What Does Put Out Mean In Baseball

Putout – Wikipedia

According to Wikipedia, the free encyclopedia. Navigate to the next page Jump to the search results At first base, there was an unsuccessful putout attempt. aputout (sometimes known as a foul out when applicable) is a type of out in baseball statistics that is awarded to a defensive player who records anout by one of the following techniques while in secure control of the ball:

  • At-bats in which the ball is used to tag a runner who is not touching a base are known as “tagouts.” It is possible to put out batters or runners in baseball by catching and tagging them at the base of the infield flyout (aforce out, or if done after a flyout, adoubling off)
  • Appeal play involves catching a thrown ball and tagging a base in order to record an out. Being struck out after taking a third swing
  • A flyout is the act of catching a hit ball on the fly. Being in the most advantageous position in relation to a runner who has been flagged for interfering

All-time records

  1. Jake Beckley has 23,709 points
  2. Cap Anson has 21,695 points
  3. Ed Konetchy has 21,361 points
  4. Eddie Murray has 21,255 points
  5. Charlie Grimm has 20,711 points
  6. Stuffy McInnis has 19,962 points
  7. Mickey Vernon has 19,808 points
  8. Jake Daubert has 19,634 points
  9. Lou Gehrig has 19,510 points
  10. Joe Kuhel has 19,386 points.

Single season records

  1. Dave Foutz was born in 1886
  2. Tony Mullane was born in 1882
  3. George Bradley was born in 1876
  4. Guy Hecker was born in 1884
  5. Mike Boddicker was born in 1984
  6. Larry Corcoran was born in 1884
  7. Al Spalding was born in 1876
  8. Ted Breitenstein was born in 1895
  9. Jim Devlin was born in 1876
  10. Dave Foutz was born in 1887
  11. Bill Hutchinson was born in 1890
  12. Mike Boddicker was


  1. Yadier Molina has a 1,135-game hitting streak (with the Houston Astros in 1969)
  2. Yadier Molina has a 1,113-game hitting streak (with the St. Louis Cardinals in 2016)
  3. Russell Martin has a 1,065-game hitting streak with the Los Angeles Dodgers in 2007
  4. Mike Piazza has a 1,045-game hitting streak with the Los Angeles Dodgers in 1997
  5. Michael Barrett has a 1,035-game hitting streak with the Chicago Cubs in

First basemen

  1. Jiggs Donahue had 1,846 hits in 1907
  2. George Kelly had 1,759 in 1920
  3. Phil Todt had 1,755 in 1926
  4. Wally Pipp had 1,710 in 1926
  5. Jiggs Donahue had 1,697 in 1906
  6. Candy LaChance had 1,691 in 1904
  7. Tom Jones had 1,687 in 1907
  8. Ernie Banks had 1,682 in 1965
  9. Wally Pipp had 1,667 in 1922
  10. Lou Gehrig had 1,

Second basemen

  1. Bid McPhee had 529 points in 1886
  2. Bobby Grich had 484 points in 1974
  3. Bucky Harris had 483 points in 1922
  4. Nellie Fox had 478 points in 1956
  5. Lou Bierbauer had 472 points in 1889
  6. Billy Herman had 466 points in 1933
  7. Bill Wambsganss had 463 points in 24
  8. Cub Stricker had 461 points in 1887
  9. Buddy Myer had 460 points in 1935
  10. Bill Sweeney had 459

Third basemen

  1. Denny Lyons had 255 hits for the Philadelphia Athletics in 1887
  2. Jimmy Williams had 251 hits for the Pittsburgh Pirates in 1899
  3. Jimmy Collins had 243 hits for the Boston Beaneaters in 1900
  4. Willie Kamm had 236 hits for the Chicago White Sox in 1927
  5. Frank Baker had 233 hits for the Philadelphia Athletics in 1913
  6. Bill Coughlin had 232 hits for the Washington Senators in 1901
  7. Ernie Courtney had 229 hits for the St. Louis Browns


  1. 401 (Philadelphia Phillies, 1898)
  2. 404 (Philadelphia Phillies, 1906)
  3. 395 (Chicago White Sox, 1913)
  4. 392 (Chicago White Sox, 1914)
  5. Donie Bush: 425 (Detroit Tigers, 1914)
  6. Hughie Jennings: 425 (Baltimore Orioles, 1895)
  7. Joe Cassidy: 407 (Boston Braves, 1914)
  8. Rabbit Maranville: 407

Left fielders

  1. Joe Vosmik had 432 hits for the Cleveland Indians in 1932
  2. Rickey Henderson had 407 hits for the Oakland Athletics in 1980
  3. Elmer Valo had 395 hits for the Philadelphia Athletics in 1949
  4. Ralph Kiner had 390 hits for the Pittsburgh Pirates in 1947
  5. Bobby Veach had 384 hits for the Detroit Tigers in 1921
  6. Ben Oglivie had 384 hits for the Milwaukee Brewers in 1980
  7. Ralph Kiner had 382 hits for the Pittsburgh Pirates in 1948
  8. Ralph

Center fielders

  1. Taylor Douthit had 547 points in 1928
  2. Richie Ashburn had 538 points in 1951
  3. Richie Ashburn had 514 points in 1949
  4. Chet Lemon had 512 points in 1977
  5. Dwayne Murphy had 507 points in 1980
  6. Dom DiMaggio had 503 points in 1948
  7. Richie Ashburn had 503 points in 1956
  8. Richie Ashburn had 502 points in 1957
  9. Richie Ashburn had 496 points in 1953
  10. Richie Ashburn had 495 points

Right fielders

  1. Babe Ruth had 392 hits in 1932
  2. Al Kaline had 387 in 1961
  3. Dave Parker had 381 in 1977
  4. Ichiro Suzuki had 381 in 2005
  5. Ichiro Suzuki had 379 in 2004
  6. Austin Kearns had 374 in 2007
  7. Hunter Pence had 374 in 2013.

See also

The meaning of baseball abbreviations and terminology is vital to grasp if you want to become a better player. One often asked question we get is: What is the role of the ‘putout’ or PO in baseball? We’ll make an attempt to address this question by providing you with a concise description and an explanation of its purpose. We’ll also go over another baseball phrase that’s connected, and we’ll finish with some more questions to help you expand your knowledge and become a more well-versed baseball player yourself.

Put Out (PO)

Putting it another way, a putout is when a fielder is given credit for getting the hitter or runner on the other team out of the game. There are several methods by which players can obtain this credit. and some of the most prevalent methods are as follows: Attempting to strike out the third batter A base is being targeted for a forceout. Tagging a runner in preparation for a tagout A base is being tagged on an appeal play. Being in close proximity to a runner while there is interference Check This Incredible Video: Rare 9-3 Putout Compilation” is a compilation of rare 9-3 putouts.

“Wisecrack Edition” > “Wisecrack Edition” We’ll go through each of these reasons in greater depth later on.

Catching a Flyout

A flyball occurs when a hitter lobs or smashes the ball in such a way that it flies into the air. If any of the defensive players manage to grab the ball before it touches the ground, the batter will be dismissed, and this will be referred to as a flyout. The foul area is not the only place where flyouts can occur. The putout is awarded to the player who successfully catches the flyball in the air.

Pitching The Third Strikeout

A strikeout occurs when a batter fails to strike out on the final pitch of the inning. This is a putout that is given to pitchers since they are the ones who threw the ball that went over the batter’s bat and into the stands.

Tagging a Base for a Forceout

A force out occurs when a hit or ground ball is collected by a fielder and then tagged at the base of the batter’s plate. The putout is awarded to the fielder who tagged the base in the first place.

Tagging a Runner for a Tagout

This is extremely similar to a forceout, with the distinction being that instead of tagging the base, the fielder tags the runner to indicate the out in this situation. When a tagout is performed, the fielder who performed it is credited with the putout.

Tagging a Base On An Appeal Play

It is called an appeal play when the defensive side draws the umpire’s attention to an arule infringement on the field.

An appeal play in which the tagger successfully catches the ball and tags the base results in a putout that is awarded to the tagger.

Being Close to a Runner During Interference

When the batting team is penalized by the umpire for interfering with or impeding any fielder or the flow of play, this is referred to as interference. A fielder who is in close proximity to a base runner who has been suspected of interfering with the play is also given credit. Take a look at this video to learn more about the Runner Lane Interference Rule: “frameborder=”0” fullscreen is permitted if the following attributes are met: accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture “The Dark Knight Rises: What Went Wrong?” is the title of the article.

Put Out vs Assist

Another point that may be unclear to some is the difference between a putout and an assist, which is described below. This distinction is rather simple to comprehend. An assist is a play made by a player in order to aid other position players in reaching a putout. For instance, when a fielder sends a pitch to another player who tags a base in order to get the runner out, this is an example of a tag. The fielder who threw the ball will be credited with the assist in this situation. The fielder receives an assist as long as he or she makes contact with the ball, even if it is inadvertent.


Yes, it does, but only under specific circumstances. ” PO is most commonly used in major league baseball and the majority of professional leagues to refer to a putout. However, at the high school or college league level, college coaches might refer to a player who specializes in pitching as a ‘pitcher only,’ which means that he or she exclusively pitches.

What is a PO in High School Baseball?

As previously stated, high school and college coaches refer to a specialized player who understands how to pitch well as a ‘pitcher only’ when referring to that player’s abilities. The legitimacy of this technique is debatable, depending on who you speak with. A player’s ability to work on all parts of the game, according to some, will help them improve their grasp of the game and raise their chances of making it to the major leagues in the future. Others believe that concentrating on a single facet of the game and being really proficient with a ball or a bat is all that is required to become genuinely remarkable and will have the most influence on your long-term success.

What Does SO Mean in Baseball?

Some people may confuse SO with PO because they seem like comparable baseball statistics, but SO really refers to a’strikeout,’ which is what it is. As we’ve previously discussed in this article, strikeouts and their applications are a type of put out that is granted to the pitcher for recording his third strike when a hitter hits the ball with his bat. “Major League Baseball’s Top Strikeout Pitchers:” frameborder=”0″ The following attributes are permitted: acceleration sensor, automatic playback, encrypted-media, gyroscope, picture-in-picture, and picture-in-picture.

allowfullscreen “The Dark Knight Rises: What Went Wrong?” is the title of the article. “Wisecrack Edition” > “Wisecrack Edition”


We hope that this article has answered some of your questions regarding PO, its definition, and how it is used in the sport of baseball. Make sure to browse the rest of our website for further information on a variety of baseball-related topics. We have materials to help you improve your knowledge and attain your full potential as a ballplayer, regardless of whether you are an experienced player or a complete novice. This page was last updated on

What Is A Putout In Baseball? Definition & Meaning On SportsLingo

1. When a defensive player records an out for his team, this is the word that is used to describe the situation. There are a variety of options for getting out, including:

  • Catching a fly ball, whether it is in foul or neutral zone
  • Getting a third strike to complete a strikeout
  • Caught-and-tagged a hit or thrown ball, resulting in a force out at the base The act of hitting a baserunner with the ball when they are not touching a base When you catch the ball and tag a base on an appeal play to get an out, you are considered successful. In order to be considered for interference, a fielder must be situated near enough to the baserunner.

Is A Strikeout A Putout For A Catcher?

Yes. That is true that when the third strike is caught, when the bunt is fouled on the second strike, or when the catcher drops a third strike but first base is not yet occupied, the catchers receives credit for the putout when the batter strikes out, but it is not always the case.

Examples Of How Putout Is Used In Commentary

In shallow center field, Griffey gets beneath the errant fly ball and puts it out with relative ease. 2nd inning: Williams neatly catches the ball at third base and throws it to second for the force putout.

Sports The Term Is Used

1.Baseball Softball is the second sport.

Abbreviated As

1. PO (point of sale) (Visited 565 times, 1 visits today)

Putouts and Assists

(Photo courtesy of Associated Press/The Canadian Press, Chris Young) A putout (PO) is awarded to a fielder who successfully knocks out an offensive player in accordance with scoring rule10.09. According to scoring rule 10.10, fielders who make a significant contribution to an offensive player being forced out are given an assist (A).


A putout is awarded to a fielder who successfully throws out a hitter or runner. Typical occurrences of this include catching a fly ball, tagging a base that a runner is forced to, and tagging a runner off of a base, among other situations. In addition, a catcher receives credit for a putout when a batter strikes out. (*) In addition, there are a number of situations in which automatic outs are triggered. The following accomplishments are all attributed to the catcher:

  • Bunting foul for a third strike
  • An improperly hit ball (e.g., using an illegal bat or stepping out of the batter’s box)
  • A batter who has been touched by a batted ball
  • Interfering with the catcher
  • Batting out of turn
  • And other violations.
See also:  How Big Is A Baseball Diamond

The following automatic outs are awarded to the proper fielder in the order shown below:

  • The fielder who should have made the catch
  • The runner out after being hit by a batted ball
  • The runner out after running out of base line to avoid a tag
  • The runner out after passing another runner
  • And the runner out after being interfered with by another runner
  • The fielder who should have made the catch.
  • Note: If a fielder was throwing the ball, the assist should be given to the fielder and the putout should be given to the person to whom the ball was being thrown.
  • If the batter is out due to runner interference (i.e., an automatic double play), the first baseman should be given the putout.

If we simplify everything, the fielder who was closest to the runner or the ball receives credit for making the catch is the one who gets the out. (*) Give the putout to the catcher as long as he catches it, or if the hitter is automatically out, whichever is greater. If the ball is dropped and the ball is tossed to first base, the catcher receives an assist and the first baseman (or whomever makes the out) receives a putout for their efforts.


Each fielder who made a contribution to getting a batter or runner out should be given an assist. The term “putout” refers to when a fielder throws the ball to another fielder, who then receives credit for the putout as mentioned above. Please take note of the following particular issues and exceptions:

  • Although no outs are recorded as a result of a mistake (for example, a shortstop throws to the first baseman in plenty of time and he drops the ball), a fielder receives an assist. The shortstop receives an assist, the first baseman receives an error, and the batter receives no hit
  • Credit an assist if the ball is deflected off a fielder and there is a later putout. Example: A line drive glances off the pitcher and is caught by the third baseman, who tosses it to first for an out. The following rules apply: a fielder who throws the ball more than once in a run-down play can only be given one assist
  • Pitchers do not receive assists on strikeouts or caught stealings
  • No assist is recorded for a fielder who throws a wild throw and a runner who attempts to advance is put out
  • And no assist is recorded for a fielder who throws the ball multiple times in an infield play can only be given one assist. (For example, a catcher may toss the ball towards centerfield in an effort to rob a runner who is on his way to second base.) It is not considered an assist when the runner makes a successful attempt to advance to third base and is thrown out by the outfielder.

What Is a Putout in Baseball? It’s a Pretty Common…

Baseball is sometimes referred to as “the sport of failure.” This is not entirely incorrect. Even Ted Williams, one of the best players in history, has stated that baseball may be the only pursuit in which someone may be successful three out of ten times and still be considered successful, according to him. Was there a difference the other seven times? The batter, on the other hand, is the victim of a putout. So, what exactly is a putout? It is known as a “putout” when a defensive player immediately records an out against either a batter or a baserunner.

Ground balls provide the most putouts for first basemen, and strikeouts provide the most putouts for catchers, who rank second.

To look at it at face value, the notion of a putout appears to be quite basic and easy, and for the most part, this is correct. However, there is more to putouts than that, which we will explore in greater depth in the remainder of this essay.

Recording a Putout in Baseball

In baseball, there are a variety of different ways to record a ground ball out. The same goal is accomplished by either of them: recording an out against either a batter or an outfielder. A putout can be recorded by touching a base before the batter or runner on a force play, tagging a runner out, fielding a fly ball, or catching a third strike in the field of play in baseball. A putout may also be given to a fielder if he is the closest defense at the time of the call for interference. With that in mind, we’ll go through the specifics of what each scenario includes in greater depth.

  1. Given the fact that practically every force out situation involves an infield ground ball, this is one of the more typical possibilities.
  2. For example, if a hitter hits a ground ball to shortstop and the fielder throws to first to retire the batter, it is the first baseman who is awarded the putout, not the shortstop who was originally awarded the putout.
  3. On the vast majority of ground ball outs, the person who records the putout is not the same person who fielded the initial hit ball.
  4. The second scenario includes the use of a tag game.
  5. It is in this circumstance that any fielder who successfully tags out the runner is awarded a putout.
  6. Frequently, this is a situation in which the person who records the putout is not the same player who fielded the first hit ball.
  7. Runners can be tagged out on a pickoff attempt or caught stealing, resulting in a putout for the player who made the tag on the retiring baserunner.

The following scenario includes the use of fly balls.

This is a relatively clear case, and the same can be said for our following situation.

The majority of strikeouts are straightforward in the sense that the last strike is caught by the catcher (or the batter is tagged out on a swinging strike in the dirt) and that is the end of the game.

The dropped third strike was the subject of several exceptions.

It is common for catchers to receive balls and toss them on to first base, in which case the first baseman will earn the putout if they are unable to execute a tag successfully.

If there is no out recorded on the play, then there can be no putout recorded.

As a result, the end result is the most uncommon, which is aninterference call.

In baseball, offensive interference occurs when a hitter or runner interferes with a fielder’s ability to make a play.

Any circumstance in which a hit ball strikes a baserunner is covered by the nearest defender, who is assigned the task of recording a putout for the baserunner.

The batter is called out and the player who was attempting to catch the ball is given the assignment of a putout if an umpire determines that a spectator intervened in the field of play and prevented a ball in flight from being caught by a player.

Putouts and Assists in Baseball

For each out that is recorded on the field, a putout is afterwards recorded by the fielder who made the play, as we have demonstrated. While this is true, as we previously stated, there are several instances, particularly on ground balls, where assists are given to fielders in addition to batters. Putouts and assists are connected because many putouts require the assistance of another player. It should be noted, however, that a putout must be completed in order for a player to obtain an assist, although an assist is not necessary in order for a putout to be completed.

  • Furthermore, even if only one out is recorded on a play, numerous assists can be recorded on the same play.
  • Double (or triple) plays are the most common instances of this sort of event.
  • It is most frequently encountered in a typical ground ball double play.
  • In this instance, the second baseman (4) not only records the out at second, but he also throws to first (3) to get the out there, earning him both a putout and an assist on the play.
  • With regard to unassisted double plays (or the extremely uncommon unassisted triple play), if one fielder records both outs, the player who records both outs is credited two putouts, with no assists being assigned to any other fielder.
  • Consider the following scenario: A left fielder fields a single, throws to shortstop, who delivers the ball to the catcher for an out at the plate.
  • According to the current regulation, whenever a putout is recorded, each fielder who touches the ball, whether intentionally or unintentionally, before the out is recorded earns one assist.

MLB Putout Leaders

Putouts are more often at first base than at any other position on the field, owing to the nature of the situations in which they occur. The result is that players who spent more than half of their career games at first base occupy each of the top 49 slots on the career putouts leaderboard, as well as 94 of the top 100 spots on the lifetime putouts leaderboard (and most played their entire careers there). Jake Beckley, a Hall of Fame first baseman who played from 1888 to 1907, holds the Major League Baseball record for putouts in a lifetime with 23,767 total putouts in his career.

  • The fact that there were fewer strikeouts in the early days of baseball allowed for more balls to be put in play, resulting in greater putout totals in the field, mostly in the infield and notably at first base, than they are now.
  • However, Brooks Robinson, who retired from the game in 1977, is the all-time leader in third baseman’s innings played.
  • Catcher, on the other hand, is the most eye-catching name on the list.
  • Roberto Perez of the Cleveland Indians was the American League’s top putout producer in 2019, becoming the first player in MLB history to accomplish so from a position other than first base.

According to Baseball-Reference, the following are the all-time and single-season leaders in putouts for each position in baseball:

Position Career Single Season
Pitcher Greg Maddux (546) Dave Foutz (57)
Catcher Ivan Rodriguez (14,864) Yasmani Grandal (1,169)
First Base Jake Beckley (23,755) Jiggs Donahue (1,846)
Second Base Bid McPhee (6,522) Bid McPhee (529)
Shortstop Rabbit Maranville (5,139) Hughie JenningsDonie Bush (425)
Third Base Brooks Robinson (2,697) Denny Lyons (255)
Left Field Barry Bonds (5,226) Joe Vosmik (424)
Center Field Willie Mays (7,022) Taylor Douthit (543)
Right Field Paul Waner (4,559) Dave ParkerIchiro Suzuki (381)

Related Articles

  • Baseball Positions: What each player’s responsibilities are on the field
  • What Is the Average Number of Players on a Baseball Team? (MLB, NCAA, and Youth) What Is the Infield Fly Rule, and Are Baseball Contracts Guaranteed? Are Baseball Contracts Guaranteed? Taking a Financial Look at.
  • What Are Baseball Signs and Symbols? SignsExplained: What is Sign Stealing?

What is a Putout in Baseball – What Position Records the Most?

A strikeout is something you’ve probably heard about. You’ve probably heard of the term “shutout.” However, in baseball, there is another phrase that can occasionally cause misunderstanding: the putout. Put simply, a putout is what occurs when a fielder completes an out by himself or herself. In most cases, this occurs in one of the following four ways:

  • In baseball, this is referred to as “forcing out” the runner by stepping on the base before the runner arrives. tagging a runner who is already running
  • A ball that was sent their direction was caught
  • Catchers receive a technical strike for catching the third strike.

The statistics of Major League Baseball might be befuddling. A putout and a force out are two terms that can occasionally be used interchangeably, and they can also sound similar without actually being the same thing. Let’s define the putout and explain how it differs from other commonly used words in the industry.

What is the Difference Between a Putout and an Assist?

Putting it simply, a putout is a form of assist in the same way that a fielder can assist an MLB pitcher by taking care of the play themself. An assist, on the other hand, has a very specific definition. Start by specifying the phrases that will be used.

  • In accordance with the Major League Baseball terminology, an assist occurs when a fielder touches the ball before another fielder completes the play. It is technically possible for a fielder to record an assist even when this type of contact was not intended by the player. For example, if one fielder takes a ground ball and throws it to another, who records the out, it is considered an assist. It’s possible that two assists are made at the same time, like in a double play.
  • Putout: As previously stated, a putout occurs when the fielder is the first to make contact with the ball and completes the play by himself or herself. For an assist, a fielder does not earn any credit.

Let’s look at an example to illustrate the distinction. If the batter hits a ground ball towards second base, it is possible that the second baseman will be the first fielder to reach it. The second baseman will not be able to make the play at first, but he will be able to toss the ball to the first baseman. In that situation, the first baseman is the one who makes the putout (by catching the ball and tagging the base). The second baseman is the one who enters the assist into the system. Whatever the starting point of the play may be, such as if the ball is delivered to the shortstop, who then throws the ball to the second baseman who is covering the base, the same rule applies.

See also:  How Many Innings Is Baseball

Is a Strikeout a Putout?

In a technical sense, absolutely. Putouts are recorded by catching pitches that result in strikeouts, while first basemen record putouts by catching throws on ground-ball outs, according to the Major League Baseball dictionary. Catchers and first basemen are often the players with the greatest putout totals. In other words, the two players who are consistently on the receiving end of the most outs are also the ones who accumulate the highest putout totals. As a result, putouts as a defensive statistic are not usually given much attention by the general public.

What Positions Get the Most Putouts in Baseball?

Jake Beckley holds the record for the most putouts in Major League Baseball history. During the turn of the century, Jake Beckley was a first baseman who played baseball for the New York Yankees. His numbers, which include over 23,000 putouts, assist to highlight exactly how many putouts first basemen are prone to getting. Because catchers are theoretically responsible for a putout when they catch the third strike, they are also more likely to accumulate these figures than pitchers. After all, catchers are involved in the game from start to finish, whereas pitchers will alternate.

If, on the other hand, a team fails to convert a large number of strikeouts, a large number of putouts are awarded to the first baseman. Putting out grounders and flyouts is another way in which a first baseman can receive putouts.

Learning Some Unique Putout Situations

Despite the fact that a strikeout technically results in a putout for the catcher, most people associate putouts with a ball in play. With that in mind, let’s take a look at some of the more unusual putout situations that may occur throughout the whole Major League Baseball landscape:

  • Batted ball: Technically speaking, in Major League Baseball, a batted ball occurs each time a bat makes contact with the ball. In other words, a hit ball might be a home run—or it can be a fly out to center field—depending on the circumstances. It’s possible that it’s a foul ball. As long as the ball makes contact with the bat, a batted ball statistic is calculated. Once the bat makes contact with the ball, the issue becomes who will be the one to get the putout. Is it going to the third baseman this time? In that instance, it is likely that the third baseman will receive an assist since he will have to toss the ball to the first baseman, who will be the one who makes the putout.
  • What happens if a hitter knocks a fly ball to the centerfielder, who then raises his glove and slams the ball into the ground for an easy out? Without any assistance from anybody else on the defense, it is up to the center fielder to make the putout in this situation.
  • Ground out: This is the same concept as a flyout. Typically, though, when there is a ground out, it is beneficial to the shortstop or third baseman, whichever is responsible for picking up the ball and throwing it to the appropriate base.
  • Consider the following scenario: someone from the Chicago Cubs hits a ball to short left field, and someone from the Seattle Mariners snatches it up, but not in time to tag out the batter. Instead of tossing the ball to a base, the Mariners player may be required to tag out instead. Because of this putout, the person who is tagged receives a putout as well
  • Pop-up: A “pop-up” is just another word for a flyout, which occurs when the ball flies practically straight up into the air after being hit by the pitcher. Anyone who catches it has the option of recording the putout for their own records. Additionally, it explains why there are so many catchers that have a high number of putouts in a single season.
  • Triple play: Because every out is referred to as a “putout,” it is possible to have as many as three putouts in a single play, as well as several types of assists. In the case of the Los Angeles Dodgers, a putout occurs when a ball is hit toward third base and the baseman gets a man out
  • The third baseman can then throw the ball to second base for another putout, and so on.


A putout is always a possibility on any given play, regardless of whether you’re an outfielder, an infielder, or any other defensive player. However, if you’re on the offensive, you’re constantly on the lookout for a putout, whether it’s avoiding being caught stealing or becoming a baserunner between two opposing defenses. In baseball, a putout occurs after every out, which results in a total of twenty-seven outs throughout the season. The only issue is, when and where will it take place. Finally, if putouts are used as a scoring statistic in fantasy baseball, fantasy baseball owners should be aware of this.

Including a guy that receives putouts in your fantasy baseball lineup will help you win your league!

Similar Posts

What is the Infield Fly Rule, and how does it work? What is the Batter’s Eye, and how does it work? What Do Bat Boys Get Paid? How Much Money Do Bat Boys Make? What is the definition of a hold in baseball? In baseball, what exactly is a quality start? In baseball, there is a magic number. What is TOOTBLAN Baseball, and how does it work? What is the Rule 5 Draft, and why is it important? Baseball with a Can of Corn In baseball, what is the term “caught stealing”? Baseball with a Double Switch What is the role of a bench coach in baseball?

In baseball, there will be a doubleheader.

Baseball is a hit-and-run sport.

What is a Spitball Pitch, and how does it work?

Putout – BR Bullpen

An out is recorded by a fielder each time he performs an action that results in the batter or the baserunner being out of play. These are the activities that will be taken:

  1. Grabbing a fly ball, line drive, or third strike before they hit the ground is important. The act of touching a base while in control of the ball in order to record a force out, an appeal play, or to retire the hitter at first base
  2. Intentional contact with the ball, or with a hand or glove holding the ball, during a run when the runner is not safely touching a base

Putouts are an important element of the baseball accounting process. The official scorer can “prove” a box score by demonstrating that a team’s plate appearancesis equal to the total of the team’s runs, runners left on base, and the opposing team’s putouts. As a result, it is critical to record a putout for every player who is retired, even if the fielder did nothing to indicate that the out had been recorded. Whenever this occurs, the following credit is provided to the appropriate party:

  • If the batter commits an automatic out due to batting illegally, bunting foul for a third strike (unless the foul ball is caught on the fly), striking out with first base occupied and fewer than two outs (even if the catcher fails to catch the ball), being touched by his own batted ball, batting out of order, or refusing to advance to first on a walk, the catcher is awarded a putout. Additionally, if a runner fails to advance from third base with an apparent winning run, the putout is awarded to the catcher. If a hitter is out due to an uncaughtinfield fly, a putout is awarded to the fielder who had the best chance of catching the fly ball. If a runner is stopped because he or she has been touched by a hit ball, the nearest fielder is awarded a putout. The fielder who escaped the tag that the runner avoided gets credited with a putout if the runner is thrown out because he ran out of the baseline to avoid being tagged. If a runner is out due to passing another runner, the putout is awarded to the fielder who is closest to the out. If a hitter or a runner is called out for interfering with the game, the fielder who interfered with him is given credit for a putout. It is not necessary for the fielder to make a putout if he or she is already throwing the ball
  • The putout will be awarded to whoever it was that the fielder was throwing to, and the fielder will be credited with an assist. If a hitter is out due to interference by a baserunner who came before him, the first baseman is credited with a putout. If a runner is out because he attempted to run the bases in reverse order, the assist is given to the fielder who was covering the base where he began.

External Sites

Prof. Darron Lockman, MD, posed the question. Score: 4.7 out of 5 (49 votes) When a runner is out due to being touched by a hit ball, the putout is awarded to the fielder who is closest to the runner. The fielder who made the tag that the runner eluded is credited with a putout if the runner is thrown out for sprinting out of the baseline to avoid being tagged.

Whats the difference between a put out and an assist?

A putout (PO) is awarded to a fielder who successfully throws out an offensive player in accordance with scoring regulation 10.09.

According to scoring rule 10.10, fielders who make a significant contribution to an offensive player being forced out are given an assist (A).

How do you get an out in baseball?

In baseball, an out occurs when the umpire determines that a hitter or baserunner has been ruled out of the game. Any baserunner, including the batter-runner, is thrown out if they do any of the following:

  1. A fielder’s hand holding a live ball touches them when they are in danger, such as when they are not touching a base
  2. They stray more than three feet from the base (
  3. They are tagged out).

Does a strikeout count as a put out?

It is an out for the defense when a defensive player immediately records an out against either the batter or the baserunner. This can be done by fielding a fly ball, running to second or third base, or running to third base and tagging a runner. Ground balls provide the most putouts for first basemen, and strikeouts provide the most putouts for catchers, who rank second.

What is it called when a catcher throws someone out?

The term “putout” refers to when a defensive player immediately records an out against either a batter or a baserunner. This can be done by capturing or tagging a fly ball, tagging bases, or tagging a runner. Ground balls provide the most putouts for first basemen, whereas strikeouts provide the most putouts for catchers.

What is a PO in baseball?

An out is recorded by a fielder when he is the fielder who physically records the act of completing an out, whether it be by standing on the base for a forceout, tagging an outfielder, fielding a hit ball, or fielding a third strike. Definition.

What position gets the most assists in baseball?

If a shortstop fields a ground ball cleanly, the first baseman may lower his throw. In this instance, the first baseman would be penalized with an error, while the shortstop would be credited with an assist. Rabbit Maranville holds the record for the most career assists with 8,967 in his career.

What is a 6’4 put out?

Double play that happens when the ball is hit to the shortstop (6), then tossed to the second baseman (4) to throw out the runner, and then thrown to the first baseman (3) to strike out the hitter. The first out is recorded as a 6-4 out on the scoreboard.

What does DP mean in baseball?

A double play happens when two offensive players are declared out of the game at the same time during a single play. It is sometimes referred to as “a pitcher’s greatest buddy” since it is twice as beneficial to his cause as any other pitch that is thrown.

Is a passed ball an error?

A passed ball is not recorded as an error, but when a run scored as a consequence of a passed ball, it is not counted as an earned run against a pitcher in baseball. If a runner advances to second base as a result of a passed ball, he is not given credit for a stolen base.

What are the 3 basic skills of baseball?

Baseball may be broken down into three major abilities: throwing, catching, and hitting. Throwing, catching, and hitting are the three primary talents in baseball. The following are three skill categories in which young players should aim to develop their game if they have a strong interest and enthusiasm for the game of baseball.

What position is number 1 in baseball?

As is customary, each position is assigned a number that is used by the official scorer to keep track of the score: 1 (pitcher), 2 (catcher), 3 (first baseman), 4 (second baseman), 5 (third baseman), 6 (shortstop), 7 (left fielder), 8 (center fielder), and 9 (outfielder) (right fielder).

What are 5 rules in baseball?

Baseball has five fundamental rules that must be followed.

  • 1 – Make an investment in the proper equipment. 2 – Use a Ball Diamond to play on
  • 3 – Identifying and analyzing strikes 4 – Instructions on How to Play the Game
  • The Fifth Rule of Baseball: How to Score
See also:  How Long Do Baseball Games Typically Last

What counts as a put out for a catcher?

An automatic putout occurs when a batter is forced to leave the game because of an illegal pitch, bunting foul for a third strike (unless the foul ball is caught in mid-flight), striking out with first base occupied and less than two out (even if the catcher fails to catch the ball), being touched by his own batted ball, or batting.

Does an outfielder get an assist on a relay?

When an outfielder tosses the ball into the infield and an out is recorded as a consequence, the outfielder is credited with an assist. Nevertheless, if a relay throw is required, or if an infielder cuts the ball short in order to get an out at a different base, the outfielder is still given credit for the assist.

How is it possible to have a four strikeout inning?

The amount of four-strikeout frames – made possiblewhen a hitter gets first base after a third strike is dropped by the catcher pluseither first is vacant or there are two outs – has climbed tremendously in the 21st century.

What is the most common double play in baseball?

In baseball, the most common sort of double play happens when a runner is on first base and a ground ball is hit to or near the center of the infield.

What does DP flex mean?

The player that occupies the “Flex” slot on the lineup card is the one who actually plays. DEFENSEONLY. The DP and the Flex can both be on defense at the same time; the only difference is that the Flex does not bat in this situation. As previously stated, the DP might be playing defense for any of the other top nine players shown on the line-up card, in addition to himself.

What is a 1 6 3 play in baseball?

1-6-3 double play in the first half In order to force out a runner advancing to second base, the pitcher (1) fields a hit batted ball and throws it to the shortstop (6). In order to force the hitter out of the game, the shortstop throws to first baseman (3).

What do you call the center of the baseball?

Learners of the English Language Center field is defined as the portion of the baseball outfield that lies between right field and left field. Definition of center field: as well as the location of the man protecting the middle of the field

What is the 3 hole in baseball?

The third batter, who bats in the three-hole, is typically the best all-around hitter on the team, putting up a high batting average while not necessarily being the fastest player on the field.

What is an ABS test in baseball?

The MLB will expand testing of the Automatic Ball-Strike System (“ABS”), which began in the Atlantic League and Arizona Fall League and will be used in select Low-A Southeast games, in addition to the limitations on step-offs and pickoffs. The ABS will assist home plate umpires in calling balls and strikes, as well as ensure a consistent strike zone for the players.

How hard do d1 pitchers throw?

Division of the Prototype On a continuous basis, I pitching recruits throw anywhere between 87 and 95 miles per hour. It is vital to note that coaches are seeking for pitchers who can regularly throw at this velocity, rather than those who just sometimes hit that velocity. Top pitchers must also be able to command at least three different pitches.

9.09 Putouts

A putout is a statistic that is credited to a fielder whose action results in the out of a batter-runner or a runner, as defined in Rule 9.09 of the National League. A putout is awarded to any fielder who: (1) catches a ball in flight, fair or foul; (2) collects a hit or thrown ball and tags a base to put out a batter or runner; or (3) tags a base to put out a batter or runner who is trying to steal second base. 9.09 of the Rules of Civil Procedure (a) (2) Comment: If a fielder catches a thrown ball and tags a base to record an out on an appeal play, the Official Scorer shall credit the fielder with a putout.

  1. (b) When any of the following conditions are met, the Official Scorer shall award the catcher with an automatic putout: (2) batter is called out for illegally hit ball; (3) batter is called out for bunting foul for his third strike; (4) batter is called out for illegally batted ball.
  2. In addition to being called out for being touched by his own batted ball, a batter is also called out for interfering with the catcher and a batter is also called out for failing to bat in his assigned turn.
  3. After getting a base on balls, being hit by a pitch, or being interfered with by the catcher, a hitter is called out for refusing to touch first base; similarly, after advancing from third base to home plate, a runner is called out for refusing to advance from third base to home plate.
  4. If a runner is called out for crossing the line to avoid being tagged, the Official Scorer must provide credit for a putout to the fielder who the runner evaded being tagged.
  5. (5) When a runner is ruled out for running the bases in reverse order, the Official Scorer must credit the putout to the fielder who covered the base that the runner left when he began his reverse run.


When a runner is forced to advance, a force-out occurs when he or she either tags out the force-out runner or is thrown out by a fielder who holds the ball while touching the base toward which the forced runner is advancing (9-1-1 for special case.) A putout is the act of a fielder in which he or she successfully retires a hitter or runner. See 9-5-2 for a list of putouts that were attributed to the catcher and other fielders. An “out” is one of the three mandatory retirements of players from the team that is at bat in baseball.

This normally results in the batter being thrown out, however it does not in this case if the third strike is not caught and the batter-runner is able to lawfully reach first base on his or her own own.

A tag out includes the batter-runner who is not in contact with his base when touched with a live ball.

A putout generated by a throw to first base to retire a batter-runner, or to any other base to which a runner is forced or is compelled to retouch, is known as a throw out.

What Does PO Mean in Baseball? – A Simple Explanation

Baseball, like most other sports, is played using a system of codes, gestures, and acronyms. The answer to the question “what does PO signify in baseball” should act as the first step in becoming more familiar with the game of baseball. As you progress through the game, you will soon find that the interactions are made up of a variety of signals and codes. Learning is a never-ending process that never ends. And, for the most part, learning involves doing and experiencing the dynamics that surround the PO rules in their natural environment.

What Does PO Stand for in Baseball

Among other things, the acronym PO means “putout” in baseball, as well as “pitcher only.” The putout (PO) is a credit awarded to the fielder who is able to physically document the whole occurrence of an out during play. It is necessary to make several adjustments while recording an out. The following maneuvers are examples of such actions: tag-a-runner, touching the base during a forceout, catching the third strike, standing closest to the baserunner who committed an interference, and catching a hit ball.

On the other side, the pitcher only (PO) designation denotes that a player is only concerned with performing his or her pitcher’s duties and is not permitted to bat or play other positions in the field.

Who Gets the Putout (PO) Credit

The following players are eligible to get putout credit:

  • Fielder: A fielder is simply a defensive player who plays the position of fielder. A pitcher, in addition to being a fielder, is responsible for defending the base by preventing the offensive team from entering the running position. It’s only via recording an out from the other team that they can accomplish this.

It is common to see fielders with a glove on their non-dominant hand, while their dominant hand throws the ball to the other team. Additionally, fielders can receive an unassisted putout in addition to the putout (PO). It is possible to get this credit if you do specific actions such as stepping on a base during a forceout, fielding a ground ball, or tagging a runner. In this particular instance, the rule states that the fielder is not eligible to receive the assist credit.

If the fielder takes the ground ball and promptly transfers it to a teammate, therefore inducing an out on the other side, he earns credit for an aided putout (see below). At this time, the fielder will have accrued a point from both “putout” and “assist” movements, bringing his total to two points.

  • Catcher: During the course of the game, a catcher is responsible for a variety of tasks. When a catcher is able to catch pitches that result in strikeouts, he is awarded a putout.

Catchers and first basemen are often the players who receive the highest PO baseball score!

  • One of the primary responsibilities of a first baseman (1B) is to field first base and supervise the activities that take place in the area immediately surrounding it, such as the succession of baserunners.

In the event that a first baseman gets throws on a ground-ball out, the putout will be recorded against him.

Why is a Putout (PO) Important

Because it serves as the building block for the more intricate baseball scoring movements, a putout is extremely significant. Particularly beneficial to the official scorer is the ability to determine the highlights, outputs, and destiny of the teams participating in the game. A full report describing the batter’s moves from being left on base to being scored or put out can be generated by the scorer in PO or putout baseball cases. Once the scorer has completed the report, he may draw conclusions about a team’s plate appearances and demonstrate that they are equal to all of the movements the team earned throughout the game — runners left on base, overall outs earned by the team, and total runs scored.

It would be difficult for either team to get points if they did not put forth any physical effort to record an out.

When Does a Player Become a Pitcher Only (PO)

Depending on the coach’s decision, a player may be assigned to the pitcher-focused position. Coaches are always in charge of determining when and when a player is designated as a pitcher exclusively (PO). It is not necessary for a coach to assign a player to the PO position to imply that the player is not capable of playing other positions on the squad. The coach takes the authority to choose whether or not someone should be given the PO for strategic reasons. Some players have the ability to multitask, switching from being a hitter to a baserunner to a fielder, and so on.

Even the formal status of the designation may vary over time, based on the choice of the team’s coach, which is another another variable to consider.

  • Having a separate practice session is necessary because coaches view the assignment of the PO position as a privilege bestowed upon the player.

In the majority of occasions, the pitcher position falls to a player making the move from a little-minor league (rookie) to a major league organization (advanced). As a result of the increased level of competition in major league games — not to mention the fact that the starting pitcher position is considered to be one of the most important and difficult roles in baseball — a more mature player would naturally require a significant amount of pitching practice outside of the team.

This should be perceived as favorable to the player, especially considering the fact that not everyone on the squad receives adequate training time. If the coach sees you as a potential asset for pitching, he will make certain that you have regular separate sessions with the team.

  • The dynamics of the team: The coach is unable to select players for the PO position at random. His work description necessitates him analyzing not only the individuals on his team, but also the team’s overall effectiveness.

The team’s overall performance and eventual victory are heavily influenced by the relationships that exist between its members. Coaches would occasionally rearrange players’ positions and chose one to focus on as the primary offensive player. At other occasions, the coach would just stay with a predetermined group of players. All of the decisions taken by the coach should, according to tradition, be in the best interests of the squad.


So, what exactly does PO stand for in baseball? Putout or pitcher-only are the only two options. The putout is a reward given to fielders, catchers, baserunners, and other players who have successfully completed specific maneuvers throughout the course of a game. The pitcher-only position is one that is assigned by the team’s coach to a player who is only responsible for pitching. There are a variety of reasons for assigning this position.

Leave a Reply

Your email address will not be published.