How To Break In A Baseball Glove In One Day

How to Break in a Baseball Glove

The glove that a baseball or softball player wears has a unique meaning to him or her. The placement of every crease and seam has been accomplished by means of several catches, grabs, and snagging. A great deal of time and effort has gone into designing that mitt, and it all begins with the break-in period. Before playing, players of all skill levels should break in their gloves by rubbing them together. Breaking in your glove properly may assist to ensure that it is pleasant to wear and slides smoothly with your hand when you need it.

In addition to increasing cohesiveness, breaking in your glove will also assist to reduce any undesired stiffness or rigidity.

When it comes to breaking in your new baseball or softball glove, there are a variety of options.

Utilize these procedures to assist you in breaking in your mitt for a comfortable fit and feel.


Pour a tiny quantity of hot water (150 to 170 degrees Fahrenheit) over any areas of your new glove that you would want to be softer (for example, the thumb). It is not recommended to soften your glove in the microwave or with detergents, since this might cause harm to the leather of the glove. Use a tiny quantity of glove oil, applied with a sponge, to achieve the same results. Glove oil should never be applied directly to the glove. It has the potential to be too concentrated at the place of application, resulting in a wet and heavy patch.


Once the glove has been drenched with warm water or glove oil, begin bending the thumb and pinky back and forth toward and away from each other to begin breaking in the stiff regions of your mitt. Squeeze the index and middle fingers together. The rear fingers should be pushed down, and the palm liner should be squeezed. Pulling on the web top will allow it to extend a little. To ensure that your glove is totally dry, repeat the process six to eight times more.


With continued usage, your glove should begin to soften in the same way that other leather goods do. You may assist speed up this process by pounding the pocket where you would catch the ball with a wooden mallet or a 5-pound neoprene dumbbell to soften the glove. In addition, pound the web to produce a fold in the area where you want your glove to break. In addition to helping to create a good valley for the ball to fall into, it may also aid to smooth out any undesirable creases for a smooth pocket finish.

Pounding the pocket also helps the leather to adjust to your palm for the ultimate break-in experience by making it more flexible.


Placing a ball in the pocket of your glove and wrapping it with two or three rubber bands can keep it secure. The bands should be quite snug, but not too tight, and should overlap one another to make a “X” shape when they come together. Allow four to five hours for your glove to get set in this manner.

When your glove dries, this will aid in the formation of the desired shape and prevent the glove from reverting to its original shape. After you have removed the ball from the pocket, pound the pocket once again to work the pocket even more.


When it comes to breaking in a baseball or softball glove, the most enjoyable way is to simply throw it around as much as you possibly can. By playing catch in a series of rounds, your glove will gradually begin to conform to your hand, with the leather becoming looser with each catch. Playing catch on a consistent basis will be the most effective method of ensuring that your glove becomes used to your hand structure, as no amount of oil, cream, or pummeling therapy can compete with a good old toss when it comes to reproducing genuine game sensations.

In-store glove steaming is available to assist enhance the playability of your mitt in a matter of minutes.


Maintaining your glove in the house rather than the trunk of your car or garage can help it last longer and keep its shape in better shape. Do not forget to take good care of the leather on your gloves by putting a tiny quantity of oil or glove conditioning lotion to them on a regular basis throughout the season. Taking the time to treat your glove right before putting it away for the season is also a wise practice. BONUS PRO SUGGESTION: Conditioners and oils should be used sparingly. In fact, over-caring for your glove can be harmful, as the oils can make your glove heavier and even limit its lifespan due to the oils.

No shortcuts can be taken to having a properly broken-in softball or baseball glove, but by following these helpful guidelines and playing as many rounds of catch as possible, your new mitt should be ready to hit the field in no time!

Make sure to review our helpfulPro Tip’s Rundown on how to get a baseball glove that meets your playing demands and budget before making your purchase.

How to Break in a Baseball Glove (The Right Way) –

Investing in a high-quality baseball glove is one of the most essential decisions a baseball or softball player can make about their game. It may make a significant difference in your overall performance if you select the proper glove for your position and playing style. While no one glove can transform you into a great defender, selecting one that fits properly and feels comfortable may help you gain more confidence on the field and produce plays that are more clean and consistent in their execution.

Even if you choose a model that is somewhat below the “elite” level, you should expect to pay between $150 and $250 for a quality leather mitt.

One component of this is ensuring that it is properly broken in.

Unfortunately, there is a lot of disinformation out there about the appropriate and wrong procedures, and if you aren’t cautious, you might end up doing more harm than good.

Here, we’ll discuss how to properly break in a baseball glove and why many of the most popular approaches are really counter-productive.

How to Break in a Baseball or Softball Glove

Greetings and congratulations on your recent purchase! Premium leather gloves are pricey, but they demonstrate that you are dedicated to the game and are prepared to go to the next level. Top models such as the Wilson A-2000 and the Rawlings Heart of the Hideare expensive, but if you take good care of and preserve your new glove, it will be at your side for many seasons to come.

Why Do Baseball Gloves Need to be Broken In?

One of the characteristics that distinguish leather as a valued and flexible material is its long-term resilience. However, unused leather that has just been pulled off the production line is typically as rigid as a rock, and the leather used by baseball glove makers is no exception to this rule. Those of you who have ever attempted to catch a ball with a brand new glove are well aware of the difficulties involved. They’re nearly hard to close, and the ball bounces out as if it had been thrown against a wall of bricks.

The break-in phase might be anywhere from a few days to many weeks, depending on the type of leather used.

How to Break in a Baseball Glove – The Right Way

Nomar Garciaparra, a former Boston Red Sox shortstop, had one rule: no one else’s hand was permitted to be in his glove at any time. Nomar’s rule is one that is commonly observed among great baseball players. Why? Since leather expands and conforms to your hand and motions as you break in a glove, it becomes more comfortable and supportive. When you put on a glove, you want it to feel natural on your hand, as if it were an extension of your arm that you had completely forgotten was even there.

When you use the glove enough times, the glove will organically conform to your hand, creating a bespoke fit and a pocket that is tailored to your specific catching style.

In order to get the best-fitting, best-performing glove possible, you must put it through its paces by actually using it.

It toss, take ground balls, shag fly balls, and anytime you have the opportunity to catch a ball with your hand in a glove, do so.

How to Break in a Baseball Glove Fast

When it comes to breaking in a glove, a mix of warm water and manhandling is the most efficient method.

Shigeaki Aso, a glove expert for Wilson Sporting Goods and one of the world’s foremost authorities on the subject, explains the procedure in the video below. What you’ll need is the following:

  • A pail of hot water (not boiling)
  • A pair of rubber gloves a cup of anything
  • A softer surface (such as a cushion or a rug)
  • Glove mallet/glove hammer (optional).

However, it’s important to note that, despite Aso’s well-deserved reputation, there is considerable controversy about the effectiveness of his technique in general. Aso is a highly skilled leather craftsman who creates some of the best gloves available anywhere in the world. He’s well aware of what he’s doing. Using water to soften the leather makes it simpler to work with, but if the water is not applied appropriately, it might leave the leather dry and brittle. So, if you decide to go this route, make sure to follow the directions to the letter – and keep in mind that making a mistake might result in damage to your mitt.

  • Glove mallet from the Mizuno brand, with a rounded end.
  • Using this method, you may loosen up the leather and make it more pliable.
  • With the glove still slightly damp, you want to concentrate on applying as much pressure as possible to the region indicated by the yellow arrow in the illustration below.
  • It is at this point that the glove mallet is utilized.
  • Another fantastic approach to form the pocket from here is to place your hand in the glove and use the mallet to shape the pocket.

Other Tools and Methods

Steaming your glove is a simple, quick, and effective method of cleaning. The technique, on the other hand, has the potential to harm the leather’s fibers. It is for this reason that steaming will void Wilson’s one-year glove guarantee.) Using steam on your glove can soften it, but it will also decrease its durability. In addition, players frequently report that steamed leather fails to maintain its form, instead continuing to break in until it becomes almost too soft to handle. So, if you’re looking for a game-ready glove right now, this would be a good alternative.

Allowing Dick’s to steam your glove is the quickest and most convenient option.

  1. Glove conditioner will be applied by the technician, which will allow the pores on the leather to open up and soften throughout the steaming process. The technician will place the mitt in a glove steamer, which will soften the leather, allowing it to be more pliable. Taking the mitt out of the bag, the technician will begin striking it with a mallet, loosening up the crucial places. It is likely that this process will be repeated several times.

Glove Wrapping

A good supplemental approach to aid in the break-in of your glove is to wrap it around your hand. There are two schools of thought on how to wrap a gift: one believes that a ball should be placed in the pocket and the other believes that it should not.

The only one of those suggestions is right; you should always wrap your glove around a ball that is in the pocket. (You may find out more about why this is the case in the section on the mattress approach, which follows.) Wrapping your glove is a simple technique that takes only a few minutes.

  1. The glove is closed (with a ball in the pocket) by bringing the pinky and thumb together. Make a secure closure for the glove by wrapping it with thread, elastic, rubber bands, or anything else that will keep it in that closed position. Allow it to rest for a couple of days before unwrapping it and repeating the procedure
See also:  How To Ship A Baseball Bat

Wrapping the glove stretches the leather and retains it in place for a longer amount of time, making it simpler to deal with in the future.

Glove Conditioners and Oils

Conditioning and nourishing oils for gloves can be used both during and after the break-in process. The first rule of thumb when it comes to utilizing glove conditioners and oils is to only use items that have been approved by the manufacturer. Don’t apply Vaseline, petroleum jelly, chapstick, or olive oil on your glove since they will harm and/or saturate the leather, according to the manufacturer (leaving it greasy, heavy or dried out). The following are five of the most popular conditioners on the market.

  1. Nokona Classic Leather Glove Conditioner
  2. Mizuno Strong Oil Glove Conditioner
  3. Rawlings Glovolium Glove Treatment
  4. Wilson Pro Stock Glove Conditioner
  5. Wilson Pro Stock Mink Oil Paste
  6. Wilson Pro Stock Mink

It’s important to remember that a little goes a long way with oils and conditioners. For the most part, you’ll only need to apply a thin layer of coating and gently massage it in with a clean cloth. Essentially, the purpose of these items is to keep leather in good condition while also, in certain instances, softening it. Using too much can result in saturation, which can result in the glove becoming ruined. Another thing to consider is that, in most cases, you will not be required (or even desired) to soften your glove’s webbing, which is typically thinner than the glove’s body and should break in quite rapidly on its own.

The Wrong Way to Break in a Baseball Glove

We discussed a few alternative strategies for breaking in your new baseball glove in the section above. It’s time to go through some of the things you should certainly avoid doing (under any circumstances).

Don’t: Microwave or Bake It

Microwaves and ovens are only used for cooking food. Gloves are made of leather, and leather does not include any food ingredients. So let’s avoid using the glove in the microwave or the oven! Some people believe that baking leather in an oven softens it. That may be true at first since heat makes leather more pliable, but it is not always the case. Hot air, on the other hand, has a tendency to be dry — and this is particularly true of the hot air that comes out of an oven. When you bake a glove, the moisture in the leather is drawn out of the leather.

A Wilson A-2000 that had been abandoned in an automobile.

Don’t: Leave Your Glove in the Car

When you leave your car in the sun, it will become quite hot. As a matter of fact, they’re similar to mobile ovens. which has led some individuals to believe that placing an open glove on a hot dashboard could be a better option to microwaving or baking it. However, you’ll receive results that are similar to those displayed above: a glove that has become dried out and cannot be repaired using a glove conditioning solution

Don’t: Use Shaving Cream

Barbasol shaving cream, which may be used as a conditioner, is one of the most commonly recommended methods for breaking in a glove. Lanolin, a natural oil derived from sheep’s wool, was used in the manufacture of shaving cream back in the day. Lanolin, it turns out, is a fairly effective leather conditioner. However, lanolin is no longer found in virtually all shaving products nowadays. Barbasol shaving cream contains a trace quantity of alcohol, but not a significant amount. Every jar of shaving cream contains an inordinate amount of chemicals and artificial substances that were not intended for use on skin or in the treatment of leather.

It’s possible that you’ve already figured out that dryness is the adversary of a properly maintained glove.

The chemicals in shaving cream, just like heat, have the ability to draw moisture from leather. Besides that, some of the chemicals contain substances that can actually break down and weaken the fibers of leather, making it less durable.

Don’t: Put Your Glove Under a Mattress

Using the mattress approach, you may achieve a similar result to that of glove wrapping: by pressing the glove into a closed posture, you stretch the leather and make it malleable more rapidly than usual. The outcomes of these two techniques, on the other hand, are vastly different. The use of rubber bands or string to secure your glove helps you gently stretch the leather along the crease, resulting in a glove that folds properly. The mattress approach, on the other hand, will result in a glove that is flattened and like a leather pancake.

Putting your glove beneath the mattress can cause the heal (the firm leather bar at the base of the palm) to become unduly compressed, which is a critical component of what gives a glove its shape.

The converse is true: If you fold the heel, you’ll wind up with a loose mitt that you’ll have to squeeze hard in order to keep the ball from coming out.

Frequently Asked Questions

Here are some of the most often asked questions on how to break in baseball gloves, as well as the answers to those queries. What is the best way to break in a baseball glove overnight? Breaking in a baseball glove overnight is not only dangerous, but it may also be detrimental to its leather construction. In principle, submitting a glove to extremely high temperatures (such as an oven) or extremely high pressure (such as being driven over by a car) may soften it in that amount of time. That said, using such procedures will result in a dry, misshapen mitt that performs badly and is not very long lasting.

Is it possible to break in a baseball glove with shaving cream?

How to Break in a Baseball Glove Properly – Conclusion

As you begin to work on your new baseball glove, keep in mind that it will take some time for it to become comfortable. People are always eager to provide suggestions for ways to expedite the process, but such suggestions can sometimes cause more harm than good. Grabbing balls with a glove is the most effective approach to break it in quickly. Every alternative approach carries its own set of dangers and drawbacks, and it is best avoided if at all feasible. If you don’t require the glove to be game-ready right away, you can use it during warmups until it is ready to be used in the game.

If you need to move things forward quickly, catching balls launched by a pitching machine might be a fantastic approach to accomplish this goal quickly. Using oils and conditioners in moderation while caring for your mitt can keep it looking its best.

The Hitting Vault is the most popular, most trusted and highest rated online hitting community.

It was developed in order to teach athletes how to use their bodies in order to unlock their most powerful swing possible. Its purpose is to assist coaches in obtaining the best possible results from their players. Become a member and you’ll get access to over 200+ special videos for members, as well as step-by-step instructions, so you’ll know exactly what you need to do next to unleash your power at the plate. Today is the day to try it out and enjoy your first trial week for just $1. What is the number one power sapping factor for the average hitter?

How to Break In a Baseball Glove Overnight – Myths and Truths

It’s possible that this is your very first baseball recollection. A parent or someone you look up to offers you a glove and informs you that this glove is now yours to keep and use. But first and foremost, you must break it in. The term “breaking in” a baseball glove raises certain questions. What exactly are you expected to do? What is the best way to tell whether it has been broken into? And what kind of tools should you utilize to get it started? There are many different kinds of myths out there, and it may be difficult to distinguish between myths and realities.


A mallet is used.

Now, let’s separate the myths from the realities and figure out what it means to properly break in a baseball glove.

Why Break in a Baseball Glove at All?

When it comes to breaking in a baseball glove, two characteristics are important: flexibility and malleability. When you get a new baseball glove, it is likely to feel a little stiff at first. The stiffer it is, the less control you have over the movement of the glove, and vice versa. This impairs your ability to make an effective catching maneuver. Each catch will be more controlled if you can get the glove to adapt to your motions as much as possible throughout the catch. Stiffness is the enemy in this situation.

A baseball glove must be able to accommodate two different things.

Every outfielder also understands the importance of having a glove that fits well in your hand.

Breaking in a Baseball Glove: Myths and Truths

When you purchase a new baseball glove, you will immediately note that it exhibits all of the characteristics of new-baseball-glove syndrome. It’s stiff, it’s not form-fitting, and it’s not even really comfy right away, to put it mildly. Myth: You can’t break in a baseball glove easily. We’ll give this one partial credit. What people mean to say is that it’s tough to break in a glove rapidly. But it can be done. There are stories out there of catchers striving to make their glove more bendable during the two hour journey to a game.

The truth is that a glove that has been broken in is more comfortable.

It’s like opening up a pair of new sneakers.

They are even capable of causing blisters.

This is a subject that is up for dispute. Using a glove mallet or glove hammer, softening the glove with hot water, and essentially pounding up the baseball glove until it’s closer to the shape you need, for example, is recommended by a leather craftsman. Glove steaming may be recommended by others.

How Do You Break in a Baseball Glove Overnight?

First and foremost, you can do a great deal to break in a baseball glove without having to play catch a thousand times in a row every day. In fact, it’s probably in your best interests to do so. In an ideal situation, you’ll have several weeks to break in a baseball glove. While wearing your new glove, you may notice something odd about it, such as the way it fits your pinky or the way the pocket of the glove isn’t quite set. You can do a lot to break it in overnight by putting it on and off several times.

One method for breaking in a baseball glove quickly

Make sure you have the proper equipment. It will be required to use a bucket of hot water. A cup, a soft place on which to work, and either a glove mallet or a glove hammer to assist in breaking it in would also be beneficial. Make use of the hot water. Pouring it over the glove (as opposed to soaking it in, which would over-saturate the glove) would just soften the surface, allowing you to deal with it more easily and effectively. Use the “hinge” of the glove to complete your task. The region of the glove where the padding beneath your thumb is located is critical in this situation because if this area is not flexible, it will be difficult to properly wrap the glove around a soccer ball.

This approach does not ensure that you will be able to race with a glove that is properly fitted to you.

Can You Use Shaving Cream to Break In a Baseball Glove?

You can, and in certain cases, it may be better to other ways due to the fact that shaving cream will not do as much damage. In terms of how “broken in” your glove is, though, it won’t have a significant impact. Adding another ingredient here will very certainly improve your chances of getting more of the broken-in effect you desire. Some people, for example, may let their baseball glove sit with a softball inside it to assist decide the form of their baseball glove. Others, however, are not in agreement with this strategy, mostly because they are attempting to catch baseballs, not softballs.

See also:  How To Watch Baseball Playoffs

It takes a lot of pressure and a lot of time to achieve the “lived-in” look you want.

Can You Use Vaseline to Break In a Baseball Glove?

Baseball players are fully aware of this since it is one of those “old- timer’s” tactics that they have heard about before. The concept is straightforward: applying Vaseline to the outside of your glove will assist to soften the leather, making it more malleable and accepting to fresh feedback. However, when a manufacturer provides explicit suggestions about what you should use, this becomes an issue. When this occurs, do not apply Vaseline. In certain cases, you may discover that it reacts with the glove in a way that is detrimental to the glove’s long-term longevity.

  • Vaseline used shortly before a game, for example, will only slightly soften the glove while making it slippery, according to the manufacturer.
  • Keep in mind that Vaseline is considered a “conditioner.” It is not enough to just apply Vaseline to the affected area.
  • The term “conditioner” refers to something that helps soften your hair in the same way that a conditioner could.
  • However, in order to take use of this pliability, you’ll need to provide the baseball glove with extra feedback (for example, by inserting a baseball inside it).
  • It should only be used in little quantities.
  • Only when you want to construct the glove later on should you condition the glove.
  • Using tactics such as wrapping a ball inside the glove and tying rubber bands around it can help you make the most of the time you don’t have to use it, which will save you money in the long run.

You should also avoid over-applying a conditioner if you’re currently using one. This implies that you should avoid using Vaseline on a regular basis, and if you do, avoid using so much that it totally saturates the glove.

Can You Use Olive Oil to Break In a Baseball Glove?

Olive oil is frequently lumped in with Vaseline as a moisturizer. Some ball players’ “home cures” say that you should break in your glove with olive oil, and that it may also be used as a glove conditioner. You can discover these suggestions on the internet. However, you’ll want to make certain that you follow the instructions provided by the glove maker first. Otherwise, handle olive oil in the same manner as you would Vaseline, as described above. That entails being aware of how to use it properly, using it as a “conditioner” rather than a particular breaking-in product, and otherwise minimizing your exposure to it.

Should You Steam Your Baseball Glove?

Sure! This is an excellent approach for causing the least amount of harm to the glove while simultaneously increasing its flexibility for working with. When it comes to glove steaming, one method is to use the conditioner that was advised by the glove maker. Afterwards, you steam the glove until it is soft enough to work with without tearing it. You’ll next use a glove mallet to break in the glove, making it much simpler to fold over a ball when it comes your way in the future.

What Oil Can I Use to Break In a Baseball Glove?

Glove oil made by the manufacturer is generally the finest option. Manufacturers do not provide these recommendations at random; they do it in order to assist you in avoiding damage to the glove. After all, it is their desire that you will appreciate the goods and that you would submit a nice review for them on Amazon. Sure, you can learn everything about microwaving and utilizing warm water for a variety of at-home cures from books and the internet. Furthermore, several oils, such as olive oil, are frequently advised as conditioners for the hair.

There is no alternative for the passage of time.

How Many Gloves Do MLB Players Go Through in a Year?

It’s difficult to get exact data on this, but on average, major leaguers will receive two gloves each spring training. One of these gloves is the “main,” which means it’s the one that will be broken in over the offseason. The second one serves as a backup in the event that the first one fails. Some major leaguers may go through even more of these, breaking in new gloves using gimmicks like petroleum jelly or a wooden mallet, as well as other minor leaguers. Everyone appears to have their own set of tastes.

It’s important to have trust in your glove when a big-time hit comes off of a baseball bat, or whether you’re practicing outfielding against a hitter on a pitching machine.

A glove that has been properly softened and broken in is vital for every position in baseball, whether you’re playing shortstop or first base.

Similar Posts

What is the number of stitches on a baseball? What is the purpose of baseball players chewing gum? Can umpires be thrown out of the game? Baseball Has Unwritten Rules Baseball has unwritten rules. Using Mud to Rub What is the Infield Fly Rule, and how does it work? What is the purpose of athletes wearing eye black? How to Become a Major League Baseball Umpire What does a Minor League Baseball player make in a year? What exactly is a Balk? Assignment has been assigned to you. In baseball, what exactly is a putout?

Break in a baseball glove fast: The art of breaking in your mitt.

Hello there, my friends. Sign up for my email and you’ll receive a FREE Practice Checklist in return. What is the proper way to break in a baseball glove? Allow me to list the ways. Baseball players have experimented with hundreds of different methods of breaking in a new baseball glove. Various techniques of breaking in a baseball glove have been tried and tested with varying degrees of effectiveness. Some natural solutions have shown to be more effective than others. For the most part, breaking in a baseball glove is up to the individual who owns the glove.

Top 10 Ways for Breaking Ina Baseball Glove

Everyone has his or her own method of breaking his or her glovein, and there is no one way to go about it in general. Take, for example, my top 10 strategies for breaking in a new baseball glove, which I’ll share with you. These techniques of breaking in a glove are only samples, and some of them I would never undertake myself, but they have been tried by others before me. From worst to first, here are my top ten attempts at preparing your glove for game use. 10. Drive over the baseball glove with the automobile to make a point.

  1. Maintaining the shape of the glove in the manner in which you want it is somewhat out the window, therefore there may be other better options.
  2. Use a hammer, rubber mallet, or a baseball bat to pound the glove into submission.
  3. 8.
  4. Adding baseball glove oil to your glove is one of the most ineffective techniques of baseball glove care and break-in.
  5. Even worse, the glove leather softens excessively, causing the leather to tear at the laces before they have a chance to do so.
  6. Never use glove oil to break in a new pair of leather gloves.
  7. 7.
  8. I’ve seen players take their costly baseball gloves and soak them in a bath of water overnight to preserve them.
  9. After that, they let the glove to dry for a couple of days.

Upon drying, it is expected that the glove would retain its shape, which was achieved by molding and tying the glove prior to soaking. When I have my glove around water, I feel like a cat. I just don’t believe gloves and water are a good combination.

More Breaking In a Baseball Mitt

For a few minutes, heat up the glove in the microwave. Water, ovens, and gloves are mentioned once again, and that seems a little unsafe to me. According to legend, the glove leather softens when exposed to heat. Artificial glove break-in methods are not for me, but you are welcome to experiment with them if you are OK with a little risk and uncertainty. 5. Smear shaving cream onto the palm of the glove. The effect will be minimal, and it will not be as awful as rubbing baseball gloves with oil on your gloves.

  1. 4.
  2. During a two-hour bus ride to a minor league baseball game, I witnessed my former coach, Doug Camilli, transport a player’s brand new stiff quality leather catchers glove.
  3. The catchers mitt was handled on and off by Doug during the two-hour bus journey, and it was determined that the glove was flexible enough to be used in the game.
  4. Wow.
  5. This strategy, in some form or another, has been used in baseball for many generations.
  6. When the glove is sleeping at night, this is a good thing.
  7. Turn the glove inside out and press it against your hand.
  8. You should see the look on my face when I grab a brand new baseball glove from a baseball player and poke and prod it till it is completely inside out.
  9. When you put it back together the next day, it is much more malleable and workable, and you didn’t have to do anything to make it that way.
  10. Curling the fingers and bending them in into the pocket is not advantageous for catching the baseball because it reduces the opening of the pocket to an unusable size.

1 Best Method for Glove Break-In

1 Best Method for Glove Break-In: USE IT. This is the most important tip. Return from Breaking in a Baseball Glove to the Baseball Gloves page. Return to the Baseball Equipment page. Home Page for Youth Baseball

Baseball Impossible: Player Development Make-OverBuild Your Own Culture of Player DevelopmentIncrease Your Players FUN-Level6-DVD Video Set Building YourCompletePlayer Development SystemClick to OrderAudio CD Format Click Here

6-DVD Box Set for Coaching Yes, Dave, I want to assist my players in having a good time during the game.Coachinglittle league baseball Youth baseball may be a lot of fun or it can be a difficult endeavor. In their right mind, who would want to go back to the same old monotonous baseball practice year after year and never develop their baseball skills? and then get shouted at by other people? Baseball Instructional Videos: Take a look at more than 6 hours of video tutorials on coaching approach (style), philosophy, and my own unique player development method.

Youth baseball careers are brief, so let’s make the most of the time we have with our youngsters. What do baseball players actually want to get out of their sport? I’m interested in learning more about the Six DVD Player Development System.

How to Break In a Glove

Step I: Prepare warm water (warm, not boiling) and pour it into the glove’s pocket or palm with the finger side up to ensure that water does not get inside the finger stalls. The water will make it simpler to stretch the leather, which will allow you to more efficiently form the glove as a result. The glove should be placed such that the rear fingers are towards your chest and pointing up. Step II: Grab it between your thumb and pinky and squeeze, jerking each side back and forth a few times.

  1. Stretch the glove out by grasping it by the tops of the pinky and the thumb of your right hand.
  2. If you don’t want your finger top lace to be too loose, don’t strain on it too much at this phase.
  3. Step IV: Before commencing this process, consider the position you play and if you like a deep or shallow pocket for your cards.
  4. Finish by closing your glove and striking it with your mallet around the W emblem on the thumb side of the glove, moving it back and forth.
  5. (Optional) Fill the web top with your fingers and squeeze for five to six seconds to form a ‘S’ shape with your fingers.
  6. This aids in loosening the web top lacing, making it even simpler for your glove to shut exactly the way you want it to be closed.
  7. Would you want to watch the Aso glove break-in procedure in action?

Breaking In A Glove

New baseball gloves are frequently stiff and not yet ready to be used in a game setting. Even gloves that have been customized to your playing style, such as custom baseball gloves or custom softball gloves, must be broken in before they can be used on the field for the first time. Many baseball players are curious in how to properly break in a baseball glove, as well as which ways should be avoided. We’ll guide you through best practices, things to bear in mind, things to avoid, and even show you what the experts do in the sections that follow.

See also:  What Famous Baseball Player Did Marilyn Monroe Marry

Traditional Methods

When breaking in a new baseball or softball glove, purists adhere to established procedures. They just play catch with their gloves for a number of hours each day for several days or weeks until the glove is properly broken in. Despite the fact that this procedure takes longer, it naturally breaks in your glove better than any other approach, and other methods can speed up the process if you want to rush it.

Overall, no matter what you do to break in your glove, the more you can play catch and practice with your mitt, the faster it will break in and become more comfortable.

Baseball Glove Oils and Conditioners

When thinking about how to break in a baseball glove, one of the best places to start is by softly applying a thin coat of glove oil to the palm of the hand. Glove oil keeps the leather “alive,” while also providing a softening condition and helping to protect the leather from gaining weight. Apply about a dime-sized amount of glove oil to a sponge or cloth, and then use the sponge or cloth to apply the oil to the regions of the glove that are currently stiff, as shown in the illustration. Begin with the palm and work your way up to the breakpoint of the glove and finally the web of the glove.

  • Make care to massage the glove oil into the leather in an equal fashion.
  • Instead, apply the glove oil to the glove’s interior.
  • Failure to do so may lead them to begin to fracture and the webbing to become loose, resulting in them being unstable.
  • When it comes to deciding what sort of oil to put on your glove, the majority of individuals (even professionals) go for shaving cream.
  • It is recommended that you continue to use glove oils and conditioners once your glove has been broken in throughout the season.
  • Oil should be applied three to four times throughout the season to get the desired results.

Work the Rigid Parts

When it comes to physically exercising a glove, many players are likewise confused of how to properly break it in properly. One of the most effective methods is to stretch the tight regions and work the leather to aid in the breaking up of the leather. The thumb and pinky are two of the areas that are the most constricting. It is beneficial to draw these sections of the glove towards and away from one another. This aids in the loosening of the binding and leather, allowing the glove to squeeze and catch the ball more effectively.

It is important to vary the amount of manipulation you do with the fingers depending on how tight you wish your finger laces to be.

Soften and Shape the Glove

When it comes to softening and molding a glove, wooden mallets are frequently utilized. Pounding the pocket can aid in the formation of a ball shape, allowing the glove to get more used to gripping a ball.

Pluck the glove in various places to loosen the leather and get it ready for play. Make sure you place a ball in the pocket to evaluate the size and form before continuing to soften and shape the leather using a wooden mallet to achieve the best results.

Important Points to Remember

  • The use of too much glove conditioner/oil can harm and decrease the life of a fresh glove. During this time, in a warm environment, let the glove oil to seep into the leather. Play catch every day until the glove is ready to be used in a game. Use only a little amount of the glove oil
  • You may always add more afterwards. Apply glove oil to your glove towards the conclusion of the season to prevent it from becoming brittle. Maintain the form of your glove by storing it in a dry area with a ball in the pocket. Use of neat’s foot oil, linseed oil, or silicon-type spray is not recommended. It is likely that this will cause leather to dry, stiffen, and grow heavy as a result of the closure of the pores. When it comes to breaking in a glove, there is no shortcut
  • Playing catch is still the best method. To avoid overconcentration of the glove oil at the place of application, first apply it to a piece of cloth and then apply to the glove
  • The most difficult leather to break in will almost certainly be a high-quality leather. It is not recommended to break in your baseball or softball glove in the oven or microwave. This will cause irreparable harm to your glove. Do not leave your glove outdoors or in your car while you attempt to break it in
  • Instead, go to a safe location.

Another Method

When it comes to learning how to break in a baseball glove, many individuals prefer to consult with the experts. A professional baseball player will occasionally break in a glove in a manner that is contrary to the recommendations of the glove maker. In order to prevent your gloves from wearing out faster, glove manufacturers do not recommend this practice. Due to the fact that professional baseball players typically receive their gloves free of charge, they are less concerned with lifespan and more concerned with a short break-in time.

  1. First, they soak their glove in a pail of extremely hot water for 1-2 minutes, then remove it from the water.
  2. Infielders often have one baseball in their pocket, whereas outfielders typically have two baseballs in their pocket.
  3. Following that, they will place their glove in a dryer to dry it while the baseball(s) are still in their pocket.
  4. After that, they will untie the glove and work in shaving cream containing lanolin, or glove oil, into the glove.
  5. In order to utilize glove oil, apply it to a sponge or a cloth first, then use the sponge or cloth to apply the oil to the portions of the glove that are currently stiff.
  6. Then, using the glove oil, apply it to all other sections of the glove, including the whole inside, to help moisturize and preserve it.
  7. It is now time to begin pummeling the glove with a baseball bat.
  8. Breakpoints should be pummeled in order to make the glove loosen up even more.
  9. Keep in mind that using this approach will reduce the lifespan of your glove.

Shop for Your Next Glove

* Do you need assistance in locating the ideal baseball glove or softball glove? Please contact one of our qualified Glove Experts through email at [email protected], Live Chat, or toll-free phone number: 1-866-321-4568!

How to Break in a Baseball Glove

Image courtesy of rmccurdyb Baseball season is about to begin, and it’s time to start thinking about what you’ll wear on the beer league softball team. One of my favorite childhood memories is breaking in a new baseball glove, which was one of my first purchases. The last time I saw my father, he was sharing all of his secrets for getting a good, broken-in glove that would make Willie Mayes envious. There are almost as many different ways to break in a glove as there are guys who have participated in the sport over the years.

I’ve included some ideas and suggestions on how to break in a baseball glove that I’ve seen and heard throughout the course of my baseball playing career. To select the glove that feels perfect on your hand and has a pocket that appears to magnetically draw the ball, try them all on.

Watch the Video

The leather on brand new baseball gloves is rather stiff, so the first thing you should do is soften it up a little bit. Here are a few examples on how to go about it: Simply put, utilize it. The most effective technique to soften a baseball glove is to get it out in the field and allow it to see some play. Find a friend and go to a park to play catch with them. It should be lovely and soft after several weeks of fielding grounders, shagging fly balls, and just plain old playing catch with your baseball glove.

  • Continue reading if your team has a game on Monday and you need to break a glove in as soon as possible.
  • There is a lot of debate among baseball players over whether or not it is OK to use oils and other lubricants to soften up a baseball glove before a game.
  • I’ve always used some form of softening chemical to make my gloves softer.
  • To soften your baseball glove by massaging it like a Swedish massage, you must first pick what kind of lubricant you will apply to it.
  • Baby oil, Vaseline, shaving cream, saddle soap, and special glove oils are all recommended.

What you choose to utilize is entirely a question of personal taste. When I was younger, I would always shave with a can of my father’s Barbasol shaving cream. It’s inexpensive, and it’s effective. Investigate a variety of drugs to see which ones perform best for you. Whatever you choose to use, be sure you don’t go excessive. It is not necessary to soak your glove in baby oil in order for it to become beautiful and silky. Simply apply a drizzle and work it into the leather to achieve the desired effect.

  • It’s time to beat it up.
  • To begin, take a hammer, preferably a ball-peen hammer, and begin banging on the outside and inside of the baseball glove, working your way around the glove.
  • This is a way that I personally believe is superior.
  • Bring it to a boil.
  • Once again, the use of heat to soften a baseball glove is a contentious matter.
  • Some players would sooner have their pinkie amputated than allow this to happen.
  • Yes.

I heard of a player who heated up his brand new baseball gloves in the microwave to make them warm and soft before using them.

It’s in the oven.

Once the oven has reached the preset temperature, switch it off.

Place your glove on a baking sheet and bake it for 10 to 15 minutes, depending on how thick your glove is.

Leave the glove in the trunk of the automobile.

So, while it’s illegal to leave a baby in a car, it’s a good idea to leave your glove in the car to avoid getting burned. On a hot day, pull your car over to the side of the road and leave your glove inside. After a night’s sleep, your glove should feel pleasant and soft the next morning.

Form the pocket

It is the space between your thumb and forefinger that constitutes the glove’s pocket. Catching baseballs is considerably simpler when the pocket is properly formed. For the second time, simply playing catch for a few weeks might assist to establish the pocket. However, if you don’t have the luxury of time, you’ll have to resort to deception. Keep a ball in your pocket at all times. The tried-and-true method entails stuffing a baseball into the glove’s pocket, tying it up with twine, and leaving it there overnight.

On the event that you opt to tie your glove down with twine, make sure not to knot it too tightly or you’ll end up with some nasty wrinkles in your glove.

As a child, this was my preferred method of accomplishing the task.

Beating on the chest on a regular basis.

This is a pleasant hobby to engage in when you need a break from your workday.

Form the glove

Throughout the entire process, I would always bend and mold my glove to my liking and satisfaction. With this in mind, we strive to make the glove as pleasant as possible to wear. There isn’t really a right or wrong way to go about it. Continue to bend it until it fits like, well, a glove, and that’s it. Tags:Sports

Leave a Reply

Your email address will not be published.