How To Fill Out A Baseball Scorecard

Keeping a Clean Scorecard: A Baseball Beancounter’s Bible

I’m a statistician by training. As a statistician, I’m a big fan of your work. I enjoy statistics that are comprised of acronyms and may cause Joe Morgan to become perplexed. I believe that most of the standard statics we utilize are faulty, incomplete, and too frequently fall prey to small sample sizes and other problems, as well as other factors. However, regardless of whether you believe that the Win is the most important statistic or if you like to examine contextual wOBAs and compare them to a player’s VORP for the season, all of these figures must originate someplace.

Obviously, this is a baseball reference.

That’s correct, and it’s reasonable.

There are a variety of options for obtaining a scorecard these days.

  1. Alternatively, you can do what I do and create your own cards.
  2. Because they have a reasonable amount of pitchers’ places available, they have enough of room for substitutes, and the scorecard isn’t unduly packed on the actual score box, this is the case.
  3. Okay, let’s start from the very beginning with the most fundamental concepts, beginning with Positions.
  4. But I’ll proceed on the assumption that you don’t and tell you anyway.
  5. 7 – Left Field is the position.
  6. This shorthand is used to conserve space in the score box so that plays may be scored as they occur.
  7. The terms “offense” and “defense” each have their own particular notation.

The number “6-3” would be used to indicate a groundout from the shortstop to the first baseman.

Let us start with the basics.

An out-of-bounds play is often scored simply by writing a huge number above the score box to denote which fielder made the catch.

Some people like to use the letter “F8,” but I prefer the number “F8” on its own, and I’ll explain why in just a moment.

I prefer to clearly write them on my scorecard as “L8” or “pop6,” which indicates a lineout to CF or a popout to SS, respectively.

It doesn’t matter who catches it if the CF, RF, and 2B are all closing on the ball.

It is, however, still an out if the ball is hit clearly to right field and the 2B is nowhere to be found.

Popouts are rare in baseball.

I score these the same as if they were fair balls, but here is the point at which I insert the “F” that I described previously in the discussion.

We can’t forget about double plays in this discussion.

Taking the Tulo-Barmes-Helton DP as an example, the score is 6-4-3.

However, if the back end of the double play is not completed, you will not be penalized for an error.

” This play would be scored as a Fielder’s Choice, 6-4-3, with the runner out at second base, as shown below.

It’s basically defined as every instance in which a runner reaches because the fielder chose to get someone else out instead is referred to as a fielder’s choice.

A grounder to 1B that is fielded by the 1B on their own and either tags the runner or touches the bag is simply scored as “3u,” which is an abbreviation for “3-unassisted,” and is the lowest possible score.

Typically, you’ll only see this with the 1B and 3B, but it can happen with other classes as well.

In order to register a strikeout, you must simply indicate which strikeout it is in the bottom-right corner of the scorecard by circling it.

Look over to the other side of the plate for a moment.

You just track the batter’s journey down the basepaths and note how he arrived at his destination.

A double to RF would be denoted by the letters “2B9.” A triple to the letter CF is “3B8.” Have you gotten the picture?

But, you might wonder, what happens if they divide the difference.

When the CF and the RF are ripping after the ball, the CF will grab it first, and Chipper Jones will be limited to 2 bags since the CF possesses a cannon of an arm, as shown in the video above.

It is possible to make an exception when the ball is obviously in RF, but Adam Dunn slid for it and missed it miserably, and Shane Victorino had the play covered and prevented an inside-the-parker from being scored.

Then it’s on to pitching.

K, BB, HBP, and HR are all possible outcomes.

To create the appearance of a strikeout, place a huge Backwards K above the box.

When you have a dinger, you have to write down where the ball departed the park.

You get a “HR7” for your efforts.

Moving on to the scorecard now that we’ve covered the notation part of our discussion.

The first step is to fill up the scorecard with pertinent information, such as the date, time, scorer, weather conditions, and umpires, among other things.

The player’s uniform number should be included in the left box, followed by their name, and finally their position number should be included.

As soon as we have completed all of the paperwork, we will begin playing the game.

However, while the fundamentals of how to mark outs and hits, along with the appropriate placements, are quite general, this does not imply that you must copy my method exactly.

Do whatever makes the most sense to you in terms of keeping a record of the game!

During this process, I’ll give you a play-by-play of what’s going on and then paste how I score it as we go along.

Fowler hits a single to center field on a 2-1 count.

In order to score this, we darken the line to indicate how far Fowler made it on his hit, and then write the necessary notation to indicate what he did in order to reach that point.

You are not have to be sequential; instead, you can just mark “x” for each strike or ball.

Now, some people would circle the pitch or anything like that, but I don’t generally go into such depth with my notes.

In addition, you may opt to score it as “SB7” to signify that he took the bag while the LF was still on the field.

Todd Helton, who is batting third, grounds out to second base on a 2-0 count.

We track Fowler’s movement along the basepaths by filling in the gaps in the line and noting who has moved him forward.

We indicate Atkins’ move to first base by filling in the line and marking “5” to credit Atkins with the RBI, and we advance Fowler to home plate by filling in the line and marking “5” to credit Atkins with the RBI.

Hawpe, who is batting 5th, splits the gap with the first pitch, advancing Atkins to third base (slow).

Hawpe accomplished something, so we move Atkins up to 3B by marking the “9” to indicate that something happened, and then we add the arrow to indicate that Hawpe got him all the way along.

Hawpe and Atkins, without a doubt, do not progress.

Atkins is victorious.

Iannetta, who is batting eighth, is hit by seven pitches, one of which is a foul ball.

Ubaldo is batting ninth.

There’s nothing to it.

Following your understanding of the fundamentals, you may move on to asking questions regarding scorekeeping that are more specific to your situation.

Keep in mind that baseball is a sport that requires discipline, not just in terms of pitching, fielding, and batting, but also in the way records are kept and statistics are compiled.

I’d want to express my gratitude to Patrick McGovern of for making such beautiful designs available. It has been years since I’ve used his scorecards, and they are truly remarkable in their simplicity.


The techniques used by individual fans to keep a scorecard vary, and many of them create their own notations for their scores. However, here’s a straightforward method: As an example, if the batter grounded out to shortstop, enter the number “6-3,” which indicates that the shortstop threw him out at first base. If the batter hits a fly ball to left field, mark the spot with a “7.” If the hitter receives a hit, record the hit in the appropriate field according to the base he reached. Each of the box’s four corners symbolizes a base, with the lower-right corner being the first to represent a base.

  • For every time he doubles, write a “=” in the top right corner, and so on.
  • As the runner makes his or her way forward, place the proper symbol in the corresponding corner.
  • Using the above example, if the No.
  • The usage of consistent numbers in this situation is preferred by some, as it allows you to identify who did what even after the lineup changes.
  • At the conclusion of the game, you will be able to sum the totals of the innings to obtain the final score.

How To Score a Baseball Game With Pencil and Paper

The practice of keeping score in a baseball game with a piece of paper and a pencil dates back to the early days of the game. Keeping score is a terrific method for a fan to become more involved in the game. You’ll become completely absorbed in the game. Furthermore, each scorecard tells a tale about the game that you are attending. Scorecards are a terrific way to keep track of all the baseball games you’ve been to throughout the years. Because of the proliferation of high-tech scoreboards and mobile phones that can provide real-time updates in the palm of your hand, keeping score using a game card is becoming more obsolete.

  1. Prepare the playing card Take a look at your card.
  2. If you don’t want to spend $4 for a program, you may print one from the comfort of your own home using this helpful website.
  3. You should also give the players’ position number (see below) and jersey number, in addition to their names.
  4. When it comes to scoring baseball games, a shorthand has evolved to make things easier for everyone.

You are free to build your own style, however the following is the normal procedure: Numbers indicating where you are on the map. Each position has a unique number allocated to it. When you record fielding plays, these numbers will be used to identify the players.

  • Pitcher- 1, Catcher- 2, First Base- 3, Second Base- 4, Third Base- 5, Shortstop- 6, Left Field- 7, Center Field- 8, Right Field- 9, Designated hitter- DH
  • Pitcher- 1, Catcher- 2, Designated hitter- DH

Batter slang for “shorthand.” When a hitter comes to bat, use the following simple acronyms to keep track of whether he was hit, walked, or struck out:

  • Walking- BB (base on balls)
  • Strikeout- K
  • Looking strikeout (when the hitter does not swing)- backwards K
  • Walked- BB (base on balls)
  • Single-base hit, double-base hit, triple-base hit, homerun-homerun, flyout-flyout, double play-double play

Follow the game

You’ve got your card ready in one hand and a hot dog coated in mustard in the other, and you’re ready to put the game out of reach. Each player has a row of squares with baseball diamonds next to their name, which represents their position on the field. These squares will be used to keep track of the progress of each batter. A single is recorded outside the diamond by writing 1B outside the diamond and shading the line from home plate to first. If the runner in first place moves to second place, the line from first to second place should be darkened.

  • Here’s an illustration: If the runner receives a point, use your pencil to fill in the diamond.
  • If that batter was the first out, circle the number “1” and write “1” on the board.
  • If the batter is out after hitting the ball, you should write a note of what transpired throughout the play.
  • For example, if Derek Jeter hits a grounder to the pitcher who then fields and tosses the ball to first base, the out would be recorded by writing “1-3” across the diamond.
  • It’s not difficult at all.
  • Consider the following scenario: Jeter is on first base after hitting a single.
  • The shortstop tosses it to second, allowing Jeter to get out on the force play.

Here’s how we go about recording it.

This may be accomplished by darkening the line from first to second only halfway through.

Jeter’s starting lineup will look somewhat like this: To indicate the fielding sequence for Giambi, we will write “6-4-3” across the diamond on Giambi’s row.

Please don’t forget to include a “2” with a circle around it to indicate that he was the second player to be eliminated.

So, if the centerfielder catches a fly ball, you would write “F8” within the diamond of the batter who hit the ball to indicate that the centerfielder made the catch.

See also:  How To Watch Playoff Baseball

Consider the following scenario: Jeter was on first after hitting a single.

The third baseman fields the ball and tosses it to second base, resulting in a force out. As an example, here is what Jeter’s row might look like: If you have a card that looks like this at the conclusion of the game, you should avoid it. Pay close attention, then.

Make it your own

After you’ve mastered the fundamentals, you may start incorporating your own personal flair into your scorekeeping. There is no “wrong” or “right” method to go about this. The difficulty is to come up with a method that will allow you to easily keep track of the progress of a video game. An excellent example of someone who has customized their scorecard may be seen here.

What’s the Score?: The Basics of Scorekeeping

Scorekeeping in baseball and softball entails much more than simply keeping track of how many runs are brought across the plate. As a result, the system of statistics, symbols, and methods that is as much a part of the game as an old glove, is a language all its own in the world of baseball. However, it is not difficult to learn. Moreover, after you’ve mastered the art of keeping score, you’ll be able to keep track of every pitch, every at-bat, every hit, and every out in the game. Each league will have an Official Scorer, who will be appointed by the League President.

  1. Whenever possible, the scorer will transmit such choices to the press by hand signals or over the loudspeaker system, and he or she will also notify the announcer of such decisions if he or she requests it.
  2. The scorer must adhere precisely to the Scoring Rules in order to ensure that all records are kept in the same manner.
  3. If the teams switch sides before three outs are called, the scorer is responsible for promptly notifying the umpire of the error.
  4. This includes noting the score, the number of outs, the position of any runners, and the number of balls and strikes the batter has received.
  5. In his or her official capacity, the scorer represents the league and is entitled to the respect and dignity that go along with the position.

The Basics

The method that gives a number to each player is the basis of the scorekeeping process. Don’t mistake them with jersey numbers; these standard numerical symbols used in scorekeeping remain constant throughout the game: 1 = pitcher; 2 = pitcher catcher 2 = catcher 3 is the number of the first baseman. 4 = second base in baseball 5th base is represented by the number 5. 6 denotes a shortstop. 7 denotes the left field position. 8 is the middle of the field. 9 represents the right field. Using a 10-player lineup, the number “10” might suggest a short fielder or fourth outfielder, for example.

  • Among these are: 1B is an abbreviation for single.
  • 3B is an abbreviation for triple.
  • DP is an abbreviation for double play.
  • E stands for error.

WP is an abbreviation for wild pitch. PB is an abbreviation for passed ball. RBI stands for run batted inSB stands for stolen base IP is an abbreviation for Illegal Pitch (Major Division and below) The abbreviation BK stands for balk (for intermediate 50/70 and higher).

Trying It Out

Write out the batting order for each team to get things started. They will be traded between the two managers and will not be able to alter throughout the game, with the exception of substitutes. It is critical to record player jersey numbers alongside the batting order in order to ensure that the appropriate players bat in the appropriate order. The basic scorebook will resemble a gigantic checkerboard, with nine (or ten, or more) rows going across the page and a matching number of columns going down the page, as seen in the illustration.

  • For example, the first inning, second inning, and so on are all separated by a column.
  • Consider the Mudville Mudhens, who are batting in the first inning of the opening game of the season.
  • For the sake of argument, let’s say the leadoff batter grounds out to the shortstop.
  • This would be stated in Section 6-3.
  • Similarly, a grounder to third base would result in a 5-3 score.
  • The letters L8 or F8 may be used to represent a lineout to center field, with a straight line above the F and the 8 to suggest a line drive.
  • Again, various scorers use different symbols, but if the ball is thrown to the center fielder, the “8” is always used to indicate a successful throw.

Some scorebooks will have little squares within each at-bat square to indicate this, while others will not have any.

Keeping accurate pitch counts is made possible by this method.

The second hitter is now on the mound.

He smacks a single to the right field gap.

A line should be drawn from home plate to first base in his at-bat square, with “1B” or “1B9” written next to the line in a paper scorebook to indicate where he is at first base.

The Mudhens now have a runner on first base, one out, and their third batter is on the mound for them.

He smacks a double to the right field corner.

During this time, the runner on first came all the way around and scored on the play as well.

In his at-bat square, indicate that he has completed the whole circuit of the diamond, including stops at second, third, and home.

That diamond should be colored in to signify that he scored a run.

What is the significance of the number 6?

Meanwhile, on the No.

Because there won’t be much place for all of this in a paper scorebook, it’s vital to write short — yet legibly — in order to avoid confusion.

The runner on second tries to steal third but is thrown out because of his inexperience.

Almost certainly 2-5, since the catcher “2” tossed to the third baseman, “5,” who tagged him out at third base.

The Mudhens have two outs left, and Casey is on the mound. Casey, on the other hand, is unstoppable. Casey receives a “K” in this instance, which is the global scoring sign for a strikeout. Alternatively, a reverse K indicates that the hitter glanced at strike three but did not swing.

Heading to the Bottom

For starters, make a list of the batting order for each club. Unless they are substituted, they will be traded between the two managers and are unable to alter throughout the game. It is critical to record player jersey numbers together with the batting order in order to ensure that the appropriate players bat in the appropriate order throughout the game. The basic scorebook will be shaped like a gigantic checkerboard, with nine (or ten or more) rows going across the page and a matching number of columns going down the page, as shown in the illustration.

  1. There is a column for the first inning, a column for the second inning, and so on and so on.
  2. Consider the Mudville Mudhens, who are batting in the first inning of the first game of the series.
  3. Let’s say the opening batter hits a ground ball to the shortstop, and the game continues.
  4. As a result, the number 6-3 would be indicated.
  5. A grounder to third base would result in a 5-3 score as well.
  6. The letters L8 or F8 may be used to signify a line drive to center field, with a straight line drawn between the F and the 8 to suggest a lineout to right field.
  7. Every time the ball is delivered to the center fielder, a different sign is used by the different scorers, although the “8” is always used in this case.

This is shown by little squares within each at-bat square in some scorebooks to indicate that the player is at bat.

This enables you to retain accurate pitch counts during the performance.

This time it’s the turn of the second batter.

To the right of the infield, he hits a single.

A line should be drawn from home plate to first base in his at-bat square, with “1B” or “1B9” written next to the line in a paper scorebook to indicate where he is at bat.

He plays shortstop for the team.

In this case, the score is “2B9,” and a line is drawn to indicate that he moved from home plate to first base to second base and then back again.

What is the point value of that?

Following his completion of the entire journey, you have traced the entire diamond in his square with your pencil.

Add a “6” at the bottom of the diamond, near home plate, to indicate how many runs he scored that day.

That suggests that the “6,” or shortstop, was the one who intentionally drove him in to the outfield fence.

3 hitter’s square with the word “RBI.” When utilizing a paper scorebook, it’s vital to write tiny — yet legibly — in order to make the most of the limited space.

Attempting to steal third from the runner on second, the runner is thrown out.

Almost certainly 2-5, since the catcher “2” tossed to the third baseman, “5,” who tagged him out at second base.

Fortunately for Casey, he gets the better of him this time. Casey is given a “K,” which is the universal scoring sign for a strikeout in this situation. Another option is that the hitter stared at strike three but didn’t take a step.

How to Provide a Box Score

The balance (or proof) of a box score is achieved when the sum of the team’s times at bat, bases on balls received, hit batters, sacrifice bunts, sacrifice flies, and batters awarded first base because of interference or obstruction equals the sum of the team’s runs, players left on base, runners removed under playing rule 7.13(c) (Little League Baseball Majors and below), and the putouts of the opposing team.

Give It a Try

The most effective approach to learn is to get started right away. Watch many competent scorekeepers and keep a parallel book to see which approach is the most effective for you to learn from. It is extremely beneficial to observe Little League and high school games in person, as well as professional baseball games on television, while paying close attention to the scoring decisions. Keep a scorebook that is well-organized and easy to interpret as your knowledge of the specific rules grows. Even while it is not a task to be taken lightly, it can be entertaining and can offer a new level to your pleasure of baseball and softball.

GameChanger, the live scoring app that provides coaching insights and fan updates, as well as the official scorekeeping tool endorsed by Little League®, has contributed this content.

Excerpts from the book “What’s the Score?” provide additional substance.

Additional information on scorekeeping practices can be obtained by contacting [email protected]

Using the Proper Symbols to Score a Baseball Game

With the advent of high-tech scoreboards in professional baseball, it is possible that scorekeeping may become extinct. However, if you take a glance around at the next game you attend, you’ll most likely see someone who is keeping track using a pencil and paper, which has been a tradition from the beginning of the game. It appears to be hard, but it is not mathematics, and if you are only scoring the game for entertainment purposes, you may not want every single detail. It is essential that you understand how to score in order to be able to function as an official scorekeeper for your team.

The purpose of a scorecard is to keep an accurate record of the game’s proceedings.

If you want to be an official scorer, you can get a scorebook from a sports goods store or order one online.

There are as many different types of score sheets and forms as there are different types of scorekeepers, and there is no one technique that is actually the perfect way.

It’s acceptable as long as the information is correct. This is a really crucial point. Always write with a pencil. Whatever your level of experience, you will occasionally need to use an eraser, whether you are doing something for the first time or have 50 years under your belt.

Abbreviations And Symbols

First, determine the starting lineups for each club. When attending a professional game, the starting lineups will be displayed on the stadium’s scoreboard and announced around 10–15 minutes before kickoff. Lineups can be provided by a game official or coach at the collegiate level or lower level. Input each player’s uniform number, name, and position on the scorecard to complete the scorecard. If you want to use letter abbreviations (like you might see on a scoreboard), you may do so. If you want to use numbers, you can do so as well.

  • Pitcher (P or 1), catcher (C or 2), first baseman (1B or 3), second baseman (2B or 4), third baseman (3B or 5), shortstop (SS or 6), left field (LF or 7), center field (CF or 8), right field (RF or 9) and designated hitter (DH) are the positions on the baseball diamond.
See also:  What Is The Distance Between Bases In Baseball

Because 1B is a single, 2B is a double, and so on, using numbers (with the exception of the DH) helps to minimize misunderstanding with the acronyms for what happens in the game. Here are some more commonly used acronyms to describe what happens in the game besides those listed above:

  • Baseball terminology: single (1B), double (2B), triple (3B), home run (HR), runs batted in (RBI). Double play (DP)
  • Fielder’s choice (FC)
  • Error (E)
  • Stolen base (SB)
  • Caught stealing (CS)
  • Unassisted (U)
  • Strikeout swinging (K)
  • Strikeout looking (backward K)
  • Double play (DP)
  • Sacrifice (SAC), wild pitch (WP), and passed ball (PB) are all terms used in baseball.

Softball games, as opposed to baseball games, are more likely to include four outfielders, as opposed to three in baseball games. According to this scenario, the left-center fielder has an 8, the right-center fielder has a 9, and the right fielder has a 10. And, depending on the league regulations, there may even be additional designated hitters in the lineup – players who bat but do not play in the field or substitute for the fielders — to help round out the order.

Sample Game: Top Of The First

In the top of the first inning, the Mariners scored one run. The game between the Seattle Mariners and the Cleveland Indians on June 11, 2007 is used as an example. Most scorecards and score sheets already have the diamond drawn in, and you only need to draw a line from the diamond to the base that the player is advancing to. Mark the balls (top line) and strikes (bottom line) in the upper left corner of each box (bottom line). To begin the sample game, say the following:

  • You draw a line from home to first base and write “1B” in the lower right corner of the diagram next to the line to denote a single by Ichiro Suzuki, who is the left fielder
  • Vidro, the second batter, then grounds out to first base, so you write “3U,” which indicates that the first baseman made the unassisted out. Suzuki moves up to second, causing you to create a line from first to second
  • Jose Guillen then hits a single, allowing Suzuki to cross the plate. As a result, place a “1B” in the lower right corner and “RBI” in the lower left corner. Draw a line from Suzuki’s line to the second and third positions, and then to the finish line. Most scorekeepers then fill in the box so that they can see how many runs have scored at a glance
  • For example, if Raul Ibanez flies out to right field, put a “9” in the box to indicate that the right fielder caught the fly ball
  • After that, Kenji Johjima singles and Guillen advances to second
  • And after that, Kenji Johjima singles and Guillen advances to third. Afterwards, Ben Broussard grounds out to the second baseman, who tosses the ball to first, making the score “4-3.”

Seattle has taken a 1-0 lead. Seattle has 1 run, 3 hits, 0 errors, and 2 men left on base, according to the lineup below. Take notice of the line below Broussard, which indicates that it was the final player out. That way, you can quickly tell where you need to begin the following inning.

Sample Game: Bottom Of The First

In the bottom of the first inning, the Indians left the bases loaded for the opposing team. In the bottom of the first inning, it is Cleveland’s time to bat.

  • Grady Sizemore is struck out on a 3-2 pitch to right field, therefore place a “9” in that area on the scoresheet. Jason Michaels then hits a fly out to left field, which should be marked with a “7.” Assuming there are two outs, Casey Blake singles on a 2-2 pitch, resulting in the designation “1B” in the bottom right corner and a line to first base
  • Travis Hafner then hits a double, allowing Blake to advance to third base. Because of this, Hafner is placed at second base and Blake at third
  • Jhonny Peralta then walks, therefore he is designated as a base on balls adjacent to the first baseman’s line to first base. Hafner and Blake remain in their positions
  • With the bases loaded, Ryan Garko flies out to left field on a 1-2 pitch. It should be marked with a “7.” As a result, the Indians leave three runners on base in the first inning.

Below the lineups, it is noted that there were no runs scored on two hits, with no errors, and three runners left on the field.

Sample Game: Top Of The Third

The Mariners scored four runs in the third inning to take a commanding lead. Let’s fast forward to the third inning of the Seattle game.

  • First, Carlos Guillen singles off the first pitch, which should be marked with “1B” and a line to first
  • Then Raul Ibanez hits a home run off the second pitch, which should be marked with “2B” and a line to second. As a result, write “HR” in the lower right corner, and because he scored two runs, write “2 RBI” in the lower left corner. He and Guillen both travel all the way around the bases
  • Kenji Johjima then lines out to third base, so write “5” in that place
  • Then Ben Broussard flies out to center field to finish the game. In that spot, there’s a “8,” which leads to Adrian Beltre’s RBI single on a 1-2 pitch. Write “1B” on the board and draw a line from home plate to first base
  • Jose Lopez is up next, and he knocks another home run on the first pitch. In the same vein as Ibanez, he receives the same quip. Write “HR” in the lower left-hand corner, “2 RBI” in the lower right-hand corner, then continue writing all the way around the bases. Additionally, Beltre completes a full circuit of the bases
  • Yuniesky Betancourt subsequently flies out to first base for the third out.

The Mariners had a big inning on their hands. On the bottom of the lineup, there are 4 runs, 4 hits, 0 errors, and 0 men left on base. The score is 5-0 in favor of the team.

Sample Game: Bottom Of The Fifth

The Indians scored three runs in the fifth inning to take a commanding lead. The Mariners added two more in the fourth inning to make the score 7-0. Let’s fast forward to the fifth inning of the Indians’ game.

  • It all starts with a ground out by Josh Barfield to the third baseman (who is 5″ tall), who then delivers the ball to first (“3”). As a result, the score is 5-3. After that, Kelly Shoppach hits a single, so put “1B” in the lower left corner and a line from home to first
  • Grady Sizemore follows with a single of his own. To mark Shoppach’s progression to second, draw a line from first to second
  • Jason Michaels does the same thing. Sizemore is placed second, and Shoppach is placed third
  • The next round becomes a little more tricky. Blake is the hitter, and he drives in two runs with a ground ball to the shortstop, who throws home to force Shoppach from the game. He manages to go to first base. As a result, construct a line between third and home that prevents Shoppach’s progress, and move Sizemore to third and Michaels to first while putting Blake on first. Blake’s box has a “FC” (fielder’s choice, meaning he didn’t go for the out on the batter) and a “6-2,” which means shortstop to catcher
  • The next batter is Travis Hafner, who hits a single to right-center field. Sizemore and Michaels each score a goal, and Blake moves up to second place. As a result, Hafner receives a “1B” and moves up to first. In addition, he receives “2 RBI.” In order to color in their diamonds, Sizemore and Michaels must travel all the way home. Draw a line from first to second in Blake’s box
  • The next batter is Jhonny Peralta, who hits a single to bring Blake home with the winning run. Hafner takes over at second base. As a result, Peralta receives the letters “1B,” a “RBI” in the lower left corner, and a line from first base to home. Complete Blake’s diamond and color him in, then shift Hafner from first to second place on the list. Ryan Garko hits a fly out to right field to bring the inning to a close. That’s a “9,” by the way.

So the final tally is 3 runs, 5 hits, 0 errors, and 2 runners left on base for the Reds.

Sample Game: Bottom Of The Sixth

In the sixth inning, the Indians scored two runs. Now for the Indians’ sixth inning:

  • In his box, put “2B,” a line from home to first and first to second, and “RBI” because Nixon flies out to center (“8”)
  • Barfield hits a single
  • Shoppach hits a double
  • And Barfield scores as a result of Shoppach’s double. Barfield’s diamond has been colored
  • From Cha Seung Baek to Eric O’Flaherty, the Mariners have changed their starting pitchers. You may begin filling up Baek’s box on the Mariners sheet by clicking on it. A total of 27 hitters were faced by him throughout his 5 1/3 innings of work. He allowed 10 hits, 1 walk, 4 strikeouts, and walks. However, you are unable to complete his runs permitted line at this time. He was the one who placed Shoppach on second base
  • Sizemore then knocks a single to left field, advancing Shoppach to third. Sizemore is given the position of first baseman and a line from home to first base
  • Shoppach’s line is extended to third base
  • And Sean Green takes over for O’Flaherty. O’Flaherty is given 0 innings and 1 hit. He’s in charge of Sizemore, who’s at first base
  • Michaels is hit by a pitch while trying to steal second. Put a “K” in his position, and Blake follows it up with a single that brings Shoppach in. Fill in the blanks with “1B” and a “RBI.” Bring Shoppach back to his house and color in his diamond. Sizemore advances to third base, and the official scorer determines that Sizemore advanced as a result of a fielding mistake by the left fielder. Placing the letter “E7” next to the line between second and third in Sizemore’s location effectively puts an end to Baek’s career. All five runs are earned, and the Mariners have changed pitchers once more, this time to George Sherrill. As a result, in Green’s line, placed 1/3 of an inning, one hit, and one strikeout in the two hitters that faced the pitcher. Because he is accountable for Blake, you are unable to fill in the blanks for his runs at this time
  • Hafner gets thrown out at third base. So that’s a “5” on the scale. That brings the inning to a stop and puts an end to the careers of both O’Flaherty and Green, who both get a “0” next to their runs and earned runs totals. A side note: If Sizemore had scored, O’Flaherty’s run would have been unearned because he had advanced one base on an error
  • However, he did not.

In the sixth inning, the Indians scored two runs on four hits, one error, and left two men on base.

Sample Game: Top Of The Ninth

The Mariners scored the go-ahead run in the top of the ninth inning to win the game. Although they score two more runs in the eighth inning to tie the game at 7, the Indians fail to advance any further with the bases loaded. That will appear on the completed film, but you can skip forward to the start of the ninth inning if you so desire.

  • Jose Vidro gets things started with a single. To begin, write “1B” and a line to the left of the first. The Mariners then bring in Willie Bloomquist to serve as a pinch runner. It’s best to indicate this by placing his name beneath Vidro and the letters “PR” next to it. Pinch runner Ben Bloomquist is brought in during the ninth inning, so place a “PR” next to first base to indicate where he came in. Jose Guillen then hits a fly out to center field, so place a “8” in that box. Raul Ibanez then hits a double to bring Bloomquist home. “2B” should be written on his line, along with “RBI.” The Bloomquist diamond should be colored in to indicate the run scored
  • Kenji Johjima then hits a single, and Ibanez moves up to third. Draw a line from first to second for Johjima, and a line from first to second for Ibanez. Ben Broussard is up next, and he hits a fly out to right field to start the inning. Despite his best efforts, Ibanez is thrown out at the plate while trying to score from third. As a result, the score is 9-2 DP. A double play is made from right field to the catcher. Draw a line between home and third base on Ibanez’s diamond to indicate that he was thrown out at home.
See also:  How To Wear A Baseball Cap With Long Hair

Finishing Up And More

Add it all up and fill in the blanks on the form. Finish up the pitching lines if necessary. It is important to note that sacrifices and walks do not count as at-bats in baseball. And here’s a link to the box score from the game, courtesy of

How to Create a Baseball Scorecard

I’m an accountant who enjoys working with spreadsheets like Excel. My wife and I run and operate our own bespoke invitation and photographic company. When I was a youngster, I used to look forward to turning on WGN-TV and watching the Chicago Cubs compete in baseball. A baseball scorecard was also a fun way for me to keep track of my progress. It made viewing the game more exciting and enjoyable, which was especially important given that the Cubs were generally on the losing end. Some things remain constant across time.

  1. The following is an illustration of what that looked like: An old-fashioned baseball scorecard, complete with handwritten notes.
  2. I wish I’d had access to a computer back then, since I could have easily created a baseball scorecard in Excel with ease.
  3. This article is also intended for parents who serve as coaches for their children’s baseball or softball games, as well.
  4. Combine and place in the center Eric Cramer is a financial analyst.

How to Create a Baseball Scorecard in Excel

The process of creating a basic scorecard in Excel is actually rather simple and straightforward. The nicest part about it is that you can make it look exactly as you want it.

  1. Cells A1 through W1 should be highlighted, and the “MergeCenter” button should be clicked. Then, using the keyboard shortcut “Ctrl + B,” make the “MergeCenter” button bold. Give your scorecard a descriptive title. My title was “Eric’s Baseball Scorecard,” which is a play on words. In addition, increase the row height to 41.75 inches. In cell A2, type “Team:” and then move the format of the cell to the right half of the cell. Additionally, format the cell in bold
  2. Insert the word “Opp:” in cell A3 and shift the format of the cell to the right, as well as formatting it as bold
  3. Fill in the blanks in cell D2 with “Start Time:” and move the format of the cell to the right, making it bold
  4. Insert the phrase “Weather:” in cell G2 and modify the format of the cell to the right, making it bold
  5. Fill in the blanks in cell J2 with “Date:” and move the cell’s format to the right so that it is bold
  6. You may design the top section of the scorecard as you like. Personally, I like to use a darker color for the backdrop and lighter color typefaces to make the text stand out more on the page. To make it clearer where a value has to be typed, I like to paint all of the input boxes the same color as the background. Normally, I choose for the palest hue of yellow available
  7. When you are completed, begin in cell A5 and work your way down to cell W5. When you are finished, enter the following headers and make them bold: No, player, position, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, AB, R, H, E, 2B, 3B, HR, RBI, SO, BB
  8. No, player, position, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
  9. Change the widths of the columns as follows: It is recommended that the widths of columns A, C, and N through W be set to 5, the width of column B should be set to 23.75, and the width of columns D through M should be set to 12
  10. Change the row heights in the following rows to the appropriate values: Set the height of rows 2 through 4 to 15 inches, the height of row 5 to 17 inches, and the height of rows 6 and 7 to 25 inches. Go to the “Insert” tab in Excel and select “Shapes” from the drop-down arrow on the “Shapes” drop-down arrow. Please click on the “Rectangle” picture (see below) to proceed.

The “Shapes” drop-down option is available. Eric Cramer13 is a member of the Cramer13 community. Draw a square in column D, below row 1, in the middle of the page. 5. Select “No Fill” from the “Shape Fill” drop-down box by clicking on it. “Shape Fill” is selected from the drop-down menu. Eric Cramer is a 14-year-old American football player. Once you’ve done that, go to the “Shape Outline” drop-down box and choose the darkest gray color from the left column of hues. 15. Additionally, click on the “Shape Outline” drop-down menu once again and modify the “Line Weight” to 1/4 pt (see below, on the left side of the image).

  1. Next, pick “Square Dots” from the “Shape Outline” drop-down menu, which can be found under the “Dashes” option.
  2. (see below, in the middle of the image).
  3. To finish up, rotate the square until it is standing on a point, as illustrated on the right side of the figure below.
  4. Eric Cramer is 18 years old.
  5. It is also recommended that the box be displaced to the left-hand side of the box.
  6. In Excel, go to the “Developer” tab and click on the drop-down arrow next to the “Insert” button.
  7. (Note: If the Developer tab is not visible, select “Excel Options” from the Windows menu bar.) Activate the “Show Developer Tab in Ribbon” option (the third option under “Popular” menu) by selecting it from the drop-down menu.

The “Insert” drop-down option is located at the bottom of the page.

Draw a rectangle on the worksheet at a convenient location.

Create a box that is as tiny as feasible after that.

On the “Control” tab, make sure the 3-D shading checkbox is selected.

This completes the process (see below).

Eric Cramer21 is a member of the Eric Cramer21 social network.

Right-click on the box once more and select “Copy.” Then press “Ctrl + V” four more times to copy and paste the rest of the ball and strike boxes into the spreadsheet.

22-year-old Eric Cramer.

In the text box that appears, type in “Sub” and lower the font size to 11.


After that, duplicate both of those cells.

Select cells E6 through M6 and press “Ctrl + V” to copy and paste the diamond and ball/strike boxes into each of the selected cells.

Next, select cells N6 through W7 and press the F4 key, which will cause the All Borders formatting to be applied to these cells once more.

Select cells A7 through W7 in the table and then click on the “Borders” drop-down box and choose “Thick Bottom Border.” The following is how your scorecard should look: Step number 26: This is what your scorecard should look like.


Enter “Sub” into the text box that appears and reduce the font size to 11 points.


After that, select cell A8 and press “Ctrl + V” to copy and paste.

In this case, not only will the contents of the cells be copied, but so will the formatting as well.

Increase the row height to 27.75 inches in row 30.

“Inning Totals” should be entered in cell B30.

You can format this area in any way you wish.

Add a thick border around cells A30 through C30 to make them stand out.

Under “Insert,” pick a straight line from the drop-down arrow under “Shapes” on the left-hand side of the screen.

Now copy cell D30 and paste it into cells E30 through M30 to complete the sentence. You’ve completed your task! A completed baseball scorecard should look somewhat like this: Baseball Scorecard Template for a completed baseball scorecard Eric Cramer is a financial analyst.

How to Use your Baseball Scorecard

You may either print the page as is or customize it by entering your team’s lineup and then printing it. For your convenience, the following is a list of baseball score abbreviations:

Quick Reference Guide to Baseball Score Keeping

Note:This is a basic list of scoring abbreviations, not a complete list.
Scoring Reference Explanation
1 Pitcher
2 Catcher
3 1B
4 2B
5 3B
6 SS
7 LF
8 CF
9 RF
F Fly Ball
L Line Drive
HR Home Run
1B Single
2B Double
3B Triple
SB Stolen Base
K Strike Out
BB Walk
Number with a circle around it Unassisted Out
  • For example, a ground ball hit to second base with an out at first base would result in a 4-3 score. A ground ball hit to third base with a throw to second base to take out the runner on first and then a throw to first base in order to make the second out would result in a 5-4-3 score. In the case of a fly ball hit to center field, the score would be F8. A single would be scored by tracing the box from the bottom point to the right corner and recording the score as 1B. (just like a baseball field is laid out). Observe the runner changing bases and follow the line back to the last base they were at. If they score, you would color in the box and the boxes of anybody else who was on base at the time
  • HR stands for home run, and you would color in the box and the boxes of anyone else who was on base at the time

2014 is a year of transition. Eric Cramer is a financial analyst. Bob Randaleon is a songwriter and musician from the United Kingdom. The 27th of August, 2020: Sorry for the confusion; I was anticipating formulae in an Excel spreadsheet. SoccerNdogon The 27th of July, 2020: You are aware that you did not create a space to enter the names and statistics of the pitchers, aren’t you? On March 29, 2014, Eric Cramer (author) from Chicagoland posted the following: Thank you very much, Bankscottage!

  • However, this is an exceptional Hub, with excellent step-by-step instructions and the usage of images throughout.
  • Eric, you did an excellent job!
  • On March 27, 2014, Eric Cramer (author) from Chicagoland posted the following: Thank you so much, Nines!
  • In most cases, if I’m keeping score, I’ll just use the hand-drawn version.
  • ).

How a Baseball Scorecard Works

Take a look at the scorecard itself now that you’re familiar with some of the fundamental terminology and statistics that are used while filling out a scorecard. A basic scorecard may be downloaded from the Internet, purchased in books, or even purchased at the ballpark for a few dollars. Along with the card and the pencil, you’ll need something to mark your work with in case you need to make a correction. On the cards, you’ll find places for the name and date of the game, a list of the hitters and pitchers (which you’ll have to fill in for yourself), and a sequence of cells with diamonds symbolizing the field, one for each inning.

As the games unfold, make notes on your card on what is happening.

As soon as he hits a single in his very first at-bat, you put a single line on the first diamond beside his name to indicate that he has advanced to first base.

You’d write 6-3 on your scorecard – caught by 6 (the shortstop), tossed to 3 (the third baseman) (the first baseman).

A K would be placed on his square for that particular inning.

Let’s say the next guy comes up to bat and hits a homerun.

You’d put an HR on your card as a result of this.

At the conclusion of the game, you’ll sum everything together to earn the final score.

There are two options: you may look for a design that you like or simply rely on what you get at the stadium.

The good news is that the fundamental use of numbers and symbols is very consistent across the whole sport.

All it takes is a little practice and you’ll be a pro in no time. More information on baseball, scorecards, and other relevant topics may be found by clicking on the links on the following page.

Leave a Reply

Your email address will not be published.