What Is Considered A Save In Baseball

Save Opportunity (SVO)

Every time a relief pitcher either records a save or blows a save, he or she has created a save opportunity. In order to be eligible for a save opportunity, a pitcher must be the final pitcher for his team (and not the winning pitcher) and do one of the following actions:

  • If you enter the game with a three-run advantage or less, you must throw at least one inning. Enter the game with the tying run in the on-deck circle – or a run that is closer to scoring than the other team. At the very least, throw three innings.

Save possibilities are critical in determining if a save is made, whether a save is blown, and whether a hold is made. To achieve any of those three outcomes, a pitcher must first have a save opportunity available to him or her. The majority of save opportunities are often given to closers during the course of a season, since their primary responsibility is to keep games tight at the conclusion of the season. An uncredited save opportunity is awarded to a setup man who earns a hold, because he neither completed nor squandered the saved opportunity.


Save was a phrase used by general managers in the 1950s that had no specified restrictions attached to it. In simple terms, it refers to a pitcher who enters the game with a lead and finishes the game with a win – regardless of the score. In the early 1960s, the writer Jerome Holtzman was the first to specify concrete criteria for saving money. However, it wasn’t until 1969 that saves became an official statistic.

What Is a Save in Baseball? A Complete Guide to Earning One

When it comes to bringing a baseball game to a close and collecting saves, size and velocity are important factors to consider. Obviously, these aren’t the only things that count, but they certainly make scooping up savings a lot more convenient. As a baseball player, what exactly are saves? In baseball, saves are earned when a relief pitcher enters a game with a lead of three or fewer runs and pitches the remainder of the game without surrendering the lead to the opposition. Saving a game is most often accomplished by closers, although it may also be accomplished by a reliever who pitches for at least three innings.

So let’s get started.

What Is a Save in Baseball?

Saves may be made in a variety of ways, but the most important thing to remember is that they must be made in order to keep a late lead and complete the game. In order to be given the credit for a save, a pitcher must either enter the game in relief with a three-run lead or fewer, the tying run on the mound or on the bases, or pitch at least three innings in relief and complete the game for the winning club without allowing them to regain the lead. Pitchers have plenty of opportunity to earn saves in this environment, but they must all focus on protecting leads and finishing games in order to be successful.

How Do Pitchers Earn a Save?

In addition to what we’ve already discussed, it has been established that earning a save requires maintaining a lead, albeit it should be noted that this only applies in particular scenarios. When it comes to earning a save, there are three different sets of requirements, but a pitcher only has to meet one of them in order to earn the victory. The most straightforward scenario is when a pitcher enters the game in the ninth inning with a lead of three runs or less and records three outs to bring the game to a conclusion.

  • For example, in extra innings, if a visiting team gains a lead of three runs or fewer during the top half of an inning, then a reliever enters to finish the inning and give the winning side a 3-2 lead, the same scenario can be used.
  • These events are frequently the most extreme of high-leverage situations, and they do not always occur in the ninth position.
  • One requirement for a save is that the tying run must be on the bases, at bat, or on deck at the time of the save.
  • If a pitcher completes the game for the winning side, the pitcher is awarded a save credit for their efforts.
  • In some situations, even if the pitcher enters the game with a lead bigger than three runs, he may be eligible for a save if he pitches the last three innings or more.
  • Because starting pitchers must complete at least five innings in order to earn a victory, relievers who throw three or more innings seldom have the opportunity to earn saves.
  • If a pitcher pitches longer than three innings, they may earn a save; however, depending on the performance of other relievers, the official scorer may instead award the win to the reliever who finishes the game.

Although there are instances in which a pitcher may check all three boxes, the save is still still worth one point at the end of the day.

How Often Do Saves Happen?

There are numerous situations in which you can earn a save under the current rules; however, there are numerous games in which this does not occur due to the fact that the starting pitcher throws a complete game, the game is decided by a single run, or the home team wins in a walk-off victory under the current rules. In all, 1,180 saves were made in 2,429 games in Major League Baseball in 2019, resulting in a save percentage of 48.6 percent for the season. This is a significantly lower figure than in previous years, with just two other seasons since 1998 having fewer saves than this one.

  1. The increase in the number of saves has correlated with the growing use of bullpen pitchers in the MLB season.
  2. As a result, clubs made less than 10 saves on average throughout that season (147 total among 16 teams).
  3. In the 1970s, these statistics momentarily began to diverge again, but in 1980, for the first time in Major League Baseball history, there were more saves (902) than complete games (856).
  4. At some point about 1990, the number of games involving a save more or less settled to the contemporary rate, with teams averaging roughly 40 saves each year, which has remained consistent until the present.

How Did Saves Come to Be?

When baseball was first established in the mid-19th century, there was no concept of a save, or even of relief pitching in general, at the time. While baseball was played in a different fashion back then, pitchers were expected to complete their starts far into the twentieth century, and they did so on the majority of occasions in most cases. The concept of the save first emerged in the 1950s, mostly among baseball executives, with reporter Jerome Holtzman providing the first definitive description of the save in 1959.

  1. The regulations were slightly different at first, and it wasn’t until 1975 that the modern-day form of the save rule was finally implemented in its current form.
  2. The way relievers were used in the early years of the statistic was significantly different than it is now.
  3. Relief pitcher use, on the other hand, began to shift in the 1980s, with Dennis Eckersley being regarded as the first “one-inning closer,” who was employed nearly exclusively in the ninth inning until the mid-1990s.
  4. While this is a significant decrease from previous years, the number of saves of three or more innings recorded in 2019 was the greatest number recorded since 2001.

At this point, we’ve discussed how a pitcher earns a save and how the process has changed through time. How does it look in the event that an inning-ending reliever does not convert a save opportunity? He’s blown the opportunity to save face.

What Is a Blown Save?

It is true that a pitcher will not always convert on a save opportunity; as a result, another statistic has been developed to record those instances in which things go wrong for the pitcher, and that statistic is fittingly named the “blown save.” A blown save is awarded to a pitcher who enters the game in a save situation but fails to prevent the tying and/or winning runs from scoring. Blown saves can only be recovered in the same scenario as saved saves; nonetheless, there is a significant difference between the two.

  • It is conceivable for pitchers on both sides and/or even numerous pitchers on the same club to blow a save in the same game, and this is something that should be avoided.
  • Even though it is conceivable for a team to blow several saves in a single game, a single pitcher is not permitted to squander multiple saves in a single game.
  • As a result, while it is not feasible for the same pitcher to achieve both a victory and a save in the same game, it is conceivable for the same pitcher to earn both wins and blown saves in the same game.
  • Another official statistic relating to the save was created in the 1980s as well, this time under the name of the hold.
  • Let’s go through it in more detail.

What Is a Hold in Baseball?

Another metric that applies specifically to relievers is the hold rate. For those unfamiliar with the term, the hold statistic is a type of “pre-save” statistic that was developed particularly for middle relievers and set-up men. When a relief pitcher enters the game in a save situation and effectively hands over the lead to another reliever while recording at least one out, the circumstance is referred to as a hold. Given the fact that holds may only be obtained in save situations, a pitcher must enter the game with a three-run lead, or with the tying run on base, at the plate, or inside the on-deck circle.

  • A large number of statistical services, as a result, do not record holdings in their official ledgers.
  • For example, with 231 holds, long-time bullpen pitcher Arthur Rhodes owns the Major League Baseball record.
  • To put it another way, you have to look hard to locate the numbers on holds.
  • A club might have two, three, or even four relievers win saves in a single game due to the fact that they typically only pitch one inning per outing at a time.
  • It is also prohibited for a pitcher to earn a save while also recording a hold in the same game.
  • Consequently, a pitcher who’s sole duty it may be to keep a run advantage going into the seventh inning, but who fails to do so, will be slapped with the loss of the save.
  • In part because to the fact that middle relievers and setup men don’t tend to rack up high save totals, the number of holds they accumulate can be used to measure the success of pitchers who fill such roles.

With a greater understanding of what saves and holds are, you will be more prepared to understand what is at stake the next time a reliever comes out of the bullpen during a baseball game.

Odds and Ends

  • Mariano Rivera, a Hall of Fame pitcher, holds the record for most saves in a career with 652. It was established by Francisco Rodriguez of the Los Angeles Angels in 2007 that the single-season record was set at 62. When he was with the Los Angeles Dodgers from 2002 through 2004, closer Eric Gagne set an American League record by converting an unprecedented 84 straight saves, including a perfect 55-for-55 season in 2003
  • The longest save in Major League Baseball history was recorded by Joaquin Benoit of the Texas Rangers on September 3, 2002, when he worked seven innings. The game’s first hitter was hit by starting pitcher Aaron Myette, who was removed from the game. Todd Van Poppel pitched two innings of relief to earn the victory before Benoit entered the game with a 4-0 lead and finished it off. Despite the fact that the Texas Rangers became the first Major League Baseball club to score 30 runs in a game on August 22, 2007, when they defeated the Baltimore Orioles 30-3, Rangers pitcher Wes Littleton threw the last three innings, earning a save despite the 27-run margin of victory. As previously stated, Arthur Rhodes owns the Major League Baseball career record for most catches with 231 in his career. The single-season record is 41, which was matched by Joel Peralta of the Tampa Bay Rays in 2013 and Tony Watson of the Pittsburgh Pirates in 2015.

Related Articles

  • What Is the Definition of ERA in Baseball? A Complete Guide to Statistics
  • A Complete Guide to Probability
  • What is the meaning of WHIP in baseball? What is the meaning of MVR in baseball? A Comprehensive Guide to the Rule
  • What Qualifies as a Good Start in Baseball? A metric that measures.
  • What Is the Definition of a Shutout in Baseball? The significance of the phrase as well as historical data

What Is Considered A Save In Baseball? [Rules Definition]

During specific situations, a save is a statistic that is awarded to the relief pitcher who comes in and ends the game for his side. Not to worry, we’ll walk you through everything step by step. The save was first recorded by Major League Baseball in 1969, and it is an essential statistic that appears on the career statistics of many bullpen pitchers in the major leagues. Whatever level of baseball fan you are, whether you are new to the game or a seasoned veteran, understanding what a save is in this thrilling sport is essential.

See also:  Who Is Playing Baseball Tonight

What is a Save in Baseball?

An asave (SV) is a statistical term in baseball that counts the number of times a relief pitcher successfully completes an inning in which he or she was attempting to defend an advantage. The aim is to avoid allowing the tying run to cross the plate; if this happens, the save opportunity is lost, and the tying run results in a blown save for the pitcher. The most important thing to remember is that when the finishing pitcher enters the game in the ninth inning, he is going to shut the door on the opposition team (9th inning is usually when the closer is usually summoned).

A closer who gets off to a shaky start and consistently blows saves would still be credited with a large number of saves if they were to save the game on every occasion.

Let’s not forget about the winning team; it doesn’t matter if they are the visiting team or the home team; what counts is that the official scorer announces that your side is the winning team at the end of the day.

How Do You Get a Save in Baseball?

There are a number of requirements that must be completed in order for an asave to occur in baseball. First and foremost, the pitcher must enter the game with his side ahead by three runs or less (this is referred to as entering “with a save opportunity” in baseball). Second, he is unable to complete the remainder of an inning in which his team does not have any more at-bats before being removed from the game. Third, if his team has a save opportunity, he must finish the game or throw at least one inning if he is on the mound (no save situation).

  • Mariano Rivera, Trevor Hoffman, Dennis Eckersley, and Hoyt Wilhelm are among the actors who have appeared in the film.

Take a look at this video to see how to earn a saving:” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; picture-in-picture” allowfullscreen “The Dark Knight Rises: What Went Wrong?” is the title of the article. “Wisecrack Edition” > “Wisecrack Edition”

How Often Do Saves Happen?

The amount of saves varies from season to season, which is not surprising given the fact that baseball is a game with numerous factors. Every two games, on average, a save is recorded in the sport of baseball. That may appear to be a low number, but it is because the criteria for earning a victory are different than the criteria for earning a save. It is possible to be given credit for a victory even if a pitcher fails to maintain control of the game’s lead as long as his team scores enough runs later on to finally win it.

The baseball season is well underway and rigorous, but it’s definitely worth your time to keep up with the rankings and statistics as they change during the season. In the end, you never know when that next save will go down in baseball history!

Save Statistics for the Past 5 Seasons

We’ve included the save statistics for the last five MLB seasons, with the exception of 2020, which was not completed because the season was not completed.


During the 2019 MLB season, there were 1,180 saves in 2,429 games, which implies that a save was made in 48.6 percent of the games played.


A save was made in 1,244 of the 2,431 games played in Major League Baseball during the 2018 season, which means that saves were made in 51.2 percent of the games.


It is estimated that 1,244 saves were made in MLB during the 2018 season, which translates to a save in 51.2 percent (2,431) of all games played.


The 2016 MLB season saw 1,276 saves in 2,427 games, which implies that a save was made in 52.6 percent of the games played in 2016.


During the 2015 season, there were 1,292 saves in MLB games played in 2,429 games, which implies that 53.2 percent of games had a save recorded during the season.

What is a Blown Save?

A blown save happens when a pitcher enters the game in a save situation, but allows the tying and/or winning runs to score before exiting the game. A blown save is the term used by baseball analysts to describe a game in which a pitcher fails to defend a lead, resulting in his team losing the game. When a pitcher blows it, it’s referred to as “blowing it” because it’s more worse than simply giving up runs and being knocked out of the game; instead, they’re held accountable for letting a whole inning to slip away from them.

As most baseball fans are aware, a save is granted to any pitcher who completes the game with a lead over the opposition.

Considering that failed saves are very subjective, it’s difficult to identify who has the most botched saves in baseball each year, let alone across a career.


Ahold (HLD) is a statistic that is given to a relief pitcher who enters a baseball game with his team leading by no more than three runs and exits the game either without giving up the lead or without giving up any further at-bat opportunities for his team.

What is the longest save in MLB history?

Joaqun Benoit of the Detroit Tigers held the record for the longest save in Major League Baseball when he threw seven innings against the Minnesota Twins without allowing a run on April 27th.

Who has the most saves in baseball?

Mariano Rivera is the all-time saves leader in baseball, having amassed 608 saves in his Major League Baseball career.

Final Thoughts

By now, you should be able to answer any questions you have concerning saves in baseball and how they are used in the game. We also hope that you have gained some insight into the history of the main leagues. If you don’t know the answer, please leave a comment below and we’ll get back to you! The most important takeaways are to comprehend what a save is in Major League Baseball. When a game is close, you must know when to applaud and when to sit tight. Discover the factors that lead to a pitcher earning the elusive save.

Introduces newcomers to an essential statistic that may be found on the career records of many major league relief relievers. And, if you found this post useful, please forward it to a friend. This page was last updated on

Save – BR Bullpen

It is astatisticawarded to a relief pitcher, often known as acloser, who enters a game under specific conditions and keeps his team’s lead until the finish of the game. Asave (abbreviatedSVorS) For the 1969 season, the save rule was initially used, and it was later revised for the 1974 and 1975 seasons. Baseball scholars have gone through the official data in order to compute saves for all major league seasons previous to 1969, and they have done it retrospectively.


A save is given to a relief pitcher who satisfies all three of the following requirements:

  • A player qualifies if he is the winning pitcher in his club’s victory in a game in which he was the closing pitcher
  • He is not the winning pitcher
  • And he qualifies under one of the following conditions:
  • The pitcher must either enter the game with a lead of no more than three runs and pitch for at least one inning
  • Or he must enter the game, regardless of the score, with the possible tying run either on base, at bat, or on the mound
  • Or he must pitch for at least three innings. It has been decided that the word “effectively” will no longer be used in MLB rules.

A save may or may not be awarded in the last condition, and the official scorer has some discretion in making this determination. This is in accordance with Major League Rules 10.20. In a single game, no more than one save may be given credit. It is referred to as a save opportunity when a pitcher enters the game in the conditions indicated above.

Earlier Rules

A save may or may not be awarded in the last condition, and the official scorer has some discretion in making this decision. This is in accordance with Major League Rules 10.20 and 10.21a, respectively. In a single game, no more than one save can be acknowledged. It is referred to as a save opportunity when a pitcher enters the game under the circumstances outlined above.

  • To be eligible, he had to come into the game with either the possible tying or winning run on base or at the bat and keep the lead, or he had to throw at least three or more efficient innings to keep the lead.

Even if a pitcher did not complete the game, he might be credited with the save if he was pulled for either a pinch hitter or a pinch runner before the last out was recorded. The official scorer had to decide which pitcher had been the most effective when more than one pitcher was in a position to qualify for a save. He then had to award the save to that pitcher. There were instances under both former versions of the save rule where pitchers were credited with saves despite the fact that they would not have earned them under the current system, and it was possible to seeboxscores in which this occurred.


A lobbying campaign by sportswriterJerome Holtzmanof the Chicago Sun-Timesduring the 1960s resulted in the creation of the save as a statistic. Traditional pitching statistics, such as reliefwins and losses, he argued, were inadequate in capturing the work done by relief specialists, and he proposed the save as a way of quantifying the number of times a relief pitcher was successful in one of the most critical missions that he had to complete: keeping the game in the lead. The Sporting News, a weekly journal for which Holtzman also contributed articles, began tracking saves several seasons before the official definition was established under the scoring regulations.

Closers are seldom seen in a game, with the exception of in-game save scenarios.

Nowadays, closers tend to have a small number of triumphs and a losing record on the whole.

It is also possible to illustrate how relievers have been used differently throughout history by contrasting how Hall of FamerelieverRollie Fingers, who pitched in the1970s and early1980s, and Hall of FamerelieverTrevor Hoffman, who retired after the 2010 season and is second on the all-time list, have been used.

  1. Hoffman, on the other hand, had 482 career saves at the end of the 2006 season, but just 7 of them were for two or more innings, and none of them were for three or more innings.
  2. Many have expressed concern about the way the save has emerged as the primary statistic for judging contemporary relief relievers, and how this has impacted use.
  3. Teams are increasingly reliant on a group of middle relief specialists, who are frequently underappreciated, to maintain a lead until the closer enters the game.
  4. Various other tasks, such as keeping a team in the game, getting out of a jam, and pitching in extra innings, are not included in official statistics.

This is why sabermetricians have invented a variety of alternative metrics for relievers, all of which are intended to reveal which pitchers have been the most effective in relief, regardless of whether or not they have amassed a large amount of saves.

Blown Save

It is possible to be charged a blown save when a pitcher enters a game in the middle of a save situation, but allows the tying run to score. Blown saves were first recorded in 1988, although they are not officially recognized as a statistic, despite the fact that several sources keep track of them. An ineligible reliever will not be able to earn another save in that game (since the lead he was attempting to “save” has been erased), but he will be eligible to win the game (if his team recovers the lead).

As a result, most closers have only a few victories to their credit.

Due to the fact that they receive the former every time they fail, middle relievers frequently accumulate a large number of blown saves in comparison to saves, since they seldom get the opportunity to complete the game and earn the save when they execute their job effectively.

In order to get around this dilemma, theholdstatistic has been established, which is essentially a save attributed to a middle reliever on the team.

Tough Save

Points for the Rolaids Relief Man Award are awarded based on how well a save is executed. When a pitcher earns a save with the tying run on base, it is referred to as a “Tough Save.” A reliever who enters a game in which there is no opportunity for a save and loses up the lead before being replaced will be assessed a two-point penalty (the same as a blown save), but will not be charged with a blown save because there was no opportunity for a save.

All Time Leaders

All Time Leaders
Span Player Total Notes
MLB Career Mariano Rivera 602
MLB Season Francisco Rodríguez 62 2008
NPB Career Hitoki Iwase 400+
NPB Season Dennis Sarfate 54 2017
KBO Career Seung-hwan Oh 277
KBO Season Seung-hwan Oh 47 2006
Negro League Career Andy Cooper 29
Minor League Season Jamie Cochran 46 1993

Related Articles

  • Rolaids Relief Man Award, Fireman of the Year, Save Point, and Career Leaders for Saves are among the honors bestowed to firefighters.
See also:  How To Clean A White Baseball Cap

Further Reading

  • Bill Felber: I’d like to thank you for your time “Joe Posnanski: “Save evolves from stat to game-changer”, MLB.com, April 13, 2017
  • Gabriel Schechter: “All Saves Are Not Created Equal”, inThe Baseball Research Journal, Society for American Baseball Research, Cleveland, OH,35 (2007), pp. 100-10
  • Bill James: “Valuing Relievers,” The Free Press, New York, NY, 2001
  • Bill James: “Valuing Relievers”, inThe New Bill James Historical Baseball Abstract, The Free Press The Goose Egg Has the Power to Remedy the Situation “FiveThirtyEight.com published an article on April 17, 2017 stating that

What Is a Save in Baseball? A Complete Guide

Baseball has a plethora of jargon that might be bewildering. One outstanding example is the save, which has a meaning that is quite close to that of a victory. In baseball, victories are awarded to the winning pitcher of the side that has taken the lead. Saves, on the other hand, are awarded to the guy who threw the last inning for the winning side. It’s possible that you’re still perplexed by the situation at this stage. We recommend that you continue reading so that you may understand what a save is in baseball terminology.

What is a Save in Baseball?

A save is given to a relief pitcher who, under specific conditions, completes a game for the winning club and earns the victory. In a single game, a pitcher cannot earn both a save and a victory for himself.

What is the History of Saves in Baseball?

Although the term ‘Save’ has been in use since 1952, professional baseball leagues frequently used it to refer to pitchers who finished a game with a win but were not given credit for the victory. Using the parameters established by the American League, baseball writer Jerome Holtzman developed a formula in 1960 that would measure the success of a relief pitcher. The objective was to replace the present statistics, which only take into account earned run average and win-loss record, with something more comprehensive.

It was the first significant statistical category to be added since the introduction of the run batted in (RBI) statistic in 1920. Bill Singer of the Los Angeles Dodgers was given the distinction of recording the first official save of the year in which he was born.

How do Pitchers Earn a Save?

According to the official Major League Baseball standards, especially Rule 9.19, the official scorer must credit the pitcher who made the save if the pitcher meets all four of the following criteria: The following qualifications must be met: (a) He is the finishing pitcher in a game won by his team; (b) He is not the winning pitcher; (c) He is credited with at least 1/3 of an inning pitched; and (d) He meets one of the following requirements: (1) He must enter with a lead of no more than three runs and pitch for at least one inning; (2) He must enter with the potential tying run either on base, at bat, or on deck, regardless of the count (that is, the potential tying run must be either already on base or one of the first two batters he faces); or (3) He must pitch for at least three innings.

  1. If a relief pitcher achieves all of the qualifications for a save, he will be given the credit for a hold on his record.
  2. This situation occurs when the visiting club holds a three-run or smaller lead in the top half of the inning and the opposing team’s bullpen comes in to finish out the game.
  3. A save scenario would also exist if a pitcher entered a game with a five-run lead and the bases loaded, which would be declared a win for the pitcher.
  4. If the lead is greater than three runs in certain situations, the pitcher may be eligible for a save as long as he remains in the game.
  5. Generally, a starter must pitch at least five innings while allowing no more than three runs to be eligible for a save.

Are Saves in Baseball Rare?

There are several instances in which a save can be made in Major League Baseball. However, there are a large number of matches in which no saves are made. In certain situations, the home side is more likely to win in a walk-off. Nonetheless, according to the astatistics report, 1,180 saves were made in 2,429 Major League Baseball games in 2019. As a result, 48.6 percent of those games came to a close with saves. When comparing 2015 to the previous year, 53.2 percent of the games played during the regular season ended in saves.

When a player who is intended to earn a save instead allows the tying run to score, this is known as a save slip-up.

Who Has the Most Saves in an MLB Career?

Throughout baseball history, there have been players who have recorded more saves than the rest of the league.

Among these professional athletes are the following individuals:

1. Trevor Hoffman – 601 Saves

Hoffman, Trevor William, is a former Major League Baseball pitcher who played for five different organizations from 1993 to 2010. He retired from the game after the 2010 season. He was the only player in the history of the Major Leagues to accomplish the 500- and 600-save milestones in the same season. Hoffman was taken in the 11th round of the 1991 NFL Draft out of the University of Arizona, where he played football. In 1993, after struggling at the plate, he was acquired by the Florida Marlins as part of the expansion draft and quickly transitioned to the role of closer.

  1. He concluded his career with a total of 601 saves, which was a career high.
  2. A prominent attribute of Hoffman’s was his perfect strikeout rate, which was one of his most distinguishing characteristics.
  3. He then worked as the Padres’ pitching coordinator for the following two years.
  4. Lee Arthur Smith was a professional baseball player who competed in the Major Leagues for 18 years before retiring.
  5. Mr.
  6. The year before, he established a major league saves record with 47 saves in the National League, and he finished as the second-highest ranked player in the American League, earning the Cy Young Award.
  7. After his major league career came to an end, Smith spent some time as a pitching teacher for minor league teams.

3. Francisco Rodriguez – 437 Saves

Francisco José Rodriguez, Sr., commonly known as Frankie and K-Rod by fans and colleagues, is a former Venezuelan professional baseball player who played in the Major Leagues. Rodriguez was a pitcher with the Angels, the Mets, and the Orioles between 2002 and 2008. From July 2013 until 2015, he was a starting pitcher for the Milwaukee Brewers. After that, he returned to the Brewers for the 2014 and 2015 seasons. Rodriguez equaled Randy Johnson’s record for the most victories in a single playoffs in 2007, with four.

  1. Rodriguez also owns the Major League Baseball record for the most saves in a single season with 31.
  2. Aside from the individuals stated above, it’s also worth mentioning that Mariano Rivera holds the record for the most saves in a career with 652 saves over his nine-year MLB career, which spanned 1995 to 2013.
  3. A save is a statistic that refers to a relief pitcher who comes in and saves a game for the winning club in baseball.
  4. The criteria for a relief pitcher’s performance in a game were developed by Holtzman long before the statistic became an official part of Major League Baseball’s official rules.

The phrase has been popularized by a number of players, like Mariano Rivera and Francisco Rodriguez, who have amassed hundreds of saves over their professional baseball careers.

Aaron Jones

Welcome to Make Shots, my name is Aaron and I am the proprietor. On this website, I answer the most often asked basketball topics and provide my thoughts on the subjects. The beginning of my passion for basketball occurred in 2010, and I have been a fan of the sport ever since. All of the posts

What Is A Save In Baseball? Definition & Meaning On SportsLingo

A relief pitcher who closes the game for the winning side is awarded this statistic in baseball if he does it under particular, predetermined conditions.

How Do You Get A Save In Baseball?

The reliever’s performance must fulfill all four of the standards outlined below in order for the save to be recorded:

  • Serve as the victorious team’s last and most important pitching reliever
  • The pitcher is given credit if he or she pitches at least a third of an inning. The pitcher is not the one who wins the game. Ensure that the pitcher matches at least one of the following specifications:
  • A pitcher who enters the game with a lead of no more than three runs and throws at least one inning In a tie game, the pitcher enters the game with the possible tying run on base, at bat, or on the field. At least three innings are pitched by the pitcher.

Examples Of How Save Is Used In Commentary

The Yankees are up 2-1 with a runner on second and Rivera throwing a 0-2 cutter to Jones for a strike, earning the third and final out of the inning and giving him 30 saves on the season.

SportsLingo Goes The Extra-Inch With The Meaning Of Save

Although the save statistic was first recorded in 1952, it was not recognized as an official Major League Baseball statistic until 1969. But it was baseball writer Jerome Holtzman who was the first to establish the criteria for how a relief pitcher might earn a save, which was established in 1960. Holtzman was of the opinion that the statistics available at the time did not accurately reflect the performance of relievers. In The Sporting News Weekly for nine years, Holtzman kept track of the save statistic unofficially until the statistic was made official by Major League Baseball, which began keeping track of it.

Sports The Term Is Used


Abbreviated As:

S2. SV 1. S2. SV (This page has been seen 1,176 times, with 1 visit today)

What is a Blown Save in Baseball – Can a Pitcher Still Get a Win?

A closer in baseball is a player who, towards the conclusion of a game, ensures that his or her team has won. As a rule, clubs designate their best relief pitcher to serve as the closer since that pitcher is responsible for pitching the most stressful innings. However, there are situations when a pitcher is unable to complete the job with a win and is awarded a blown save. So, what exactly is a blown save, how can a pitcher accumulate such an unofficial statistic, and who are some of the pitchers who have blown the most saves in baseball history?

What is a Save Opportunity Situation?

In baseball, the save rule opportunity arises when a new pitcher (not the starting pitcher) enters a game with a three-run lead or fewer and completes the victory for their club. It may take as little as a third of an inning to earn a save, or it could take as long as three innings to earn a save. As long as the pitcher who comes in to secure the last out does so between 1/3 and 3 innings of pitching, they are awarded the save. If the pitcher entered the game with a three-run or fewer lead and later allowed further runs to score, he or she will still be awarded the save record for the game.

If the pitcher induces a double play to finish the inning, and then his team scores seven runs in the following inning, he or she can still record a save if they pitch the ninth inning and help their team win their game.

What is a Blown Save in Baseball?

In baseball, a blown save (BS) happens when a relief pitcher fails to clinch the save situation by allowing either the tying or winning run to score on the final pitch. A blown save happens when a reliever enters the game in the ninth inning with a two-run lead and allows two or more runs to be scored on him. Nevertheless, blowing a save is analogous to the HOLD statistic in that it is not an official MLB stat, but it is highly valued by teams.

Can a Blown Save in Baseball Occur Before the Ninth Inning?

A blown save in a baseball game can occur before the ninth inning of the game. Take, for example, a hypothetical situation in which the New York Yankees closer comes in to pitch in the eighth inning with a two-run lead against the Houston Astros and one runner on base. Suppose the pitcher for the New York Yankees gave up a home run against the Houston Astros’ designated hitter that tied the game, the pitcher for the Yankees would be charged with blowing the save.

Can you Blow a Save and Record the Win?

The win can still be achieved by a relief pitcher who blows the save throughout the course of the baseball game. Consider the following scenario: the Los Angeles Dodgers closer enters the game against the Boston Red Sox in the top of the ninth inning with a one-run lead and the game tied. In the ninth inning, the Red Sox scored one run on a wild pitch, which forced the Dodgers to come up to bat in the bottom of the inning. It doesn’t matter whether the Dodgers are able to score one (or more) runs in the ninth inning to break a tie, as long as the previous Dodger pitcher finished throwing in the top of ninth, they are still considered the winning pitcher, even if they failed to earn the save.

See also:  Who Do I Start Fantasy Baseball

When Was the Blown Save Introduced in Baseball?

In 1988, the statistic of a blown save became part of the baseball conversation. The Rolaids Relief Man Award was established in order to recognize a pitcher who came out of the bullpen during a regular-season game. A blown save, on the other hand, was only one component of the analysis used to evaluate a pitcher’s performance. When a relief pitcher enters a game with the tying run on the bases and a hitter at bat and allows those runs to score, the pitcher is said to have given away a save without allowing an earned run to be scored upon.

How is a Blown Save Different from a Blown Hold?

The fundamental distinction between a blown save and a blown hold is whether or not the player is in a save scenario. Consider the following scenario: the Texas Rangers starting pitcher only throws five innings against the Baltimore Orioles and leaves the game with a one-run lead. It is possible for the next pitcher to come out of the bullpen to allow two runs, but that pitcher will not be credited with the blown hold stat. Alternatively, if the starting pitcher goes eight innings and then the relieving pitcher blows the save in the ninth, they would be awarded the blown save.

Who has the Most Blown Saves in Major League Baseball History?

While a blown save may not be recorded as an official MLB statistic, several well-known pitchers have amassed the greatest number of blow saves in baseball history. As of July 2021, the following is a list of pitchers who have blown the most save opportunities.

As you can see in the table below, the top two pitchers are both Hall of Famers, demonstrating how difficult it can be to rescue games at times. Finally, you may visit this page to see the complete list of pitchers who have blown the most save opportunities.

  • Goose Gossage (Hall of Fame) has 112 points
  • Rollie Fingers (Hall of Fame) has 109 points
  • Jeff Reardon has 106 points
  • Lee Smith (Hall of Fame) has 103 points.


Summary: When clubs are looking to recruit a new pitcher during the season or offseason, the statistic of blown saves is important to take into account. Example: The Minnesota Twins’ closer over the summer may be evaluated according to the number of saved opportunities that were missed. If a club believes that replacing their closer would be beneficial to the team, they can use the blown stat to support the move in personnel.

Similar Posts

What is the role of a baseball manager? The World Series of Baseball is held every four years in the United States. In baseball, what exactly is a perfect game? Bag for baseball rosin What is the definition of DFA in baseball? WHIP in baseball refers to the pitcher’s earned run average. What Does the Abbreviation QAB Mean in Baseball? What is Baseball Arbitration, and how does it work? Baseball MVR (Most Valuable Player) How to Become a Major League Baseball Umpire TOOTBLAN How Does the Wild Card System Work in Major League Baseball?

MLB Trade Deadline is fast approaching.

What is the length of a baseball game?


When a relief pitcher enters a game with a lead and maintains it until the game’s conclusion, he or she may be eligible for a save under the specific circumstances stated in scoring rule 10.19. Listed below are the exact requirements that must be fulfilled:

  1. The last pitcher in the game (*)
  2. His team wins the game
  3. He does not qualified to be the winner
  4. AND one of the following conditions is met:

In the first inning or more, with a lead of three or less runs, the pitcher b) throws three innings of baseball Comes enters the game with a tie-breaking run on deck. The first three criteria are self-explanatory. Rule 4 is the one that can be a source of misunderstanding. a) The “standard” save entails a closer coming in to pitch the bottom of the ninth inning in order to keep a tiny advantage intact. Consider point (b), which is a little debatable. It is possible for a pitcher, who is commonly used as a mop-up man, to enter a game in the 7th with a 12 run lead and give up 11 runs and still being credited with a save if the game is completed.

  1. Consider the scenario of entering with one out in the ninth inning, bases loaded, and a one-run advantage.
  2. Occasionally, these rescues are far less deserving of credit than this one.
  3. Alternatively, with two outs and a three-run lead, with only a runner on first base.
  4. I can’t conceive of a case in which the finishing pitcher does not get an out, unless the game is canceled immediately after he enters due to inclement weather.

r/MLBTheShow – What constitutes a save?

I’ve discovered the internet! I was just interested since I brought in Blake Treinen in the 8th inning with a guy on first and two outs with a 5-1 lead to see how he would perform. Took the ball out of the park clean and then threw a flawless ninth to secure the victory. However, I was unable in obtaining the save. To make a comment, you must first log in or create an account. Runs of level 13 or less are allowed. You had a four-run advantage in the first inning, level one. If there had been one more runner on base at the time you brought him in, it would have been a saving opportunity (2 runners on would have made the on deck batter the tying run since you had a 4 run lead) 1st grade Yes, that is an unsalvageable scenario.

a second-grade education No, I’m not one of them.

12 years ago, I was at this level.

Randy Arozarena is running for President of the United States. Treinen had to either enter with a three-run lead or pitch the last three innings if he wanted to win. He didn’t do either. 1st grade While working on preserving his team’s lead, a relief pitcher must perform one of the following things:

  • If you enter the game with a three-run advantage or less, you must throw at least one inning. The tying run should be brought into the game at the on-deck circle, at the plate, or on the bases. At the conclusion of a victory (e.g., 7-9), pitch at least three innings.

Leveled up around a year and a half ago. There has been a problem with your connection to the program online. Listed below are three activities in which the holder of this card is unable to participate. 1st grade It is necessary to have a lead of three runs or fewer. level a year and a half ago Randy Arozarena is running for President of the United States. This is the subreddit for everyone who wants to share and discuss their experiences with Major League Baseball: The Show. So go ahead and tell us about your Diamond Dynasty victories, your Road to the Show journey, or how you plan on bringing your business to the Fall Classic Championship!

Powerups are unlocked in r/MLBTheShow

Reddit Inc © 2022. All rights reserved


In the Major League Baseball, Mariano Rivera, a closer for the New York Yankees, is now ranked fourth all-time in saves. Saving a game in baseball refers to keeping the lead that the pitcher’s club holds at the moment of the save.


Stats from the world of baseball The term save (abbreviated SV or S) refers to the effective preservation of a lead by a relief pitcher, generally the closer, until the finish of a baseball game. It is possible to earn saves for a pitcher if he or she meets all three of the following criteria:

  1. In a game won by his team, the pitcher is the final pitcher to throw
  2. For example, if a starting pitcher pitches a full game victory or, conversely, if a pitcher gets blown save and his team scores the winning run while he is the pitcher of record (a situation known as a “vulture win”), the pitcher is not considered the winning pitcher
  3. The pitcher meets at least one of the three requirements listed below:
  1. It is possible for him to enter the game with a lead of no more than three runs. He enters the game with the possibility of tying the game either on base, at bat, or on the field
  2. After entering the game with a lead, he must pitch at least three innings to keep the game alive.

If the pitcher gives up the lead at any time during the game, he will not be eligible for a save, but he will be the winning pitcher if his team comes back to win the game. In a single game, no more than one save may be given credit. Even when a relief pitcher meets all of the criteria for a save except for finishing the game, he will frequently be given the credit for ahold in most cases. The third rule, which is up to the opinion of the official scorer, can be problematic because it is subjective.

The term “save” refers to the definition found in Section 10.20 of the Major League Baseball Official Rules.

It is possible to be charged a blown save when a pitcher enters the game in a situation that allows him to earn a save (referred to as a “save situation”), but instead allows the tying run to score.

As in any other identical case, if that same pitcher also allows the winning run to score, and if his team does not come back to win the game, that pitcher will be credited with both the loss and a ‘blown save.’ Although the blown save is not an officially recognized statistic, numerous sites keep track of how many times it occurs.

  • An ineligible reliever will not be eligible for another save in that game (since the lead he was attempting to “save” has vanished), but he will be eligible for a win should his team take the lead back.
  • Closers spend the most of their time in the game with their side ahead, hence a defeat is almost always accompanied by a botched save.
  • Since the 1960s, the varied roles of relief pitchers have evolved, and closers who frequently throw two or more innings have become increasingly unusual; nonetheless, there are still exceptions to the rule.
  • Consider the following scenario: He begins the game with an insurmountable advantage and does not make himself eligible for a save until the lead has been reduced sufficiently to bring it within reach of the save window.

A save circumstance must exist when he first begins the game, or else he will be unable to gain a save point.

Save leaders in Major League Baseball

Active players are shown in bold, while left-handed pitchers are denoted by an asterisk (*).

300 Career Save Club

Rank Player Saves Team(s) Year(s)
1 Trevor Hoffman 482 Florida,San Diego 1993 –
2 Lee Smith 478 Chicago (NL),Boston,St. Louis,New York (AL),Baltimore,California,Cincinnati,Montreal 1980 – 97
3 John Franco * 424 Cincinnati,New York (NL),Houston 1984 – 2005
4 Mariano Rivera 413 New York (AL) 1995 –
5 Dennis Eckersley 390 Cleveland,Boston,Chicago (NL),Oakland,St. Louis 1975 – 98
6 Jeff Reardon 367 New York (NL),Montreal,Minnesota,Boston,Atlanta,Cincinnati,New York (AL) 1979 – 94
7 Randy Myers * 347 New York (NL),Cincinnati,San Diego,Chicago (NL),Baltimore,Toronto 1985 – 98
8 Rollie Fingers 341 Oakland,San Diego,Milwaukee 1968 – 85
9 John Wetteland 330 Los Angeles,Montreal,New York (AL),Texas 1989 – 2000
10 Roberto Hernandez 326 Chicago (AL),San Francisco,Tampa Bay,Kansas City,Atlanta,Philadelphia,New York (NL),Pittsburgh,Cleveland 1991 –
11 Troy Percival 324 California/Anaheim,Detroit 1995 – 2005
Billy Wagner * 324 Houston,Philadelphia,New York (NL) 1995 –
13 Jose Mesa 320 Baltimore,Cleveland,San Francisco,Seattle,Philadelphia,Pittsburgh,Colorado,Detroit 1987,1990 –
14 Rick Aguilera 318 New York (NL),Minnesota,Boston,Chicago (NL) 1985 – 2000
15 Robb Nen 314 Texas,Florida,San Francisco 1993 – 2002
16 Tom Henke 311 Texas,Toronto,St. Louis 1982 – 95
17 Rich Gossage 310 Chicago (AL),Pittsburgh,New York (AL),San Diego,Chicago (NL),San Francisco,Texas,Oakland,Seattle 1972 – 94
18 Jeff Montgomery 304 Cincinnati,Kansas City 1987 – 99
19 Doug Jones 303 Milwaukee,Cleveland,Houston,Philadelphia,Baltimore,Chicago (NL),Oakland 1982,1986 – 2000
20 Bruce Sutter 300 Chicago (NL),St. Louis,Atlanta 1976 – 1986,1988

Single season

  1. Francisco Rodriguez is a member of the Los Angeles Angels of Anaheim (2008) *Randy Myers,Chicago Cubs(1993) – 62
  2. Bobby Thigpen,Chicago White Sox(1990) 57
  3. Éric Gagné,Los Angeles Dodgers(2003) – 55
  4. John Smoltz,Atlanta Braves(2002) – 55
  5. Mariano Rivera,New York Yankees(2004) – 53
  6. Trevor Hoffman,San Diego Padres(1998) – 53
  7. Rod Beck,Chicago Cub


The asterisk (**) indicates that the streak was achieved over the course of two consecutive years.

  1. Rod Beck, San Francisco Giants (1992 – 1995) – 41**
  2. Trevor Hoffman, San Diego Padres (1997 – 1998) – 41
  3. Dennis Eckersley, Oakland Athletics(1991 – 1992) – 40

Blown Save leaders in Major League Baseball

Active players are shown in bold, while left-handed pitchers are denoted by an asterisk (*).

Career (as ofAugust 9,2006)

  1. Rich Gossage received 112 points
  2. Rollie Fingers received 109 points
  3. Jeff Reardon received 106 points
  4. Lee Smith received 103 points
  5. Bruce Sutter received 101 points
  6. John Franco * – 100 points
  7. Sparky Lyle * – 86 points
  8. Gene Garber received 82 points
  9. Kent Tekulve received 81 points
  10. Gary Lavelle received 80 points.

Single season

  1. John Hiller *,Detroit Tigers(1976) – 13
  2. Rich Gossage,New York Yankees(1983) – 13
  3. Jeff Reardon,Montreal Expos(1986) – 13
  4. Dave Righetti *,New York Yankees(1987) – 13
  5. Dan Plesac *,Milwaukee Brewers(1987) – 13
  6. Dave Righetti *

See also

Leave a Reply

Your email address will not be published.