How To Make Baseball Bracelet

Baseball Bracelet

This post includes affiliate links for your convenience. A baseball may be turned into a leather bracelet with a little creativity. Yes, you might now rethink your decision to simply stand there and watch that foul ball disappear into the weeds and not go after it! Alternatively, you could do what I did and use an old one from our ball bucket — with the approval of my husband and kid, of course. It would be heresy if I were to utilize one that was still in fine working condition. Because the one I used had broken stitching, I was confident that it was safe to use.

As a matter of fact, one baseball may be used to produce TWO bracelets.

You should absolutely use a real leather baseball in this situation.

You might also be interested in my Baseball Wreath Tutorial or my Painted Pumpkin Tutorial if you enjoyed this one.

Here’s what you’ll need to get started:
  1. Leather baseball
  2. Pencil
  3. X-ACTO knife
  4. Scissors
  5. Magnetic bracelet clasp
  6. Leather baseball

Time required: around 10-20 minutes. Children should not use the X-ACTO knife and should not handle the little magnetic clasp when making this simple project.

Directions

STEP 1: Locate a leather baseball and lace it up. Just don’t use one that has been autographed and has been sitting on a shelf. If you don’t want any hassle or if you want something that is clean and dazzling white, simply get one. (I’m experiencing flashbacks of the movie The Sandlot right now!) TO COMPLETE STEP 2, draw a line on either side of the red stitching using a pencil. Leave around 1/8′′-1/4′′ of space between the stitches. STEP 3Cut along the pencil line that you just created to finish the project.

  • And don’t be too concerned about obtaining a nice curvature right away.
  • STEP 4: After you’ve cut along both sides of the red stitches, pull away the leather from the inside of the stitching.
  • (This is the part that does not have stitching.) It should be rather simple to take off.
  • Isn’t it amazing how cool the insides are?
  • The ends of the stitches will be sewn into the ball during the weaving process.
  • 6th step: Notice how I’ve tied my bracelet with two knots on either side of the bracelet?
  • If you don’t like the way it looks, you may cut through the seams and untie the threads to create a bracelet that is just sewn together.

Whatever style you choose, you’ll need to fold the leather in half and then cut it in two again using scissors.

STEP 7 The two seams will be squiggly as a result of the previous step.

It is possible to massage it till it becomes straight because it is leather and supple.

The results were quite immediate, but I let my dry overnight on a flat surface and they were excellent the following day.

STEP 8Measure the band around your wrist and use your eyes to estimate the size of the bracelet you desire.

Only the leather should be trimmed using your scissors.

Make a beautiful curve at the ends of the leather.

Pick up one end of the bracelet strings and thread the four threads through the eye of the clasp.

Draw the strings on the other side of the knot together to form a tight knot.

Repeat the same with the other end of the bracelet and clasp.

It’s extremely simple and super adorable to put on.and to share.

In a single day, you may create a baseball bracelet!

This is the perfect gift for any baseball parent or fan. This post was created using thePin it for later feature. If you’re merely curious in what’s inside a baseball, here’s what you should know: My daughter came to your rescue. There’s plenty of string and yet another ball!

See you at the fields!

I seem to be at a baseball game almost every weekend, so I knew I wanted to wear something adorable and distinctive to my boys’ games. We had an unusually large number of baseballs in our garage, so I knew I wanted to try my hand at this craft. To begin, you will require the following supplies: a baseball (it can be new or used) Some form of clasp (I used this black one from Hobby Lobby’s Sew-Ology department), an adornment of some sort, thread, needle, and a cutting knife are all required. It’s possible that you’ll need pliers to assist you thread your sewing needle through the ball material.

  • Continue in this manner all the way around.
  • Make careful to remove all of the extra string from the interior of your pieces before storing them.
  • This will give you enough material to construct two bracelets.
  • Because my clasp is black, I’m adding black thread to complete the look.
  • It is necessary to follow the same procedure on both ends.
  • I made it a point to locate a decoration that I could sew on.
  • I’m really pleased with how this came out.
  • Alternatively, you may remove the red stitching and replace it with any other color of your choosing at the end seam.
  • I hope you enjoyed my project and will consider giving it a shot.

Baseball String Bracelet

Given that I seem to be at every single baseball game, I wanted to wear something adorable and unusual when attending my boys’ games. The fact that we had a plethora of baseballs in our garage convinced me that I should try my hand at this endeavor. You will need a baseball to begin with, as well as other items (it can be new or used) Thread, needle, and cutting knife, as well as a clasp (I used this black one from Hobby Lobby’s Sew-Ology section), an adornment of some type, and a sewing machine.

  1. As a first step, grab your knife and cut straight along the middle of the red thread seam.
  2. The pieces must be separated once they have been sliced along the whole seam.
  3. The pieces are now separated into two groups of two.
  4. Sew your clasp onto the end of one of the pieces using the end of the other.
  5. A bigger needle is also being used because we are stitching through a thick piece of fabric.
  6. Once you have seen your end clasps in place, you will need to view your ornamentation in the center of the garment.
  7. This is a section that will allow me to stitch up and through the cloth without catching on anything.
  8. The colors of your team’s uniform can be included into this bracelet design.

If you want to resew the end seam with a different color, I recommend using embroidery thread. I hope you all appreciated my project and will consider giving it a try in the near future.

Easy Baseball Bracelet

Baseball has always been a passion of mine. It is, without a doubt, one of my favorite sports. With three sons, I’ve spent a lot of time at baseball games, and I’m constantly wearing my fan fair tee-shirt. A baseball bracelet with the logo of my favorite club is one of my favorite pieces of jewelry to sport. They are quite simple to construct, and you can color match them for whatever team you want to support. Using this simple baseball bracelet as an example, I’ll teach you how to build one.

This post includes affiliate links for your convenience.

It will not increase your costs in any way, and it will allow me to continue to share my thoughts with you for free.

Thank you for your interest in and support of my blog!

Supplies To Make An Easy Baseball Bracelet:

The Acetone is depicted in the following photograph. It will remove all of the text from the balls that you do not want. (For instance, the name of a sporting goods business or the phrase “made in China”). It can also be used to clean up a particularly filthy ball. I poured a small amount into a plastic container, dipped a towel in it, and wiped it clean. It worked well. Here are the components I purchased to use in the creation of my baseball bracelets. Every single item on this list was acquired from Michael’s Craft Store.

  • Using the Epiphany circle cutter, the epoxy circle, the Royals logo, and clear rhinestones, we created this one.
  • rhinestone strips, the Epiphany circle cutter, epoxy circles, a bottle cap, and a Royals logo were some of the materials we used.
  • This locket was obtained in the jewelry area of Michael’s Craft Store, and we flipped it on its side to make the necklace.
  • Hot glue is used to secure the locket in place.
  • Want to make your baseball bracelet even more budget- and kid-friendly while yet keeping it stylish?
  • Here is a video tutorial that will teach you how to construct a baseball bracelet from start to finish!
  • Each and every one of you is an inspiration to me, and I adore seeing the work that you have produced.

I’d appreciate it if you shared it with me on Instagram, Twitter, or Facebook. Always remember to follow Diva Of DIY on Pinterest and to sign up for our FREE Newsletter to receive updates on the latest projects delivered directly to your inbox!

DIY Upcycled Baseball Bracelet

A picture of the Acetone is shown below for your convenience. Everything on the balls that you don’t want will be removed by using this program. – (“Made in China,” for example, or the name of a sports goods business.” It will also clean up a really filthy ball in a short amount of time. Then I put a small amount in a plastic bottle and dabbed it with a cloth to get rid of the stains. Listed below are the materials I used to create my baseball wristbands. Michael’s Craft Store was the source for all of these goods.

  1. As an example, here’s one we produced with an Epiphany circle cutter, epoxy circles, the emblem of the Royals, royal blue jewels, and clear rhinestones.
  2. A real beauty, this one.
  3. The simplicity of this design appeals to me.
  4. Using the necklace’s shank, I hung a baseball glove locket and placed a paper Royals logo in the spot where a photograph would have been.
  5. NOTE: I made this one out of an old baseball, and I really like the vintage appearance it has!
  6. Give them a Sharpie and let them express themselves in their own manner on the Royal Blue string!
  7. Please tell me about your favorite team’s celebrations.
  8. Your work is an inspiration to me, and I adore seeing what you’ve done with your time.
  9. Always remember to follow Diva Of DIY on Pinterest and to sign up for our FREE Newsletter to receive updates on the newest projects sent directly to your email.
See also:  How To Get Baseball Flow

Baseball Season Is Here And Every Fan Needs To Add This To Their Game Day Gear!

I think this is an excellent concept for all of us baseball enthusiasts out there! Given that the World Series is now taking place, this is ideal for those large gatherings to watch the game! Baseball season has begun for the smaller ones as well, and my eldest grandson is beyond thrilled. This year, I really wanted to do something special for him to show him how much I care about him and how much I support him. Having more than one grandchild means that you must discover unique ways to tell them that they are important, something that speaks to them on a personal level.

I was very taken aback when I discovered that you could construct a leather bracelet out of a baseball.

As a matter of fact, one baseball may be used to produce TWO bracelets.

You should absolutely use a real leather baseball in this situation.

These are also the best presents to give to that baseball fanatic in your life who has everything! In this step-by-step lesson, this girl from Show Me Cute demonstrates how to build a wonderful baseball bracelet. Then go out and grab yourself a baseball and get started.

Amazon.com: Authentic Baseball Leather Bracelet

On May 16, 2018, a review was conducted in the United States. Baseball-themed color schemeVerified purchase This bracelet appeals to me because it has a design that is quite similar to the red stitching on a baseball, which I find appealing as a baseball enthusiast. It is simple to put on because of the changeable (two snaps) settings. One issue I have with it is that the red stitching frays readily, which is a little inconvenience. In the long run, I can see things coming undone. Ideally, the string would have been waxed before being joined to the leather cuff, since I believe this would have increased its longevity.

  1. On April 4, 2019, a review was conducted in the United States.
  2. I also want to look well, and because my sons are on separate teams with various colors, I am always on the lookout for neutral items to complement their outfits.
  3. Delivery was quick, and the product was a great fit.
  4. Baseball-themed color schemeVerified purchase After only one time wearing it to my son’s baseball game, it appeared to be on the verge of falling apart.
  5. On May 9, 2021, a review will be conducted in the United States.
  6. Color: BaseballVerified PurchaseReviewed in the United States on March 14, 2020Color: Baseball Mine was torn because I caught it on something and it ripped.
  7. Color: BaseballVerified PurchaseReviewed in the United States on July 13, 2019Color: Baseball I bought this for my Grandson, who will be pitching for his college team in the near future.
  8. On February 19, 2019, a review was conducted in the United States.
  9. They are very lovely!
  10. Baseball-themed color schemeVerified purchase This is a great fit and looks great!

How Do I Make A Bracelet From A Baseball? 8 Responses For (2022), «Sport-Topics FAQ»

  • Baseball “fan” bracelet
  • Baseball “fan” bracelet video response
  • Baseball FAQ Some of the questions that people ask when they are seeking for an answer to the query «How do I build a bracelet out of a baseball?» are as follows: DIY baseball bracelet
  • 8 other answers
  • Your answer
  • 27 related questions
  • Video response:

Bracelet for a baseball “fan” in video formatFAQ Those who are seeking for a solution to the query «How do I build a bracelet out of a baseball?» are in the right place. The following questions are frequently asked:

❓ How to make a bracelet from a baseball seam?

What You Need to Know About Making a Baseball Seam Bracelet or Necklace from Baseball Laces This tutorial will show you how to build your own baseball seam bracelet or no-sew necklace.

  • How to build a baseball bracelet that is straight
  • How to make a baseball bracelet out of paracord
  • How to make a baseball seam bracelet

❓ How to make a baseball bracelet?

Wearing it will demonstrate your enthusiasm for the game!

The baseball stitch bracelets shown in this episode of Make it Cubs are made using a baseball stitch pattern. Make sure to share your masterpieces with others.

  • How to build a baseball stitch bracelet
  • How to make a bracelet from a baseball seam necklace
  • How to make a bracelet from a baseball stitch necklace Creating a bracelet out of the seams of an old baseball ring

❓ How to make baseball bead bracelet?

The following are the materials you will need in order to build a baseball bracelet: A baseball, a knife, and scissors that haven’t been used. Step one is to get the baseball ready. First and foremost, a baseball that has been abandoned for a long period of time is likely to be filthy, so attempt to clean it as well as you can; Second, draw the dotted lines alongside the seams with a pencil, and then cut as deeply as possible around the seams with a knife; 2nd step: removing the seams from the baseball bracelet

  • How to construct a baseball bag cuff bracelet out of a baseball bat
  • Make a cuff bracelet out of a baseball cap with these instructions. Making a cuff bracelet out of a baseball card is simple.

Making a baseball bracelet out of a baseball is demonstrated in the video. there are 8 more answers Paul Cartwright responded to your question on Saturday, June 26, 2021 7:34 PM. With the help of this DIY instructional video, you can learn how to make a Baseball Cuff Bracelet out of a Real Baseball. Hello, my name is Donna Wolfe and I’m from Naztazia. Charisse is a dear friend of mine. Jules Rodriguez responded to your question on Sun, Jun 27, 2021 6:57 AMA. about Press Copyright Get in touch with us Creators Developers should be promoted.

  • Demonstrate new capabilities.
  • Creators.
  • If you want to play on the outside of the ball, you can remove the leathers.
  • The interior strings can also be cut to the exact same length and braided together to construct a bracelet that resembles a baseball bat.
  • My favorite method of securing this bracelet is to tie the two ends together in a knot each time I put it on and take it off.
  • When you first put on the bracelet, the strings will feel sticky because of the glue that was used to adhere the leather to the ball, but this will subside after a few wears.
  • You’ll see that the baseball is all coiled up and in the shape of a figure eight when you remove the lengthy seam from it.

Despite the fact that I do this a lot in order to get it as straight as possible, I believe they will always have a slight bend to them.

Choose between 54, 96, 150, or 216 Cells to fill out your grid.

You may now pick between 54, 96, 150, or 216 as your number of digits.

Gudrun Krajcik responded to this question on Wednesday, June 30, 2021 at 11:32 a.m.

THE FIRST TOOL IS THE WRISTCOCACH / WRISTBAND PLAY CARD.

We have finally made the switch to full regulations, BBCOR bats, adult-sized players, and everything else that comes with the “big diamond.” Answered by Breanne Lakin on Wed, Jun 30, 2021 11:48 PMPut one hole on either end of the belt and one hole in the middle.

It’s time to put the snaps on the shirt! Follow the manufacturer’s directions, which are printed on the back of the box. When you believe the snap is well fastened, give it another solid whack with the hammer to double-check.

  • Don Bragg Sports Complex, Don Leyo Sport Bar, herbies hockey drill, a 500 kilogram sports automobile, dingers batting cages, and how to shrink hockey gloves are all discussed. Sports and studies are both equally important, according to Kyle TX and De ware Tijd Sport. A rod bat gs25, which sport uses the lightest ball, John Henry Smith Wvit and SportsareFree Kodi, a 450 kg hockey puck, how to shorten a baseball swing, baseball legend melvin thomas crossword clue, and more are all included. Pegasus faggio sport
  • Barna bellack cup
  • Yugioh 5ds ar codes
  • European mountain running championships zermatt
  • How to pronounce ellesse brand
  • Bangalore blues challenge cup
  • Baseball boy online
  • Gta faggio sport
  • A 1000 kg sports car accelerates
  • Can chiropractors perform sports physicals in California
  • Atpi sports events canada

We’ve compiled a list of 27 questions that are similar to «How do I build a bracelet out of a baseball?» so you can be sure to get an answer. A baseball cap may be transformed into a cuff bracelet with some creativity. Watch as Adrianne demonstrates how to use the new ImpressArt Bracelet Bending Bar and blanks to create a nature-themed cuff bracelet that can be completed in less than ten minutes. M. What is the best way to construct a cuff bracelet out of a baseball jersey? Made with Love by the Diva of DIY |

  1. Baseball Signs and Symbols Baseball-Related Crafts Baseball Posters are available in a variety of sizes and styles.
  2. Watch as Adrianne demonstrates how to use the new ImpressArt Bracelet Bending Bar and blanks to create a nature-themed cuff bracelet that can be completed in less than ten minutes.
  3. What is the best way to construct a baseball lace bracelet?
  4. What You Need to Know About Making a Baseball Seam Bracelet or Necklace from Baseball Laces Instructions on how to make your own are provided in detail.
  5. Using your red paracord, pull out the inside strands approximately 1/2 inch and cut them off.
  6. In this position, grasp the paracord case with your other hand, then stroke your fingers along the length of it, overlapping the interior strands as you do so.

Video answer: Diy: baseball bracelet!

What is the best way to build a baseball stitch bracelet? Wearing it will demonstrate your enthusiasm for the game! The baseball stitch bracelets shown in this episode of Make it Cubs are made using a baseball stitch pattern. Make sure to share your masterpieces with others. What is the best way to build a baseball string bracelet? You can do it yourself: How to make a baseball bracelet! Convert an old baseball into a bracket with this simple technique. Usually, one bracelet will yield two bracelets!

See also:  When Is Baseball Season 2017

Video answer: How to make a baseball seam bracelet or necklace

What is the best way to construct a leather baseball bracelet? How to manufacture a leather cuff bracelet out of a baseball is the subject of this two-part instructional video. If you have any concerns regarding this lesson, please contact me through email at the address below. What is the best way to build a baseball stitch paracord bracelet? You may learn how to build a Baseball Themed Center Stitched Paracord Bracelet on YouTube.

What is the best way to construct a baseball seam bracelet? Instructions for Making a Baseball Seam Bracelet or Necklace (Using Laces) – YouTube. What You Need to Know About Making a Baseball Seam Bracelet or Necklace from Baseball Laces Instructions on how to make your own are provided in detail.

Video answer: How to make a baseball cuff bracelet from a real…

How can you construct a baseball bracelet with a rainbow weaving in it? Making a basic Rainbow Loom bracelet is demonstrated in this Rainbow Loom lesson, which will help you get started with the technique. This basic bracelet is not only simple to construct, but it is also colorful and pleasant to wear. Instructions on how to construct a baseball stitch bracelet are provided below. This Baseball Themed Center Stitched Paracord Bracelet will help you get ready for the baseball season! Stormdrane created the original design, which has been color-adapted to seem like the letter s.

  1. Liam at Justin’s Toys created this rainbow bracelet, which is a more sophisticated design that can only be completed using the Rainbow Loom Kit’s original loom.
  2. How can you build a baseball stitch paracord bracelet from start to finish?
  3. This tutorial will show you how to make a Trilobite Paracord Bracelet that has a baseball theme.
  4. Share.
  5. Information, shopping, and more.
  6. How to construct a baseball bracelet step-by-step instructions are provided.
  7. Please subscribe by clicking on the SUBSCRIBE button to receive new video updates.

How to Make a Baseball Bracelet (with Pictures).

He’d best be careful with saws and knives, or he’ll lose his job.

Greetings, my name is Leanne Lee, and I’m here to tell you that it’s Blue October here in Kansas City, so be creative!

Baseball season has arrived, and every baseball lover should have one of these bracelets.

What is the best way to construct a bracelet out of baseball lace?

What is the best way to build a bracelet out of baseball stitching?

What You Need to Know About Making a Baseball Seam Bracelet or Necklace from Baseball Laces Instructions on how to make your own are provided in detail.

A Cm is an abbreviation for So what?, you could ask.

I’ve mastered my rock movements and don’t require your assistance.

I’m fine for the time being F m D I’m perfectly OK, and you’re a piece of work. A Cm is an abbreviation for So what? I am a superstar F m D A, so what? My rock movements are ready, and I don’t want you to come over tonight. Uh, double-check my flow, A5 You didn’t play fairly, did you?

Video answer: How to: make a baseball lanyard or bracelet

What’s the point of a baseball bracelet as a meme? Baseball bracelet tutorial that you can make yourself! Convert an old baseball into a bracket with this simple technique. Usually, one bracelet will yield two bracelets! So, what movie is it that has a baseball bracelet? The new owner of the Cleveland Indians puts together a purposefully bad team in the hopes that they would lose and that she will be able to sell the franchise. However, after the scheme is discovered, they begin to win only for the purpose of humiliating her.

  1. Ward.
  2. Total revenue: $49.80 million Definitely my favorite baseball film to see is “The Greatest Show on Earth.” It was difficult to pick between them.
  3. Greetings to everyone.
  4. Please follow the link and place an order for a copy.
  5. How to construct a baseball stitch bracelet step by step with pictures and instructions.
  6. What is the best way to make a bracelet out of a used baseball?
  7. Convert an old baseball into a bracket with this simple technique.

Video answer: How to make a baseball bracelet

They are made by hand with 108 stitches, which takes around 10 minutes. As soon as the ROMLB’s are sewn, they are machine rolled for 15 seconds to flatten the stitching. Once the Rawlings brand, Major League Baseball logo, and commissioner’s signature have been imprinted on the balls, they must be dried for one week.

How do you make a baseball wreath?

Each of the 108 stitches takes around 10 minutes to complete by hand. ROMLB’s are machine-rolled for 15 seconds after they have been sewn to flatten the stitching. Once the Rawlings trademark, Major League Baseball logo, and commissioner’s signature have been imprinted on the balls, they must be allowed to dry for one week before being used.

How do you make a ankle bracelet?

They are made by hand with 108 stitches and take around 10 minutes. As soon as the ROMLBs are sewn, they are machine rolled for 15 seconds to flatten the stitching. The Rawlings brand, Major League Baseball logo, and commissioner’s signature are then imprinted into the balls, which are then left to dry for one week.

How do you make a simple rubber band bracelet?

They are made by hand using 108 stitches, which takes around 10 minutes. Once sewn, the ROMLB’s are machine rolled for 15 seconds to flatten the stitching. After that, the Rawlings trademark, the MLB logo, and the commissioner’s signature are imprinted into the balls, which are then left to dry for one week.

Why do baseballs have 108 stitches?

What is the significance of the 108 stitches on a baseball? The number of stitches on a baseball is dictated by the size of the baseball.

The size of the baseball, as well as the form of the cowhide that is utilized, both influence the number of stitches that are required. The 108 threads are double sewn together, resulting in a total of 216 stitches in the finished ball.

What do umpires rub on baseballs?

It has been years since the New Jersey mud has been utilized to clean baseballs before every game, but it hasn’t prevented pitchers from employing a foreign material from time to time. Instead of enforcing the regulations, Major League Baseball is exploring an alternative approach: utilizing baseballs that are easier to handle.

How do you attach a baseball to a wreath?

It has been years since the New Jersey mud has been used to clean baseballs before every game, but that hasn’t prevented pitchers from employing a foreign material on occasion. A alternative approach is being considered by MLB, rather than enforcing the rules: utilizing baseballs with improved grip.

Are baseballs still made in Haiti?

Rawlings, the official maker of baseballs for the major leagues, has been in operation in Haiti since 1969, when the company relocated manufacturing from its previous location in Puerto Rico. However, the corporation has gradually shifted its activities away from Haiti since 1986, ceasing manufacture of baseball gloves in 1986 and clothes in 1989, respectively.

Baseball “Fan” Bracelet | DIY | ShowMeCute

Baseball bracelets for men are a great gift idea. phiten necklaces and bracelets for guys made of rope baseball necklaces bracelets made of rubber rastaclat baseball necklace with a number on it

About The Author

During the previous baseball season, Little Devil and I constructed bracelets out of actual University of Oklahoma foul balls, which we wore around our wrists. Yes, the same ones she’s been catching throughout the course of her years of devoted baseball attendance. They were a big hit, and we ended up making extras to give to our Baseball Mom-Friends as gifts. The baseball bracelets I’ve been making have become so popular this season that I though I’d share the instructions in case any of you were interested in making one for yourself.

It’s important to look good while we’re sweating it out on the bleachers, after all!

Take Me Out To The Ball Game. In my cute lil’ Baseball Bracelet!
Here’s what you’ll need for this project: A baseball red embroidery floss Exacto Knife elastic cord big needle felt in a color you like cute button (with a shank, not a flat button) clear fabric glue
Begin by carefully cutting along the baseball seams. You can see where the leather is sewn together.Try to cut right down the center.
Now that the seams are cut, start peeling awaythe baseball.You’ll have two figure-8 shaped pieces. Enough for two bracelets. Pick away all the thread from the holesso you have a clean, neat baseball pieceto start stitching on.
Thread your needle with all 6-strands of the embroidery floss.Just tie a knot in the end. Make sure the knot is on the back of the baseball. (You won’t see it in the end.) Now just whip stitch around the edges ofthe baseball using the holes that are already there.
Continue whip-stitching until the entire baseballpiece has new red stitches around the edge.
Lay the baseball flat onto a piece of felt.Trace around the shape with a pen.This will make the lining of the bracelet. Not only does it look better, making a finished product, it hidesthe knots and fasteners.AND, you’ll notice the backside of the baseball is sticky.You don’t want that stuck to your arm on a hot, sweaty Saturday!
Now cut out your piece of felt.You’ll probably wind up cutting it just a little smaller.You want it to lay flat and fit nicely on the backside of the bracelet, but you want it tohide the knots from your whip stitching. DON’T glue it down yet.You’re almost finished.
Sew your button on one end of the bracelet. Just use a couple of holes at the end.Come up through one hole, thread your button on, and godown through the next hole.Now tie a knot on the back so the button is tight and secure.
See?Like this.Now your pretty button is on top of the baseball, and ready to create the fastener.
On the opposite end of the bracelet, attach a small piece of the elastic cord to create aloop.This is what fastens on to your buttonto close the bracelet.I like for it to have just a little bit of stretch to fit over the button.That way your bracelet will fit snugly and not come off.
See also:  Who Won The Nationals Baseball Game Last Night
Now you are ready for the glue.You just need a little. It helps that the back of the baseball is already sticky. Make a small, thin layer on the back of the baseball and place your felt backing on.
See how that hides all of the knots from your sewing? And the ugly knots from the elastic?
Let the glue dry and you are all set. Put your bracelet on and wow everyone at the game!
You can wear it either way.With the button at the top or the bottom!
Know what’s really cute? Get your favorite baseball player to autograph your bracelet! Now you REALLY have a one of kind!

It was shared at CALL ME PMC’s Marvelous Monday Link Party, which you can find here. Because Life After Laundry is less about laundry and more about linking up!

DIY: Baseball Bracelet

This project was shared at the Marvelous Monday Link Party hosted by CALL ME PMC. and Less Laundry, More Linking Party in Life After Laundry!

Softball/Baseball Themed Paracord Bracelet

I coach my daughter’s U12 softball team, and as a sort of fun thing for her, I created her a pararcord bracelet with a softball motif on it as a keepsake. For starters, the first day she wore it to practice all 14 of the girls said “I want one!” as though they were all in agreement. As a result, I felt forced to create an additional 14 pieces. There are several tutorials available for creating a stitched solomon bar bracelet, but I was unable to locate any that were specific to this particular style.

Step 1: What You’ll Need

I coach my daughter’s U12 softball team, and as a sort of fun thing for her, I created her a pararcord bracelet with a softball motif on it as a little treat. For starters, the first day she wore it to practice all 14 of the girls said “I want one!” in seemingly unison. In order to fulfill my obligation, I made another 14 of them. Many techniques are available for creating a stitched solomon bar bracelet, but I was unable to locate any that were specifically for this style.

I suppose you could consider this merely an addition to the many other (and undoubtedly superior) tutorials and Instructables that are already available online.

Step 2: The Trick: Splicing Colors

When I originally started thinking about making one of these, this was the portion that had me a little perplexed. how to get a single crossing strand of color to run the length of the bracelet without having the color appear anyplace else on the band Splicing! It turned out to be rather simple. Here’s how it’s done: Using your red paracord, pull out the inside strands approximately 1/2 inch and cut them off. Hold the other end of the paracord between your index finger and your thumb, with the other end of the rope facing you.

  1. Spread the ends of the casing apart to make them more flared.
  2. WARNING: BE CAREFUL!
  3. Re-melt the end of the red cord that you just molded and insert it into the hollow end of the cable.
  4. There will be a small amount of red fringe around the outside of the splice; melt this down with your lighter and then roll it between your fingers once more.
  5. It is important to note that this form of splice drastically reduces the strength of the paracord, making it unsuitable for use as anything other than a decorative item for the majority of people.

Step 3: The Core and the Jig

When I initially intended to construct one of these, this was the portion that got me a little perplexed, but now I understand. how to get a single crossing strand of color to run the length of the bracelet without the color appearing anyplace else on the band Splicing! Actually, it turned out to be rather simple. It works like this: Then, using your red paracord, pull out the inside strands approximately 1/2 inch and cut them off. In between your index finger and your thumb, hold the other end of the paracord in place.

  1. The casing’s ends should be flared out as much as possible.
  2. ALWAYS USE CAUTION.
  3. Re-melt the end of the red cord that you just molded and insert it into the hollow end of the cable that you just formed.
  4. There will be a small amount of red fringe around the outside of the splice; using your lighter, melt this down and then roll it between your fingers again.

It is important to note that this form of splice greatly reduces the strength of the paracord, making it unsuitable for use as anything other than a decorative item for most applications. For a survival emergency, this type of design is not really appropriate.

Step 4: Starting With a Cobra Hitch.

Using your spliced cord, place it on the jig but under the core, and align the splice so that it is exactly in middle of the core. Pass the red wire over the center of the core. Cross the yellow cable over the red cord on the same side of the jig as you did with the red cord. Bring the yellow cord’s tip under the core and through the loop created by the red cord when it was passed over the core. Repeat with the other yellow cord. Make sure to tighten it down while keeping the splice in the center of the jig/core position consistent.

To get it positioned and tightened, adjust and tighten as necessary.

Okay, now that you’ve mastered the cobra knot, it’s time to move on to the solomon stitch technique.

Step 5:.Moving Into the Solomon Stitch

This knot is remarkably similar to the cobra knot, with the exception of one minor difference. This is the stitch that will be repeated throughout the entire length of the bracelet, but this is how to begin it going. Make a pass with your red paracord, passing it under the strand closest to the red and over the strand farther away from it. Repeat this process with the other colors of paracord. Leave a little amount of surplus cable to form a loop through which the yellow cord may be threaded.

  1. Make a loop with it and pass it under the red cable, through the core, and through the loop made by the red cord, and then tighten it up.
  2. Again, use caution as the splice is still susceptible to breaking if the cord is tugged too hard.
  3. Leave a little amount of surplus cable behind to form a loop through which the yellow cord may be threaded.
  4. Make a loop with it and pass it under the red cable, through the core, and through the loop made by the red cord, and then tighten it up.

Step 6: Solomon Stitch, Repeat. Solomon Stitch, Repeat.

It should take around 15 to 18 repetitions of the preceding technique to completely fill the length of your bracelet and leave about a 1 inch portion near the overhand knot vacant. The solomon stitch pattern will be completed with another cobra knot, as seen in the pictures: take the red cord and pass it over the core. Place the yellow cord across the red cord on the same side of the jig as the red cord and tie a knot.

Pass the yellow cable under the red cord and under the core, through the loop on the opposite side of the core that was created when you passed the red cord over the core, to complete the loop. Put as much pressure on here as you possibly can, and your stitching is complete!

Step 7: Finishing With a Cobra Hitch, Trimming and Sealing the Ends

After you have finished sewing, take the bracelet from the jig. It will feel a little stiff due to the tightness of the knots, but that is exactly what you want. You will need to remove the extra string from the solomon stitching on the bracelet to make it fit properly. Cut the red string at the end of the bracelet with a pair of scissors or a utility knife, leaving a nub of cord approximately 1/4 inch long at the end of the bracelet. Melt the chord for a good 5 seconds with your flame, till you get a molten glob at the end of it.

THIS PART DOES NOT REQUIRE THE USE OF YOUR FINGERS.

Make it as smooth as possible because it will be in direct contact with your skin.

Step 8: Almost Done!

Remove the bracelet from the jig once you’ve finished sewing. If you tighten your knots enough, it will feel stiff, which is exactly how you want it to feel. To remove the surplus string from the solomon stitching on the bracelet, cut it with scissors. Cut the red string at the end of the bracelet using a pair of scissors or a utility knife so that there is a nub of cord approximately 1/4 inch long at the end. Burn the cable for about 5 seconds, until you get a molten glob sticking out of the end of the cord.

THIS PART IS NOT TO BE COMPLETED WITH YOUR FINGERS!

Consider making it as smooth as possible due to the fact that it will come into contact with your flesh.

Step 9: The Finished Product(s)

My time decreased from 45 minutes to around 20 minutes from start to finish after making about 20 bracelets for my team, the other coaches, and a couple of parents who were pleased with them after I had completed about 20 of them in all for them. In the end, I decided to make all of the splices and cores first and then assemble them, which appeared to help move the process of manufacturing several of them along a little more quickly. I hope you have a good time making them for your teams, friends, or even for yourself.

Have a good time!

Be the First to Share

Leave a Reply

Your email address will not be published.