What Does Hit The Cycle Mean In Baseball

Hit for the Cycle: Every MLB Player Who Hit for the Cycle

When a player hits a single, a double, a triple, and a home run all in the same game, this is referred to as an official cycle. Completing the cycle, sometimes known as “hitting for the cycle,” is an extremely unusual event in Major League Baseball, and every player who has achieved this feat is included in the table below. Baseball Almanac conducted the research. The American League Players Who Hit for the Cycle and the National League Players Who Hit for the Cycle are the best places to check if you want to see every official cycle, divided up by leagues and listed alphabetically.

They are the Pirates (24 games), the Giants (23) and the Red Sox (14 games) (22).

You may not have known that when Darrell Ward hit for the cycle on May 26, 2004, he and his father, Gary Ward (who had hit for the cycle on September 18, 1980), were the first father-son combo to each hit for the cycle in baseball history?

Did you know that on October 8, 2018, Brock Holthit hit for the cycle during Game 3 of the American League Division Series, making it the first time in the history of the playoffs that a cycle was hit during any sort of postseason game?

Look no further.

In our Hitting for the Cycle Record Book, we have MANY more versions like this, as well as MANY more.

What Does Hitting For The Cycle Mean in Baseball – Why is it Rare?

“Hitting for the cycle” is an uncommon and exciting occurrence in baseball, and it is one of the most difficult to achieve. It’s possible that you’ll hear this phrase during a baseball game, but what does it mean? When a baseball player in Major League Baseball completes a cycle, this article will explain all you need to know about what it implies.

What Does Hitting For the Cycle Mean in Baseball?

It is possible for one hitter to hit for the cycle in the same game by hitting singles, doubles, triples, and home runs all at once. The hits, on the other hand, can be in any order. Hitting for the cycle has only occurred 333 times as of September 4th, 2021, which means that it occurs in fewer than 1% of all baseball games, making it an extremely unusual accomplishment. Cycles occur on a par with no-hitters in terms of frequency. Only 27 players have ever completed a cycle throughout their careers.

In the history of Major League Baseball, no more than one player has ever hit for the cycle in the same game. However unusual, the Miami Marlins are the only MLB organization in whom a player has never hit for the cycle, despite their numerous attempts.

What Does a Natural Cycle Mean in Baseball?

Within a single baseball game, a natural cycle occurs when a baseball player hits the cycle in the proper sequence. This means that they hit a single, double, triple, and home run in that order during the course of a single game.

What Does a Reverse Cycle Mean in Baseball?

In baseball, a reverse natural cycle is just the opposite of the normal cycle. It’s the same when a baseball player hits a home run, then a triple, a double, and a single, all in the same game, and the sequence continues. The sequence of a natural cycle is simply reversed in this case. If you are a player who has struck the reverse cycle, you can look at this website.

What Baseball Player has Hit the Most Cycles in Their Career?

The most cycles struck in a career is three, which is the current record.

  • Bob Meusel hit three cycles for the New York Yankees in 1921, 1922, and 1928
  • Adrian Beltre hit one cycle for the Seattle Mariners in 2008 and two cycles for the Texas Rangers in 2012 and 2015
  • Bob Meusel hit three cycles for the New York Yankees in 1921, 1922, and 1928
  • Bob Meusel hit three cycles for the New York Yankees in 1921, 19 Beltre hit for the cycle with three different teams in the same ballpark, Globe Life Field, making him the only player to do so with three different teams in the same ballpark
  • Babe Herman hit for the cycle with the Brooklyn Robins twice, both in 1931, making him the only player to do so with three different teams in the same ballpark. Trea Turner hit three cycles for the Washington Nationals in 2017, 2019, and 2021, all while playing for the Chicago Cubs. He previously hit a cycle for the Chicago Cubs in 1933. In 2017, Turner was just 23 years old, making him the second-youngest player ever to hit a cycle in Major League Baseball history
  • John Reilly also hit three cycles, all for the Cincinnati Reds, two in 1883 and one in 1890, but these were all hit before the modern era
  • And John Reilly also hit three cycles, all for the Cincinnati Reds, two in 1883 and one in 1890, but these were all hit before the modern era

What Baseball Player Hit the First Cycle?

Curry Foley, while playing for the Buffalo Bisons of the National League in 1882, became the first player in baseball history to complete an official cycle. Besides a home run in the first inning, Foley also had a triple in the second, a single in the third, and a double in the fifth innings to help his team win. However, there is still controversy about whether George Hall, playing for the Philadelphia Athletics in 1876, was the first to complete a cycle.

Most Recent Player to Hit for a Cycle?

On August 18th, 2021, Freddie Freeman of the Atlanta Braves became the most recent player to complete a cycle. This particular game was against the Miami Marlins, and Freeman finished with a cycle in only six innings. Jake Cronenworth of the San Diego Padres hit a cycle against the Washington Nationals in 2021, which was the most recent cycle to occur before Freeman.

Interesting Baseball Cycle Trivia

Christian Yelich, an outfielder with the Milwaukee Brewers, made history in 2018 by becoming the first player in Major League Baseball history to hit for the cycle twice against the same opponent in the same season. In the span of three weeks, he hit for the cycle twice against the Reds of Cincinnati.

Notable Hall of Fame Players to Hit for the Cycle

As of August 2021, a total of 65 Baseball Hall of Famers have hit for the cycle throughout their careers. Here’s a short sample of some of the names on that list, just to get you started. If you want to see the whole list of Hall of Fame players who have hit for the cycle, you can do so by clicking on this link. Finally, there are baseball players such as Mike Trout, Adrian Beltre, Nolan Arenado, Shohei Ohtani, and others who have hit for the cycle and who will very certainly be inducted into the Hall of Fame one day in the near future.

  • Jim O’Rourke, Bid McPhee, Roger Connor, Sam Thompson, Honus Wagner, Jimmie Foxx, Lou Gehrig, Ted Williams, Joe DiMaggio, Mickey Mantle, Carl Ripken Jr., Kirby Puckett, Vladimir Guerrero, and many others.

Has a Baseball Player Ever Hit for the Cycle in a Postseason Game?

It’s important to remember that hitting for the cycle is an uncommon accomplishment! The Boston Red Sox’s Brock Holt is the only player to hit for the cycle during the postseason’s first week. In the ninth inning of Game 3 of the 2018 American League Division Series against the New York Yankees, he hit for the cycle for the first time in his career.

Has a Baseball Player Ever Hit for the Cycle in an All-Star Game?

In the history of the MLB All-Star Game, no player has ever hit for the cycle.


Briefly stated, hitting for a cycle occurs fewer than one percent of the time throughout a baseball game.

Getting four hits in a baseball game is difficult, but getting four hits in a cycle is even more difficult. If, on the other hand, you are fortunate enough to watch a cycle during a baseball game, consider yourself fortunate!

Similar Posts

What is the definition of an RBI in baseball? In baseball, what exactly is a Grand Slam? In baseball, this is referred to as RISP. What is the World Series in baseball, and how does it work? wOBA in baseball The Mendoza Line is a railroad that runs through Mendoza, Argentina. What exactly is a Balk? In baseball, what exactly is the strike zone? Baseball’s On-Base Percentage (OPS) The average batting average in baseball Baseball with the Fly Rule in the Infield MVR In baseball, a triple play is called a triple play.

In baseball, what exactly is the Triple Crown Award?

What is the length of a baseball game?

In baseball, what exactly is a perfect game?

What Does Hitting For The Cycle Mean?

Baseball players of all ages dream of driving in the game-winning run, hitting a walk-off home run in the postseason, or even putting dread in the hearts of their opponents by being deliberately walked to end a game. The cycle, on the other hand, is the goal that all hitters strive for throughout their careers. What is the cycle? Like a bicycle, perhaps? What does riding a bicycle have to do with baseball, you might wonder. No need to be concerned; here at JustBats.com, we have all of the information you could possibly need about hitting for the cycle.

What does hitting for the Cycle mean?

When a batter hits a single, double, triple, and home run all in the same game in baseball or softball, he or she is said to be batting for the cycle. When a hitter accumulates the hits in that order, it is referred to be a natural cycle, and it has only occurred 14 times in the history of Major League Baseball.

Hitting for the Cycle History

A baseball player’s ability to hit for the cycle is an exceptionally unusual accomplishment. In the history of Major League Baseball, the regular cycle has only been completed 319 times. To put this exceedingly unusual achievement into perspective, there have been around 210,000 professional baseball games played, and only 319 of them have seen a player hit for a single, double, triple, and home run, all in the same game. The cycle for a batter is equal to the no-hitter for a pitcher, while the natural cycle for a batter is equivalent to the perfect game for a pitcher, among other things.

Hitting for the Cycle Fun Facts

Now that you understand what it takes to hit for the cycle and how unusual it is for players to do it, here are some interesting facts regarding who, where, and when cycles have been hit for in baseball.

  • Curry Foley of the Buffalo Bison was the first player to hit for the cycle, doing it in 1882. Reilly, Meusel, Babe Herman, and Adrian Beltre are the players who have hit for the cycle the most times. Reilly, Meusel, Herman, and Beltre have all hit for the cycle three (3) times. The most recent player to hit for the cycle was Jose Abreu in September of 2017 against the San Francisco Giants
  • The most cycles hit in a season was eight in both the 1993 and 2009 seasons
  • And the most cycles hit in a season was eight in both the 1993 and 2009 seasons. The Miami Marlins are one of the teams that has never hit for the cycle. Mel Ott was the youngest player to hit for the cycle at the age of 20
  • Dave Winfield was the oldest player to hit for the cycle at the age of 39. Catchers are the fielding position with the least amount of cycles hit against them. Hitting for the cycle with a grand slam earns a score of 9
  • The hardest hit to obtain while trying for the cycle earns a score of 3. John Reilly set the record for the shortest period between striking for cycles with two hits one week apart.

Now that you are all aware of what it means to hit for the cycle, we would want to hear your thoughts on the subject. Are you considered to be one of the finest batters on your squad? Do you believe you have what it takes to bat for the cycle in a game of baseball? Have you or any of your colleagues been in a close encounter with one? Let us know what you think in the comments area below! Between now and then, if you have any questions about baseball or softball bats, please don’t hesitate to contact our Bat Experts by phone at 866-321-2287, by email at [email protected], or by clicking here to engage in a live chat session with our bat experts.

And keep in mind that we are always here for you, from Click to Hit!

MLB: 6 Facts About Hitting the Cycle, One of Baseball’s Rarest Feats

In baseball, hitting the cycle is considered to be one of the most spectacular achievements. To complete a cycle, a player must hit a single, a double, a triple, and a home run all in the same game, all at the same time. Against the Colorado Rockies on Tuesday night, Washington Nationals shortstop Trea Turner completed the 328th cycle in Major League Baseball history. Turner was in the midst of his second cycle of his professional life. In addition, Trea Turner’s first cycle, which occurred on April 25, 2017, was against the Rockies, making Turner only the third player in history to hit multiple cycles against the same team.

See also:  What Is A Good Whip In High School Baseball

1. Cycles happen about as often as no-hitters do

Curry Foley of the Buffalo Bisons recorded the first certified cycle in Major League Baseball history against the Cleveland Blues on May 25, 1882, during a game against the Cleveland Blues. When George Bradley of the St. Louis Brown Stockings pitched a perfect game against the Hartford Dark Blues on July 15, 1876, it was the first time a no-hitter had been officially documented. There have been 328 cycles and 301 no-hitters documented in the history of baseball, dating back to the very beginnings of the sport, before the American League was even established.

There have been more cycles than no-hitters throughout history, but the cycle is still the far more unusual feat, as can be seen in this chart.

If neither side manages to record a no-hitter, the game is a draw.

2. 34 Players have hit for the cycle multiple times

Photo by Lindsey Wasson/Getty Images of Adrian Beltre running around the bases after hitting a home run Turner became became the 34th player in history to hit for the cycle more than once in his career with this accomplishment (and the 27 thto do so in the modern era). Reilly, Meusel, Babe Herman, and Adrian Beltre are the only four players in history to hit for the cycle three times in a single season. Beltre hit all three of his home runs at Globe Life Park in Arlington, Texas; once as a guest with the Seattle Mariners and twice as a member of the host team, the Texas Rangers.

3. George Brett went over 11 years in between his two cycles

George Brett, a future Hall of Fame pitcher, recorded his first cycle against the Baltimore Orioles on May 28, 1979, when he was 26 years old. Brett hit for the cycle for the second time in his career on July 25, 1990, against the Toronto Blue Jays, this time as a 37-year-old veteran. The period of 11 years and 58 days between baseball seasons is the longest in the sport’s history.

4. John Reilly and Tip O’Neill only needed a week

On September 12, 1883, John Reilly became the third player in MLB history to complete a cycle. On September 19, 1883, he backed it up with the fourth cycle in Major League Baseball history. Tip O’Neill duplicated this one-week accomplishment in 1887, striking for the cycle on April 30 and then again on May 7, completing the cycle twice.

Aaron Hill has the shortest period between cycles in the modern era, with an 11-day interval between his first and second cycles in 2012, when he recorded his first on June 18 and his second on June 29.

5. Brock Holt has the only postseason cycle in MLB history

Photo by Christopher Evans/Digital First Media/Boston Herald via Getty Images of Brock Holt celebrating hitting for the cycle with a home run | During the postseason’s history, just two no-hitters have been recorded: Don Larsen’s perfect game for the New York Yankees during Game 5 of the World Series in 1956 and Roy Halladay’s no-hitter for the Philadelphia Phillies during Game 1 of the National League Division Series in 2010. It took until October 8, 2018, for the first cycle in the history of the playoffs to take place.

It was the second cycle of Holt’s professional life.

6. Christian Yelich hit two cycles against the same team in one season

The following attributes are allowed: ” src=” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture; picture-in-picture; picture-in-picture;” allowfullscreen=””> Christian Yelich created some cycle history during his 2018MLB NL MVP season, which took place last year. On August 29, Yelich struck for the cycle against the Cincinnati Reds, and then 20 days later, on September 17, he hit for the cycle against the Reds once more, this time against the Reds.

What is a Cycle in Baseball: Mind-Blowing Information for You

Inquiring about a cycle in baseball indicates that you have a strong interest in the sport. In my situation, the first time I witnessed a baseball cycle was during a game between the Boston Red Sox and the Atlanta Braves on May 15, 2015. It was also the first time a cycle was completed in a Major League Baseball playoff game or in the history of the league. I was really taken aback by Brock “The Brock Star” Holts’ 2B-B-HR-3B cycle in the 8th inning of the World Series. There is something invigorating about seeing a hitter hit for many bases, including a home run, in succession.

  • I have, in fact, witnessed something similar to this occur once before.
  • By the end of the game, having witnessed a home run and other near calls, he realized that baseball deserved to be recognized.
  • A player’s ability to hit for the cycle is dependent on more than simply his or her talent.
  • True baseball fans and players will tell you that even attempting to complete a cycle in baseball will require a certain amount of luck because you never know when the process will begin.
  • The single and triple, on the other hand, required more than half of the same game to get.

I inquired of another baseball player if he began his at-bat with the goal of hitting for the cycle in mind. He said yes. He claimed that no one he knew ever went into a game with the goal of hitting a cycle in mind; instead, it just happened.

What is a Cycle in Baseball?

We have reached the crux of our subject matter for this post. Indeed, many people may be perplexed and wonder what this baseball cycle is all about that everyone keeps mentioning. I’ve come to give you the response you’ve been looking for for those who have this reply in mind. A cycle in baseball is defined as when a hitter hits all four types of hits in the same game, in the simplest words possible. Singles, doubles, triples, and home runs are the four sorts of hits that can occur. While attempting to bat for the cycle, a player can take more than four hits in a row.

  1. Every big league baseball player still dreams of getting a Cycle hit.
  2. There have only been 330 or so cycles reported in the period between 1880 and the present day.
  3. Starting with the first pitch or the first at-bat, a player has at least nine innings to hit a single, double, triple, and home run in any specific order to achieve the feat of completing a cycle.
  4. At the end of the day, it’s all about getting all four of those strikes.

No. of Cycles in Baseball History

As I mentioned above, throughout baseball history, there have been only 330 plus cycles recorded. Of those 300 plus cycles, only a handful had the skill and luck to hit multiple cycles. There have been cases of players trying for years in between their cycles. In Major League history, there have been 33 people who got multiple “hits for the cycle.” Therefore don’t be discouraged since even pro players wait forever!

Who made the First Cycle in Major League Baseball History?

In this post, we’re heading into some muddy waters with our subject matter. Many baseball fans and academics have fought over the years about who was the first player to hit a cycle in baseball. The general consensus is that Charles “Curry” Foleymay have been the first player in baseball history to hit a cycle, according to certain accounts. May 25, 1882, marks the 100th anniversary of this historic event. The cycle Curry put together was one of the natural cycles, which means he was able to hit single, double, triple, and home run in that particular order without hitting a single out of the park.

  1. One of the most persuasive arguments against Curry completing the first cycle is that baseball hits and statistics like as cycles are inconsistent.
  2. Many people, however, do not believe this assertion to be accurate for a variety of reasons.
  3. They assert that George Hall of the Athletic Club of Philadelphia hit the first baseball cycle on June 14, 1876, and that this was the first time this had happened.
  4. But at the time, most newspapers reported that Hall had at least two triples, if not three, in a game in which he had at least five hits.
  5. On the contrary, John Thorn, the Official Historian of Major League Baseball, expressed his dissatisfaction with Hall’s alleged cycle of accomplishments.

As a result, this claim is still up for question, therefore I’m going to go with Curry being the first hitter in a cycle. While the first cycle was critical, the final cycle is not nearly as crucial.

Why is a Cycle so Difficult to Do?

Right off the gate, I’d want to inform you that getting even four hits in baseball is quite difficult. However, hitting four separate, more harder shots, such as home runs, is a far more difficult proposition. That is why the possibilities of hitting for the cycle are so difficult, and even in Major League Baseball, they are extremely unusual. I previously claimed that there is a fewer than one percent probability of seeing a cycle in a baseball game, which you will recall is correct. Even more unlikely is the occurrence of several hits for the cycle in the same season as well.

For the most part, hitting a single or a double isn’t all that difficult to do.

Anyone who is unfamiliar with baseball terminology should know that a single is when you get one base and a double is when you get two bases.

TriplesHR in Cycle

Hitting a triple or a home run, on the other hand, is substantially more difficult. In recent years, hitting a home run has grown more difficult than hitting a triple. Since 2015, the proportion of triples has remained less than two percent, and it has not grown in the following seasons. Because of the field layout and the fact that players were all playing the same game, we witnessed more triples than home runs until 1930. According to a study article, the distribution of hits between 1901 and 1929 was such that the triple percentage was twice as high as the proportion of home runs hit during that time period.

The most obvious reason for the low number of triples is that the field has altered.

Triples are extremely rare unless something unexpected occurs.

What do you Need to Hit for the Cycle?

You’ve probably heard me remark before that hitting for the cycle in baseball is difficult. Despite the fact that hitting a cycle is extremely unusual in baseball, it does happen. In addition, I have given several anecdotes from the history of the National League and Major League Baseball, as well as discussed the components of a cycle. The anecdotes and explanations should help you understand why it is so difficult to break out of a pattern. Let’s get to work learning about the equipment that an athlete will require in order to hit a baseball.

This is due to the fact that striking is a physical act.

As a result, that should be our primary objective. Furthermore, we shall divide our attention into two key aspects of an athlete’s physical power and speed: acceleration and deceleration. Both of the above stated attributes play an important influence in a batter’s ability to hit the ball.


In the first place, we’ll discuss and examine the significance of the batter’s power and its use. More precisely, how strength or a balance of power contributes to base-hitting success is discussed. Recently, players have been employing all of the resources at their disposal to build themselves up in a balanced manner. By producing greater power, athletes are able to raise their batting average while also boosting the number of base hits. While most people would tell you that speed is what you need, we believe that you need both speed and power.

See also:  What Does Psa Mean In Baseball Cards


The second factor to consider is the player’s speed. As previously said, many people still believe that speed is the most important factor in baseball. While it is right in some respects, because sprinting through bases is how you score in baseball, it is incorrect in others. However, if you do not go at the appropriate pace, i.e., exit speed, you will not get anywhere. Knowing when and how to run is another important aspect of being fast on the road. Stretching a single into a double or a double into a triple will be particularly important.

For the reasons stated above, learning how to use speed more effectively is more important than simply running faster.

As a result, teaching children how to train for speed and how to improve their speed practice should begin at an early age.

Some Tips for Hitting for the Cycle

As far as advice on how to hit for the cycle goes, there isn’t much to rely on because it is so uncommon. However, there is a wealth of knowledge available on how to hit better and throw longer. Putting that information to use can help you become a better baseball player who is less specialized. Generally speaking, most coaches are looking for hitters that are more evenly matched in terms of speed and power. As a result, the majority of your attention should be focused there. Drills for both hitting and pitching will need to be practiced in equal quantities if you want to become more balanced.

Keeping these pieces of advise in mind, I will now attempt to provide you with some suggestions to the best of my abilities.

What you can do, though, is boost your chances of hitting for the cycle by utilizing all of these strategies.

Paying close attention to your batting and running mechanics will help you enhance your overall baseball numbers.

At the end of the day, all I can give you is a means to improve your baseball battering skills. As well as hitting a cycle or two during your professional life. Nonetheless, here are some suggestions I’ve gleaned from my studies about baseball cycles that I hope will be of assistance to you.

Higher Bat Contact

Increasing a batter’s batting average is a logical and straightforward suggestion, but it is difficult to implement. It appears simple in theory, but it is difficult to put into practice. Many people consider even having a batting average of 0.275 to be a positive accomplishment from the start. As a result, the higher your batting average is, the more hits you will earn. As a result, the greater your chances of hitting home runs and securing doubles will become. Surprisingly, boosting your bat contact % isn’t that difficult to accomplish, especially when you’re a young player.

  1. Learning about proper batting etiquette is something that comes later and is easier to understand than the others.
  2. Increased Bat Contact When it comes to making contact with the ball, there are two things that batters should keep in mind.
  3. If you want to hear the “POP,” you’ll need to strike the ball in the middle of the barrel, for example.
  4. Furthermore, hitting below the middle, as opposed to above the middle, will not provide you with adequate power.
  5. Batters who want to improve their batting average should only hit pitches that they recognize as excellent, and let the rest pass them by.

Greater Exit Speed

After making contact with the ball, your task isn’t over since you still have to swing the bat and propel the ball into the air. When you make firm contact with the ball, you must maximize your hip movement in order to gain that extra swing speed. While making contact with the center of the barrel is important, it is swing speed that allows the ball to fly. Batters will find it simpler and more common to get extra base hits as their swing speed continues to improve. Making singles into doubles, in particular, will be easier to accomplish than ever before, and home runs will no longer be a pipe dream.

Because the cycle must be completed in a specific order, having a faster exit speed is critical.

Have More Discipline

Many athletes believe that having discipline is essential to achieving success as a professional athlete. While having greater speed with your swings is beneficial, it is meaningless if you are unable to strike the ball. When at bat, batters must be able to make their presence felt. Batters must maintain a watchful eye on the pitcher at all times and make sound judgments even when they are not on the field. In terms of height, I have little control, but I can control my strength and speed, and I’m working hard to improve in those areas.

Pitchers will have more time to stress you out with a variety of pitches if you take too many safe swings.

It does not follow, however, that batters should take a swing at anything that comes in their direction. Instead, batters should force the pitcher to fire his or her best fastballs in order to make solid contact with the ball.

More Movement Speed

I don’t want to say anything else that has already been stated a hundred times, so I won’t say it again. However, it will be good to remember that speed is what distinguishes baseball from other sports. Furthermore, some people may have stated that you may extend a single base into a double base and a double base into a triple base by increasing your running or movement pace. At the same time, keep in mind that increasing your running pace will not benefit you if you disregard the other aspects.

More movement speed is desirable.

This is especially true when the bat contact is made at the swing speed necessary to propel the ball.

Keep your focus on the overall picture rather than on one specific detail at any given time.

Enjoy Yourself

This piece of advise may be difficult to accept for individuals who are too firmly entrenched in their beliefs. In order to become a superb baseball player, though, you must be able to enjoy yourself while doing so. A disproportionate number of coaches and parents attempt to make their players excessively competitive or strict in order for them to appreciate the activity. When it comes to your pastime or potential future employment, you should be able to have fun with it and like it. Take it easy and enjoy yourself.

Maintain your cool and work your way through different regions, soaking up as much knowledge as you can.

Some Stats about Cycle in Baseball

  1. Christian Yelich is the first player in MLB history to hit multiple career cycles or “hit for the cycle” on the same team in the same season, and he did so on two different occasions.

Christian Yelich is a professional soccer player.

  1. To complete his many cycles, George Brett had to wait 11 years between each one.

George Brett is an American businessman and philanthropist.

  1. At the first round of the 2018 playoffs, Adrián Beltré hit three cycles in the same stadium, making postseason history.


This is where I get off the hook because I believe I have done my bit. I trust that you have gained a thorough understanding of baseball’s cycle strategy. Everything, from what a cycle is to what you need know about hitting them, has been covered. Final thought: watching a cycle is far more intriguing than watching a grand slam, in my opinion. It is now up to you to take everything you have learned from this essay and apply it to your own attempts to hit a cycle in baseball.

Hit for the cycle (Baseball) – Definition – Lexicon & Encyclopedia

It’s time to start the cycle all over again. Hit for the cycle is the main article. When a single, double, triple, and homerun are all hit by the same player in the same game. The process of accomplishing this achievement in a logical manner is referred to as a “natural cycle.” Hitting for the cycle is an uncommon enough event in Major League Baseball that the league keeps unique statistics on how often this happens. struck for the duration of the cycle It occurs when a specific player hits a single, a double, a triple, and a home run all in the same game.

  1. hitit in a place where there is no grass to grow.
  2. Following his retirement, he worked as an architect in the town of Three Lakes in Wisconsin.
  3. With two extra-inning grand slams, the Philadelphia Phillies are the all-time leaders in the majors.
  4. Yes, but that was slow-pitch softball, not baseball.” Terms that are related.
  5. ~ A single, double, triple, and home run in the same game is considered a triple.

View this page for further information on the meaning of the terms Shot, Tommy John surgery, Headhunter, Tossed, and Grand Slam home run.

How Many Players Have Hit for the Cycle in Baseball?

From the beginning of Major League Baseball history through the end of July 2021, 302 different players have hit for the cycle. The feat was completed by those guys a total of 332 times, with the first being on June 14, 1876, against the Cincinnati Red Stockings, when George Hall of the Philadelphia Athletics accomplished it. In a game against the Washington Nationals on July 16, 2021, Jake Cronenworth of the San Diego Padres became the most recent player to bat for the cycle, becoming the most current player to do so.

What Is the Cycle?

In baseball, “hitting for the cycle” refers to a player who collects a single, double, triple, and home run in the same game, however the hits might occur in any sequence or combination. Another possibility is that a player’s cycle-building hits will be mixed up with other outcomes throughout the game in question.

How Rare Is It?

Hitting for the cycle is a rare commodity when compared to other unique baseball events, but it is not unheard of. For example, there have been 313 no-hittersthrows in Major League Baseball history as of the middle of August 2021. With the frequency of no-increasing no’s rapidly in the new decade, it’s feasible that they’ll surpass the cycle in total numbers within the next few years if the trend continues. Perfect games, on the other hand, have only been recorded in the majors 21 times, making aperfectoabout 15 times less common than either cycles or “simple” no-hitters, according to Baseball Reference.

The list of players who have hit two grand slams in the same game is even more rare than the list of players who have hit unassisted triple plays — only 13 men have accomplished this feat, and Fernando Tatis hit his two salamis in the same inning for the St.

It is also true that, while hitting for the cycle is uncommon, it is not the most uncommon occurrence in baseball.

It will always be a thrilling event, no matter how many players have struck for the cycle at any one time.

These are the coolest cycles ever

All of the cycles are enjoyable. Hitting for the cycle is not only one of baseball’s rarest accomplishments, but it is also one of the most entertaining to witness in real time. The cycle results in a box score that is aesthetically pleasing to the eye. There’s something special about hitting a single, a double, a triple, or a home run, no matter what the situation. However, certain cycles stand out even when compared to other cycles. Here are some of the most amazing bicycles ever built. Shaohei Ohtani of the Angels was born on June 13, 2019.

  • Anyone who knows Ohtani knows that he can hit.
  • Ohtani started his cycle with a 111-mph three-run home ball in the top of the first inning at Tropicana Field, then ripped a double, triple, and finally the single in the seventh inning to complete the feat in front of the home crowd.
  • Brock Holt of the Boston Red Sox on October 8, 2018.
  • There has only been one cycle in the history of the Major League Baseball postseason, and it took more than a century.
  • A home run was required for Holt to complete the feat in the ninth inning of a 14-1 Red Sox victory against the New York Yankees.
  • Holt drove Romine all the way to the right-field porch to complete his second career cycle and became the first player in postseason history to do it.
  • The reason it was cool: He went 6-for-6.
  • It’s fair to say that Yelich’s two cycles in 2018 are some pretty beautiful adornments on his MVP crown.
  • As a result, he became only one of four players in MLB’s Modern Era to record a six-hit cycle (along with Ian Kinsler in 2009, Rondell White in 1995 and Bobby Veach in 1920).
See also:  When Does Major League Baseball Season Start

A few weeks later, Yelich hit for the cycle once more, this time against the Reds, to become one of only three players in the Modern Era to do so multiple times in a season (the others being Aaron Hill in 2012 and Babe Herman in 1931), and the only player to do so twice against the same team in the same season (the other two being Aaron Hill and Babe Herman).

  • It was cool since it was a Father’s Day walk-off.
  • The Rockies were behind by one run in the bottom of the ninth inning at Coors Field, and the winning runners were on base.
  • He was in desperate need of a home run.
  • He was up against New York Giants closer Mark Melancon at the time.
  • What happened at the conclusion of the story?
  • Arenado hit a walk-off home run to left field to seal the victory and complete the cycle.
  • In the words of Rockies radio commentator Jack Corrigan, “It’s a cycle that will go forever!” Bengie Molina of the Rangers was born on July 16, 2010.

Catchers aren’t the same as speedsters.

The Molina Brothers are the last people you’d expect to hit for the cycle, which, as you may recall, needs a triple in order to be completed successfully.

The good news is that you don’t have to picture what a Molina cycle might look like since the stars aligned in reality for one incredible day at Fenway Park.

Eventually, the huge guy chugged into third, becoming one of only a handful of catchers to hit for the cycle in their careers.

Beltré and Drew forged an unique cycle link by accomplishing the accomplishment on the same day, despite being thousands of miles away.

Once previously, on September 17, 1920, a pair of players each hit for the cycle for the Tigers and the Giants, respectively.

In fact, Beltré has hit for the cycle three times in his career, making him one of only three players in the Modern Era to accomplish this feat three times.

Beltré’s second and third cycles happened after he signed with the Rangers, and both took place at the MGM Grand Garden Arena.

Why it was cool: Family cycles were involved.

and Jr.

having the same explosive swing, or, as in this instance with Craig and Cavan Biggio, hitting for the cycle 17 years apart, it’s always exciting to witness.

As a 24-year-old rookie, Cavan – who still has the receipt from his father’s bicycle hanging on the wall of his boyhood bedroom – decided to do it himself.

Along with Gary and Daryle Ward, the Biggios are one of just two father-son duos to bat for the cycle in baseball history.

The reason it was cool: He accomplished this within the first four innings.

A large number of players must wait until their final at-bat to complete a cycle.

Lansing completed the task in four minutes.

Four innings, four hits, one of each hit in each inning, for a total of four hits.

Dave Winfield of the Angels was born on June 24, 1991.

The fact that a Hall of Famer has hit for the cycle isn’t surprising, especially when it’s someone like Winfield, who was one of the finest all-around athletes to ever play the game.

Thirty-nine years and 264 days, to be exact, have passed since my birth.

Cy Williams, who hit for the cycle in 1927 at the age of 39, was the only other 39-year-old to do it, and he was 37 days younger than Winfield at the time.

The reason it was cool: An inside-the-parker with a natural ability No one has hit for a cycle like Culberson’s in the almost 80 years since it occurred – that is, a cycle that includes an inside-the-park home run – and no one will ever hit for a cycle like Culberson’s.

Culberson had already completed a full circuit of the bases by the time the ball was returned to the infield.

In the order in which he got them, he got the single, then the double, then the triple, and finally the home run. That’s more often than you may think; in MLB history, there have only been 14 natural cycles, the most recent of which was Gary Matthews Jr. in 2006.

Players who have hit for the cycle

Even the finest hitters find it difficult to forget getting knocked out four times in a single day. But having a hit of every sort – a single, a double, a triple, and a home run – in the same game is something special. Quite a unique accomplishment. What makes you so unique? It has only happened once before in the history of the postseason, when the Red Sox’s Brock Holt accomplished the feat against the Yankees in the 2018 American League Division Series in Boston, Massachusetts. There have been 0 Marlins players to bat for the cycle, which means the team has won more World Series victories as a whole than it has individuals who have hit for the cycle in their careers.

“It’s difficult to believe,” Matt Kemp remarked after finishing San Diego’s first round of competition.

I’m simply thankful that I’m able to do it.” Listed below is a comprehensive list of every player who has hit for the cycle, organized by franchise: Angels Shohei Ohtani, on the 13th of June, 2019 Watch Mike Trout, on May 21, 2013: Keep an eye on him.

Dave Winfield on the 24th of June, 1991 Watch Posted by Dan Ford on August 10, 1979.

Jim Fregosi’s birthday is July 28th, 1964.

Luke Scott on the 28th of July, 2006.

Submitted by Bob Watson on June 24, 1977 Cesar Cedeno, Aug.

2, 1972 Athletics Mark Ellis, June 4, 2007 Watch Eric Byrnes, June 29, 2003 Watch Miguel Tejada, Sept.

2, 1950 Sam Chapman, May 5, 1939 Doc Cramer, June 10, 1934 Jimmie Foxx, Aug.

6, 1933 Mickey Cochrane, Aug.

25, 1910 Nap Lajoie, July 30, 1901 Harry Davis, July 10, 1901 Harry Stovey, May 15, 1888 Chippy McGarr, Sept.

1886 Henry Larkin, June 16, 1885 Lon Knight, July 30, 1883 Blue Jays Cavan Biggio, Sept.

17, 2001Watch Kelly Gruber, April 16, 1989 WatchBraves Eddie Rosario, Sept.

18, 2021WatchFreddie Freeman, June 15, 2016Watch Mark Kotsay, Aug.14, 2008Watch Albert Hall, Sept.

6, 1910 Johnny Bates, April 26, 1907 Duff Cooley, June 20, 1904 Herman Long, May 9, 1896 Brewers Christian Yelich, Sept.

29, 2018Watch George Kottaras, Sept.

1, 1980 Mike Hegan, Sept.

15, 1991 Watch Willie McGee, June 23, 1984 Watch Lou Brock, May 27, 1975 Joe Torre, June 27, 1973 Ken Boyer, June 16, 1964 Ken Boyer, Sept.

14, 1960 Stan Musial, July 24, 1949 Johnny Mize, July 13, 1940 Joe Medwick, June 29, 1935 Pepper Martin, May 5, 1933 Chick Hafey, Aug.

16, 1895 Tip O’Neill, May 7, 1887 Tip O’Neill, April 30,1887 Cubs Mark Grace, May 9, 1993 Watch Andre Dawson, April 29, 1987 Ivan De Jesus, April 22, 1980 Randy Hundley, Aug.

30, 1933 Hack Wilson, June 23, 1930 Jimmy Ryan, July 1,1891 Jimmy Ryan, July 28,1888D-backs Aaron Hill, June 29, 2012Watch Aaron Hill, June 18, 2012Watch Kelly Johnson, July 23, 2010Watch Stephen Drew, Sept.

18, 2002 Watch Luis Gonzalez, July 5, 2000WatchDodgers Cody Bellinger, July 15, 2017 Full story, Watch Orlando Hudson, April 13, 2009 Watch Wes Parker, May 7, 1970 Gil Hodges, June 25, 1949 Jackie Robinson, Aug.

2, 1944 Babe Herman, July 24, 1931 Babe Herman, May 18, 1931 Jimmy Johnston, May 25, 1922 Tom Burns, Aug.

15, 2011Watch Fred Lewis, May 13, 2007 Watch Randy Winn, Aug.

17, 1920 Chief Meyers, June 10, 1912 Sam Mertes, Oct.

25, 1888 Dave Orr, Aug.

14, 2003Watch Andre Thornton, April 22, 1978 Tony Horton, July 2, 1970 Larry Doby, June 4, 1952 Odell Hale, July 12, 1938 Earl Averill, Aug.

24, 1903 Mariners Adrian Beltre, Sept.

11, 1997 WatchAlex Ochoa, July 3, 1996 WatchKevin McReynolds, Aug.1, 1989 Watch Keith Hernandez, July 4, 1985 Mike Phillips, June 25, 1976 Tommie Agee, July 6, 1970 Jim Hickman, Aug.

28, 2008WatchBrad Wilkerson, April 6, 2005 WatchVladimir Guerrero, Sept.

16, 1987 Watch Chris Speier, July 20, 1978 Tim Foli, April 21, 1976 Orioles Jonathan Villar, Aug.

14, 2009WatchAubrey Huff, June 29, 2007 WatchCal Ripken Jr., May 6, 1984 Brooks Robinson, May 15, 1960 George McQuinn, July 19, 1941 Ski Melillo, May 23, 1929 Baby Doll Jacobson, April 17, 1924 George Sisler, Aug.

8, 1920 Phillies David Bell, June 28, 2004 WatchGregg Jefferies, Aug.

5, 1927 Sam Thompson, Aug.

28, 2016Watch Daryle Ward, May 26, 2004 Watch Jason Kendall, May 19, 2000 Watch Gary Redus, Aug.

4, 1945 Bob Elliott, July 15, 1945 Arky Vaughan, July 19, 1939 Arky Vaughan, June 24, 1933 Max Carey, June 20, 1925 Kiki Cuyler, June 4, 1925 Pie Traynor, July 7, 1923 Dave Robertson, Aug.

22, 1912 Chief Wilson, July 3, 1910 Fred Clarke, May 7, 1903 Fred Clarke, July 23, 1901Fred Carroll, May 2, 1887 Rangers Carlos Gomez, April 29, 2017Full story, Watch Adrian Beltre, Aug.

23, 2013WatchAdrian Beltre, Aug.

13, 2006 Watch Mark Teixeira, Aug.

8, 2018 (Game 3 of ALDS)Full story, Watch Mookie Betts, Aug.

14, 1988 Rich Gedman, Sept.

15, 1979 Carl Yastrzemski, May 14, 1965 Lou Clinton, July 13, 1962 Bobby Doerr, May 13, 1947 Ted Williams, July 21, 1946 Bob Johnson, July 6, 1944 Bobby Doerr, May 17, 1944 Leon Culberson, July 3, 1943 Joe Cronin, Aug.

19, 1934 Roy Carlyle, July 21, 1925 Tris Speaker, June 9, 1912 Patsy Dougherty, July 29, 1903 Buck Freeman, June 21, 1903 Reds Eric Davis, June 2, 1989 Watch Frank Robinson, May 2, 1959 Harry Craft, June 8, 1940 Heinie Groh, July 5, 1915 Mike Mitchell, Aug.

28, 1894 John Reilly, Aug.

26, 1887 John Reilly, Sept.

12, 1883 Rockies Charlie Blackmon, Sept.

17, 2014 Watch Carlos Gonzalez, July 31, 2010 Watch Troy Tulowitzki, Aug.

3, 1982 Frank White, Sept.

5, 1977 Freddie Patek, July 9, 1971 Tigers Carlos Guillen, Aug.

7, 1950 George Kell, June 2, 1950 Vic Wertz, Sept, 14, 1947 Charlie Gehringer, May 27, 1939 Gee Walker, April 20, 1937 Bob Fothergill, Sept.

17, 1920Twins Jorge Polanco, April 5, 2019 Watch Michael Cuddyer, May 22, 2009Watch Jason Kubel, April 17, 2009 Watch Carlos Gomez, May 7, 2008Watch Kirby Puckett, Aug.

18, 1980Mike Cubbage, July 27, 1978 Lyman Bostock, July 24, 1976 Larry Hisle, June 4, 1976 Cesar Tovar, Sept.

2, 1929 Goose Goslin, Aug.

2, 1908 White Sox Jose Abreu, Sept.

24, 1977 Ray Schalk, June 27, 1922 Yankees Melky Cabrera, Aug.

3, 1995 Watch Bobby Murcer was born on August 29, 1972.

Joe DiMaggio was born on May 20, 1948.

Buddy Rosar was born on July 19, 1940.

Joe DiMaggio was born on July 9, 1937. Lou Gehrig was born on June 25, 1934. Tony Lazzeri was born on June 3, 1932. Bob Meusel was born on July 26, 1928. Bob Meusel was born on July 3, 1922. Bob Meusel was born on May 7, 1921. Bert Daniels was born on July 25, 1912.

Leave a Reply

Your email address will not be published.