What Does Ops Stand For In Major League Baseball

What Does OPS Mean in Baseball – What is a Good OPS?

Mr. Halladay, a former pitcher who had previously played for the Toronto Blue Jays and the Philadelphia Phillies, was killed on Tuesday when his jet crashed into the Gulf of Mexico off the coast of Florida. He had reached the age of forty. The incident was reported to the Pasco County Sheriff’s Office by a homeowner at 12:06 p.m., and when authorities got on the site, they discovered the plane, an ICON A5 registered to Halladay, upside down in shallow water. Sherriff Chris Nocco said that Halladay had been the only person on board the plane after four hours of search and recovery work, but that the cause of the incident was still under investigation.

Halladay’s family and friends have been extended sympathies by the plane’s maker in a statement released on Tuesday.

A statement from the Philadelphia Phillies read, “We are still in shock over the devastating news of Roy Halladay’s untimely demise.” The message was uploaded to Twitter by the Phillies.

Known for his longevity and command, Halladay was a right-handed pitcher who was a two-time Cy Young Award winner and eight-time All-Star.

2010 was a watershed year for Halladay’s professional life.

As a result of the no-hitter, Dusty Baker, the Reds’ manager at that time and a long-time figure in the sport dating back to the late 1960s, declared, “That was the best-pitched game I’ve seen in as long as I’ve been going to the playoffs and World Series.” Pedro Martinez, a three-time Cy Young Award winner whose prime overlapped with Halladay’s, posted one of the most heartfelt words of grief on social media.

  • Sadly, back problems forced Halladay to retire early from baseball.
  • Considering Halladay’s retirement date, he will not be eligible for election to the Baseball Hall of Fame until 2019, although he will have a strong case due to his dominance throughout his best seasons.
  • Nine players ahead of him have not yet been inducted into the Hall of Fame, but more than 30 pitchers behind him have already been inducted into the Hall of Fame.
  • Halladay spoke about how strange it was not to be able to play baseball shortly after his retirement.
  • I feel like I should be working out, running, or doing something else,” Halladay said.
  • “Initially, there’s a little bit of fear, and then it kind of sinks in: ‘O.K., that’s exactly true.’ My retirement is effective immediately.’ The sensation is in fact rather tranquil.”.
  • Flying was something Halladay knew well because his father had been a pilot.
  • His wife, Brandy, has been a constant source of contention for Halladay.
  • It has long been common among athletes to fly tiny planes, and the Major League Baseball has lost a number of players in similar accidents.
  • In addition, Cory Lidle, a former teammate of Halladay’s on the 2003 Blue Jays, died in 2006 when a Cirrus SR20 he was flying with a co-pilot crashed into an apartment building on Manhattan’s Upper East Side, killing both of them.

According to Nocco, “You wouldn’t know what Roy did because Roy wouldn’t tell you what he did,” he explained. “And that’s the legacy of a wonderful man,” says the author. Halladay is survived by his wife and their two boys, Ryan and Braden, who were his pride and joy.

How is OPS Calculated?

OPS is one of those statistics that must be interpreted in conjunction with other data in order to make sense. To compute On-base plus slugging, we’ll need two statistics: first, the number of times a player has reached base.

  • Percentage of time spent on base (OBP). It is a cold, hard statistic that measures how many times a player gets on base by any method in comparison to the total number of at-bats they have had throughout their career. It makes no difference how a player gets on base in the OBP game. Were they tainted with something? Walked? Did they make contact? It everything contributes to their overall batting average (OBP)
  • Slugging average (SLG). Unlike other stats, this one is a system that measures the quality of a player’s strikes. The batting average of a baseball player, for example, does not tell you how often they hit the ball
  • It just tells you how often they scored a hit. SLG includes the quality of those hits into the calculation by including the amount of bases reached as a component of the equation. An individual player might theoretically have a slugging average of 4.000, which would result in an optimum ratio of home runs to at-bats. That is to say, if a player only has one at-bat and hits a home run, his slugging average will be 4.000 points higher than normal. An SLG of 1.000 indicates that a single was hit in a single at-bat, and so on.

Keep in mind that there are some uncommon instances (such as sacrifice flies) that do not count toward at-bats and, as a result, have no meaningful influence on either of these statistics. The terms OBP and SLG are certainly familiar to you; OBP is a rate measure, and SLG is a rate and quality metric. When you combine the two metrics, on-base plus slugging, you get a more complete picture of a player’s ability to smash the ball hard. What is the formula for calculating it? Simply add the two numbers together.

What is a Good OPS in Baseball?

For fans of Major League Baseball, it might be difficult to make sense of how OPS works on sometimes. What does it have to say about the look of the plates? What is the overall quality of the ballpark in which they are playing during the season? What is the total number of bases they have amassed? To obtain a real understanding of what a good OPS is, it’s helpful to first establish a standard of comparison. Here are a few of the top OPS in Major League Baseball history:

  • With an OPS of 1.1636, Babe Ruth is the all-time leader
  • Mike Trout is among the all-time OPS greats who are still active, with a career average of around 1.0000
  • Barry Bonds ranks 4th on the list as of 2020, with an OPS of approximately 1.05
  • Lou Gehrig ranks third with an OPS of 1.07
  • And Ted Williams of the Boston Red Sox is the only other player outside of Babe Ruth who has an OPS of 1.1 or higher over his This is among players who have accumulated at least 3,000 at-bats.

Of course, this only provides us only one end of the range to work with. What about the overall average of the league? A look at the data for Major League Baseball reveals that the league average in on-base plus slugging is often between 0.700 and 0.800.

What is the Highest OPS in Baseball History?

Already, we’ve shown you the player who has the greatest careerOPS, Babe Ruth of the New York Yankees, in our previous post. His 1.1636 OPS over that many at-bats may never be surpassed, putting him in the running for the title of greatest hitter of all time. However, this is merely one method of looking at the stats. Season-to-season comparisons of metrics such as on-base percentage (OPS) are important because they reveal exactly how spectacularly certain players have reached the pinnacle of their careers.

  • Babe Ruth, 1920: 1.3791
  • Barry Bonds, 2001: 1.3785
  • Babe Ruth, 1921: 1.3586
  • Babe Ruth, 1923: 1.3089
  • Babe Ruth, 2004: 1.4217
  • Babe Ruth, 2002: 1.3807
  • Bab

Eventually, Ted Williams enters the picture, having posted the 7th-best offensive season in baseball history. When Rogers Hornsby appears on the list, it is at the thirteenth position that a fourth player is included.

What about High OPS Seasons in Recent Years?

  • Juan Soto of the Washington Nationals had the best OPS in 2020, batting 1.1846 with a 1.1846 on-base percentage. That was good enough for the 25th greatest OPS season in baseball history
  • In 2019, Christian Yelich of the Milwaukee Brewers hit 1.1001, which was strong enough for a season in the top 100 of all-time OPS rankings

Are there Better Stats than OPS?

A hitter’s talent can be evaluated by adding up his or her slugging % or slugging average with his or her on-base percentage, which some may argue is a rudimentary method of doing so. However, it is possible that there is more to it than you realize. After all, on-base percentage (OBP) includes at-bats, walks, sacrifice flies, and the number of times a batter is hit by a pitch. Overall, the OPS statistic takes a variety of factors into consideration, including at-bats and total bases. Hits, walks, HBP, and even sacrifice fly are all accounted for in the overall calculation.

Optimal team performance (OPS) is popular because when calculated for an entire team, it has a strong correlation with how many runs the team has scored. This is why many people consider it to be an effective tool to evaluate a batter’s offensive output on a consistent basis.

What about OPS+?

The OPS+ statistic, which takes this statistic and “normalizes” it across the league, is also available. A player’s OPS+ takes into account external factors such as the ballpark in which he or she was hitting. It is calculated such that an OPS of 100 represents the league average, which provides people with an immediate understanding of how a player’s offensive productivity compares to the rest of the team. As a result, the statistics of a Cubs player may differ from those of a Dodgers player, who in turn may differ from the statistics of a Cardinals player or a White Sox player.

When a player is free agent, OPS+ is important because he or she may benefit from primarily playing in a smaller ballpark where it is easier to hit home runs, which can increase his or her value.

Conclusion

The on-base average and slugging percentage, when combined, can provide useful information on a player’s offensive performance in the big leagues. However, like with any other sabermetrics in baseball, it’s not always simple to quantify everything without actually seeing it firsthand in action.

Similar Posts

In baseball, what exactly is a putout? What is Batter’s Eye? What Does the Abbreviation QAB Mean in Baseball? Baseball GM (General Manager of Baseball) What is the definition of a hold in baseball? Bases are being stolen in baseball. In baseball, what exactly is a quality start? In baseball, there is a magic number. What is the role of a baseball manager? Baseball with a Can of Corn What Is the Meaning of Batting Average? What is a Knuckleball and how does it work? Coach on the Baseball Bench What is a No-Hitter, exactly?

Baseball Doubleheader in the horizon Baseball is a hit-and-run sport.

What is a Spitball Pitch, and how does it work?

On-base plus slugging – Wikipedia

A player’s on-base plus slugging (OPS) % is derived as the sum of his on-base percentage and slugging percentage, and it is a sabermetric baseball statistic. The ability of a player to get on base as well as hit for power, two crucial offensive qualities, are both illustrated in this illustration. Among Major League Baseball, a batter with an OPS of.800 or greater is considered to be in the highest tier of hitters. Typically, the league leader in OPS will have a score that is close to, and occasionally even above, 1.000.

Equation

Where OBP represents on-base percentage and SLG represents slugging average, we have the following equation. These averages have been established. – the numerator “H + BB +HBP” essentially means “number of trips to first base at the very least” – the denominator “AB + BB + SF +HBP” basically means “total plate appearances,” but does not include sacrifice bunts. A hitter is not granted a “AB” despite the fact that he steps to the plate (BB or HBP) or puts the ball into play and is ruled out, but the action allows a run to score (as in the SF scenario) even though he has made a trip to the plate.

To compute a batter’s total number of trips to the plate, the four counts (AB + BB + SF + HBP) must be used in conjunction. andwhere:

  • H stands for hits
  • BB stands for bases on balls
  • HBP stands for times hit by pitch
  • AB stands for at bats
  • SF stands for sacrifice fly
  • TB stands for total bases.

OPS may be expressed as follows in a single equation:

History

The Hidden Game of Baseball, written by John Thorn and Pete Palmer in 1984, was the first book to make on-base plus slugging popular. The New York Times then began publishing the names of the top performers in this statistic in its weekly “By the Numbers” box, a feature that ran for four years and was widely adopted. Peter Gammons, a baseball journalist, popularized and evangelized the statistic, which was then picked up by other writers and announcers. Its popularity grew over time, and by 2004, it was featured on baseball cards produced by Topps Baseball Cards.

See also:  How Much Is A Mlb Baseball Worth

Examples include Thorn’sTotal Baseballencyclopedia and theStrat-O-Matic Computer Baseballgame, both of which contained manufacturing information in their early editions.

The availability of its components, OBP and SLG, as well as the fact that team OPS corresponds highly with the number of runs scored, contributed to the rise in popularity of OPS.

An OPS scale

Bill James, in his essay titled “The 96 Families of Hitters,” classifies hitters into seven separate groups based on their offensive power:

Category Classification OPS range
A Great .9000 and higher
B Very good .8334 to.8999
C Above average .7667 to.8333
D Average .7000 to.7666
E Below average .6334 to.6999
F Poor .5667 to.6333
G Very poor .5666 and lower

This basically converts the ordinal scale into a seven-point ordinal scale for OPS. It is possible to provide a subjective reference for OPS numbers by substituting quality labels for the A–G categories, such as excellent (A), very good (B), good (C), average (D), fair (E), bad (F), and very poor (G).

Leaders

With at least 3,000 plate appearances through August 5, 2020, the top 10 Major League Baseball players in terms of lifetime OPS were as follows:

  1. Babe Ruth has a 1.1636 rating
  2. Ted Williams has a 1.1155 rating
  3. Lou Gehrig has a 1.0798 rating
  4. Barry Bonds has a 1.0512 rating
  5. Jimmie Foxx has a 1.0376 rating
  6. Hank Greenberg has a 1.0169 rating
  7. Rogers Hornsby has a 1.0103 rating
  8. Mike Trout has a 1.0009 rating
  9. Manny Ramirez has a 0.9823 rating
  10. Mark McGwire has a 0.9823

The top four hitters were all left-handed, which was a rarity. Jimmie Foxx has the best career on-base percentage (OPS) of any right-handed batter in baseball history. The following are the best 10 single-season performances in Major League Baseball (all by left-handed hitters):

  1. 1.4217 for Barry Bonds in 2004
  2. 1.3807 for Barry Bonds in 2002
  3. 1.3791 for Babe Ruth in 1920
  4. 1.3785 for Barry Bonds in 2001
  5. Babe Ruth in 1921
  6. Babe Ruth in 1923
  7. 1.2875 for Ted Williams in 1941
  8. 1.2778 for Barry Bonds in 2003
  9. Babe Ruth in 1927
  10. Ted Williams in 1957
  11. 1.2582 for Babe Ruth in 1927
  12. 1.2566 for Ted

During the 1925 season, Rogers Hornsby batted 1.2449, which ranked him 13th on the all-time list of single-season marks for right-handed hitters. For right-handed pitchers since 1935, Mark McGwire’s 1.2224 OPS in 1998 ranks 16th all-time and is the greatest single-season mark for a right-hander.

Adjusted OPS (OPS+)

OPS+, or modified OPS, is a metric that is closely connected to OPS. OPS+ is an adjusted OPS that takes into account the park and league in which the player played, but does not take into account fielding position. The league average is defined as having an OPS+ of 100 points. An OPS+ of 150 or above is exceptional, and a score of 125 or higher is very good, but an OPS+ of 75 or below is mediocre. OPS+ may be calculated using the following equation:where *lgOBP is the league’s park adjusted OBP (excluding pitchers hitting) and *lgSLG is the league’s park adjusted SLG (excluding pitchers hitting).

Due to the additive nature of the two components of OPS+, for example a player with an OBP and SLG that are both 50 percent over average in both categories will have an OPS+ of 200 (twice the league average OPS+), while having an OPS that is only 50 percent above the league average.

As an approximate (but not accurate) estimate, a player with an OPS+ of 150 generates 50 percent more runs in a given series of plate appearances than a player with an OPS+ of 100 throughout the course of a similar set of plate appearances (though see clarification above, under “History”).

Leaders in OPS+

Through the completion of the 2019 season, the following players ranked in the top twenty in their respective career OPS+ rankings (minimum 3,000 plate appearances):

  1. Babe Ruth has 206 hits
  2. Ted Williams has 190
  3. Barry Bonds has 182
  4. Lou Gehrig has 179
  5. Mike Trout has 176
  6. Rogers Hornsby has 175
  7. Mickey Mantle has 172
  8. Dan Brouthers has 170
  9. Joe Jackson has 170
  10. Ty Cobb has 168
  11. Pete Browning has 163
  12. Jim Foxx has 163
  13. Mark McGwire has 163
  14. Dave Orr has 162
  15. Stan Musial has 159
  16. Hank Greenberg

These are the only players on this list who are exclusively right-handed batters: Browning, Hornsby, Foxx, Trout, McGwire, Allen, Mays, and Thomas are the only players on this list who are exclusively right-handed batters. Mantle is the only player in the group who can transition from one position to another. The following were the best single-season performances:

  1. Barry Bonds has 268 hits in 2002
  2. Barry Bonds has 263 hits in 2004
  3. Barry Bonds has 259 hits in 2001
  4. Fred Dunlap has 258 hits in 1884 *
  5. Babe Ruth has 256 hits in 1920
  6. Babe Ruth has 239 hits in 1921
  7. Babe Ruth has 239 hits in 1923
  8. Ted Williams has 235 hits in 1941
  9. Ted Williams has 233 hits in 1957
  10. Ross Barnes has 231 hits in 1876 **
  11. Barry Bonds has 231 hits in 2003

* – Fred Dunlap’s remarkable 1884 season took place in the Union Association, which some baseball experts believe is not a legitimate major league in the traditional sense. It is possible that Ross Barnes was helped by a rule that declared a bunt fair if it rolled in fair territory for the first time. When this regulation was lifted, he did not perform nearly as well as he had previously, but injuries may have played a major role in this, since his fielding numbers also fell. If Dunlap’s and Barnes’ seasons were to be removed from the list, two more Ruth seasons (1926 and 1927) would be added to the list.

Barnes, the lone right-handed hitter on the list, would also be eliminated as a result of this.

Criticism

Despite the fact that it is a straightforward computation, OPS is a contentious statistic. On-base percentage and slugging percentage are both taken into consideration when calculating OPS. On-base %, on the other hand, is a greater predictor of run production. Linear weights are used to construct statistics such as thewOBA, which capitalizes on this distinction. Furthermore, the components of OPS are not always equal (for example, league-average slugging percentages are frequently 75–100 points higher than league-average on-base percentages).

See also

  1. For further information, visit the Wayback Machine
  2. John Thorn and Pete Palmer, “The Hidden Game of Baseball,” on pages 69-70
  3. Alan Schwarz, “The Numbers Game,” on pages 165-233
  4. Mr. James and Mr. Bill The 96 Hitter Families have been identified. The Bill James Gold Mine, 2009, p.24
  5. “Career LeadersRecords for OPS”.Baseball-Reference.com. RetrievedJuly 26,2019
  6. “Single-Season Records for OPS”.Baseball-Reference.com. RetrievedJuly 26,2019
  7. “Career LeadersRecords for Adjusted OPS+”.Baseball-Reference.com. RetrievedJuly 26,2019
  8. “Single- Michael Lewis is a writer who lives in the United Kingdom (203). Moneyball: The Art of Winning an Unfair Game
  9. “2019 Major League Baseball Standard Batting”.Baseball-Reference.com

References

  • John Thorn and Pete Palmer are co-authors of this work (1984). Baseball’s “Secret Game” is a little known fact. Schwarz, Alan
  • Doubleday & Company, ISBN 0-385-18283-X
  • Doubleday & Company, ISBN 0-385-18283-X (2004). The Game of Numbers. Books published by Thomas Dunne Books (ISBN 0-312-32222-4)

List of Major League Baseball career OPS leaders – Wikipedia

Babe Ruth is the all-time leader in on-base percentage (OPS). A player’s on-base percentage and slugging average are added together to form on-base plus slugging (OPS), a sabermetric baseball statistic. The ability of a player to get on base as well as hit for power, two crucial offensive qualities, are both illustrated in this illustration. The following is a list of the top 100 Major League Baseball players in terms of career on-base percentage (OPS) who have made at least 3,000 plate appearances.

Other than Ted Williams (1.1155), Lou Gehrig (1.0798), Oscar Charleston (1.0632), Barry Bonds (1.0512), Jimmie Foxx (1.0376), Turkey Stearnes (1.0340), Mule Suttles (1.0176), Hank Greenberg (1.0169), Roger Hornsby (1.0103), and Mike Trout (1.0019), there are no other players with a career OPS greater than 1.0000 in baseball.

Key

Rank Rank amongst leaders in career OPS.A blank field indicates a tie.
Player Name of the player.
OPS Total career OPS.
* Denotes elected toNational Baseball Hall of Fame.
Bold Denotes active player.

List

Mike Trout is the active leader and ranks 11th all-time in career on-base percentage (OPS).

Rank Player OPS
1 Babe Ruth* 1.1636
2 Ted Williams* 1.1155
3 Lou Gehrig* 1.0798
4 Oscar Charleston* 1.0632
5 Barry Bonds 1.0512
6 Jimmie Foxx* 1.0376
7 Turkey Stearnes* 1.0340
8 Mule Suttles* 1.0276
9 Hank Greenberg* 1.0169
10 Rogers Hornsby* 1.0103
11 Mike Trout 1.0019
12 Manny Ramírez .9960
13 Mark McGwire .9823
14 Mickey Mantle* .9773
15 Joe DiMaggio* .9771
16 Stan Musial* .9757
17 Frank Thomas* .9740
18 Larry Walker* .9654
19 Jud Wilson* .9618
20 Johnny Mize* .9591
21 Jim Thome* .9560
22 Todd Helton .9531
23 Jeff Bagwell* .9480
24 Mel Ott* .9471
25 Ralph Kiner* .9459
26 Willie Wells* .9455
27 Lefty O’Doul .9451
28 Ty Cobb* .9446
29 Dan Brouthers* .9435
30 Lance Berkman .9429
31 Willie Mays* .9414
32 Shoeless Joe Jackson .9401
33 Hack Wilson* .9399
34 Joey Votto .9367
35 Albert Belle .9333
Edgar Martínez* .9333
37 Vladimir Guerrero* .9312
38 David Ortiz* .9310
39 Chipper Jones* .9304
40 Harry Heilmann* .9300
41 Alex Rodriguez .9299
42 Carlos Delgado .9293
43 Hank Aaron* .9285
44 Earl Averill* .9283
Tris Speaker* .9283
46 Charlie Keller .9276
47 Frank Robinson* .9259
48 Ken Williams .9238
49 Chuck Klein* .9218
50 Mike Piazza* .9217
Rank Player OPS
51 Miguel Cabrera .9196
52 Duke Snider* .9194
53 Albert Pujols .9187
54 Ed Delahanty* .9165
55 Jason Giambi .9157
56 Bryce Harper .9156
57 Babe Herman .9148
58 Al Simmons* .9147
59 Dick Allen .9117
60 Paul Goldschmidt .9106
61 Mike Schmidt* .9075
62 Ken Griffey Jr.* .9073
63 Gary Sheffield .9070
64 Mo Vaughn .9058
65 Juan González .9039
66 Jim Edmonds .9030
67 Brian Giles .9022
68 Bill Joyce .9020
69 Giancarlo Stanton .9012
70 Bob Johnson .8987
Bill Terry* .8987
72 Chick Hafey* .8980
73 Mickey Cochrane* .8970
74 Freddie Freeman .8925
Hal Trosky .8925
76 Ryan Braun .8906
77 Mookie Betts .8903
78 Sam Thompson* .8896
79 Willie McCovey* .8891
80 Matt Holliday .8889
81 Willie Stargell* .8887
82 Billy Hamilton* .8875
83 Prince Fielder .8873
84 Jake Stenzel .8868
85 Goose Goslin* .8867
86 Jackie Robinson* .8865
87 Fred McGriff .8860
88 Larry Doby* .8857
89 Eddie Mathews* .8855
90 Rafael Palmeiro .8852
91 Moisés Alou .8550
92 Harmon Killebrew* .8842
93 Charlie Gehringer* .8841
94 Tim Salmon .8836
95 Roger Connor* .8828
96 George Selkirk .8826
97 Nomar Garciaparra .8821
98 J. D. Martinez .8813
99 Wally Berger .8805
100 Kris Bryant .8803

Notes

  1. Inactive players include those who have declared their retirement or who have not participated in a complete season of competition

External links

  • The following are the “Career LeadersRecords for On-Base Plus Slugging.” Baseball-Reference.com

On Base Plus Slugging (OPS) All Time Leaders on Baseball Almanac

When Branch Rickey and Allan Roth invented the on base percentage statistic in the 1950s, they were looking for a way to track the number of times a player reached any base. The sacrifice fly designation was not included in the initial version, but when it was formally adopted in 1984, it was included using the procedure outlined in the preceding section. Later, Slugging Average was established, and the two were merged to form On Base Plus Slugging, which stands for On Base plus Slugging. The player must have played a minimum of 1,000 career games in order to be included on this list of the one-thousand greatest on base plus slugging leaders.

  1. “Similar to a dog who has never been given table scraps.
  2. I’m pretty curious.
  3. I’m hoping to be able to do so this year, and I’m hoping it will be possible.
  4. I have set a one-year goal for myself.” The Baseball Digest published an article by Todd Helton (May 2004) Babe Ruth owns the record for most wins in the American League, and Manny Ramirez is the only current player who “appears” to be in with a chance.
  5. Perhaps the 1.000 OPS Club should be established by Baseball Almanac as a new “club” inside the organization.

What do you think of the on-base plus slugging percentage? Like this one, do you find it interesting to argue and debunk complicated statistics like this one? Bring your friends and family to join us onBaseball Fever, where we have a forum dedicated to the discussion of SABRMetric statistics.

On-base plus slugging

On-base plus slugging (sometimes known as on-base percentage and slugging percentage) is a baseball statistic that is computed as the sum of a player’s on-base percentage and slugging percentage. This method is excellent for determining a player’s offensive worth since it considers both the ability to get on base and the ability to hit for power, which are two crucial hitting talents, and it is simple to use. In Major League Baseball, a player with an OPS of.900 or more is considered to be in the highest tier of offensive skill.

See also:  When Is The Sec Baseball Tournament

Formula

Where OBP represents on-base percentage and SLG represents slugging percentage, we have the following fundamental formula: These percentages are defined as follows and in which locations:

  • The letters H, BB, and HBP stand for hits, bases on balls, and times hit by pitch respectively. The letters AB stand for at bats, SF stands for sacrifice fly, and TB stands for total bases.

Because the denominators of OBP and SLG are different, it is feasible to rewrite the calculation for OPS using a common denominator in order to simplify the expression. Mathematics says that this statement is the same as the simple sum of OBP and SLG, which is as follows:

Interpretation of OPS

It should be emphasized that, in contrast to many other statistics, a player’s OPS does not have a straightforward intrinsic meaning, despite the fact that it is valuable as a comparing measure. One flaw with OPS is that it gives equal weight to both on-base average and slugging percentage, despite the fact that on-base average is more closely associated with run production. This flaw is exacerbated by the fact that the component portions of OPS are not normally close to equal in terms of numerical value (league-average slugging percentages are usually 75-100 points higher than league-average on-base percentages, while league-leading slugging percentages are often 200-300 points higher than league-leading on-base percentages).

Inconsistencies between published OPSes and the sum of on-base average and slugging percentage are due to rounding mistakes in the calculations.

History

The Hidden Game of Baseball, written by John Thorn and Pete Palmer in 1984, was the first book to make the concept of on-base plus slugging prominent. The New York Times then began publishing the names of the top performers in this statistic in its weekly “By the Numbers” box, a feature that ran for four years and garnered widespread attention. The statistics were popularized by baseball journalist Peter Gammons, who utilized them and spread the word about them to other writers and announcers.

Leaders

The Major League Baseballplayers with a lifetime on-base percentage greater than 1.000 are as follows (through 2005, active players are highlighted in bold):

  1. Babe Ruth has a 1.1636 rating
  2. Ted Williams has a 1.1155 rating
  3. Lou Gehrig has a 1.0798 rating
  4. Barry Bonds has a 1.0533 rating
  5. Albert Pujols has a 1.0490 rating
  6. Todd Helton has a 1.0404 rating
  7. Hank Greenberg has a 1.0169 rating
  8. Rogers Hornsby has a 1.0103 rating
  9. Manny Ramirez has a 1.0076 rating
  10. Babe Ruth has a 1.16

Albert Pujols has the best career on-base percentage (OPS) of any right-handed batter in baseball history.

The following are the best 10 single-season performances in Major League Baseball (all by left-handed hitters):

  1. 1.4217 for Barry Bonds in 2004
  2. 1.3807 for Barry Bonds in 2002
  3. 1.3791 for Babe Ruth in 1920
  4. 1.3785 for Barry Bonds in 2001
  5. Babe Ruth in 1921
  6. Babe Ruth in 1923
  7. 1.2874 for Ted Williams in 1941
  8. 1.2778 for Barry Bonds in 2003
  9. Babe Ruth in 1927
  10. Ted Williams in 1957
  11. 1.2582 for Babe Ruth in 1927
  12. 1.2566 for Ted

Rogers Hornsby set the record for the greatest single-season batting average for a right-handed batter in 1925 with a 1.2449 mark (13th on the all-time list). Since 1925, Mark McGwire has had the greatest single-season OPS for a right-hander, with a 1.2224 mark in 1998.

Adjusted OPS (OPS+)

OPS+, or Adjusted OPS, is a metric that is closely connected to OPS. OPS+ is an adjusted OPS that takes into account the park and league in which the player played, but does not take into account fielding position. The league average is defined as having an OPS+ of 100 points. An OPS+ of 150 or greater is considered exceptional, indicating that the player’s overall OPS was 50 percent better than the national average after adjusting for park.

Leaders in OPS+

According to lifetime leaders in OPS+ (minimum 3000 plate appearances, current players in bold), the following players were the best through 2005:

  1. Babe Ruth has 207 hits
  2. Ted Williams has 190
  3. Barry Bonds has 184
  4. Lou Gehrig has 179
  5. Rogers Hornsby has 175
  6. Mickey Mantle has 172
  7. Dan Brouthers has 170
  8. Joe Jackson has 170
  9. Ty Cobb has 167
  10. And the list goes on.

The following were the best single-season performances:

  1. Barry Bonds has 275 hits in 2002
  2. Barry Bonds has 262 hits in 2001
  3. Barry Bonds has 260 hits in 2004
  4. Babe Ruth has 256 hits in 1920
  5. Fred Dunlap has 250 hits in 1884
  6. Babe Ruth has 239 hits in 1921
  7. Babe Ruth has 239 hits in 1923
  8. Ted Williams has 235 hits in 1941
  9. Ted Williams has 233 hits in 1957
  10. Ross Barnes has 231 hits in 1876
  11. Barry Bonds has 231 hits in 2003
  12. Barry Bonds

See also

  • Sabermetrics, on-base percentage, slugging percentage, and other metrics

Notes

  • John Thorn and Pete Palmer are co-authors of this work (1984). Baseball’s “Secret Game” is a little known fact. ISBN 0-385-18283-X
  • Alan Schwarz, Doubleday & Company, ISBN 0-385-18283-X (2004). The Game of Numbers. Thomas Dunne Books (ISBN 0-312-32222-4)
  • Thomas Dunne Books (ISBN 0-312-32222-4)

How to Calculate OPS in Baseball

Baseball statistics have long been a significant aspect of the game. When talking about baseball and its many leagues, terms such as batting average, runs batted in, hits, runs, and more have become standard. However, as baseball has progressed throughout the years, the statistics have gotten very intricate. It might be difficult to keep up with the new-age language, which includes statistics such as on-base percentage (OBP), slugging percentage (SLG), and wins above replacement (WAR), among others.

Initially glanced at, it appears to be a difficult figure to compute and comprehend, however it can be simply broken down into a series of steps.

1. Understanding and Calculating On Base Percentage

On Base Percentage (also known as On Base Percentage or OBP) is a crucial statistic in baseball and the first important statistic required to comprehend On Base Percentage (also known as OPS). Quite literally, the On Base Percentage tracks how many times an individual player gets on base. In order to compute this, you tally up a player’s hits, walks, and times hit by a pitch, and then divide the total by the number of plate appearances the player has made (at bats plus walks plus hit by pitch plus sacrifice flies).

2. Understanding and Calculating Slugging Percentage

The slugging percentage, abbreviated as SLG, is the other important statistic in the calculation of the OPS. Although similar to calculating on-base percentage (OBP), SLG is used to assess the overall quality of hits made by a player rather than amount of base hits made. It does this by giving a numerical value to each base (single = 1, double = 2, etc.) and assessing the type of hit a player receives when he smacks the ball. The formula for calculating SLG is Singles + Doubles x 2 + Triples x 3, + Home Runs x 4 divided by the number of at bats.

3. Calculating and Understanding OPS

So, now that we’ve learned how to compute OBP and SLG, it’s important to remember that OPS is basically On Base Percentage plus Slugging, which makes it much simpler to calculate. To compute on-base percentage and slugging % for a player, multiply their on-base percentage by their slugging percentage. For example, a player with an OBP of.280 and an SLG of.500 will have an OPS of.780 if he also has an OBP of.280 and an SLG of.500. This statistic practically reflects the best of both worlds between the two statistics because it evaluates both the amount of time a player spends on base and the quality of their hits.

The on-base percentage (OPS) is one of several complex baseball statistics, but it is by far the most straightforward for the ordinary baseball fan to comprehend.

What Is OPS in Baseball? Well, It Measures…

There are several approaches of evaluating baseball players, as well as numerous schools of thought on the most effective method of doing so. The earned run average (ERA) of a pitcher is widely considered to be the most reliable conventional statistic for determining his or her performance. Ops, on the other hand, has become a common measure for evaluating hitters in order to quantify their overall effectiveness. As a result, what exactly is OPS in baseball? On-base plus slugging (also known as OPS) is a statistic that attempts to assess a hitter’s overall effectiveness by combining two figures that reflect how well he is at reaching base and hitting for power: on-base percentage and slugging percentage.

In the meanwhile, let’s get down to business and answer the burning question.

What Is a Batter’s OPS?

In addition to On-Base, On-Base Plus The slugging percentage of a player is the sum of the player’s on-base percentage and slugging percentage. The on-base percentage (OPS) of a player demonstrates his or her ability to reach base and hit for power. On-base Plus is a slang term for Slugging percentage, often known as On-base percentage (OBP), is a combination of a batter’s On-base percentage (OBP) and Slugging percentage (SP) (SLG). The stat was created to analyze a batter’s ability to reach base and hit for power, which are the two key tasks that are regarded to be the most significant for hitters in baseball at the time of its creation.

You may calculate an OPS by adding these two values together, and voilà, the league OPS for 2019 was.758.

These prices, on the other hand, will alter over time as more and more people join the club.

Because a batter’s OPS tends to hold up better over time than counting figures, it may be used to evaluate batters even when comparing two players who have a significant difference in playing time.

How Do You Calculate OPS?

As we previously discussed, On-Base Plus is a type of military base. Slugging percentage, often known as on-base percentage and slugging percentage, is the sum of a player’s on-base percentage and slugging percentage. Put another way, you can compute an OPS by simply putting the two numbers together. The on-base percentage (OPS) of a hitter cannot be calculated, however, without these data. Because the complete OPS calculation is lengthy and difficult to compute on its own, it is preferable to calculate OBP and SLG separately and then combine them.

  1. In order to do so, sum up all of the hits, walks, and hit by pitches, then divide the total by the number of at-bats plus walks, sacrifice flies, and hit by pitches to get the on-base percentage.
  2. As a consequence, the calculation for OBP looks somewhat like this: At bats + walks + hit by pitch / (at bats + walks + hit by pitch + sacrifice flies) = On Base Percentage (OBP).
  3. Simply combine the two figures together to obtain the overall probability of success (OPS) for each situation.
  4. Using the on-base percentage calculation, the values for hits (30), walks (10), and HBPs (5) total up to 45 when multiplied together.
  5. The hitter’s on-base percentage is calculated by dividing 45 by 120, which equals.375.
  6. On the batting average side, the total bases from singles (15), doubles (10), triples (15), and home runs (20) add up to a total of a.600 slugging percentage.

For the purposes of illustration, the entire equation is written as follows: With all of that work spread out in front of you, it’s usually better to compute the two figures individually in order to keep everything a bit more organized.

Why Is OPS a Good Stat?

On-base Plus Slugging is one metric that has remained mostly concealed in plain sight throughout history and has just lately been recognized as being significant. In the world of so-called “advanced” metrics, on-base percentage (OPS) is one of the simplest to compute and utilize. It is comprised of the two values created by the two most significant talents for hitters: reaching base and hitting for power. Because of these two elements, on-field performance (OPS) is a simple metric for fans to locate, compute, and understand.

  • OPS, on the other hand, is by no means impenetrable.
  • According to theSporting News’ evaluation of on-base percentage (OPS), David Ortiz topped all of Major League Baseball with a 1.021 OPS in 2016, yet in 2000, same score would have matched him for 16th place in the league.
  • Because OPS is sensitive to changes in ballpark dimensions and league-wide adjustments, it is not the be-all and end-all metric.
  • This statistic is far more sophisticated, since it normalizes a player’s OPS based on league and park considerations, with 100 serving as a reference point for comparison.

What Is a Good OPS in Baseball?

According to what we discussed previously, OPS standards can shift over time as leagues and ballparks evolve. But there are still broad numbers that are deemed to be excellent or harmful in some way, shape or form. At any point in time in history, an OPS of over.800 has been deemed good, with an OPS of over.900 considered very good, and an OPS of 1.000 or greater considered extraordinary. On the other hand, an OPS of less than 700 is regarded bad, and anything less than 600 is considered extremely poor.

See also:  What Does Rd Mean In Baseball

When Did OPS Become a Stat in Baseball?

On-base Plus is made up of several components. Slugging (both on-base percentage and slugging percentage) has been around for a very long time. Branch Rickey was a pioneer in the development of the on-base percentage statistic in the 1940s and 1950s, and he was credited with inventing the concept. A metric known as “Extra Base Power” was also established by him, and he even reasoned that the two statistics might be combined to determine an individual batter’s total performance. Apparently, Rickey was decades ahead of his time in terms of thinking.

However, it wasn’t until the rise of sabermetrics in the late 1990s and early 2000s that baseball began to take the overall OPS (as well as its components) seriously.

The on-base percentage (OPS) is not regarded an official statistic by Major League Baseball, despite the fact that it is well known and highly accepted today.

After reading this, the next time you see a batter’s OPS, you will have a better understanding of whether you should be optimistic about him or if you should be concerned.

Highest Career OPS

Babe Ruth, who is in the Hall of Fame, holds the record for the best career On-base Plus Slugging percentage with a 1.164 OPS throughout his 22-year professional baseball career. Seven batters have concluded their careers with an OPS greater than 1.000, with Mike Trout now straddling the line between the two categories.

Highest Single Season OPS

Barry Bonds owns the single-season record for the greatest On-Base Plus Slugging percentage (1.422) with a mind-boggling 1.422 in 2004. He also established an MLB record with an on-base percentage of.609 and a slugging percentage of.812, both of which were the highest ever recorded.

What Is Batting Average?

The batting average demonstrates a player’s ability to put the ball in play and advance to the next base. The batting average of a hitter is derived by dividing the total number of hits he has received by the total number of at-bats he has had. It is important in measuring a player’s performance at the bat, but it does not take into consideration walks, sacrifices, and other factors.

Related Articles

  • What is the definition of a Designated Hitter in baseball? What is the definition of MVR in baseball? A Comprehensive Guide to the Rule
  • What Is the Meaning of WAR in Baseball? The Complete Guide to Getting Started
  • What is the definition of WHIP in baseball
  • In baseball, the term “left on base” (LOB) refers to the number of runners who have been left on base.

What does OPS stand for?

When it comes to baseball statistics, the ability to get on base and hit for power is referred to as the ability to get on base. Simply combining a player’s OBP and SLG results in the calculation of this statistic. The player’s overall offensive rating (OPR) is represented by the number you get. An OPS of.9000 or greater is excellent, and it is often held by the league’s top scorer. Barry Bonds, with a 1.4217 OPS in 2004, has the greatest single-season OPS mark in baseball history. Babe Ruth holds the record for the best all-time OPS with a 1.1636.

Example

“The fact that no one on our squad has an OPS of.7000 or above is beyond comprehension to me. Yeah, we’re a bunch of jerks.”

Related Slang

OBP On-base Percentage
avg Batting average
ERA Earned run average
RBI Runs batted in
HR Home run
Cycle Single, double, triple, and home run
MLB Major League Baseball
AB At bat

Usage

The most recent update was made on October 22, 2014.

OPS definition

This article provides an explanation of what the abbreviation “OPS” stands for. The Slangit team has authored and collated the definition, example, and related words given above. If you have any questions, please contact us. We are regularly adding new slang phrases, acronyms, and abbreviations to our database to keep it up to date. Please let us know if you have any suggestions for new terms or updates to current ones.

MLB Baseball Abbreviations Legend

MLB Abbreviations and Symbols

Heading Explanation Position Explanation
W / L Wins / Losses C Catcher
ATS Record Against The Spread 1B First Base
Slug Slugging Percentage 2B Second Base
Ho Home record 3B Third Base
Aw Away Record SS Short Stop
O/U Over/Under Record LF Left Field
AF Average Runs For CF Center Field
AA Average Runs Against RF Right Field
BA Batting Average DH Designated Hitter
SLG Slugging Percentage SP Starting Pitcher
HR Home Runs For RP Relief Pitcher
ERA Earned Run Average
OBP On Base Percentage
Home-Away Home Score – Away Score
H Starter Home Starter in that particular game
A Starter Away Starter in that particular game
LOB:R Left On Base to Runs ratio
OPS Slugging Percentage + On Base Percentage
AVG Batting Average for that game
Starter Team’s Starter for that game
IP Innings the starter pitched
Opp Starter Innings the starter pitched
H Hits Allowed by the starter
R Runs Allowed by the starter
ER Earned Runs Allowed by the starter
SO Strikeouts by the starter
BB Base on Balls allowed by the starter
PIT Total Pitches by the starter
P/IP Pitches divided by the number of Innings Pitched
G/F Number of Ground Ball outs divided by the Fly Ball outs
OBA Opposition Batting Average
WHIP Walks and Hits per Inning Pitched
GB:FB Ground Ball to Fly Ball Ratio
SB Stolen Bases
CS Caught Stealing
SB% Stolen Base Percentage
QS% Quality Start Percentage
TWL Team Win – Team Loss
W/L% Winning Percentage
vs. R vs. Right-handed Pitchers
vs. L vs. Left-handed Pitchers
Start Starters
Rel Relievers
R/9 Runs per nine innings
K Strikeouts
Doub Doubles
Trip Triples
$ Units Won or Lost
Line Line for the game
$ Won Units Won
$ Loss Units Lost

What Does Ops Mean In Baseball? Details Explained

The most recent update was made on July 3, 2021 by Percentage that is correct! Ops adds the on-base percentage and slugging percentage together to come out with a value that identifies them as one. The Ops can combine how well a batter can hit for average and power with how well he can hit for a good strikeout rate. It is also employed in the examination of pitchers. When this is done, it is referred as as Ops against.

The on-base percentage (sometimes known as the slugging percentage) is a sabermetric statistic in baseball that is used to measure a player’s overall performance. The ability of a runner to get on base as well as the ability to hit the ball with power are both portrayed in this illustration.

Ops Scale

Categories Classifications Ops Range
A Great Higher than.9000
B Very good Ranging from.8334 to.8999
C Above average Ranging from.7667 to.8333
D Average Ranging from.7000 to.7666
E Below average Ranging from.6334 to.6999
F Poor .5667 to.6333
G Very poor Lower than.5666

This table separates the Ops categories into seven groups on a seven-point ordinal scale. Quality labels such as excellent(A), very good(B), above average(C), average(D), below average(E), poor(F), extremely poor(G) and poor(H) might be replaced with more descriptive ones (G). All of these categories contribute to the creation of a subjective reference for operational values.

Ops- Meaning

First and foremost, the abbreviation ‘Ops’ refers to On-Base percentage plus slugging performance. The Ops statistic is derived from the sabermetric movement, which began several decades ago and is still in use today. It is used to capture the value of a batter using a straightforward heuristic.

Calculations

You must have deduced from the name and meaning of Ops that obtaining the Ops is the result of multiplying two separate values together. Both of these metrics are: Ops= On-base percentage (OBP) + Slugging percentage (SLP). Of course, the two figures that are being put together to form the Ops are generated in the following ways: On-base percentage (OBP) is calculated as follows: (hits + walks + hits-by-pitch) / (at-bats + walks + hits-by-pitch + sacrifice flies) x 100. In this equation, Slugging Percentage(SLP)=/AB.

History

We’ll start with the history of OBP and then go on to SLP because these two components are what make up the Ops. When Branch Rickey was establishing the Brooklyn Dodgers into a National League juggernaut in the 1940s or 1950s, he established the Organization of Baseball Prospects (OBP). The second factor is referred to as the slugging percentage (SLG). We’ll get back to you on this later. SLG has been in use since the 1800s, according to prominent major league baseball historian John Thorn, who claims that it was first used as an official MLB statistic in 1923 before becoming an official MLB statistic in 1923.

The concept of combining two separate averages in order to obtain a more accurate measure was both reasonable and excessive.

Why Should I Use Ops Stats?

The on-base percentage plus the slugging percentage is a standard measure that is simple to understand and use. Because it calculates based on the two most crucial jobs of a batter, which are getting on base and having the ability to hit the ball, Ops is considered to be beneficial. While Ops is a fantastic tool, it is lacking in several areas, such as league-wide offense, which changes on a regular basis. As an example, David Ortiz had the greatest Ops of the season last year with 1.021, which was the best in the league.

Another area in which Ops fails is that it does not take into consideration park variables.

The park factors are not taken into consideration by the Ops. It fails to recognize that when a player plays on his home field, he is more likely to perform well and enhance his stats. In the pitcher’s park, though, he does not perform as effectively as he does in his own backyard.

According To Ops Record, Which Pitcher Has The Fastest Throw Of All Time?

Take into consideration the fact that a quick fastball is a lot faster than it used to be. Aroldis Chapman holds the record for throwing the quickest fastball ever recorded in big league baseball history. On September 24, 2010, he set a new world speed record with a throw that reached 105.1 miles per hour. 105.8 miles per hour is the speed at which this pitch was recorded. Chapman’s pitch has grown by about a mile per hour throughout the course of his career. A pitch that was previously recorded at 105MPH may now be observed at 106MPH, according to the data.

What Is The Downside Of Ops?

The only reason why some individuals believe that the Ops should not be employed is because to mathematical considerations. Despite the fact that we have said several times in this text that Ops is a statistic, we have not highlighted that it is not mathematically sound in any way. We’ve previously indicated that a ballplayer’s on-base percentage and slugging percentage are combined to make his overall offensive performance (Ops). Yes, we both believe that these two numbers are ideal for determining a player’s overall ability to play the game.

Who Invented The Ops system?

Pete Palmer, please! The guy responsible for developing the Ops system took the time to explain how he came to develop a decent system and why it is still effective after so many years. He shared with us some of the positive steps he had taken, and he also stated that it would take several years to achieve perfection with this technique. The Ops strategy is clearly geared toward evaluating players on the offensive side of the field. All he did was try to make a connection between hitting and the team’s success in 1960.

What Does The Ops System Require To Be Perfect?

When the Cubs games are shown on the Marquee Sports Network, the beginning line-ups are featured with the statistic ‘Ops’ next to every name, indicating that the player was injured. For example, the Ops statistic is useful since it informs us far more than most other statistics, like as the batting average number, do. The problem with the Ops data is that they lack context, which is important for fans to understand. More context is required for the Ops statistics to be ideal.

Conclusion

Basically, we all know what it is: the Ops system is used to track the statistics of baseball players, and we all know how it works. With this approach, a player’s overall performance is expressed as a % of his or her total.

Leave a Reply

Your email address will not be published.