worked the game, the weather conditions at game time, and the number of people that attended the game.

When the game starts and the first batter steps up to the plate, it’s important to make sure you have your pencil and paper prepared.

First, let’s take a look at how to score outs.

Strikeouts- If a hitter is struck out swinging, the letter “K” should be written.

Batters hitting fly balls that are caught are easily identified by the use of a F and the position number of the fielder who caught the ball.

Some people omit the F and simply put the number of the location that caught the ball – it’s up to you which method you prefer.

Ground outs- If a hitter hits a ground ball that is then tossed from one player to another in order to get the batter out at first, you must record the names of the players that touched the ball and in what sequence they did so in order to get the batter out.

A double play that moves the ball from shortstop to second base and then first base is denoted as 6-4-3.

Caught Stealingis another another technique for a gamer to get out of a sticky situation.

(If the lines don’t make much sense at this point, just hang in there; we’ll get to the base path lines in a moment.) There are a variety of methods for a player to get on base, as well as a variety of ways to record each of them.

There will be a bright diamond drawn in on some scorecards, while others will be blank squares for each at bat.

Even while not everyone maps out base pathways, I strongly advise doing so since it provides a much clearer image of how the game truly went later on if you were to look back.

You draw a line from home plate to first base and write 1B on it whenever a hitter reaches first base; alternatively, you draw a line from home plate to first base and place one hash mark on the line from home to first.

Walk- To signal a walk, draw a line from the home plate to the first base plate and write “BB” for base on balls on the line.

If the shortstop makes a mistake with the ball or drops it, that is an E6.

The base path from home to first base should be drawn with the word “HBP” at the end of it if a player is hit by a pitch.

First, indicate that the hitter received only a single by writing “1B” or “single hash,” and then by writing “E3” or “error” on the line from first to second, indicate that an error was committed by the first baseman.

Here are the several methods a runner may improve and how to keep track of your progress on your scorecard in case you want to keep track of it later.

The jersey number of the batter who advanced the runner can be included, although it is not required, and most fan scorekeepers do not include such information.

Drawing the base path and adding “SB” along the base path line after a runner steals a base is a good way to keep track of who is who.

You can either write the jersey number of the player who batted in the run on that square or, alternatively, you can record an RBI on that square.

What Else Is There?

Things like demonstrating where an inning ends and what to do when a team is batting around are examples of what is included.

To indicate the end of an inning, simply draw a diagonal slash diagonally across the bottom right hand corner of the square, noting which batter was the last batter of the inning in the process.

That is entirely optional, and I recommend that you do not concern yourself with pitch count when you are first starting to keep score – that may come later when you become adept and obsessed.

As soon as this occurs, you just continue the inning into the next column, which is intended for the following inning.

You’ll also make use of those columns if you’re fortunate enough to attend a game that includes FREE BASEBALL, commonly known as extra innings.

Substitutions of players, pinch-hitters, and pinch-runners -When a player replacement is made, you’ll create a vertical line after the final at-bat of the previous player and place the name of the new player under the name of the original player who was in that position in the order at the time of the substitution.

In order to make tallying the figures at the conclusion of each inning more convenient, you should record the totals for each inning’s hit totals, runs totals, runners left on base totals, errors totals, and so on.

That’s all there is to it.

Depending on why individuals maintain score, we’ll take a look at some alternative scorebook types next week, as well as some varied ways in which people keep score. You’ll get an exclusive look inside the scorebooks of commentators, fans, and professional athletes.

The Beginner’s Guide to Keeping Score of A Baseball Game

Have you ever attempted to score a baseball game with only a piece of paper and a pencil? This time-honored ritual can be traced all the way back to the beginnings of baseball and can also be a really enjoyable way to become more engaged in the sport. In addition, maintaining score on a real scorecard results in a memento from the game – one that is not too expensive. Don’t be concerned if you’ve witnessed supporters keeping score by hand and found the entire procedure to be quite complicated.

To assist you in getting started, we’ve put prepared a little baseball scoring reference sheet that you can download and print.

Come with me as I learn how to score in a baseball game!

1. Get Your Card (and Other Supplies)

You’ll need a scorecard to get things started, of course. Scorecards are available for purchase at most nationally televised baseball games in baseball stadiums, as well as at most places where goods is sold in the stadium itself. These cards, on the other hand, are not free; they cost anything from $2 to $4 each card. To spend so much money on something as basic as a scorecard is astounding. Fortunately, there are locations where you can print your own scorecard from the comfort of your own home.

You may also purchase whole scorebooks on the internet.

Prepare your card by putting the batting lineups of both sides on the left side of the card, under the headings “Player” and “Batter.” Keep in mind to include both each player’s position number (which is generally listed under “Pos” or “Position”) and his or her jersey number (which is usually listed under “Num” or “”) in your roster.

2. Learn the Code of Baseball Scoring

There is a shorthand code used in baseball scoring, which was devised to make scoring a little bit easier at baseball games. It would be inconvenient to have to type out a tone of various sentences while consuming beer and being extremely physically involved in cheering for your team while doing so. Fortunately, this baseball scoring system is fairly simple to memorize and understand. If you don’t care for it, you may easily create your own code for keeping track of baseball games. Whatever the case, the typical procedure is as follows.


Each position has been allocated a number from 1 to 100. When writing down fielding plays, it is necessary to utilize the particular numbers listed above. Find out more about how to score based on your position.

  • A designated hitter is assigned to each position in the field. Right field has nine players, center field has eight, left field has seven, shortstop has six, third base has five players, second base has four, first base has three, catchers have two, pitcher has one.


When a hitter goes up against a pitcher, it’s important to maintain track of what he’s doing on the field. This abbreviation is widely used to indicate the outcome of a pitch competition.

  • K for a strikeout. Looking for a strikeout: “K” or “” written backwards
  • BB (short for “base on balls”) was walked
  • 1B was singled
  • 2B was doubled
  • 3B was tripled. Homerun: HR
  • Flyout: F
  • Double Play: DP
  • Homerun: HR

3. Begin Keeping Score of the Game

With a K, the game is over. The backwards K or the letter “” represents a strikeout. 1B; 2B; 3B; BB (short for “base on balls”); BB (short for “base on balls”); 1B; 2B; 3B; Walked a home run, a flyout, a double play, etc. a home run, a flyout, a double play, etc.

Double plays

K is the strikeout. Looking for a strikeout: “K” or “” backwards; Walked: BB (short for “base on balls”); single: 1B; double: 2B; triple: 3B; walked: BB (short for “base on balls”). Homerun: HR; Flyout: F; Double play: DP; Homerun: HR; Flyout: F; Double play: DP;

4. Make Your Scorecard Your Own

Congratulations, you’ve mastered the fundamentals of hand-scoring a baseball game with confidence! Once you’ve successfully learned and implemented these fundamentals, you may become creative and incorporate your own unique flare into your baseball scorekeeping. In all honesty, there isn’t a “bad” method to keep track of the progress of a game. The true value of self-scoring comes from identifying the most effective strategy for keeping track of your progress through the game as fast and painlessly as possible.

Now that you’ve read this, do you feel a bit more secure about keeping score at the next game your favorite team plays?

Photograph courtesy of Pixabay

Leave a Reply

Your email address will not be published.