How To Properly Break In A Baseball Glove

How to Break in a Baseball Glove

“It’s all about the mon-aaaayyy,” a wise man once said. The Major League Baseball season does not halt for the Olympics, unlike Nippon Professional Baseball, which is Japan’s premier baseball circuit, which closes down for two weeks to allow its stars to represent the United States in the Games. Teams are generally adamant about not allowing their best players to represent their countries in the Games. A regulation permitting players in MLB clubs who are not currently on the 40-man roster to participate in games was adopted in 2020 by the Major League Baseball, the Major League Baseball Players Association, and the International Baseball Federation.

Simply said, Major League Baseball and its teams do not want to lose money by not having their stars on the field or by putting themselves at danger for long-term injuries.

Due to the lack of big-name athletes in the Olympics, Major League Baseball proposed a new tournament with the purpose of growing the game, which became known as the World Baseball Classic and was held four times.

After the coronavirus epidemic struck, the tournament’s 2020 edition was moved out to a later date.

In the words of Harper, as reported by ESPNin 2020, “It is really a disgrace.” Japanese athletes will compete at the 2020 Summer Olympics.

“Are you serious?” I exclaimed.

Ok, that’s a little ridiculous.


Pour a tiny quantity of hot water (150 to 170 degrees Fahrenheit) over any areas of your new glove that you would want to be softer (for example, the thumb). It is not recommended to soften your glove in the microwave or with detergents, since this might cause harm to the leather of the glove. Use a tiny quantity of glove oil, applied with a sponge, to achieve the same results. Glove oil should never be applied directly to the glove. It has the potential to be too concentrated at the place of application, resulting in a wet and heavy patch.


Once the glove has been drenched with warm water or glove oil, begin bending the thumb and pinky back and forth toward and away from each other to begin breaking in the stiff regions of your mitt.

Squeeze the index and middle fingers together. The rear fingers should be pushed down, and the palm liner should be squeezed. Pulling on the web top will allow it to extend a little. To ensure that your glove is totally dry, repeat the process six to eight times more.


With continued usage, your glove should begin to soften in the same way that other leather goods do. You may assist speed up this process by pounding the pocket where you would catch the ball with a wooden mallet or a 5-pound neoprene dumbbell to soften the glove. In addition, pound the web to produce a fold in the area where you want your glove to break. In addition to helping to create a good valley for the ball to fall into, it may also aid to smooth out any undesirable creases for a smooth pocket finish.

Pounding the pocket also helps the leather to adjust to your palm for the ultimate break-in experience by making it more flexible.


Placing a ball in the pocket of your glove and wrapping it with two or three rubber bands can keep it secure. The bands should be quite snug, but not too tight, and should overlap one another to make a “X” shape when they come together. Allow four to five hours for your glove to get set in this manner. When your glove dries, this will aid in the formation of the desired shape and prevent the glove from reverting to its original shape. After you have removed the ball from the pocket, pound the pocket once again to work the pocket even more.


When it comes to breaking in a baseball or softball glove, the most enjoyable way is to simply throw it around as much as you possibly can. By playing catch in a series of rounds, your glove will gradually begin to conform to your hand, with the leather becoming looser with each catch. Playing catch on a consistent basis will be the most effective method of ensuring that your glove becomes used to your hand structure, as no amount of oil, cream, or pummeling therapy can compete with a good old toss when it comes to reproducing genuine game sensations.

In-store glove steaming is available to assist enhance the playability of your mitt in a matter of minutes.


When it comes to breaking in a baseball or softball glove, the most enjoyable way is to just throw it around as often as you can. Throughout several rounds of catch, your glove will gradually begin to conform to your hand, and the leather will gradually become looser with each catch as well. No amount of oil, cream, or pummeling will be able to compete with a good old tossed ball when it comes to duplicating genuine game sensations. Playing catch day in and day out is the most effective method of ensuring your glove breaks in to your hand structure.

To further increase the playability of your mitt, take advantage of their in-store glove steaming service.

How to Break in a Baseball Glove (The Right Way) –

Investing in a high-quality baseball glove is one of the most essential decisions a baseball or softball player can make about their game. It may make a significant difference in your overall performance if you select the proper glove for your position and playing style. While no one glove can transform you into a great defender, selecting one that fits properly and feels comfortable may help you gain more confidence on the field and produce plays that are more clean and consistent in their execution.

Even if you choose a model that is somewhat below the “elite” level, you should expect to pay between $150 and $250 for a quality leather mitt.

One component of this is ensuring that it is properly broken in.

Unfortunately, there is a lot of disinformation out there about the appropriate and wrong procedures, and if you aren’t cautious, you might end up doing more harm than good.

Here, we’ll discuss how to properly break in a baseball glove and why many of the most popular approaches are really counter-productive.

How to Break in a Baseball or Softball Glove

Investing in a high-quality baseball glove is one of the most essential decisions a baseball or softball player can make in their sport. It may make a significant difference in your overall performance if you select the proper mitt for your position and play style. While no one glove can transform you into a great defender, selecting one that fits properly and feels comfortable may help you gain more confidence on the field and produce plays that are more clean and consistent in their execution and execution.

A quality leather mitt will cost you between $150 and $250, even if you choose a model that is somewhat below “elite” standard.

That includes breaking it in correctly, which is an important component of it.

Because there is so much disinformation about the correct and wrong procedures, it’s easy to end up doing more harm than help if one isn’t cautious.

Why Do Baseball Gloves Need to be Broken In?

A high-quality baseball glove is one of the most critical purchases a baseball or softball player can make in their game. Choose the proper mitt for your position and playing style to maximize your performance. While no one glove can transform you into a great defender, selecting one that fits properly and feels comfortable may help you gain more confidence on the field and make plays that are more clean and consistent. That assurance, however, comes at a high expense, with top-tier baseball and softball gloves often costing $300 to $400.

As a result, many players and parents (particularly those who are purchasing their first high-quality glove) are curious about how to properly care for it.

By understanding how to properly break in a baseball glove, you can assure that it will last and function well for many years to come.

In this essay, we’ll discuss how to properly break in a baseball glove, as well as why many of the most prevalent ways are ineffective.

How to Break in a Baseball Glove – The Right Way

A high-quality baseball glove is one of the most important investments a baseball or softball player can make in their sport. Choosing the proper mitt for your position and playing style can make a significant difference in your overall performance. While no single glove can make you a better defender, selecting one that fits properly and feels comfortable can help you gain more confidence on the field and make plays that are more clean and consistent. However, that assurance comes at a high cost, with top-tier baseball and softball gloves typically costing $300 to $400.

As a result, many players and parents (especially those who are purchasing their first high-quality glove) are interested in learning how to properly care for it.

Knowing how to properly break in a baseball glove will ensure that it will last and perform for many years to come.

In this post, we’ll discuss how to properly break in a baseball glove, as well as why many of the most common methods are counter-productive.

How to Break in a Baseball Glove Fast

When it comes to breaking in a glove, a mix of warm water and manhandling is the most efficient method. Shigeaki Aso, a glove expert for Wilson Sporting Goods and one of the world’s foremost authorities on the subject, explains the procedure in the video below. What you’ll need is the following:

  • A pail of hot water (not boiling)
  • A pair of rubber gloves a cup of anything
  • A softer surface (such as a cushion or a rug)
  • Glove mallet/glove hammer (optional).

However, it’s important to note that, despite Aso’s well-deserved reputation, there is considerable controversy about the effectiveness of his technique in general. Aso is a highly skilled leather craftsman who creates some of the best gloves available anywhere in the world. He’s well aware of what he’s doing. Using water to soften the leather makes it simpler to work with, but if the water is not applied appropriately, it might leave the leather dry and brittle. So, if you decide to go this route, make sure to follow the directions to the letter – and keep in mind that making a mistake might result in damage to your mitt.

  • Glove mallet from the Mizuno brand, with a rounded end.
  • Using this method, you may loosen up the leather and make it more pliable.
  • With the glove still slightly damp, you want to concentrate on applying as much pressure as possible to the region indicated by the yellow arrow in the illustration below.
  • It is at this point that the glove mallet is utilized.
  • Another fantastic approach to form the pocket from here is to place your hand in the glove and use the mallet to shape the pocket.

Other Tools and Methods

Steaming your glove is a simple, quick, and effective method of cleaning. The technique, on the other hand, has the potential to harm the leather’s fibers. It is for this reason that steaming will void Wilson’s one-year glove guarantee.) Using steam on your glove can soften it, but it will also decrease its durability. In addition, players frequently report that steamed leather fails to maintain its form, instead continuing to break in until it becomes almost too soft to handle. So, if you’re looking for a game-ready glove right now, this would be a good alternative.

Expect the glove to last you little longer than a season, at the very most. Allowing Dick’s to steam your glove is the quickest and most convenient option. During the steaming process, there are three processes involved:

  1. Glove conditioner will be applied by the technician, which will allow the pores on the leather to open up and soften throughout the steaming process. The technician will place the mitt in a glove steamer, which will soften the leather, allowing it to be more pliable. Taking the mitt out of the bag, the technician will begin striking it with a mallet, loosening up the crucial places. It is likely that this process will be repeated several times.

Glove Wrapping

A good supplemental approach to aid in the break-in of your glove is to wrap it around your hand. There are two schools of thought on how to wrap a gift: one believes that a ball should be placed in the pocket and the other believes that it should not. The only one of those suggestions is right; you should always wrap your glove around a ball that is in the pocket. (You may find out more about why this is the case in the section on the mattress approach, which follows.) Wrapping your glove is a simple technique that takes only a few minutes.

  1. The glove is closed (with a ball in the pocket) by bringing the pinky and thumb together. Make a secure closure for the glove by wrapping it with thread, elastic, rubber bands, or anything else that will keep it in that closed position. Allow it to rest for a couple of days before unwrapping it and repeating the procedure
See also:  Where Do Baseball Players Live During The Season

Wrapping the glove stretches the leather and retains it in place for a longer amount of time, making it simpler to deal with in the future.

Glove Conditioners and Oils

Conditioning and nourishing oils for gloves can be used both during and after the break-in process. The first rule of thumb when it comes to utilizing glove conditioners and oils is to only use items that have been approved by the manufacturer. Don’t apply Vaseline, petroleum jelly, chapstick, or olive oil on your glove since they will harm and/or saturate the leather, according to the manufacturer (leaving it greasy, heavy or dried out). The following are five of the most popular conditioners on the market.

  1. Nokona Classic Leather Glove Conditioner
  2. Mizuno Strong Oil Glove Conditioner
  3. Rawlings Glovolium Glove Treatment
  4. Wilson Pro Stock Glove Conditioner
  5. Wilson Pro Stock Mink Oil Paste
  6. Wilson Pro Stock Mink

It’s important to remember that a little goes a long way with oils and conditioners. For the most part, you’ll only need to apply a thin layer of coating and gently massage it in with a clean cloth. Essentially, the purpose of these items is to keep leather in good condition while also, in certain instances, softening it. Using too much can result in saturation, which can result in the glove becoming ruined. Another thing to consider is that, in most cases, you will not be required (or even desired) to soften your glove’s webbing, which is typically thinner than the glove’s body and should break in quite rapidly on its own.

The Wrong Way to Break in a Baseball Glove

We discussed a few alternative strategies for breaking in your new baseball glove in the section above. It’s time to go through some of the things you should certainly avoid doing (under any circumstances).

Don’t: Microwave or Bake It

Microwaves and ovens are only used for cooking food. Gloves are made of leather, and leather does not include any food ingredients. So let’s avoid using the glove in the microwave or the oven! Some people believe that baking leather in an oven softens it. That may be true at first since heat makes leather more pliable, but it is not always the case. Hot air, on the other hand, has a tendency to be dry — and this is particularly true of the hot air that comes out of an oven.

When you bake a glove, the moisture in the leather is drawn out of the leather. That implies that when the glove cools down, it will be completely dry to touch (and sometimes, brittle). A Wilson A-2000 that had been abandoned in an automobile.

Don’t: Leave Your Glove in the Car

Cooking using a microwave or an oven is a food preparation technique. Gloves are made of leather, and leather does not include any food ingredients. Keep the glove away from the microwave and the oven, please. According to some, putting leather in the oven will soften it up. Heat may make leather more pliable, which may appear to be the case at first glance. Generally speaking, though, hot air may be drying, which is certainly true of the hot air that comes out of an oven. It is necessary to bake a glove in order to remove moisture from the leather.

It was an A-2000 Wilson that had been left in an automobile.

Don’t: Use Shaving Cream

Barbasol shaving cream, which may be used as a conditioner, is one of the most commonly recommended methods for breaking in a glove. Lanolin, a natural oil derived from sheep’s wool, was used in the manufacture of shaving cream back in the day. Lanolin, it turns out, is a fairly effective leather conditioner. However, lanolin is no longer found in virtually all shaving products nowadays. Barbasol shaving cream contains a trace quantity of alcohol, but not a significant amount. Every jar of shaving cream contains an inordinate amount of chemicals and artificial substances that were not intended for use on skin or in the treatment of leather.

It’s possible that you’ve already figured out that dryness is the adversary of a properly maintained glove.

Besides that, some of the chemicals contain substances that can actually break down and weaken the fibers of leather, making it less durable.

Don’t: Put Your Glove Under a Mattress

If you are having trouble breaking in a glove, one of the most recommended solutions is to apply Barbasol shaving cream as conditioner on the glove. Shaving cream used to include lanolin, which is a natural oil derived from sheep’s wool. Interestingly enough, lanolin works rather well as a leather moisturizer. However, lanolin is no longer found in nearly all shaving products. This ingredient is found in very small quantities in Barbasol shaving cream (not enough to make a significant difference).

Using shaving cream during the glove break-in process results in what happened next.

The chemicals in shaving cream, just like heat, have the ability to draw moisture from leather surfaces.

Frequently Asked Questions

Here are some of the most often asked questions on how to break in baseball gloves, as well as the answers to those queries. What is the best way to break in a baseball glove overnight? Breaking in a baseball glove overnight is not only dangerous, but it may also be detrimental to its leather construction. In principle, submitting a glove to extremely high temperatures (such as an oven) or extremely high pressure (such as being driven over by a car) may soften it in that amount of time. That said, using such procedures will result in a dry, misshapen mitt that performs badly and is not very long lasting.

Is it possible to break in a baseball glove with shaving cream?

Glove conditioners such as triethanolamine (an alcohol), isobutane (an industrial gas product), sodium lauryl sulfate (a detergent), and propane are ineffective since they include chemicals and components that dry out the leather over time.

How to Break in a Baseball Glove Properly – Conclusion

As you begin to work on your new baseball glove, keep in mind that it will take some time for it to become comfortable. People are always eager to provide suggestions for ways to expedite the process, but such suggestions can sometimes cause more harm than good. Grabbing balls with a glove is the most effective approach to break it in quickly. Every alternative approach carries its own set of dangers and drawbacks, and it is best avoided if at all feasible. If you don’t require the glove to be game-ready right away, you can use it during warmups until it is ready to be used in the game.

Using oils and conditioners in moderation while caring for your mitt can keep it looking its best.

The Hitting Vault is the most popular, most trusted and highest rated online hitting community.

It was developed in order to teach athletes how to use their bodies in order to unlock their most powerful swing possible. Its purpose is to assist coaches in obtaining the best possible results from their players. Become a member and you’ll get access to over 200+ special videos for members, as well as step-by-step instructions, so you’ll know exactly what you need to do next to unleash your power at the plate. Today is the day to try it out and enjoy your first trial week for just $1. 1 Hour Coaching Clinic with MLB Hitting CoachWatch Clinic Now Available for FREE

How to Break In a Glove

Step I: Prepare warm water (warm, not boiling) and pour it into the glove’s pocket or palm with the finger side up to ensure that water does not get inside the finger stalls. The water will make it simpler to stretch the leather, which will allow you to more efficiently form the glove as a result. The glove should be placed such that the rear fingers are towards your chest and pointing up. Step II: Grab it between your thumb and pinky and squeeze, jerking each side back and forth a few times.

  1. Stretch the glove out by grasping it by the tops of the pinky and the thumb of your right hand.
  2. If you don’t want your finger top lace to be too loose, don’t strain on it too much at this phase.
  3. Step IV: Before commencing this process, consider the position you play and if you like a deep or shallow pocket for your cards.
  4. Finish by closing your glove and striking it with your mallet around the W emblem on the thumb side of the glove, moving it back and forth.
  5. (Optional) Fill the web top with your fingers and squeeze for five to six seconds to form a ‘S’ shape with your fingers.
  6. This aids in loosening the web top lacing, making it even simpler for your glove to shut exactly the way you want it to be closed.

Step VII:Complete the break-in process by throwing a catch. Would you want to watch the Aso glove break-in procedure in action? Watch the entire video in the player above.

How to Break In a Baseball Glove Overnight – Myths and Truths

It’s possible that this is your very first baseball recollection. A parent or someone you look up to offers you a glove and informs you that this glove is now yours to keep and use. But first and foremost, you must break it in. The term “breaking in” a baseball glove raises certain questions. What exactly are you expected to do? What is the best way to tell whether it has been broken into? And what kind of tools should you utilize to get it started? There are many different kinds of myths out there, and it may be difficult to distinguish between myths and realities.


A mallet is used.

Now, let’s separate the myths from the realities and figure out what it means to properly break in a baseball glove.

Why Break in a Baseball Glove at All?

When it comes to breaking in a baseball glove, two characteristics are important: flexibility and malleability. When you get a new baseball glove, it is likely to feel a little stiff at first. The stiffer it is, the less control you have over the movement of the glove, and vice versa. This impairs your ability to make an effective catching maneuver. Each catch will be more controlled if you can get the glove to adapt to your motions as much as possible throughout the catch. Stiffness is the enemy in this situation.

A baseball glove must be able to accommodate two different things.

Every outfielder also understands the importance of having a glove that fits well in your hand.

Breaking in a Baseball Glove: Myths and Truths

When you purchase a new baseball glove, you will immediately note that it exhibits all of the characteristics of new-baseball-glove syndrome. It’s stiff, it’s not form-fitting, and it’s not even really comfy right away, to put it mildly. Myth: It’s impossible to break in a baseball glove quickly. We’ll give this one a half-point for effort. What they’re really saying is that it’s tough to break in a glove as soon as you would want. However, it is possible. During the two-hour journey to a game, there have been reports of catchers putting forth extra effort to make their mitt more flexible.

The truth is that a glove that has been broken in is more comfortable.

It’s like putting on a new pair of shoes for the first time.

They are even capable of causing blisters.

This is a subject that is up for dispute. Using a glove mallet or glove hammer, softening the glove with hot water, and essentially pounding up the baseball glove until it’s closer to the shape you need, for example, is recommended by a leather craftsman. Glove steaming may be recommended by others.

How Do You Break in a Baseball Glove Overnight?

First and foremost, you can do a great deal to break in a baseball glove without having to play catch a thousand times in a row every day. In fact, it’s probably in your best interests to do so. In an ideal situation, you’ll have several weeks to break in a baseball glove. While wearing your new glove, you may notice something odd about it, such as the way it fits your pinky or the way the pocket of the glove isn’t quite set. You can do a lot to break it in overnight by putting it on and off several times.

One method for breaking in a baseball glove quickly

Make sure you have the proper equipment. It will be required to use a bucket of hot water. A cup, a soft place on which to work, and either a glove mallet or a glove hammer to assist in breaking it in would also be beneficial. Make use of the hot water. Pouring it over the glove (as opposed to soaking it in, which would over-saturate the glove) would just soften the surface, allowing you to deal with it more easily and effectively. Use the “hinge” of the glove to complete your task. The region of the glove where the padding beneath your thumb is located is critical in this situation because if this area is not flexible, it will be difficult to properly wrap the glove around a soccer ball.

See also:  What Happens If You Get Hit In The Head With A Baseball Bat

This approach does not ensure that you will be able to race with a glove that is properly fitted to you.

Can You Use Shaving Cream to Break In a Baseball Glove?

You can, and in certain cases, it may be better to other ways due to the fact that shaving cream will not do as much damage. In terms of how “broken in” your glove is, though, it won’t have a significant impact. Adding another ingredient here will very certainly improve your chances of getting more of the broken-in effect you desire. Some people, for example, may let their baseball glove sit with a softball inside it to assist decide the form of their baseball glove. Others, however, are not in agreement with this strategy, mostly because they are attempting to catch baseballs, not softballs.

It takes a lot of pressure and a lot of time to achieve the “lived-in” look you want.

Can You Use Vaseline to Break In a Baseball Glove?

Baseball players are fully aware of this since it is one of those “old- timer’s” tactics that they have heard about before. The concept is straightforward: applying Vaseline to the outside of your glove will assist to soften the leather, making it more malleable and accepting to fresh feedback. However, when a manufacturer provides explicit suggestions about what you should use, this becomes an issue. When this occurs, do not apply Vaseline. In certain cases, you may discover that it reacts with the glove in a way that is detrimental to the glove’s long-term longevity.

  • Vaseline used shortly before a game, for example, will only slightly soften the glove while making it slippery, according to the manufacturer.
  • Keep in mind that Vaseline is considered a “conditioner.” It is not enough to just apply Vaseline to the affected area.
  • The term “conditioner” refers to something that helps soften your hair in the same way that a conditioner could.
  • However, in order to take use of this pliability, you’ll need to provide the baseball glove with extra feedback (for example, by inserting a baseball inside it).
  • It should only be used in little quantities.
  • Only when you want to construct the glove later on should you condition the glove.
  • Using tactics such as wrapping a ball inside the glove and tying rubber bands around it can help you make the most of the time you don’t have to use it, which will save you money in the long run.

You should also avoid over-applying a conditioner if you’re currently using one. This implies that you should avoid using Vaseline on a regular basis, and if you do, avoid using so much that it totally saturates the glove.

Can You Use Olive Oil to Break In a Baseball Glove?

Olive oil is frequently lumped in with Vaseline as a moisturizer. Some ball players’ “home cures” say that you should break in your glove with olive oil, and that it may also be used as a glove conditioner. You can discover these suggestions on the internet. However, you’ll want to make certain that you follow the instructions provided by the glove maker first. Otherwise, handle olive oil in the same manner as you would Vaseline, as described above. That entails being aware of how to use it properly, using it as a “conditioner” rather than a particular breaking-in product, and otherwise minimizing your exposure to it.

Should You Steam Your Baseball Glove?

Sure! This is an excellent approach for causing the least amount of harm to the glove while simultaneously increasing its flexibility for working with. When it comes to glove steaming, one method is to use the conditioner that was advised by the glove maker. Afterwards, you steam the glove until it is soft enough to work with without tearing it. You’ll next use a glove mallet to break in the glove, making it much simpler to fold over a ball when it comes your way in the future.

What Oil Can I Use to Break In a Baseball Glove?

Glove oil made by the manufacturer is generally the finest option. Manufacturers do not provide these recommendations at random; they do it in order to assist you in avoiding damage to the glove. After all, it is their desire that you will appreciate the goods and that you would submit a nice review for them on Amazon. Sure, you can learn everything about microwaving and utilizing warm water for a variety of at-home cures from books and the internet. Furthermore, several oils, such as olive oil, are frequently advised as conditioners for the hair.

There is no alternative for the passage of time.

How Many Gloves Do MLB Players Go Through in a Year?

It’s difficult to get exact data on this, but on average, major leaguers will receive two gloves each spring training. One of these gloves is the “main,” which means it’s the one that will be broken in over the offseason. The second one serves as a backup in the event that the first one fails. Some major leaguers may go through even more of these, breaking in new gloves using gimmicks like petroleum jelly or a wooden mallet, as well as other minor leaguers. Everyone appears to have their own set of tastes.

It’s important to have trust in your glove when a big-time hit comes off of a baseball bat, or whether you’re practicing outfielding against a hitter on a pitching machine.

A glove that has been properly softened and broken in is vital for every position in baseball, whether you’re playing shortstop or first base.

Similar Posts

What is the number of stitches on a baseball? What is the purpose of baseball players chewing gum? Can umpires be thrown out of the game? Baseball Has Unwritten Rules Baseball has unwritten rules. Using Mud to Rub What is the Infield Fly Rule, and how does it work? What is the purpose of athletes wearing eye black? How to Become a Major League Baseball Umpire What does a Minor League Baseball player make in a year? What exactly is a Balk? Assignment has been assigned to you. In baseball, what exactly is a putout?

Breaking In A Glove

New baseball gloves are frequently stiff and not yet ready to be used in a game setting. Even gloves that have been customized to your playing style, such as custom baseball gloves or custom softball gloves, must be broken in before they can be used on the field for the first time. Many baseball players are curious in how to properly break in a baseball glove, as well as which ways should be avoided. We’ll guide you through best practices, things to bear in mind, things to avoid, and even show you what the experts do in the sections that follow.

Traditional Methods

When breaking in a new baseball or softball glove, purists adhere to established procedures. They just play catch with their gloves for a number of hours each day for several days or weeks until the glove is properly broken in. Despite the fact that this procedure takes longer, it naturally breaks in your glove better than any other approach, and other methods can speed up the process if you want to rush it. Overall, no matter what you do to break in your glove, the more you can play catch and practice with your mitt, the faster it will break in and become more comfortable.

Baseball Glove Oils and Conditioners

When thinking about how to break in a baseball glove, one of the best places to start is by softly applying a thin coat of glove oil to the palm of the hand. Glove oil keeps the leather “alive,” while also providing a softening condition and helping to protect the leather from gaining weight. Apply about a dime-sized amount of glove oil to a sponge or cloth, and then use the sponge or cloth to apply the oil to the regions of the glove that are currently stiff, as shown in the illustration. Begin with the palm and work your way up to the breakpoint of the glove and finally the web of the glove.

  1. Make care to massage the glove oil into the leather in an equal fashion.
  2. Instead, apply the glove oil to the glove’s interior.
  3. Failure to do so may lead them to begin to fracture and the webbing to become loose, resulting in them being unstable.
  4. When it comes to deciding what sort of oil to put on your glove, the majority of individuals (even professionals) go for shaving cream.
  5. It is recommended that you continue to use glove oils and conditioners once your glove has been broken in throughout the season.

However, you must avoid going overboard. Oil should be applied three to four times throughout the season to get the desired results. Then, for the greatest storage results, add oil to your glove one more time before putting it away after the season.

Work the Rigid Parts

When it comes to physically working a glove, many players are also unsure of how to properly break it in properly. One of the most effective methods is to stretch the tight spots and work the leather to aid in the breaking up of the leather. The thumb and pinky are two of the areas that are the most constricting. It is beneficial to pull these sections of the glove towards and away from one another. This aids in the loosening of the binding and leather, allowing the glove to squeeze and catch the ball more effectively.

It is important to vary the amount of manipulation you do with the fingers depending on how tight you prefer your finger laces to be.

Soften and Shape the Glove

When it comes to softening and molding a glove, wooden mallets are frequently utilized. Pounding the pocket can aid in the formation of a ball shape, allowing the glove to get more used to gripping a ball. Pluck the glove in various places to loosen the leather and get it ready for play. Make sure you place a ball in the pocket to evaluate the size and form before continuing to soften and shape the leather using a wooden mallet to achieve the best results.

Important Points to Remember

  • The use of too much glove conditioner/oil can harm and decrease the life of a fresh glove. During this time, in a warm environment, let the glove oil to seep into the leather. Play catch every day until the glove is ready to be used in a game. Use only a little amount of the glove oil
  • You may always add more afterwards. Apply glove oil to your glove towards the conclusion of the season to prevent it from becoming brittle. Maintain the form of your glove by storing it in a dry area with a ball in the pocket. Use of neat’s foot oil, linseed oil, or silicon-type spray is not recommended. It is likely that this will cause leather to dry, stiffen, and grow heavy as a result of the closure of the pores. When it comes to breaking in a glove, there is no shortcut
  • Playing catch is still the best method. To avoid overconcentration of the glove oil at the place of application, first apply it to a piece of cloth and then apply to the glove
  • The most difficult leather to break in will almost certainly be a high-quality leather. It is not recommended to break in your baseball or softball glove in the oven or microwave. This will cause irreparable harm to your glove. Do not leave your glove outdoors or in your car while you attempt to break it in
  • Instead, go to a safe location.

Another Method

When it comes to learning how to break in a baseball glove, many individuals prefer to consult with the experts. A professional baseball player will occasionally break in a glove in a manner that is contrary to the recommendations of the glove maker. In order to prevent your gloves from wearing out faster, glove manufacturers do not recommend this practice. Due to the fact that professional baseball players typically receive their gloves free of charge, they are less concerned with lifespan and more concerned with a short break-in time.

  • First, they soak their glove in a pail of extremely hot water for 1-2 minutes, then remove it from the water.
  • Infielders often have one baseball in their pocket, whereas outfielders typically have two baseballs in their pocket.
  • Following that, they will place their glove in a dryer to dry it while the baseball(s) are still in their pocket.
  • After that, they will untie the glove and work in shaving cream containing lanolin, or glove oil, into the glove.
  • In order to utilize glove oil, apply it to a sponge or a cloth first, then use the sponge or cloth to apply the oil to the portions of the glove that are currently stiff.
  • Then, using the glove oil, apply it to all other sections of the glove, including the whole inside, to help moisturize and preserve it.
  • It is now time to begin pummeling the glove with a baseball bat.

Breakpoints should be pummeled in order to make the glove loosen up even more. This will expedite the process, but you will still need to play a lot of catch and use the glove in order to have it completely broken in. Keep in mind that using this approach will reduce the lifespan of your glove.

Shop for Your Next Glove

* Do you need assistance in locating the ideal baseball glove or softball glove? Please contact one of our qualified Glove Experts through email at [email protected], Live Chat, or toll-free phone number: 1-866-321-4568!

See also:  What Is The First Half Of A Baseball Game

How to Break in a Baseball Glove: Step-by-Step Guide

The truth that gloves need to be broken in before they can function to their full capacity can be attested to by anyone who has played baseball for more than a year or two. When it comes to breaking in and softening your glove, there are a variety of options available. Some of these approaches can be used alone, while others can be used in combination with others. Continue reading to learn about the many techniques for breaking in your glove, as well as the various methods for lubricating gloves.

  • Getting Catcher’s Mitts and First Base Gloves Used to Each Other

Breaking in Fielding Gloves (Baseball or Softball)

You’ll probably realize right away that your fielding glove is rigid and lacks the pocket necessary to collect fly balls and ground balls with ease once you’ve determined your suitable size and style, as well as after you’ve purchased your fielding glove. Forming a pocket in your glove is an important part of breaking in your glove. Forming a pocket may be accomplished in a variety of ways, and the most effective strategy is totally dependent on player choice. There are some gamers who swear by the microwave (although we do not encourage it), while others feel there are better ways to prepare the food.

Here are a few examples:

Tried and True or Traditional Method

You’ll probably notice right away that your fielding glove is rigid and lacks the pocket necessary to collect fly balls and ground balls with ease once you’ve determined your suitable size and style and purchased it. Forming a pocket in your glove is an important part of breaking in your glove’s cuffs. Creating a pocket can be accomplished in a variety of ways, and the most effective strategy is totally dependent on player taste. There are some players who swear by the microwave (although we do not encourage it), while others feel there are more effective methods.

Examples include the following:

Glove Steaming

Glove steaming is a tried and true approach that has been proven to be effective. This is typically regarded as the second-best approach, after playing catch, for catching a ball. Steaming the glove helps to relax the leather and seams, allowing it to be more game-ready before use.

The glove steaming process typically involves the following steps:

  1. Glove conditioner should be applied to the glove to assist in opening the pores in the leather. Steam the glove until it reaches around 150 degrees. Using a glove mallet, break in the glove’s opening

If you happen to be in the vicinity of a MonkeySports shop, you may stop by and get your glove steamed by one of our knowledgeable staff members.

Manhandling a Glove

Come in to a MonkeySports shop if you chance to be in the neighborhood and one of our experts can steam your glove for you.

Here’s what you need to do:

  1. Put the glove on in the same way as you would typically do
  2. Make use of your throwing hand to hold the mallet and strike the glove’s pocket on a consistent basis. Take the glove off, place it palm side down on the floor, and strike the rear of the glove
  3. This will help to break in the glove even more.

Other methods may instruct you to wet the leather and lay it out in the sun, but we recommend that you avoid using water and sunlight in this process and instead follow the steps outlined above.

The methods described above may all be utilized to break in your baseball fielding glove. The same tactics will apply if you’re wondering how to break in a softball glove; just be sure to use a softball instead of a baseball to guarantee that your pocket ends up being sufficiently sized.

Additional Tips for Breaking in Your Baseball or Softball Glove

When looking at how to break in your baseball glove, you may find yourself down a trail of false information. There are several beliefs, the most of which are incorrect, concerning how to break in your baseball glove quickly. The fact is that the most effective method of breaking in your glove simply requires time and effort. Here are a few additional pointers to keep in mind when breaking in your glove.

Using Baseball Glove Oils and Conditioners

Even though they are not strictly a break-in procedure, glove oils and conditioners are materials that may be used to soften leather baseball and softball gloves without the need of other methods. If you’re thinking of breaking in your glove with oils and conditioners, the first thing you should know is that items like Vaseline, petroleum jelly, extra-virgin olive oil, mink oil, and linseed oil are never recommended. If you intend to use oils or conditioners on your gloves, you should stick to the items that your glove manufacturer recommends using.

Some conditioners are created particularly for leather and are only available through specialized firms.

Apply a thin layer of paint to the glove and massage it in.

How to oil your baseball glove:

  1. Use only the oils and conditioners indicated by the manufacturer. Don’t overdo it with the oils. Remember that a little goes a long way
  2. Avoid using items that are not recommended for use with leather or that are known to dry out fabrics.

Best Baseball Glove Oils and Conditioners

Following up on our earlier discussion, we only advocate utilizing oils and conditioners that have been authorized by the manufacturer. Specific varieties of leather must be handled in a specific way, or they will become damaged if not treated properly. Here are some of the top glove oils and conditioners to choose from: We have oils and conditioners available for purchase in theGlove Accessoriessection of our online store if you wish to give them a try.

Glove Wraps and What They Do

The process of breaking in your glove does not come to a stop after that. While the procedures outlined above assisted you in forming a pocket in your glove, you are not yet finished. You’ll still need to wrap your glove, so be patient. Learning how to wrap a baseball glove is a simple process.

Final steps that will fully prepare your glove for baseball and softball action:

  1. Fold your glove in half to protect your hands. The pocket is formed at the point where you see the crease beginning to develop. To begin, fold the glove in half starting at the point where your pinky sits
  2. Continually fold the pinky side of the glove inwards toward itself. Once the glove has been folded in on itself, use a glove wrap, an old set of glove laces, or a pair of shoe laces to secure the glove in place and maintain the folded form. If at all feasible, you should utilize a glove cover that has been designed expressly for this purpose. You can also choose to wrap your glove around a baseball or softball that is placed in its pocket. The use of a softball will result in a larger pocket, which is necessary for people who play slowpitch or fastpitch softball, respectively.

What NOT to do When Breaking in Your Glove

As you read popular baseball or softball forums and articles on various websites, you may come across some fairly unconventional techniques of improving your game. Although many people believe that these break-in procedures are a quick way to soften up a glove, in the long term, they may actually reduce the life of your glove. Some of these strategies may even result in the voiding of the glove’s manufacturer warranty, which is included with the purchase. Here are some of the “tips” that you should avoid at all costs.

Microwaving/Oven “Method”

This is one of the most popular methods of breaking in a glove, although it has the potential to cause irreversible harm. It is possible that using a microwave or an oven can dry up the leather and make the laces brittle, resulting in them breaking. The use of microwaves and baking gloves in the oven is extremely risky, and should not be done. It has the potential to start a fire if left untreated. If your glove has any metal elements, the danger of injury is enhanced.

If you don’t intend to eat your glove for dinner, avoid using the microwave and the oven to prepare it. As an example, consider what happens if you bake your glove in the oven or microwave – both gloves were the same size before they were baked in the oven:

Inside the Car

Similarly to the microwave approach, keeping your glove in a hot car can cause the leather to dry up, causing the laces to become brittle and snapping off (however the chances of your car catching on fire are far less than burning down your kitchen). Keep your hands on the steering wheel at 10 and 2, but leave the gloves at home.

Breaking in Catcher’s Mitts and First Base Gloves

The procedure by which you should break in your catcher’s or first baseman’s glove is quite similar to the process by which you would break in your fielding glove. In particular, catchers and first basemen will find that merely using the glove will be the most effective way. a great deal! Running catch and bullpen sessions will get the task done the most efficiently, albeit not necessarily the quickest way to get it done. Listed below are a few suggestions to bear in mind:

  • There aren’t many differences between the process of breaking in a catcher’s or first baseman’s glove and the general procedures you’d follow to break in a fielding glove. Using the glove will be the most effective way for catchers and first basemen in particular. really much so! Running catch and bullpen sessions will get the task done the most effectively, albeit not necessarily the quickest. To help you, here are a few pointers to remember:

Good luck with your new glove, and remember to follow the instructions in our baseball glove care guide to maintain your glove in peak condition! That’s all there is to it! Remember to visit our online store for a broad selection ofbaseball and softball gloves with which you can put your newly acquired break in abilities to the test, as well as all of our other informative how-to tips.

How To Break In A New Glove

There’s nothing quite like the feeling of receiving a fresh new baseball glove. It’s hard to forget the first time you took it in your hand and smelled the fresh leather on it. In order to get a stiff new glove into playable condition, you must first get it into game condition. First and foremost, let us discuss what NOT to do – Don’t put it in the oven or microwave, for starters. Ever. The laces get brittle and break. Trust me on this: I’ve relaced three brand new gloves whose laces had been ruined by clients who, in effect, cooked their glove in the oven.

Consider the following scenario: you have just spent a significant amount of money on a high-quality glove, and you want to run a 2,000-pound truck over it.

3–Avoid smearing it with oil.

In addition, oil collects in the glove, making it a little heavier.

And, ultimately, the oil will begin to degrade the leather’s structure.

This is, without a doubt, the most effective method of breaking in a glove.

In the case of baseball gloves, especially catchers’ mitts, it’s OK to use a mallet to pound the pocket of the glove.

Just make sure you don’t overdo it.

I normally recommend that you keep it in your pocket; other people prefer to keep it on the outside of their fingers.

Several of these creams, including Gloveolium, are available for purchase through Professional Baseball Instruction in our pro shop (a fine Rawlings product).

4, insert a ball and secure the glove with a rubber band; alternatively, insert it between a mattress and a bed spring.

5– Take a look at 1. Play catch with it. In the event that you have any questions, please do not hesitate to contact Jim Monaghan at PBI. Consider the following recommendations from PBI’s Doug Cinnella if you’re in the market for a new glove:

Leave a Reply

Your email address will not be published.