## What Does OPS Mean in Baseball – What is a Good OPS?

Baseball may just be the perfect sport for math nerds, according to some experts. The OPS package, for example, incorporates formulae from various statistics, which makes it really fascinating to use. However, despite the fact that it appears to be a convoluted method, the outcome is clear: calculating OPS, or on-base plus slugging, may be a rapid way to determine a player’s true contribution to his club. OPS (on-base percentage) is a unique baseball statistic that is explained in detail in this article.

## How is OPS Calculated?

OPS is one of those statistics that must be interpreted in conjunction with other data in order to make sense. To compute On-base plus slugging, we’ll need two statistics: first, the number of times a player has reached base.

- Percentage of time spent on base (OBP). It is a cold, hard statistic that measures how many times a player gets on base by any method in comparison to the total number of at-bats they have had throughout their career. It makes no difference how a player gets on base in the OBP game. Were they tainted with something? Walked? Did they make contact? It everything contributes to their overall batting average (OBP)
- Slugging average (SLG). Unlike other stats, this one is a system that measures the quality of a player’s strikes. The batting average of a baseball player, for example, does not tell you how often they hit the ball
- It just tells you how often they scored a hit. SLG includes the quality of those hits into the calculation by including the amount of bases reached as a component of the equation. An individual player might theoretically have a slugging average of 4.000, which would result in an optimum ratio of home runs to at-bats. That is to say, if a player only has one at-bat and hits a home run, his slugging average will be 4.000 points higher than normal. An SLG of 1.000 indicates that a single was hit in a single at-bat, and so on.

Keep in mind that there are some uncommon instances (such as sacrifice flies) that do not count toward at-bats and, as a result, have no meaningful influence on either of these statistics. The terms OBP and SLG are certainly familiar to you; OBP is a rate measure, and SLG is a rate and quality metric. When you combine the two metrics, on-base plus slugging, you get a more complete picture of a player’s ability to smash the ball hard. What is the formula for calculating it? Simply add the two numbers together.

## What is a Good OPS in Baseball?

For fans of Major League Baseball, it might be difficult to make sense of how OPS works on sometimes. What does it have to say about the look of the plates? What is the overall quality of the ballpark in which they are playing during the season? What is the total number of bases they have amassed? To obtain a real understanding of what a good OPS is, it’s helpful to first establish a standard of comparison. Here are a few of the top OPS in Major League Baseball history:

- With an OPS of 1.1636, Babe Ruth is the all-time leader
- Mike Trout is among the all-time OPS greats who are still active, with a career average of around 1.0000
- Barry Bonds ranks 4th on the list as of 2020, with an OPS of approximately 1.05
- Lou Gehrig ranks third with an OPS of 1.07
- And Ted Williams of the Boston Red Sox is the only other player outside of Babe Ruth who has an OPS of 1.1 or higher over his This is among players who have accumulated at least 3,000 at-bats.

Of course, this only provides us only one end of the range to work with. What about the overall average of the league? A look at the data for Major League Baseball reveals that the league average in on-base plus slugging is often between 0.700 and 0.800.

## What is the Highest OPS in Baseball History?

Already, we’ve shown you the player who has the greatest careerOPS, Babe Ruth of the New York Yankees, in our previous post. His 1.1636 OPS over that many at-bats may never be surpassed, putting him in the running for the title of greatest hitter of all time. However, this is merely one method of looking at the stats. Season-to-season comparisons of metrics such as on-base percentage (OPS) are important because they reveal exactly how spectacularly certain players have reached the pinnacle of their careers.

- Babe Ruth, 1920: 1.3791
- Barry Bonds, 2001: 1.3785
- Babe Ruth, 1921: 1.3586
- Babe Ruth, 1923: 1.3089
- Babe Ruth, 2004: 1.4217
- Babe Ruth, 2002: 1.3807
- Bab

Eventually, Ted Williams enters the picture, having posted the 7th-best offensive season in baseball history. When Rogers Hornsby appears on the list, it is at the thirteenth position that a fourth player is included.

## What about High OPS Seasons in Recent Years?

- Juan Soto of the Washington Nationals had the best OPS in 2020, batting 1.1846 with a 1.1846 on-base percentage. That was good enough for the 25th greatest OPS season in baseball history
- In 2019, Christian Yelich of the Milwaukee Brewers hit 1.1001, which was strong enough for a season in the top 100 of all-time OPS rankings

## Are there Better Stats than OPS?

A hitter’s talent can be evaluated by adding up his or her slugging % or slugging average with his or her on-base percentage, which some may argue is a rudimentary method of doing so. However, it is possible that there is more to it than you realize. After all, on-base percentage (OBP) includes at-bats, walks, sacrifice flies, and the number of times a batter is hit by a pitch. Overall, the OPS statistic takes a variety of factors into consideration, including at-bats and total bases. Hits, walks, HBP, and even sacrifice fly are all accounted for in the overall calculation.

Optimal team performance (OPS) is popular because when calculated for an entire team, it has a strong correlation with how many runs the team has scored. This is why many people consider it to be an effective tool to evaluate a batter’s offensive output on a consistent basis.

## What about OPS+?

The OPS+ statistic, which takes this statistic and “normalizes” it across the league, is also available. A player’s OPS+ takes into account external factors such as the ballpark in which he or she was hitting. It is calculated such that an OPS of 100 represents the league average, which provides people with an immediate understanding of how a player’s offensive productivity compares to the rest of the team. As a result, the statistics of a Cubs player may differ from those of a Dodgers player, who in turn may differ from the statistics of a Cardinals player or a White Sox player.

When a player is free agent, OPS+ is important because he or she may benefit from primarily playing in a smaller ballpark where it is easier to hit home runs, which can increase his or her value.

## Conclusion

The on-base average and slugging percentage, when combined, can provide useful information on a player’s offensive performance in the big leagues. However, like with any other sabermetrics in baseball, it’s not always simple to quantify everything without actually seeing it firsthand in action.

## Similar Posts

In baseball, what exactly is a putout? What is Batter’s Eye? What Does the Abbreviation QAB Mean in Baseball? Baseball GM (General Manager of Baseball) What is the definition of a hold in baseball? Bases are being stolen in baseball. In baseball, what exactly is a quality start? In baseball, there is a magic number. What is the role of a baseball manager? Baseball with a Can of Corn What Is the Meaning of Batting Average? What is a Knuckleball and how does it work? Coach on the Baseball Bench What is a No-Hitter, exactly?

Baseball Doubleheader in the horizon Baseball is a hit-and-run sport.

What is a Spitball Pitch, and how does it work?

## About those odd baseball statistics

If you’ve been a part of CougCenter for any amount of time, you’re probably aware of our fondness for rate statistics and our distaste for unstructured data. Normally, we reserve our wrath for outmoded basketball statistics, given that our two primary sports are football and basketball. However, with the birth of the baseball club and the ensuing analysis that follows, here’s a brief guide to some of the numbers we’re referring to. The following definitions are taken from The Hardball Times glossary.

You may hear us refer to a person as having a line of.333/.405/.556.

Its purpose is to provide a comprehensive picture of the hitter’s abilities.

- Batting Average (BA) is calculated as follows: Hits divided by At Bats. From 2006 to 2008, the average for college baseball was.293
- On-base Percentage (OBP): The percentage of plate appearances in which a hitter successfully reached base, including singles, walks, and pitches hit by pitch. When understood as the number of times a hitter did not go out, on-base percentage (OBP) is a very effective performance indicator. From 2006 through 2008, the average for college baseball was.369
- Slugging Percentage (SLG) is calculated as the sum of all bases divided by the number of at bats. Singles are worth one base, doubles are worth two bases, and so on and so forth. This results in On-base Plus Slugging (OPS), a rough but rapid assessment of a batter’s genuine contribution to his team’s offense, which was.425 in the six-year period 2006-2008. Simply combine the OBP and SLG together. From 2006 through 2008, the average for college baseball was.795

Here are some other statistics that we used:

- The earned run average (ERA) is calculated as follows: the number of earned runs allowed divided by the number of innings pitched multiplied by nine. According to this article, it is a lousy indicator of a pitcher’s real performance, but it is the best we can do until someone begins publishing more advanced pitching stats for college baseball. From 2006 through 2008, the average college baseball score was 5.27. (I’m willing to bet you didn’t realize it was that high, did you?)
- Isolated Power (ISO): This metric measures the “real power” of a batter’s performance. SLG-BA is the formula to use. From 2006 through 2008, the average for college baseball was.132. Strikeout Percentage/Strikeout Rate (SO percent): On offense, how frequently a hitter strikes out when coming to the plate
- On defense, how often a batter strikes out when coming to the plate
- On defense, how often a batter strikes out when going to the plate. The number of strikeouts divided by the total number of plate appearances. From 2006 to 2008, the average percentage of college baseball players was about 16 percent. Baseball’s batting average on balls in play (BABIP): This is a measure of the number of batted balls that safely fall into the outfield for a hit (excluding home runs).

What source did you use to obtain those averages? In order to complete the calculations, we downloaded the raw CSV data from here (really, how did anybody ever do research before the Internet? ), imported it into Excel (again, how did anyone ever do research before computers? ), and performed the calculations ourselves from there. However, there was one tiny snag: some of the player data included missing aspects (such as total at bats, home runs, or other stats), so we decided to simply eliminate such individuals from the overall data set.

We believe that considering about 95 percent of player performance provides us with a very accurate view of national averages, don’t you?

## What Is OPS in Baseball? Well, It Measures…

There are several approaches of evaluating baseball players, as well as numerous schools of thought on the most effective method of doing so. The earned run average (ERA) of a pitcher is widely considered to be the most reliable conventional statistic for determining his or her performance. Ops, on the other hand, has become a common measure for evaluating hitters in order to quantify their overall effectiveness. As a result, what exactly is OPS in baseball? On-base plus slugging (also known as OPS) is a statistic that attempts to assess a hitter’s overall effectiveness by combining two figures that reflect how well he is at reaching base and hitting for power: on-base percentage and slugging percentage.

In the meanwhile, let’s get down to business and answer the burning question.

## What Is a Batter’s OPS?

In addition to On-Base, On-Base Plus The slugging percentage of a player is the sum of the player’s on-base percentage and slugging percentage. The on-base percentage (OPS) of a player demonstrates his or her ability to reach base and hit for power. On-base Plus is a slang term for Slugging percentage, often known as On-base percentage (OBP), is a combination of a batter’s On-base percentage (OBP) and Slugging percentage (SP) (SLG). The stat was created to analyze a batter’s ability to reach base and hit for power, which are the two key tasks that are regarded to be the most significant for hitters in baseball at the time of its creation.

You may calculate an OPS by adding these two values together, and voilà, the league OPS for 2019 was.758.

These prices, on the other hand, will alter over time as more and more people join the club.

Because a batter’s OPS tends to hold up better over time than counting figures, it may be used to evaluate batters even when comparing two players who have a significant difference in playing time.

## How Do You Calculate OPS?

As we previously discussed, On-Base Plus is a type of military base. Slugging percentage, often known as on-base percentage and slugging percentage, is the sum of a player’s on-base percentage and slugging percentage. Put another way, you can compute an OPS by simply putting the two numbers together. The on-base percentage (OPS) of a hitter cannot be calculated, however, without these data. Because the complete OPS calculation is lengthy and difficult to compute on its own, it is preferable to calculate OBP and SLG separately and then combine them.

- In order to do so, sum up all of the hits, walks, and hit by pitches, then divide the total by the number of at-bats plus walks, sacrifice flies, and hit by pitches to get the on-base percentage.
- As a consequence, the calculation for OBP looks somewhat like this: At bats + walks + hit by pitch / (at bats + walks + hit by pitch + sacrifice flies) = On Base Percentage (OBP).
- Simply combine the two figures together to obtain the overall probability of success (OPS) for each situation.
- Using the on-base percentage calculation, the values for hits (30), walks (10), and HBPs (5) total up to 45 when multiplied together.
- The hitter’s on-base percentage is calculated by dividing 45 by 120, which equals.375.
- On the batting average side, the total bases from singles (15), doubles (10), triples (15), and home runs (20) add up to a total of a.600 slugging percentage.

For the purposes of illustration, the entire equation is written as follows: With all of that work spread out in front of you, it’s usually better to compute the two figures individually in order to keep everything a bit more organized.

## Why Is OPS a Good Stat?

On-base Plus Slugging is one metric that has remained mostly concealed in plain sight throughout history and has just lately been recognized as being significant. In the world of so-called “advanced” metrics, on-base percentage (OPS) is one of the simplest to compute and utilize. It is comprised of the two values created by the two most significant talents for hitters: reaching base and hitting for power. Because of these two elements, on-field performance (OPS) is a simple metric for fans to locate, compute, and understand.

- OPS, on the other hand, is by no means impenetrable.
- According to theSporting News’ evaluation of on-base percentage (OPS), David Ortiz topped all of Major League Baseball with a 1.021 OPS in 2016, yet in 2000, same score would have matched him for 16th place in the league.
- Because OPS is sensitive to changes in ballpark dimensions and league-wide adjustments, it is not the be-all and end-all metric.
- This statistic is far more sophisticated, since it normalizes a player’s OPS based on league and park considerations, with 100 serving as a reference point for comparison.

## What Is a Good OPS in Baseball?

On-base Plus Slugging is one metric that has remained mostly concealed in plain sight throughout history and has just lately been recognized as being significant in sports. In the world of so-called “advanced” metrics, on-base percentage (OPS) is one of the simplest to compute and utilize. It is comprised of the two values created by the two most significant abilities for hitters: getting on base and hitting for power (see below). For fans, OPS is a simple statistic to locate, compute, and analyze as a result of these two characteristics.

OPS, on the other hand, is by no means impenetrable.

TheSporting Newsreported that David Ortiz had a 1.021 OPS in 2016, yet in 2000, that score would have only matched him for 16th place in the league’s overall OPS rankings, according to their analysis.

In the same vein, The fact that OPS is subject to changes in ballpark dimensions and league-wide adjustments means that it is not a panacea, and a new metric known as OPS+ was developed to overcome this issue.

These are significantly more complicated stats, and they normalize an individual’s OPS by taking into account various league and park characteristics, with 100 serving as a starting point. This statistic, on the other hand, will not be discussed in depth in this piece.

## When Did OPS Become a Stat in Baseball?

On-base Plus is made up of several components. Slugging (both on-base percentage and slugging percentage) has been around for a very long time. Branch Rickey was a pioneer in the development of the on-base percentage statistic in the 1940s and 1950s, and he was credited with inventing the concept. A metric known as “Extra Base Power” was also established by him, and he even reasoned that the two statistics might be combined to determine an individual batter’s total performance. Apparently, Rickey was decades ahead of his time in terms of thinking.

However, it wasn’t until the rise of sabermetrics in the late 1990s and early 2000s that baseball began to take the overall OPS (as well as its components) seriously.

The on-base percentage (OPS) is not regarded an official statistic by Major League Baseball, despite the fact that it is well known and highly accepted today.

After reading this, the next time you see a batter’s OPS, you will have a better understanding of whether you should be optimistic about him or if you should be concerned.

## Highest Career OPS

Babe Ruth, who is in the Hall of Fame, holds the record for the best career On-base Plus Slugging percentage with a 1.164 OPS throughout his 22-year professional baseball career. Seven batters have concluded their careers with an OPS greater than 1.000, with Mike Trout now straddling the line between the two categories.

## Highest Single Season OPS

Barry Bonds owns the single-season record for the greatest On-Base Plus Slugging percentage (1.422) with a mind-boggling 1.422 in 2004. He also established an MLB record with an on-base percentage of.609 and a slugging percentage of.812, both of which were the highest ever recorded.

## What Is Batting Average?

The batting average demonstrates a player’s ability to put the ball in play and advance to the next base. The batting average of a hitter is derived by dividing the total number of hits he has received by the total number of at-bats he has had. It is important in measuring a player’s performance at the bat, but it does not take into consideration walks, sacrifices, and other factors.

### Related Articles

- What is the definition of a Designated Hitter in baseball? What is the definition of MVR in baseball? A Comprehensive Guide to the Rule
- What Is the Meaning of WAR in Baseball? The Complete Guide to Getting Started
- What is the definition of WHIP in baseball
- In baseball, the term “left on base” (LOB) refers to the number of runners who have been left on base.

## On Base Plus Slugging (OPS) All Time Leaders on Baseball Almanac

When Branch Rickey and Allan Roth invented the on base percentage statistic in the 1950s, they were looking for a way to track the number of times a player reached any base. The sacrifice fly designation was not included in the initial version, but when it was formally adopted in 1984, it was included using the procedure outlined in the preceding section. Later, Slugging Average was established, and the two were merged to form On Base Plus Slugging, which stands for On Base plus Slugging. The player must have played a minimum of 1,000 career games in order to be included on this list of the one-thousand greatest on base plus slugging leaders.

- “Similar to a dog who has never been given table scraps.
- I’m pretty curious.
- I’m hoping to be able to do so this year, and I’m hoping it will be possible.
- I have set a one-year goal for myself.” The Baseball Digest published an article by Todd Helton (May 2004) Babe Ruth owns the record for most wins in the American League, and Manny Ramirez is the only current player who “appears” to be in with a chance.
- Perhaps the 1.000 OPS Club should be established by Baseball Almanac as a new “club” inside the organization.

What do you think of the on-base plus slugging percentage? Like this one, do you find it interesting to argue and debunk complicated statistics like this one? Bring your friends and family to join us onBaseball Fever, where we have a forum dedicated to the discussion of SABRMetric statistics.

## What Is A Good Batting Average?

Batting average is extremely significant when discussing hitters and their respective scores in baseball since it is a game of numbers as well as a game of statistics. This statistic provides an overall indication of how a batter or hitter has performed up to that point in the game. According to statistics, a batting average (BA) greater than 300 is regarded good for Major League Baseball (MLB) and Minor League Baseball (MLB) players. A good college BA is greater than 400 points, and a good high school BA is greater than 500 points, respectively.

Skill Level | Batting Average |

MLB | 300 |

Minor League | 300 |

College | 400 |

High School | 500 |

Youth | 600 |

Sources:mlb.com,baseballrefrences.com,ncaa.com,sabr.org

## MLB Batting Average

In recent years, a season batting average of above 300 is considered excellent! The majority of batters/hitters receive scores below 270, with some receiving scores as low as 240. A batting average of over 400 has been achieved in the past, but it is considered to be a virtually impossible ambition nowadays. Recent Major League Baseball statistics reveal that the league’s overall batting average has dropped to its lowest level since 1968, with a 238 batting average.

## Minor League Batting Average

The top batters in Minor League Baseball average over 300 points every season, while the majority of strong batters average over 250 points per season on a continuous basis from season to season.

## College Batting Average

The average batting average of a batter/hitter should be over 400 points to be regarded good. Depending on the caliber of skill on the teams and how challenging the league is during that season, top batters can score an average of more than 500 runs in a season. A wonderful transitional level of baseball, college football serves as a perfect testing ground for players to see if they are ready for the rise in quality, as well as the pace and talent, that comes with playing in the higher professional levels.

## High School Batting Average

It is recommended that a decent batting average for high school athletes be greater than 500. When evaluating a batter’s success rate, high school coaches like to utilize the batting average on balls in play (BABIP) statistic. In baseball, BABIP is the batting average that is calculated only on the basis of balls that are hit into the field of play. After ten years of data collecting utilizing the BABIP of high school players, the average player’s BABIP has been determined to be 340.

## Youth Batting Average

For high school athletes, it is recommended that they have a batting average of above 500. When evaluating a batter’s success rate, high school coaches like to utilize the batting average on balls in play (BABIP) metric. In baseball, BABIP is the batting average that is calculated only on the basis of balls that are hit onto the playing field. Using the BABIP of high school players as a data source for over ten years, the average player’s BABIP has been determined to be 340.

## Who Developed The Batting Average Statistic?

Henry Chadwick, an English statistician who worked in the early phases of baseball’s growth as a sport, had a significant impact on the sport’s evolution. Chadwick grew up playing cricket and utilized his understanding of the sport to convert the cricket batting average statistic to operate in baseball, which he called the “batting average function.” Recognizing the variations between the two sports, Chadwick made modifications to the formula to account for the variances in rules and conceptions between cricket and baseball, respectively.

The batting average in cricket is calculated by dividing the number of runs scored by the number of outs. However, rather than just replicating this formula, Chadwick realized that hits divided by at-bats would offer a more accurate estimate of a player’s hitting skill.

## How Do You Calculate Batting average?

Calculating a batter’s batting average is accomplished by dividing the player’s Hits by the player’s total At-Bats and aiming for a result that is less than zero. Even though it will be displayed as a decimal number, it is most often read without the decimal. It is considered a hit, also known as a Base Hit, whenever an outfielder makes an unforced error or makes a fielder’s choice, and the batter successfully hits the ball within the field of play, allowing him to advance to first base. Anat-batis a more specific reference to the look of a plate.

There are certain exceptions to the rule about a hitter obtaining an at-bat.

- The hitter is awarded a base-on-balls in the inning. The hitter gets struck by a pitch
- The batter makes a sacrifice fly or a sacrifice hit
- The batter is intentionally walked. It is determined that the batter was awarded first base as a result of the catcher’s interference or obstruction. While the batter is still at bat, the inning comes to a close. The batter is replaced before the batter’s at-bat has been completed.

Batting average is one of the most often used statistics to assess a batter’s performance at the plate, and it is also one of the oldest. Given that it does not take into consideration when a hitter reaches base as a result of walks or being hit by pitches, it is not the most thorough method of determining the real successof a batter. It also does not include the hit-type attribute. All of these components of the baseball game have an impact on the batter’s ability to hit the ball successfully.

The player’s relative batting average is computed by dividing the player’s batting average by the total batting average of the league.

This improves the accuracy of the computation by taking into account the general level of performance for that season of the league.

## Highest Batting Average In A Season

Hugh Duffy was a professional baseball player from 1888 to 1906, during which time he established the record for the greatest hitting average in a single season in 1894. Duffy was a member of the Chicago White Stockings, the Chicago Pirates, the Boston Red Sox, the Boston Beaneaters, the Milwaukee Brewers, and the Philadelphia Phillies, among other organizations. While with the Boston Beaneaters, he set the record for greatest hitting average in a single season, an accomplishment he attained during his stay there.

This occurred during the American League’s inaugural season of competition.

Gary Redusset the record for the best single-season hitting average in Minor League Baseball in 1978 with a batting average of 462, which still stands today.

With a batting average of 551 for the season in 1980, Keith Hagman set an NCAA record as the player with the best batting average in college baseball.

He played for the University of New Mexico. Melvin Begley and Rod Tartsan hold the record for the greatest batting average in a single season in high school baseball, with both players having averages in excess of 700, according to statistics.

## Highest Batting Average Of All Time

Ty Cobb was a professional baseball player for 24 years, during which time he held the record for the greatest batting average in the history of Major League Baseball. Cobb has a lifetime batting average of 366 over the course of 24 seasons with the Atlanta Braves. With 11 Batting Title victories, Ty Cobb is considered to have established the record for the most Batting Title victories in a career. Between 1909 and 1919, he is known to have scored an average of more than 360 points a season for 11 consecutive seasons.

He eventually rose through the ranks to become a player-coach for the club.

## Conclusion

At different levels of baseball, there is a discernible difference in the Batting Average. It is because of the high level of quality in pitchers and fielders, as well as the rapidity with which the game is played, that professional leagues have a lower average. TheBatting Titleis an honor bestowed to the hitter who has the greatest batting average in the league for the whole season in which the award is granted. To be eligible for the Batting Title, a minimum of 3.1 Plate Appearances must be obtained.

## College Baseball Recruiting Guidelines

“Do I have what it takes to play collegiate baseball?” “How excellent do you have to be?” says the narrator. These are the two most often asked questions among student-athletes. Only a small percentage of high school baseball players go on to play Division 1 college baseball, but there are more options in the lower divisions. When it comes to height, weight, and talent, understanding what college baseball scouts are looking for in position players may assist student-athletes in narrowing down their college search to institutions that offer the level of competition that is the greatest match for them.

## How to use the baseball recruiting guidelines

The arm strength, fielding range, speed, and hitting power and average are all factors considered by college baseball scouts when evaluating prospects. When it comes to recruiting rules, student-athletes can use them as a suitable benchmark to compare themselves to athletes participating at the collegiate level. What characteristics do college baseball scouts look for at each position in general? What skill sets should be had by specific position players? To provide recruits and their families with a clearer idea of what would be required of them at each post, this section breaks down divisional recruitment criteria into subsections.

- Recruiting guidelines are simply that: guidelines. They are not binding. These are basic guidelines for what coaches are looking for, although there will be some exceptions to the rule. Coaches are looking for players that will be the greatest fit for their squad. For coaches looking for recruits, particularly at the Division 1 level, travel ball experience is a critical source of information. An evaluation by a trusted third-party or by a current coach will give an objective assessment of how a recruit compares to scholarship-level players in accordance to these principles, and will help the recruit make informed decisions about their future. In order to measure and enhance their standing in the recruitment process, recruits and their parents can contact our staff at 866-495-5172.

Return to the top of the page

## What do college baseball coaches look for in recruits?

In their evaluations of prospective players, college coaches are continually trying to forecast how well they will do at the collegiate level. The most common concern that recruits or their parents have is that, while a recruit may be extremely talented at the high school level, if they are not competing against college level competition, they are of little use to a college coach. At the collegiate level, the game is played significantly more quickly. Recruits must demonstrate the necessary strength, speed, and overall athleticism in order to make the transition.

Coaches are paying attention to how a prospect conducts themselves prior to the game, during the game, and after the game, among other things.

All else being equal, a prospect who has the will to work hard will be recruited above a potential who possesses the talent but lacks the necessary work ethic to succeed. When it comes to baseball camps, what is the usual cost? Return to the top of the page

## What age do scouts look at baseball players?

Coaches will begin evaluating prospects as soon as they have reached a level of physical development that allows them to make a fair prediction of how they will perform as an 18- to 21-year-old athlete in the future. What makes this challenging for many recruits is that certain coaches are willing to project sooner than others, and athletes develop at varying rates depending on their developmental stage. Prospects hoping to be recruited have little influence over how quickly they grow or what coaches think of them once they are recruited.

Find out more about AAU baseball teams and competitions by visiting their website.

- Experience with a travel baseball club: 3–4 years of high-level travel baseball
- Awards and distinctions include: several All-Conference, All-Area, and All-State selections
- All-American awards
- And All-American honors. Years as a varsity starter: 3–4 seasons

Division 2 is the second division in the United States.

- Experience with a trip baseball club: 2–3 years of high-level travel baseball
- Awards and honors have been bestowed on me several times. All-Conference, All-Area, and maybe All-State recognition
- Years as a varsity starter: 2–3 seasons

Division 3 and the National Association of Intercollegiate Athletics

- Experience with a club: 2–3 years of travel baseball experience
- Awards and honors have been bestowed on me several times. All-Conference and All-Area recognition
- 1–2 seasons as a starter with the varsity team

Junior College (also known as junior college) is a type of college that is open to students in grades 9 through 12.

- Experience with a club: 2–3 years of travel baseball experience
- Awards and honors have been bestowed on me several times. All-Conference and All-Area recognition
- 1–2 seasons as a starter with the varsity team

Return to the top of the page

## What do college baseball scouts look for in a pitcher?

Division 1 is the most competitive division in the league.

- Pitch velocity: 84 MPH consistently
- Up to 95+ MPH when necessary
- Command of at least three pitches
- ERA: less than 2.00
- A minimum of one strikeout every inning pitched
- Fewer than one hitter is walked every two innings pitched

Division 2 is the second division in the United States.

- Speed of one off-speed pitch and one additional pitch thrown to places consistently
- Pitch velocity: 82 MPH to 90 MPH or more
- Control of one off-speed pitch and one other pitch thrown to spots consistently
- ERA: less than 3.00
- Approximately 1 K for every 1 inning pitched
- 1 batter is walked around for every 2 innings pitched by the pitcher.

Division 3 and the National Association of Intercollegiate Athletics

- Control of at least one off-speed pitch while developing another is required. Pitch velocity ranges from 77 to 82 miles per hour. The ratio of strikeouts to walks is one to one
- The ERA is 2.50–3.50.

Junior College (also known as junior college) is a type of college that is open to students in grades 9 through 12.

- 80 MPH constant pitch velocity
- 1 or fewer than 1 K per inning pitched
- 80 MPH consistent strikeout rate
- ERA is less than 4.00

A D1 baseball pitcher’s physical appearance is as follows: Nelson Gord, a former D1 baseball player and current NJCAA coach, explains down the characteristics that D1 college coaches look for in both right-handed and left-handed pitchers. Return to the top of the page

## What do college baseball scouts look for in a catcher?

Division 1 is the most competitive division in the league.

- Body measurements: 6’1″
- Weight range, 185–200 lbs. Coaches will pay special attention to catch and throw technique, as well as arm strength demonstrated when throwing to second and third base. When recruiting catchers, Division 1 coaches will seek for players that have exceptional leadership abilities and the ability to collaborate with their whole pitching staff. Division 1 catchers have strong bat swings and can hit for power or average at a high level in most situations. Slugging percentage:.600 (minimum of two at bats each game)
- On-base percentage:.500 1.95 and lower consistently (as verified by an impartial source)
- An ERA of less than 2.00
- A pop time of 1.95 and below consistently

Division 2 is the second division in the United States.

- Height: 6’0″
- Weight: 180 lbs
- On-base percentage:.450
- Slugging percentage:.550 (minimum of two at-bats each game)
- When it comes to pop time, it should be 2.0 or lower on a consistent basis (as validated by an impartial source)

Division 3 and the National Association of Intercollegiate Athletics

- Height: 5’11”
- Weight: 180 lbs
- OBP:.400
- Slugging:.500
- Pop time: 2.0 – 2.1
- Height: 5’11”

Junior college is a type of college that is designed for students who are in their first year of college.

- The following statistics apply: height: 5’10”
- Weight: 170 lbs
- OBP:.350
- Slugging:.450
- Pop Time: 2.1 or less

What is the most effective method for high school catchers to sell themselves to Division I college coaches? Check out the video below for some advice from Nelson Gord, a former D1 baseball player who is now an NJCAA coach. Return to the top of the page

## What do college baseball scouts look for in a first baseman?

Division 1 is the most competitive division in the league.

- When I was a junior and senior in high school, my height ranged from 6’2″ to 6’6″ and my weight ranged from 190 to 240 pounds. Slugging percentage:.750 (minimum of two at bats each game)
- On-base percentage:.500

Division 2 is the second division in the United States.

- Height: at least 6’0″ is required. A minimum of 180 pounds in weight is required. It is necessary to exhibit the capacity or capability to strike with force. As a junior and senior in high school, a strong 1B recruit in this tier should have a couple home runs and a significant number of RBIs.

Division 3 and the National Association of Intercollegiate Athletics

- Height: 6’0″
- Weight: 180 lbs
- Power numbers: three home runs and twenty-five RBIs

Junior College (also known as junior college) is a type of college that is open to students in grades 9 through 12.

- The player is 5’11” and weighs 170 lbs. His power numbers are 2+ home runs and 20+ RBI.

When it comes to recruiting first basemen, what characteristics do Division I college coaches look for? In the video below, Nelson Gord, a former Division I baseball player who is now an NJCAA coach, discusses how athletes might capture the attention of college coaches. Return to the top of the page

## What do college baseball scouts look for in a third baseman?

Division 1 is the most competitive division in the league.

- Height: 5’10″–6’3″
- Weight: 180–220 lbs
- Infield velocity: 85–95 MPH
- HR: 5–10 as a junior and senior in high school
- OBP:.500
- Slugging:.750
- Batting average:.500
- Slugging percentage:.750

Division 2 is the second division in the United States.

- Height ranges from 5’9″ to 6’3″
- Weight ranges from 170 to 220 pounds. With the possibility to increase via growth, the infield velocity should be at least 80 miles per hour. As a high school junior and senior, you must have at least 2 HR
- Your OBP and SLG must be at least.400 in each category.

Division 3 and the National Association of Intercollegiate Athletics

- The player is 6’0″ and weighs 180 lbs. His power numbers are two or more home runs and twenty-five or more RBI.

Junior college is a type of college that is designed for students who are in their first year of college.

- The player is 5’11” and weighs 170 lbs. His power numbers are 2+ home runs and 20+ RBI.

Is there anything else that D1 college coaches look for in a potential third base prospect other measurables? Check out the video below to hear Nelson Gord, a former D1 baseball player who is now an NJCAA coach, give his third basemen recruitment recommendations. Return to the top of the page

## What do college baseball scouts look for in a middle infielder?

Division 1 is the most competitive division in the league.

- Height: 5’8″–6’2″
- Weight: 165–190 lbs
- 60-yard dash: 6.5–6.8 seconds (as validated by a third party)
- Height: 5’8″–6’2″
- Weight: 165–190 lbs Infield velocity: Division 1 middle infield recruits will throw the ball across the diamond at speeds ranging from 85 to 95 miles per hour
- OBP:.500
- Slugging:.600 (minimum of two at bats per game)
- Slugging:. The classic Division I middle infield recruit can hit for a high average, steal a lot of bases, and occasionally hit for power
- However, this is not always the case.

Division 2 is the second division in the United States.

- 5’8″–6’2″ in height, 165–190 pounds in weight, with a time of 6.9 seconds in the 60-yard sprint or less. The speed of the ball on the infield is in the low 80s and above MPH from the shortstop. (minimum of two at bats each game)
- OBP:.550
- Slugging:.450
- Batting average:.550

Division 3 and the National Association of Intercollegiate Athletics

- Dimensions: 5’11”
- Weight: 170 lbs
- 60-yard sprint time: 7.0 or below
- Infield velocity: 78+ MPH from SS
- On-base percentage (OBP):.400
- Slugging percentage (SLG):.500

Junior college is a type of college that is designed for students who are in their first year of college.

- Height: 5’10”
- Weight: 165 lbs
- 60-yard dash: 7.1 seconds or less
- Infield velocity: upper 70s MPH from second base
- On-base percentage:.350
- Slugging percentage:.450

College coaches at the D1 level tend to concentrate their recruiting efforts on shortstops rather than players who are primarily second basemen when it comes to midfielders. Take a look at the video below to get advice on how to be recruited from former D1 baseball player and current NJCAA baseball coach Nelson Gord. Return to the top of the page

## What do college baseball scouts look for in a center fielder?

Division 1 is the most competitive division in the league.

- Height ranges from 5’9″ to 6’2″
- Weight ranges from 175 to 210 pounds. From the outfield, the infield is traveling at speeds of 87–95 MPH. 60-yard dash: less than 6.7 seconds
- From the outfield, the infield is traveling at speeds of 87–95 MPH. Slugging percentage:.600 (minimum of two at bats each game)
- On-base percentage:.500

Division 2 is the second division in the United States.

- Height: 5’11”
- Weight: 180 lbs
- 60-yard dash: less than 6.9 seconds
- OBP:.450
- SLG:.500 (minimum of two at bats per game)

Division 3 and the National Association of Intercollegiate Athletics

- Height: 5’11”
- Weight: 180 lbs
- 60-yard dash: 6.9 seconds or less
- OF velocity: 80+ miles per hour
- OBP:.400
- Slugging:.500

- Height: 5’10”
- Weight: 170 lbs
- 60-yard dash: 7.0 or less
- OF velocity: 78+ MPH
- OBP:.350
- Slugging:.450

Return to the top of the page

## What do college baseball scouts look for in a corner outfielder?

Division 1 is the most competitive division in the league.

- Height: 5’11”
- Weight: 180 lbs
- 60-yard dash: less than 6.8 seconds
- Out-of-bounds velocity: more than 87 miles per hour (as confirmed by an impartial source)
- Slugging percentages of at least 5 home runs as a high school junior and senior
- .750 (minimum of 2 at bats each game)
- On-base percentage of at least.500

Division 2 is the second division in the United States.

- Height: 5’11”
- Weight: 180 lbs
- 60-yard sprint time: less than 7.0 seconds The OF’s velocity is in the low 80s at the very least, with the ability to improve
- Slugging: I hit many home runs as a junior and senior in high school.

Division 3/National Association of Intercollegiate Athletics

- Height: 5’11”
- Weight: 180 lbs
- 60-yard dash: 6.9 or less
- OF velocity: 80+ MPH
- OB percent:.400
- Slugging percentage:.650

- Height: 5’10”
- Weight: 170 lbs
- 60-yard dash: 7.0 or less
- Out-of-bounds velocity: 78+ MPH

Return to the top of the page

## Statistics • D1Baseball

Player | Batting Average | |

1 | Hunter TabbSouthern | .700 |

2 | Pierce BennettWake Forest | .692 |

3 | Dawsen BachoSacramento State | .692 |

4 | J.T. JarrettNC State | .667 |

5 | Jayden ShertelUMBC | .667 |

Player | Home Runs | |

1 | Tommy WhiteNC State | 5 |

2 | Michael GoudeauTexas Southern | 4 |

3 | Hunter DorraughSan Jose State | 4 |

4 | Towns KingSamford | 4 |

5 | Mason HullMissouri State | 3 |

Player | Stolen Bases | |

1 | Johnathon ThomasTexas Southern | 14 |

2 | Tyrese ClayborneTexas Southern | 8 |

3 | Elijah NunezTCU | 6 |

4 | Justin CooperTexas Southern | 6 |

5 | Guy LipscombBelmont | 6 |

### National Pitching Leaders

Player | Wins | |

1 | Henrik ReinertsenCalifornia | 2 |

2 | Brock MyersTennessee Tech | 2 |

3 | Timmy WatkinsSamford | 2 |

4 | Evan KowalskiOral Roberts | 2 |

5 | Luke MatthewsPresbyterian | 2 |

Player | ERA | |

1 | Joseph GonzalezAuburn | 0.00 |

2 | Jacob WosinskiOakland | 0.00 |

3 | Tony RossiCharlotte | 0.00 |

4 | Jordan ArmstrongAuburn | 0.00 |

5 | Jared MathewsonUNC Greensboro | 0.00 |

Player | Strikeouts | |

1 | Sammy NateraNew Mexico State | 14 |

2 | Nate PetersonIllinois-Chicago | 13 |

3 | Thomas HarringtonCampbell | 13 |

4 | Kevin StevensUT Rio Grande Valley | 13 |

5 | Braxton DouthitLamar | 13 |

## OPS and OPS+

In baseball, On-base Plus Slugging (OPS) is exactly what it sounds like: it is the product of a player’s on-base percentage and their slugging % added together. Many sabermetricians dislike OPS because it regards OBP as being on par with SLG in terms of importance, despite the fact that OBP is nearly twice as essential as SLG in terms of influence on run scoring (x1.8 to be exact). In spite of this, OPS has importance as a measure since it is recognized and utilized more extensively than other, more accurate statistics, while simultaneously being a pretty accurate depiction of offensive output and effectiveness.

- On-base Plus Slugging Plus (OPS+), which has not gained as much widespread acceptance as OPS but is a more informative metric than OPS, can be found on baseball cards and broadcasts.
- A 100 OPS+ is considered league average, and each point over or below 100 OPS+ represents one percentage point above or below league average, respectively.
- Given that OPS+ takes into account league and park effects, it is conceivable to utilize OPS+ to compare players who have played on various clubs throughout time.
- If you have a strong desire to succeed, we propose that you replace OPS withwOBA and OPS+ withwRC+.
- On-base plus slugging:OPS = OBP + SLGI On-base plus slugging You can find detailed instructions on how to compute OBP and SLG separately here if you want a more technical understanding: In this equation, OBP = (H + BB + HBP) divided by (AB + BB + HBP + SF).
- Why OPS is important: A player’s ability to get on base and hit for extra bases is captured better by the OPS than other metrics like as batting average or RBI, which are used to measure other aspects of the player’s performance.
- With a few small exceptions, if you order batters by OPS, you are generally categorizing them based on their productivity to date, unless otherwise specified.

OBP is about twice as useful as SLG, which means that OPS overrates power hitters while underrating people with high OBP.

OPS has the advantage of being fairly simple to calculate in a pinch and being more well recognized, but there is really no reason to prefer OPS over wOBA if you have the option to choose between the two.

If you don’t have access to wOBA or wRC+, it’s a reasonable estimate if that’s all you have.

In 2015, A.900 OPS is a significant improvement over the previous year of 2000.

As a general rule, OPS requires a large sample size in order to be representative of genuine skill.

Always be certain that you understand the context and sample size involved while utilizing OPS.

Check out the FanGraphs leaderboards to discover what the league-average OPS has been for every year since 1901 up to the present. The average OPS+ for the league is always 100.

Rating | OPS |
---|---|

Excellent | 1.000 |

Great | 0.900 |

Above Average | 0.800 |

Average | 0.710 |

Below Average | 0.670 |

Poor | 0.600 |

Awful | 0.570 |

Keep in mind that, when evaluating a player’s offensive, OPS is a better number to utilize than batting average; nevertheless, OPS should always be used in conjunction with other statistics as well, such as slugging percentage and on-base percentage. It’s an excellent starting point for getting people to think about things other than typical statistics. If you have the option, utilize Weighted On-Base Average (wOBA) instead of On-Base Percentage (OPS). OPS treats both OBP and SLG equally, however wOBA takes into consideration the fact that OBP is really more useful than SLG.

Listed below are some further reading resources: FanGraphs provides a visual comparison of OPS and wOBA.

## How to Calculate OPS in Baseball

Baseball statistics have long been a significant aspect of the game. When talking about baseball and its many leagues, terms such as batting average, runs batted in, hits, runs, and more have become standard. However, as baseball has progressed throughout the years, the statistics have gotten very intricate. It might be difficult to keep up with the new-age language, which includes statistics such as on-base percentage (OBP), slugging percentage (SLG), and wins above replacement (WAR), among others.

Initially glanced at, it appears to be a difficult figure to compute and comprehend, however it can be simply broken down into a series of steps.

## 1. Understanding and Calculating On Base Percentage

On Base Percentage (also known as On Base Percentage or OBP) is a crucial statistic in baseball and the first important statistic required to comprehend On Base Percentage (also known as OPS). Quite literally, the On Base Percentage tracks how many times an individual player gets on base. In order to compute this, you tally up a player’s hits, walks, and times hit by a pitch, and then divide the total by the number of plate appearances the player has made (at bats plus walks plus hit by pitch plus sacrifice flies).

## 2. Understanding and Calculating Slugging Percentage

The slugging percentage, abbreviated as SLG, is the other important statistic in the calculation of the OPS. Although similar to calculating on-base percentage (OBP), SLG is used to assess the overall quality of hits made by a player rather than amount of base hits made.

It does this by giving a numerical value to each base (single = 1, double = 2, etc.) and assessing the type of hit a player receives when he smacks the ball. The formula for calculating SLG is Singles + Doubles x 2 + Triples x 3, + Home Runs x 4 divided by the number of at bats.

## 3. Calculating and Understanding OPS

So, now that we’ve learned how to compute OBP and SLG, it’s important to remember that OPS is basically On Base Percentage plus Slugging, which makes it much simpler to calculate. To compute on-base percentage and slugging % for a player, multiply their on-base percentage by their slugging percentage. For example, a player with an OBP of.280 and an SLG of.500 will have an OPS of.780 if he also has an OBP of.280 and an SLG of.500. This statistic practically reflects the best of both worlds between the two statistics because it evaluates both the amount of time a player spends on base and the quality of their hits.