## Total bases – Wikipedia

Total bases are the amount of bases a player has acquired as a result of his or her hits in baseball statistics. It is a weighted total in which the weight value for a single is 1, a double is 2, a triple is 3, and a home run is 4. Example: Three singles equal three total bases; a double plus a home run equal six total bases; three triples equal nine total bases Only bases gained as a result of hits are included toward this total. It is not possible to raise a player’s total number of bases by reaching base by other methods (for example, by reaching base on balls) or by moving forward after the hit (for example, by getting a hit from a subsequent hitter).

The slugging percentage of a player is calculated by dividing the total number of bases scored by the total number of at bats.

## Records

Both Hank Aaron (left) and Babe Ruth (right) maintain the Major League Baseball records for total bases in a career and in a single season, with 6,856 and 457 runs respectively. Hank Aaron holds the all-time Major League Baseball record for total bases with 6,856 in his career. Because he has spent the most of his professional baseball career in the National League, he also owns the record for most total bases in that league with 6,591. Aaron has a total of 300 or more total bases in 15 separate seasons, which is a record.

- In the American League, Ty Cobb’s total of 5,854 bases is the all-time high.
- Babe Ruth holds the single-season MLB and American League hits marks with 457 total bases in the 1921 season.
- In a single game, Shawn Green had 19 total bases, which is a single-game record.
- Josh Hamilton of the Texas Rangers set the American League record most home runs and doubles in a game against the Baltimore Orioles on May 8, 2012, when he hit four home missiles and added a double (18 total bases).
- During a game against the Colorado Rockies at Coors Field on June 24, 2010, Pedroia went 3-for-3 with three home runs, one single, and a double for the Boston Red Sox.
- As a result of their 60 total bases, the Red Sox set the record for the most total bases scored by a club in a single game on June 8, 1950, when they defeated the St.
- Among big league pitchers, Phil Niekrog surrendered the most total bases in a lifetime (7,473), while Robin Roberts (555 total bases surrendered in 19556) set the single-season record with 555 total bases surrendered.

Allan Travers of the Detroit Tigers holds the record for the most total bases allowed by a single pitcher in a single game with 42, set in 1989.

### Postseason

In a postseason game, two players have combined to bat for a total of 14 bases. This feat has only been accomplished once in the World Series, by Albert Pujols of the St. Louis Cardinals in Game 3 of the 2011 World Series, when he hit two singles and three home runs in a single at-bat. Robertson accomplished the same feat when playing for the Pittsburgh Pirates in Game 2 of the 1971 National League Championship Series, hitting a double and three home runs in the process, according to Baseball Reference.

Louis Cardinals, but Derek Jeter has the lifetime postseason record with 302 total bases, which he has amassed throughout his time with the New York Yankees.

The Atlanta Braves collected 34 total bases in Game 5 of the 1991 World Series, defeating the Minnesota Twins by a score of 14–5.

### All-Star Games

While representing the American League in the 1946 edition of the All-Star Game, Ted Williams hit for a record 10 total bases (two singles and two home runs), setting a new record. There have been a total of 52 total bases scored in a single All-Star Game, the most recent being the 1954 edition, when the American League had 29 players and the National League had 23. The American League has amassed the most total bases by a single team in an All-Star Game twice, in 1954 and 1992, when they defeated the National League.

## References

- Team Batting Game Finder: From 1988 to 2018, playing for SFG, (requiring TB =40), ranked by highest total base hit (TB)
- “Giants 13, Braves 4”. Baseball Reference. Retrieved August 24, 2018. “Career LeadersRecords for Total Bases”. Baseball Reference. RetrievedJuly 8,2018
- “Batting SeasonCareer Finder: Spanning Multiple Seasons or entire Careers, Playing in the National League, From 1871 to 2018, (requiring TB =5500), sorted by greatest Total Bases”. Baseball Reference. RetrievedJuly 8,2018
- “Batting SeasonCareer Finder: For Single Seasons, From 1871 to 2018, (requiring TB =300), Lonnie Wheeler and Henry Aaron are two of the most well-known names in the world of sports (2014). I had a hammer at my disposal (2 ed.). On page 202 of Harper-Collins’ book, “Batting SeasonCareer Finder: Spanning Multiple Seasons or entire Careers, Playing in the American League, From 1871 to 2018, (requiring TB =5500), sorted by greatest Total Bases”, Baseball Reference. RetrievedJuly 8,2018
- “Active LeadersRecords for Total Bases”. Baseball-Reference.com. RetrievedApril 16,2020
- “Career LeadersRecords for Total Bases Baseball for Statheads. From 1871 to 2018, (requires TB =6000), Stats only available back to 1908 and some incomplete., sorted by greatest Total Bases”. Baseball Reference. RetrievedJuly 9,2018
- “Team Batting Game Finder: From 1908 to 2018, (require TB =50), sorted by greatest Total Bases”. Baseball Reference. RetrievedJuly 9,2018
- “Pitching SeasonCareer Finder: For Single Seasons, From 1871 to 2018, (require “Pittsburgh Pirates 9, San Francisco Giants 4” was the result of the game on April 16, 2020. Retrosheet from the 3rd of October, 1971. The American League defeated the National League 2-0 on April 16, 2020. “All-Time and Single-Season Postseason Batting Leaders”. Baseball Reference. RetrievedAugust 27, 2018
- “Team Batting Game Finder: In the Postseason, From 1903 to 2017, (requiring TB =32), sorted by greatest TB”. Baseball Reference. RetrievedJuly 9, 2018
- “Team Batting Game Finder: In the All-Star Game, From 1933 to 2017, (requiring TB =8), sorted by

## External links

Tony Gwynn had another outstanding season in 1997, with 592 at-bats and 220 strikeouts, and an avg of.372, which was the best in the National League. Which of these abbreviations do all of these letters stand for? The Baseball Almanac is glad to give a standard collection of acronyms that are seen and used in print on a regular basis in the sport of baseball.

## Baseball Stats

Baseball Abbreviations 101Offensive Abbreviations for Statistics | |

ABBBAVGCS2BGIDP GRSLHBPHHRRHRIBBISO LOB OBPOPSRRBISFSHSSLGSB%SBRSBSOTB3B | At BatsBases on Balls (Walks)Batting AverageCaught StealingDoublesGround into Double Plays Grand SlamsHit by PitchHitsHome Run RatioHome RunsIntentionalBasesonBalls(Walks)Isolated Power Left on Base On-Base PercentageOn-Base Plus SluggingRunsRuns Batted InSacrifice FliesSacrifice Hits (Bunts)SinglesSlugging PercentageStolen Base PercentageStolen Base RunsStolen BasesStrikeoutsTotal BasesTriples |

Pitching Abbreviations for Statistics | |

AOBB BFPBKCBOCGCGLERERAGFGOGOAOGPGSHHBPHRIBBIPIRAIPSLMB9OBAPARRPFRWS/SHOSOSVSVOTBWWP | Fly Outs (Air)Walks (Bases on Balls) Batters Facing PitcherBalksCombined ShutoutComplete GamesComplete Game LossesEarned RunsEarned Run AverageGames FinishedGround OutsGround Outs / Fly Outs RatioGames PlayedGames StartedHitsHit BattersHome RunsIntentional WalksInnings PitchedInherited Runs AllowedInnings Per StartLossesBaserunners Per 9 InningsOpponents’ Batting AveragePlate AppearancesRunsRelief FailuresRelief WinsShutoutsStrikeoutsSavesSave OpportunitiesTotal BasesWinsWild Pitches |

Defensive Abbreviations for Statistics | |

ACSDPEGPOFAPBPKPOSBTCTP | AssistsCaught StealingDouble PlaysErrorsGames PlayedOutfield AssistsPassed BallsPickoffsPutoutsStolen Bases Total ChancesTriple Plays |

Miscellaneous Abbreviations for Statistics | |

ML SER | Major League Service |

Baseball Stats Abbreviations 101 |

The “common” set has several variations (DO Doubles, TR Triples, etc.), but these are the ones that are regarded “official” and are the ones that are used here at Baseball Almanac, among other places. Did you know that the National Association (a non-official league that gave rise to the National Leagueofficial )’s statistics were destroyed in a fire in the early 1900’s? Major League Baseball organized a Special Baseball Records Committee in the 1960s to examine the irregular records that had been kept previous to the 1920 season.

## Total bases

When it comes to baseball statistics, total bases refers to the amount of bases a player has acquired through hits, which is the sum of his or her hits weighted by 1 for a single, 2 for a double, 3 for a triple, and 4 for a home run. Total bases are calculated as follows: For the purposes of this total, only bases gained through hits are considered.

With the help of the formula, it is possible to compute total bases from regularly used baseball statistics. Singles (1B) may be expressed as, which, when paired with the TB formula provided, enables for the simplified formula listed at the top of the page to be calculated.

## Leaders

All-Time Total Bases Leaders(through games ofSeptember 30, 2008) Active players inbold. | ||

Rank | Player Name | Total Bases |

1 | Hank Aaron | 6,856 |

2 | Stan Musial | 6,134 |

3 | Willie Mays | 6,066 |

4 | Barry Bonds | 5,976 |

5 | Ty Cobb | 5,854 |

6 | Babe Ruth | 5,793 |

7 | Pete Rose | 5,752 |

8 | Carl Yastrzemski | 5,539 |

9 | Eddie Murray | 5,397 |

10 | Rafael Palmeiro | 5,388 |

11 | Frank Robinson | 5,373 |

12 | Dave Winfield | 5,221 |

13 | Cal Ripken, Jr. | 5,168 |

14 | Tris Speaker | 5,101 |

15 | Ken Griffey, Jr. | 5,092 |

16 | Lou Gehrig | 5,060 |

17 | George Brett | 5,044 |

18 | Mel Ott | 5,041 |

19 | Jimmie Foxx | 4,956 |

20 | Ted Williams | 4,884 |

21 | Honus Wagner | 4,862 |

22 | Paul Molitor | 4,854 |

23 | Al Kaline | 4,852 |

24 | Reggie Jackson | 4,834 |

25 | Andre Dawson | 4,787 |

26 | Robin Yount | 4,730 |

27 | Rogers Hornsby | 4,712 |

28 | Craig Biggio | 4,711 |

29 | Ernie Banks | 4,706 |

30 | Sammy Sosa | 4,704 |

31 | Al Simmons | 4,685 |

32 | Gary Sheffield | 4,616 |

33 | Harold Baines | 4,604 |

34 | Billy Williams | 4,599 |

35 | Rickey Henderson | 4,588 |

36 | Cap Anson | 4,574 |

37 | Frank Thomas | 4,550 |

38 | Alex Rodriguez | 4,543 |

39 | Tony Perez | 4,532 |

40 | Manny Ramírez | 4,516 |

41 | Mickey Mantle | 4,511 |

42 | Roberto Clemente | 4,492 |

43 | Paul Waner | 4,478 |

44 | Nap Lajoie | 4,474 |

45 | Fred McGriff | 4,458 |

46 | Dave Parker | 4,405 |

47 | Mike Schmidt | 4,404 |

48 | Luis Gonzalez | 4,385 |

49 | Eddie Mathews | 4,349 |

50 | Sam Crawford | 4,328 |

51 | Goose Goslin | 4,325 |

52 | Brooks Robinson | 4,270 |

53 | Eddie Collins | 4,268 |

54 | Vada Pinson | 4,264 |

55 | Tony Gwynn | 4,259 |

56 | Charlie Gehringer | 4,257 |

57 | Jeff Kent | 4,246 |

58 | Lou Brock | 4,238 |

59 | Darrell Evans | 4,230 |

60 | Willie McCovey | 4,219 |

61 | Jeff Bagwell | 4,213 |

62 | Willie Stargell | 4,190 |

63 | Rusty Staub | 4,185 |

64 | Steve Finley | 4,157 |

65 | Jake Beckley | 4,150 |

66 | Harmon Killebrew | 4,143 |

67 | Jim Rice | 4,129 |

68 | Jim Thome | 4,116 |

69 | Iván Rodríguez | 4,110 |

70 | Zach Wheat | 4,100 |

71 | Al Oliver | 4,083 |

72 | Wade Boggs | 4,064 |

73 | Harry Heilmann | 4,053 |

74 | Andrés Galarraga | 4,038 |

75 | Chipper Jones | 4,020 |

76 | Roberto Alomar | 4,018 |

## Closest active players to 4,000 Total bases

- Baseball statistics
- List of the top 500 Major League Baseball home run hitters
- List of the top 500 Major League Baseball home run hitters The following is a list of all-time home run leaders throughout history. Home run champions in Major League Baseball are listed below. The 500-home-run club Baseball players who have 3000 hits and 500 home runs in Major League Baseball are listed below. List of Major League Baseball players who have 3000 hits and 300 home runs
- MLB players who have 2,000 hits
- MLB players who have 400 doubles
- MLB players who have 100 triples
- MLB players who have 1,000 runs
- MLB players who have 1,000 RBI
- MLB players who have 300 stolen bases
- MLB players who have 3000 hits and 300 home runs
- MLB players who have 100 triples a ranking of the top 100 MLB players in terms of base on balls (walks)
- Top 15 in strikeouts, as well as a list of active Major League Baseball players who rank in the Top 50
- The following is a list of Major League Baseball players with a batting average of.325 or higher: List of Major League Baseball players who have an on-base percentage of.400 or higher
- The following is a list of Major League Baseball players who have a slugging percentage of.500 or higher: List of Major League Baseball players with an on-base plus slugging percentage of.900 or higher: a list of Major League Baseball’s all-time leaders in games started and finished
- A list of Major League Baseball’s all-time leaders in career wins
- The 300-win club
- The top 100 Major League Baseball strikeout pitchers
- The 3000 strikeout club
- A list of the 300-save club and the Blown saves
- And a list of the 300-save club and the Blown saves. List of the most successful saves in Major League Baseball history

### Other

- Baseball.reference.com – Career LeadersRecords for Total Bases
- ESPN’s MLB Statistics Glossary
- Baseball.reference.com – Career LeadersRecords for Total Bases

## What is TB in box score?

TB is an abbreviation for total bases. (A single is worth one point, a double is worth two points, a triple is worth three points, and a home run is worth four points.) Suppose a hitter gets two singles, a double, and a home run, giving him a total of eight base hits. It is a structured summary that is used to summarize the outcomes of an athletic contest. The box score contains the final score of the game, as well as individual and team accomplishments during the game. Baseball, basketball, football, volleyball, and hockey are just a few of the sports in which box scores are commonly used.

## What is PF in basketball box score?

Fouls committed by the individual

## What is box plus minus?

. Box Plus/Minus, Version 2.0 (BPM) is a basketball box score-based measure that assesses a basketball player’s value to the team when the player is on the court. A rating of +5.0 indicates that the team is 5 points per 100 possessions better with the player on the court than it would be if the player were to produce at his or her average level.

## Is plus minus a good stat NBA?

“The individual game plus-minus statistic is just meaningless,” Ainge stated. On short sample sizes — for example, net points per 100 possessions — lineup net ratings can be useful; but, the plus-minus of an individual player is far too broad to be appropriately contextualized to their performance.

## What is to in basketball box score?

Passing and ballhandling are two important skills. If you have more than one player, use a single chart and put a “A” next to their name for an assist and a “TO” next to their name for a turnover. Assists are given for passes that result in made 2- or 3-point baskets on the other end. Turnovers are recorded whenever a player loses possession of the ball either out of bounds or to the other team.

## Why is it called a box score?

For example, The President intended to build his reelection campaign on his box score, which is a thorough description of activities or an event. The phrase originates in baseball, where it has been used to refer to a statistical summary of the most important aspects of a game in table form since around 1910.

## What is TB in baseball scoring?

TB is an abbreviation for total bases. (A single is worth one point, a double is worth two points, a triple is worth three points, and a home run is worth four points.) Suppose a hitter gets two singles, a double, and a home run, giving him a total of eight base hits.

## Who has the best plus minus in NBA history?

NAME GP PTS- Tim Duncan has a total of 1392 26,496 followers on Twitter. Dirk Nowitzki has a total of 1522 31,560 points. LeBron James has 1198 32,543 followers on Twitter. Tony Parker has 1254 19,473 followers on Twitter.

## What is to in basketball stats?

PF stands for personal fouls. Minutes are abbreviated as MIN. AST/TO stands for assistance to turnover ratio.

## What does PF mean in NBA box score?

Fouls committed by the individual

## How do you read a box score?

The amount of runs scored is displayed in the R column; in this example, St. Louis won the game by a score of 4 – 1 in the bottom of the R column.

The number of hits received by each team is denoted by H, while the number of mistakes committed by players on the field is denoted by E. Viewing each player’s box score provides you with additional information about the game and their performance.

## Why plus/minus is a bad stat NBA?

For a single game, the primary issue with raw plus-minus statistics is that when a player either plays poor ball while playing with an excellent lineup that outscores the opposition or performs well while their lineup is being slaughtered, the statistic does not accurately reflect his performance. This is frequently the case, particularly for individuals who earn less minutes on the field.

## What does to mean in basketball box score?

Team with advanced capabilities Since the 1996-1997 NBA season, advanced statistics like as the assist-to-turnover ratio (AST/TO), true shooting percentage (TS percent), offensive rating (OFFRTG), and defensive rating (DEFRTG) have been displayed in the box score of the game.

## What does +/- mean in NBA box score?

The point difference when a certain player is on the court, or how much better (or worse) a team performs when a specific player is on the floor, is referred to as on-court plus/minus (or on-court plus/minus). Players’ on-court plus/minus would be +6 if they are on the court while their team is winning 24-18. For example, if Player A is on the floor and his team is winning 24-18 when he goes off the court, Player A’s on-court +/- would be +6.

## What is plus/minus stat in NBA?

“Plus/Minus” (PM): The PM stat is abbreviated as “Plus/Minus,” and it indicates how well the team performed while that player was on the floor. Whenever a player receives a +5 PM, it indicates that his team outscored the opposition by 5 points while he was on the floor. The opponent’s team outscored his squad by three points while he was on the floor, resulting in a -3.

## What is so in baseball box score?

As a result, there are no strikeouts. The number of strikeouts thrown in a game. HR: Home run total: The total number of home runs allowed by that pitcher. ERA is the average number of earned runs per nine innings pitched. Don’t forget to spread the word about this content! References

## Total Bases (TB) (Baseball) – Captain Calculator

TBis the total number of bases a hitter has amassed while at the plate. There are no complicated calculations involved; each base hit has the same weight as the previous one – a single base hit adds one to the total, a double base hit adds three to the total, and so on. However, it does not take into consideration bases acquired in other methods (such as walks or hit by pitch).

## Formula – How to calculateTB

TB = 1 base hit plus (2 x 2 base hits) + (3 x 3 base hits) + (4 x 4 base hits) + (4 x home runs)

## Example

If a hitter has 75 one-base hits, 38 two-base hits, 7 three-base hits, and 13 home runs, then the following is true: TB = 75 + (38 x 2) + (7 x 3) + (38 x 2) + (38 x 3) (13 x 4) A total of 224TB is equal to 75 + 76 + 21 + 52TB. This hitter has amassed 224 bases on hits over his career.

## Sources and more resources

- Wikipedia –List of Major League Baseball players who have amassed a total of 4,000 base hits
- Baseball-reference.com –all-time career leaders and all-time records in total bases
- Baseball rules and baseball statistics from Major League Baseball, the National Collegiate Athletic Association (Baseball), the National Collegiate Athletic Association (Softball), the National Collegiate Athletic Association (Baseball and Softball), the National Federation of High Schools (NFHS), and the International Baseball Federation

## Baseball statistics – BR Bullpen

Baseball statistics are extremely essential, probably more so than in any other sport. Because the game of baseball has a fairly ordered flow to it, it lends itself to easy record keeping and statistical analysis, which is advantageous. As a result, it is extremely simple to create comparisons between players’ on-field performances, and as a result, baseball statistics are given greater prominence than they are in most other sports.

## Development of statistics

Henry Chadwick established the tradition of maintaining records of the players’ accomplishments in the 19th century, and it has continued ever since. Based on his cricketing expertise, Chadwick established the precursors of modern-day statistics such as batting average, runs scored, and runs allowed, among other things. The statistical world of baseball has traditionally been dominated by statistics such as hitters’ batting average (the number of hits divided by the number of at bats) and pitchers’ earned run average (roughly the number of runs given up by a pitcher per nine innings).

These statistics are intended to provide a more accurate representation of a player’s overall performance and contribution to his team from year to year.

In 1969, MacMillan Publishing published the firstBaseball Encyclopedia, which was the first publication to use a computer to gather statistics for the sport.

Interestingly, this research resulted in the identification of a number of players who did not appear in the official record books. In the case of Lou Proctor, for example, some of these “phantom ballplayers” were removed from the record books.

## Use of statistics

Player statistics are studied by general managers and baseball scouts in order to make conclusions about the skills of individual players. Managers, catchers, and pitchers research the statistics of opposing teams’ batters in order to determine the best way to pitch to them and place the players on the field in order to win the game. Managers and hitters research opposing pitchers in order to find out how to hit them the most effectively. Management makes personnel choices during games, such as who to start in the lineup and which relief pitcher to bring in, on the basis of statistical data collected throughout the game.

- The most frequently mentioned batting statistics are batting average, runs batted in, and home runs.
- For pitchers, wins, earned run average, and strikeouts are the classic statistics that are most frequently referenced.
- Some sabermetric data have made their way into the mainstream of baseball.
- It is calculated by multiplying the hitter’s base percentage (the number of times he or she reached base—by any means—divided by the total number of plate appearances) by the hitter’s slugging percentage (total basesdivided by at bats).
- The batting average of a pitcher is also significant in measuring his or her degree of success.
- A pitcher’s statistics may be broken down into several categories, the most important of which are K/9IP (strikeouts per nine innings), K/BB (strikeouts per walk), HR/9, WHIP (walks plus hits per inning thrown), and OOPS (opponent on-base plus slugging).
- In the case of pitchers, these statistics, such as the Defense-Independent ERA (dERA), make an attempt to evaluate a pitcher on the basis of events that are completely influenced by the pitcher’s performance and not by the strength of the defensive players behind him or her.
- An experienced manager may be more inclined to give a given batter more opportunities to face left-handed pitchers because of the hitter’s ability to hit left-handed pitchers.

Depending on the pitcher (or vice versa), other batters may have a track record of success against that pitcher, and the manager can utilize this knowledge to construct a beneficial matchup.

## Commonly used statistics

The majority of these words are also applicable to softball. Several commonly used statistics, as well as their acronyms, are described in this section. In order to provide a fast reference, the explanations below do not fully or totally describe the statistic; for a more thorough definition, please go to the related article for each statistic.

### Batting statistics

- A single hit that allows the batter to safely reach first base without the assistance of a fielding mistake is designated as 1B. 2B -Double-hits in which the hitter successfully advances to second base without the assistance of a fielding mistake
- 3B -Triple-hits in which the hitter successfully advances to third base without the assistance of a fielding error
- The term “at bat” refers to a batting appearance, which does not include bases-on-balls, balls hit by pitches, sacrifices, interference, or obstruction. At bats per home run (AB/HR) is the sum of at bats divided by the number of home runs. BA – Batting average (often abbreviated AVG) – the number of hits divided by the number of at bats The term “base on balls” refers to a situation in which a batter receives four balls and advances to first base. Walking to strikeout ratio (BB/K) is the number of base on balls divided by the number of outs in a game. Extra base hits (doubles, triples, and home runs) are referred to as XBH. FC (Fielder’s Choice) refers to situations when a runner reaches base after a fielder has decided to try to force an out on another runner. Number of ground balls out divided by the number of fly ball outs is known as AO/GO (Ground Ball Fly Ball Ratio). Number of ground balls that were hit and turned into double plays (also known as GDP or GiDP)
- When a home run is hit with the bases loaded, four runs are scored and four RBIs are recorded to the batter, this is known as a Grand Slam. Batted fair ball with no errors by the defense resulted in a hit, which allowed the batter to advance to second base. HBP (hit by pitch) refers to instances in which a pitch is touched and the batter is given first base as a consequence. Home runs are defined as hits on which the hitter successfully touches all four bases without the benefit of a defensive mistake. IBB stands for “intentional base on balls.” A base on balls (see BB above) is a base on balls that is intentionally thrown by the pitcher. IW (intentional walk) is another term for this activity. Number of times a strike three is taken or swung at and missed or a bunted foul is committed is denoted by the letter K. LOB (Left on Base) refers to the number of runners who are not out and have not scored at the end of an inning. OBP (On Base Percentage) is calculated by dividing the number of times a player has reached base (H + BB + HBP) by the total number of at bats plus walks plus hit by pitch plus sacrifice flies (AB + BB + HBP + SF). On-base plus slugging (OPS) is the sum of the on-base percentage and the slugging average. PA -Plate appearance – is the total number of completed batting appearances in a season. It is possible to assess how many runs a player has contributed to his team using the RC (Runs generated) statistic. In baseball, the term “run batted in” refers to the number of runners who have scored as the result of a hitter’s action, with the exception of when the batter grounds into a double play or reaches on an error. Sacrifice fly (SF) – the number of fly ball outs that allow another runner to advance on the basepaths or score a run
- Number of sacrifice bunts that have been made to allow another runner to advance on the basepaths or score
- SH -Sacrifice hit – SLG (slugging average) is the sum of all bases divided by the number of at-bats. To calculate total average, divide total bases plus walks plus steals by the number of plate appearances plus the number of times a player is caught stealing. T – Total bases: one for each single, two for each double, three for each triple, and four for each home run
- TB = Total bases
- TOB (Times on Base) refers to the number of times a player has reached base as a consequence of hits, walks, or being hit by a pitch.

### Baserunning statistics

- If someone is caught stealing, they are tagged out for a certain amount of time. Number of bases advanced other than through batted balls, walks, or hits by pitch
- SB -Stolen base R – Runscored – times when the player returned to home base legally and safely
- R – Runscored – times when the player returned to home base illegally and safely
- R – Runsscored – times when the player returned to home base illegally and safely
- R – Run

### Pitching statistics

- BABIP (Batting Average on Balls in Play) is a batting average against a pitcher on batted balls that end a plate appearance, excluding home runs, that is calculated after a plate appearance. BB is an abbreviation for “base on balls” (also called a “walk”) times throwing four balls, allowing the batter-runner to make it to first base on four different occasions In baseball, BB/9 is defined as the number of base on balls multiplied by nine and divided by the number of innings pitched (bases on balls for every nine innings pitched). BF – total batters faced – the total number of plate appearances made by the opponent In baseball, BK stands for the number of times a pitcher executes an unlawful throwing motion or other illegal activity while in contact with the pitching rubber, resulting in baserunners moving forward. Number of times a player has entered the game in a save position and then been charged with a run that ties the game
- BS -Blown save- CERA is an acronym that stands for Component In baseball, the term “earned run average” (ERA) refers to an estimate of a pitcher’s ERA based on the separate components of his statistical line (Ks, H, 2B, 3B, HR, BB, HBP)
- CG -Complete game – the number of games in which a player was the lone pitcher for his side
- A player’s CG -Complete game – DICE (Defense-Independent Component) is an acronym that stands for Defense-Independent Component. the estimated earned run average (ERA) of a pitcher based on the components of his statistical line that are not reliant on defense (K, HR, BB, HBP)
- In baseball, earned runs are the number of runs that are not scored as a consequence of mistakes or passed balls. ERA (earned run average) is calculated as follows: earned runs multiplied by the number of innings in a game (typically nine) divided by the number of innings pitched
- G -Games thrown (also known as’Appearances ‘) – the number of times a pitcher throws a pitch in a season. The number of games pitched in which the player was the last pitcher for his club is denoted by the letter GF (Games completed). Ground ball to fly ball ratio (G/F) is the number of ground balls permitted divided by the number of fly balls allowed. A player’s number of games pitched when he was the first pitcher for his team is denoted by the letter GS. H/9 -Hits per nine innings – Hits allowed multiplied by nine divided by the number of innings pitched (also known as H/9IP -Hits allowed per nine innings pitched)
- H/9IP -Hits allowed per nine innings pitched H -Hits Allowed – total number of hits permitted
- HB -Hit batsman – refers to a hitter who has been hit by a pitch, allowing the runner to reach first base. HLD (or H) -Hold- is the number of games in which a save situation has been entered, where the save situation has been abandoned, where at least one out has been recorded, and where the lead has not been relinquished
- HR -Home runs permitted – total number of home runs permitted It is permissible to use intentional base on balls (IBB). It stands for inherited runners, which is the amount of runners on base when the pitcher comes into the game. IRA (Inherited Runs Allowed) is the maximum number of inherited runners that can score. Innings pitched is the product of the number of outs recorded while pitching multiplied by three. Innings pitched per game (IP/GS) is the average number of innings pitched each game. K – Strikeout – the number of hitters that were hit with a third strike
- AKA K/9 (Strikeouts per nine innings) is calculated by multiplying the number of strikeouts by nine and dividing the number of innings pitched (Strikeouts per nine innings pitched). A ratio of strikeouts to walks is calculated by dividing the number of strikeouts by the number of base on balls. Winning percentage of games in which pitcher was pitching when the opposition side gained an early lead, never relinquished control of the lead, and went on to win
- Opponents batting average (OBA) is calculated by dividing the number of hits allowed by the number of at-bats faced. PITCH COUNT – Number of pitches thrown (Pitch Count)
- RA (Run Average) is the product of the number of runs allowed multiplied by nine and divided by the number of innings pitched. Running against the average is a sabermetric statistic that may be used to forecast victory %. SO – Shutout – the amount of complete games thrown without allowing a single run
- A pitcher’s save is the number of games in which a pitcher enters a game with a lead held by the pitcher’s team and exits that game with no loss of the lead, is not the winning pitcher, and either (a) the lead was three runs or less when the pitcher entered the game
- (b) the potential tying run was on base or at bat
- Or (c) the pitcher pitched three or more innings. In games when a pitcher was pitching while his team gained the lead and went on to win (also known as winning percentage), W represents the number of games won. When a pitch is thrown too high, too low, or too wide of home plate for the catcher to field, a wild pitch charge is applied, enabling one or more runners to advance or score.

### Fielding statistics

- It is possible to record the number of outs on a play in which a fielder touches the ball, save if such touching is for a putout, as a “Assist.” One for each double play in which the fielder recorded a putout or an assist, and one for each double play in which the fielder recorded an assist
- DP -Double plays Number of times a fielder fails to make a play that he should have made with reasonable effort, and the offense gains as a result of this failure
- To calculate fielding percentage, divide the total number of plays (chances less mistakes) by the total number of opportunities. INN -Innnings – the number of innings that a player spends in a specific position on the field When the ball is dropped and one or more runners advance, the catcher is charged with a passed ball (also known as a passed ball charge). Number of times a fielder tags, forces, or appeals a runner and the runner is subsequently thrown out
- PO – Putout Ranging factor (*9) divided by the number of innings played. When determining how much field a player can cover, this is taken into consideration. Stolen bases (also known as stolen bases) refer to the number of times a runner advances on a pitch without being caught by the catcher. TC stands for total chances, which includes assists, putouts, and mistakes. Each triple play during which the fielder recorded a putout or an assist is denoted by the letters TP (triple play).

### General statistics

- G -Games played – the total number of games in which the player participated in full or in part

## Further Reading

- Baseball, Statistics, and the Role of Chance in the Game by Jim Albert and Jay Bennett was published by Copernicus Books in New York in 2001 with the ISBN 978-0387988160
- Jim Albert and Jay Bennett’s Curve Ball is available on Amazon.com for $9.99. Jim Albert: Teaching Statistics Using Baseball, 2nd edition, Mathematical Association of America Press, Providence, RI, 2017.ISBN 978-1-93951-216-1
- Gabriel B. Costa, Michael R. Huber, and John T. Saccoman: Understanding Sabermetrics: An Introduction to the Science of Baseball Statistics, 2nd edition, Mathematical Association of America Press, Providence, RI, 2017.ISBN 978-1-93951-216-1
- Jim Albert: Teaching Statistics Using Baseball McFarland & Company, Jefferson, North Carolina, 2008
- William Darby: Deconstructing Major League Baseball, 1991-2004: How Statistics Illuminate Individual and Team Performances, McFarland & Company, Jefferson, North Carolina, 2008. McFarland & Company, Jefferson, North Carolina, 2006. Steve Gardner (interviewer): “According to Gary Gillette and Lyle Spatz: “Not chiseled in stone. A guide to advanced baseball statistics like as WAR, BABIP, FIP, and more”, USA Today, July 17, 2019. Baseball’s Enduring Records and the SABR Era”, The Baseball Research Journal, SABR, Volume 40, Number 2 (Fall 2011), pp. 7-11
- Glenn Guzzo, “The New Ballgame: Understanding Baseball Statistics for the Casual Fan,” ACTA Sports, Skokie, IL, 2007
- Bill James, “Stats in Baseball,” The Baseball Research Journal, SABR, Volume 40, Number 2 (Fall 2011), pp. 7-11
- Bill James, “Stats “Kevin Reavy and Ryan Spaeder:Is Baseball a Simple Game?, in: Geoffrey C. Ward and Ken Burns:Baseball: an Illustrated History, Alfred A. Knopf, New York, NY, 1994, pp. 101-103
- Keith Law:Smart Baseball: The Story Behind the Old Stats That Are Ruining the Game, the New Stats That Are Running It, and the Right Way to Think About Baseball, HarperCollins, New York, NY, 2017.

Some or all of the information in this article is licensed under the GNU Free Documentation License, which you can read more about here. “Baseball statistics” is taken from the Wikipedia page “Baseball statistics.”

## CEB Abbreviations

ANALYSIS STATISTICS | |

Avg against left-handed pitchers | |

Avg against right-handed pitchers | |

Avg whenleading off an inning | |

Avg whenbatting with 2 outs | |

Avg whenbatting with runners on base | |

Avg whenbatting with bases empty | |

Avg whenbatting with runners on 2nd or 3rd base | |

Number of groundouts (includes SACs, but not errors) | |

Number of fly outs(incudes SFs, but not errors) | |

Fly outs to groundouts ratio | |

Avg as pinch hitter | |

with runners in scoring pos | Avg whenbatting with runners in scoring positions |

w/rnr on 3rd and LT 2 outs | Avg whenbatting with runner on third base and less than 2 outs |

Avg whenbatting with 2 outs | |

Runs batted in with 2 outs | |

Success advancing runners | |

Number of timesbatter made an out and advanced at least 1 runner | |

Number of runnersleft on base by last batter of inning | |

Reach first base on error | |

Reach first base on fielder’s choice | |

Strikeouts look |

## What Does Tb Stand For In Baseball? 17 Responses For (2022), «Sport-Topics FAQ»

- Rebuilding the world’s largest forklift, as shown in the video. Most creative and interesting replies to: What is the abbreviation tb in baseball? FAQ. Some of the questions that people who are seeking for a solution to the query «What does tb stand for in baseball?» frequently ask are as follows: What’s inside a television, as demonstrated in the video
- There are 16 other answers
- Your answer
- 29 related questions

Answer in video form: Rebuilding the world’s largest forklift!

## Top best answers to the question «What does tb stand for in baseball»

Vernie Pagac responded to your question on Thursday, June 3, 2021 12:27 PM. The total bases acquired by a hitter as a result of his hits are referred to as the batter’s total bases. A single, a double, a triple, and a home run all result in one total base for the hitter, two total bases for a home run, three total bases for a triple, and four total bases for a home run. FAQ Some of the questions that people who are seeking for a solution to the query «What does tb stand for in baseball?» frequently ask are as follows:

### ❓ Baseball – what does baseball stand for?

Searching for an internet definition of baseball or a description of what baseball represents? Baseball is included in this list.

- Baseball For example, what does ncls stand for
- What does aau baseball stand for
- What does a baseball card stand for
- And so on.

### ❓ Baseball what does il stand for?

In Major League Baseball, what does the abbreviation IL stand for? List of those who have been injured IL is a sports abbreviation that stands for “Injured list,” which refers to the list of MLB players who are placed on it by their clubs when they are injured and unable to participate in games.

- What exactly does fantasy baseball represent
- What does the term Mets mean in baseball? What does the abbreviation nlcs stand for in baseball

### ❓ Baseball what does mv stand for?

Since each team is allowed six mound visits over the course of a nine-inning game (not including trips that include a pitching change), this is a new scoreboard stat at many ballparks, and each club will earn one additional visit for each extra inning. MV = Mound Visits

- What does the nlds stand for in baseball
- What does the rbi stand for in baseball
- And what does the wwba stand for in baseball

Answer in video: A fan runs onto the pitch and is knocked down by a football player! There are 16 further responses. Clair Rau responded to your question on Thursday, May 27, 2021 at 7:39 p.m. Total Bases (TB) is a unit of measure of total bases. The number of bases a batter has amassed as a result of his hits is referred to as his total bases. A single, a double, a triple, and a home run all result in one total base for the hitter, two total bases for a home run, three total bases for a triple, and four total bases for a home run.

- Total Bases (abbreviated as TB) is a batting statistic that gauges a player’s ability to get on base by hitting balls in the air.
- Morton Will responded to your question on Friday, May 28, 2021 at 9:28 p.m.
- Answer: Total bases, also known as total bases earned, is the figure that represents the total amount of bases a hitter has accrued through singles, doubles, triples, and home runs.
- Amparo Buckridge responded to your question on Saturday, May 29, 2021 at 4:43 a.m.

Shutout in both halves Games in Their Entirety Complete and total defeat in the game Runs that have been earned Games with an Earned Run Average Ground Outs Finished Ground Outs Ground Outs / Fly Outs Ratio Finished Ground Outs Ground Outs / Fly Outs Answered by Fern Waters on Sat, May 29, 2021 10:10 AMI think it stands for “total bases”.

- Answered by Billie Dickens on Sun, May 30, 2021 3:29 AM tb stands for (total bases) (total bases).
- Answered by Edd Boyer on Sun, May 30, 2021 9:25 AM What does TB mean in baseball?
- What does P mean in baseball scoring?
- What does H mean in pitching?
- A hold occurs when a relief pitcher enters the game in a save situation and maintains his team’s lead for the next relief pitcher, while recording at least one out.

Answered by Armand Leuschke on Sun, May 30, 2021 1:26 PM TB: Thermal Bake: TB: Weighted Mean Body Temperature: TB: True Brittanians (game) (game) TB: Tom-Tom Beater (Mic-O-Say, Heart of America Council, Boy Scouts of America) (Mic-O-Say, Heart of America Council, Boy Scouts of America) TB: Three-way Box: TB: Total Blockout Answered by Grace Armstrong on Sun, May 30, 2021 5:01 PM TB = Total bases – Total bases are the number of bases a batter reaches safely.

- 1 for a single, 2 for a double, 3 for a triple and 4 for a home run.
- Answered by Alisha Bruen on Sun, May 30, 2021 6:33 PM Total Chances.
- Miscellaneous Abbreviations for Statistics.
- Major League Service.
- The “common” set has several variations (DO Doubles, TR Triples, etc.), but these are the ones that are regarded “official” and are the ones that are used here at Baseball Almanac, among other places.
- Petersburg, Florida.
- Since its inception, the team’s home venue has been Tropicana Field.
- Answered by Audreanne Mertz on Wed, Jun 2, 2021 2:16 AMDefinition.

(Whereas a plate appearance refers to each completed turn batting, regardless of the result.) Answered by Jarrell Prohaska on Wed, Jun 2, 2021 8:15 AM TB is an abbreviation for Total Bases: a batting statistic that measures a player’s ability to make base hits; calculated as the sum of all bases reached by a batter as a result of base hits; calculated as: singles + (2 x doubles) + (3 x triples) + (4 x home runs) (4 x home runs).

- Don Bragg Sports Complex, Don Leyo Sport Bar, herbies hockey drill, a 500 kilogram sports automobile, dingers batting cages, and how to shrink hockey gloves are all discussed. Sports and studies are both equally important, according to Kyle TX and De ware Tijd Sport. A rod bat gs25, which sport uses the lightest ball, John Henry Smith Wvit and SportsareFree Kodi, a 450 kg hockey puck, how to shorten a baseball swing, baseball legend melvin thomas crossword clue, and more are all included. Pegasus faggio sport
- Barna bellack cup
- Yugioh 5ds ar codes
- European mountain running championships zermatt
- How to pronounce ellesse brand
- Bangalore blues challenge cup
- Baseball boy online
- Gta faggio sport
- A 1000 kg sports car accelerates
- Can chiropractors perform sports physicals in California
- Atpi sports events canada

We’ve compiled a list of 29 questions that are similar to “What does tb stand for in baseball?” so you can be sure to get the answer! What does the abbreviation aau baseball mean in baseball? AAU baseball is a recreational sport. Several AAU baseball teams in North Carolina NC are located throughout the Tar Heel State, since the state is regarded among the top three baseball districts in the country. Meanwhile, AAU baseball is taking place. In addition to having over 400 AAU baseball teams in Massachusetts, the New England District also includes organizations in Connecticut, Maine, New Hampshire, Rhode Island, and Vermont.

- Last but not least, the Southern California The AAU baseball SoCal District is considered to be one of the finest in the country.
- In baseball statistics, a player is given one plate appearance (abbreviated as PA) for each time he takes a turn at the plate.
- Stats from the baseball field What does the term “whip” refer to?
- The algorithm is used to determine how many baserunners a pitcher allows every inning of play.
- Fantasy baseball is a game in which players compete against one another.
- In this post, we’ll discuss how to move IL-Eligible players into and out of the International League.
- What does the letter 2b stand for in baseball?
- 2B is a baseball statistic that refers to a “double,” which is a hit that causes the hitter to advance to second base.

### Video answer: What’s inside a tv?

What does the abbreviation ascs stand for in baseball? Are you certain that you didn’t mean ALCS? The American League Championship Series is a four-game series between the American League and the National League. What does the abbreviation baa mean in baseball? The meaning of the baseball BAA acronym is defined here. In baseball, what does the abbreviation BAA stand for? Discover the most often used BAA abbreviation in the world of Baseball.

### Video answer: How it’s made – hot dogs

What does the letter bb stand for in baseball? BB is an abbreviation meaning “Base on Balls.” A hitter receives four pitches that are determined by the umpire to be balls before the baseball is either placed into play or receives three strikes, which is the case in most cases. As a result, the hitter receives a free base and is permitted to walk to first base. A base on balls has been awarded to the batsman. What does the term “era” mean in baseball? The editorial crew of MLB.com calculated the earned run average (ERA).

Earned run average is the number of earned runs a pitcher allows per nine innings pitched – with earned runs being any runs scored without the assistance of an error or a passed ball – and indicates the number of earned runs a pitcher allows per nine innings pitched.

The earned run average (ERA) is the most widely acknowledged statistical technique for assessing pitchers. What does the letter g stand for in baseball? Game.

### Video answer: Game theory: what is ash ketchum’s real age? (pokemon)

What does the letter hr stand for in baseball? a home run in the ninth inning What does the abbreviation lrp stand for in baseball? A lengthy relief pitcher is a pitcher who enters the game in relief of the starter early in the game, generally before the 5th inning has been finished, and stays in the game until the end of the game. During the playoffs and World Series, as well as in certain circumstances during the regular season, the so-called “long relief pitcher” is only allowed to stay in the game for 1–2 innings at the maximum.

- RBI is an abbreviation in baseball that stands for runs batted in during a player’s at-bat (run batted in).
- As a result of hitting the single to center field, the runner from third base to home plate is brought in and you are credited with the run batted in for your stat line.
- What does the letter SH indicate in baseball?
- In baseball, it occurs when a hitter comes up with a runner or two on base and less than two outs.
- Definition of the Slugging Percentage (SLG).
- In contrast to on-base percentage, slugging percentage is just concerned with hits and does not take into consideration walks or hit-by-pitch situations.
- What does the letter tb stand for in baseball?

The number of bases a batter has amassed as a result of his hits is referred to as his total bases.

In baseball, what does the letter 1b stand for?

In baseball, a single occurs when a batter hits the ball and advances to first base without the assistance of an intervening error or unsuccessful effort to tag out another baserunner.

If a hitter beats out a bunt or an infield dribbler, it is referred to as a single in baseball.

A: Assists in a variety of ways.

BAA is an abbreviation for batting average against.

### Video answer: Why are 96,000,000 black balls on this reservoir?

In baseball, what does the letter al stand for? The meaning of the baseball AL acronym is defined here. In baseball, what does the letter AL stand for? Find out what the most popular AL abbreviation for Baseball is. What does the letter alds stand for in baseball? When it comes to Major League Baseball, the American League Division Series (ALDS) determines which two American League clubs will advance to the American League Championship Series (ALCS). The Division Series consists of two best-of-five-series competitions.

The American League Division Series is taking place this week.

BAA is an abbreviation for Batting Average Against (baseball) What does the term “baseball stat ops” mean?

Slugging is an acronym that stands for “on-base percentage plus slugging,” and it refers to an equation that is the product of two other separate statistics.

In baseball, what does the letter bb stand for?

Walking (also known as “base on balls”) happens when a pitcher throws four pitches that are not batted at by the batter and none of them are called strikes by the umpire.

BB are the letters that are used to represent a stroll in a scorebook. In baseball, what does the letter bk stand for? Baseball The meaning of the acronym BK is defined here. In baseball, what does the abbreviation BK stand for? Find out what the most popular BK abbreviation for Baseball is.