## Slugging percentage – Wikipedia

In baseball statistics, slugging percentage (SLG) is a measure of a batter’s ability to generate runs with his bat. It is calculated as total bases divided by the number of at bats for a given player using the following formula, where ABis the number of at bats for a given player and 1B, 2B, 3B, and HRare the number of singles, doubles, triples, and home runs, respectively: 1B, 2B, 3B, and HRare the number of singles, doubles, triples, and home runs In contrast to batting average, slugging % provides greater credit to extra-base hits, like as doubles and home runs, as compared to singles in the same game.

This formula does not include plate appearances that result in walks, hit-by-pitches,interference, catcher’s sacrifice bunts, or flies, because such an appearance is not considered to be anat bat in this case (these are not factored into batting average either).

In mathematics, it is a scale of measurement whose calculated value ranges from 0 to 4.

A double is worth twice as much as a single, a triple is worth three times as much as a home run, and a home run is worth four times as much as a single.

In order to avoid confusion, it’s sometimes referred to as “slugging average” or “slugging” instead.

If the slugging percentage is.589, it would be said as “five eighty nine,” and it would be spoken as “eleven twenty seven” if it were 1.127.

## Facts about slugging percentage

A hitter’s slugging percentage is used for a variety of purposes other than determining his or her output. It may be used to evaluate pitchers in a variety of situations. It is not as prevalent as slugging-percentage against, but it is a measure of effectiveness. In 2019, the mean average SLG among all clubs in Major League Baseball was.435, according to Baseball Reference. The greatest slugging % has a numerical value of 4.000, which is the highest possible. However, no player in the history of the Major League Baseball has ever retired with a slugging percentage greater than 4.000.

Eric Cammack (2000 Mets), Scott Munninghoff (1980 Phillies), Eduardo Rodrguez (1973 Brewers), and Charlie Lindstrom are among the players on this list (1958 White Sox).

## Example calculation

Take, for example, Babe Ruth, who made his major league debut in 1920 with the New York Yankees. After 458 at-bats, Ruth collected 172 hits, which included 73 singles, 36 doubles, 9 triples, and 54 home runs, for a grand total of 388 bases. Ruth had 73 singles, 36 doubles, 9 triples, and 54 home runs, for a grand total of 388 bases. His slugging percentage for the season is calculated by dividing his total number of bases (388) by his total number of at bats (458), which equals.847. This also established a new mark for Ruth, which held until 2001, when Barry Bonds amassed 411 bases in 476 at-bats, increasing his slugging percentage to.863, which has remained unsurpassed ever since.

## Significance

It wasn’t until decades after it was first used that baseball analysts realized that it could be combined with on-base percentage (OBP) to provide a very accurate measure of the overall offensive production of a player (in fact, the combination of OBP and SLG was originally referred to as “production” by baseball writer and statisticianBill James). Branch Rickey devised a precursor meter in 1954, which is now known as the Branch Rickey metric. For example, Rickey claimed in the Lifemagazine that combining OBP with what he termed “extra base power” (EBP) would provide a more accurate estimate of player success than traditionalTriple Crown statistics.

They were among the first to combine the two modern-day statistics, multiplying them together to generate what is now known as “SLOB” (Slugging On-Base).

The next year (and probably independently), Bill Jamesapplied similar idea to hisruns createdformula, basically multiplying SLOB at bats to develop the following formula: Pete Palmer and John Thorn invented on-base plus slugging (OPS) in 1984, which is a simple combination of the two variables and is likely the most often used method of combining slugging and on-base percentage: on-base plus slugging (OBS).

In recent years, OPS has been increasingly popular as a shorthand method of evaluation for contributions as abatter, owing to its simplicity in calculation.

The theoretical maximum for “on base” is 1.000 points, but the theoretical maximum for “slugging” is 4.000 points.

350 as a nice “on base” number and as well.

## Perfect slugging percentage

There is a numerical limit of 4.000 slugging percentages that can be achieved.

A significant number of Big League Baseball players (117 as of the conclusion of the 2016 season) have achieved a 4.000 career slugging percentage in their first major league at bat by homering in their first major league at bat.

## See also

- Slugging % leaders in Major League Baseball throughout their whole careers
- Moneyball
- Sabermetrics
- And more.

## References

- “Career LeadersRecords for Slugging Percent,” Baseball Reference, retrieved on 2014-02-27
- AbBaseball Scorekeeping: A Practical Guide to the Rules, retrieved on 2014-02-27
- AcBaseball Scorekeeping: A Practical Guide to the Rules, retrieved on 2014-02-27
- ‘Slugging Percentage | The ARMory Power Pitching Academy’
- ‘Single-Season Leaders and Records for Slugging Percentage’
- ‘What is a Slugging Percentage’
- ‘Major League Baseball Batting Year-by-Year Averages’
- ‘Slugging Percentage | The ARMory Power Pitching Academy Retrieved2016-12-10
- s^ Dan Lewis is a writer who lives in the United Kingdom (2001-03-31). “Lies, Damn Lies, and RBIs,” according to nationalreview. The original version of this article was published on October 20, 2012. Barra, Allen (2012-07-01)
- Retrieved from (2001-06-20). “The finest season ever?” Salon.com. Retrieved 2007-07-15
- “The best season ever?” When it comes to OPS, separate but not nearly equal: why it is a “poor” measure, Beyond the Box Score, by Bryan Grosnick, published on September 18, 2015.

## External links

In baseball, huge hits are responsible for a large number of the game’s most thrilling plays. When a hitter hits a double into the corner of the infield, a triple into the alley, or a home run over the wall, it is called a double. Slugging % is a famous statistic that stresses the importance of swinging for the fences, and it is indicative of the sorts of plays that get spectators out of their seats and on their feet. So, what is the slugging % in this case? Extra-base hits, such as doubles, triples, and home runs, are calculated using the slugging percentage statistic, which indicates how successful a batter is at hitting these types of hits.

The statistic is determined by taking the total number of bases and dividing it by the number of at bats.

Let’s go a little more into the statistic:

## What Is Slugging Percentage in Baseball?

The purpose of slugging % is to attribute a figure to a hitter’s ability to drive the ball and rack up extra-base hits, and this is accomplished via the use of advanced statistics. Despite the fact that the statistic is known as “slugging percentage,” the term is a little misleading because it is really a ratio, or what is known as a “rate stat,” rather than a genuine percentage. A batter’s slugging percentage (often abbreviated as SLUG or SLG, or simply referred to as “slugging”) is calculated by dividing the total number of bases or the total number of bases earned in all of his hits by the total number of official at bats.

It comes down to determining the average number of bases that a batter would gain for every official at bat, which means that both the ability to collect extra-base hits and the ability to do so on a consistent basis are important factors in achieving a high slugging percentage in the game of baseball.

## How Do You Calculate Slugging Percentage in Baseball?

bmcent1 courtesy of Canva.com Two pieces of information are required in order to compute an individual’s slugging percentage: the total number of at bats the player has had and the total number of bases he has amassed. The slugging percentage formula is rather straightforward, and it is derived by dividing the total number of bases scored by the total number of at bats taken. Total bases are calculated by taking a batter’s total number of hits and adding one additional base for each double, two more bases for each triple, and three additional bases for each home run.

- One important point to keep in mind while calculating slugging % is that it only considers legitimate at bats and not unauthorized at bats.
- Bases on balls (walks), hit-by-pitch, sacrifice bunts, and sacrifice flies are all deleted from the at bat ledger for the sake of keeping track of the number of at bats.
- For practice, let’s look at how to compute a hitter’s slugging percentage: Consider the following scenario: a hitter has 235 plate appearances, but has only walked 20 times and has been hit by five pitches.
- Due to the omission of the last four columns (20+5+5+5), the number of at bats for the batter will be 200 instead of 200+5.
- To calculate total bases, start with the 60 hits and then add 10 for doubles (one base for each), another 10 for triples (two bases apiece), and 30 for home runs to get the total (three bases each).
- Finally, if you split 110 total bases by 200 at bats, you get a slugging percentage of 0.55, which is a good result.

It will be expressed as.550 because that statistic is typically always written with three decimals, which means that our sample batter will average.55 total bases per at bat on average. The question is whether that is a reasonable number or not.

## What Is a Good Slugging Percentage in Baseball?

The fact that slugging % is a rate statistic means that it is subject to up-and-down variations in Major League Baseball as the league’s conditions change. It is possible that these changes will take the form of a changed composition of the actual baseball, regulation changes, new ballparks (with different dimensions), altering trends in pitcher use, or even weather that is poorer than typical throughout the season. Despite this, there is a very well-defined threshold for what constitutes a “good” slugging percentage.

- Similarly, heading towards the extremes, a slugging percentage of.350 is considered bad, while a slugging percentage of.650 is considered excellent.
- On the opposite end of the scale, 119 hitters have produced a slugging percentage below.350 since 2005, which is the most recent period available.
- For example, eight players have had a slugging average greater than.650 in a season since 2005.
- The opposite is true for the 119 guys who batted below.350 in a season; just one of them, Luis Castillo, managed to bat above.300 in 2009, batting.302 as a result of his only 16 extra-base hits for the whole season.
- Another interesting fact about that ranking is that only 15 of the 119 players hit 10 or more home runs that season, with no one reaching more than sixteen.

## History of Slugging Percentage

Yobro10, courtesy of Canva.com However, even though it is a relatively new statistic when compared to many of the more established metrics, slugging percentage has been in widespread usage for several decades. The term “total bases average,” which is a forerunner to slugging %, was first used in 1867 by Henry Chadwick to describe a player’s total bases per game. The current slugging percentage, which is calculated based on total bases per at bat rather than total bases per game, became an official National League statistic in 1923 and an official American League statistic in 1946.

Chadwick also pointed out that many hits in those days were exacerbated by errors because fielders did not wear gloves at the time.

Since one of the earliest documented mainstream uses of slugging percentage was on the back of Ralph Kiner’s 1952 Bowman baseball card, which noted that he had been the National League leader in slugging percentage the previous year, popular usage would be decades away.

Due to the fact that slugging % is now a widespread phrase in the baseball language, you’ll be able to tell more accurately when you see it on a player’s stat line whether the player is more of an average batter, or more of an elite slugger.

## Career Slugging Percentage Leaders

In terms of career slugging percentage, the following are the top five:

- Joe DiMaggio had a career slugging percentage of.5821, while Babe Ruth had one of the best in baseball history at.6897. Ted Williams had a career slugging percentage of.6338, while Lou Gehrig had one of the best at.6324. Jimmie Foxx has one of the best in baseball history at.6093, while Barry Bonds has one of the best at 6069. Hank Greenberg has one of the best in baseball history at

## What Is On Base Percentage?

When a hitter makes it to base more than once per plate appearance, this is known as the on base percentage (OBP). It is possible to get on base % by counting walks, hits, and hit-by-pitch, but it does not include errors, fielder’s choice, dropped strike three, fielder’s obstruction, catcher’s interference, and sacrifice bunts, among other things.

## Odds and Ends About Slugging Percentage

- Barry Bonds established the record for the greatest single-season slugging percentage in 2001 with an.863 mark. Bonds amassed 411 total bases in only 476 at-bats that season, including a Major League-leading 73 home runs, which set a new record for the most in a single season. Additionally, Bonds’ batting average for the season was.328, shattering Babe Ruth’s 81-year-old single-season record of.847, which had been held since 1920. Bonds and Ruth are the only men to have achieved the top six slugging percentages in a season, with each of them claiming three of those illustrious campaigns. They are also the only players in Major League Baseball history to have a slugging percentage greater than.800 in a single season, with each of them accomplishing this feat twice
- The highest single-season slugging percentage for a team in history is.495, achieved by the 2019 Houston Astros, who hit a combined total of 288 home runs. Additionally, the 2019 Minnesota Twins and 2019 New York Yankees both posted.494 and.490 batting averages, which were the second and fourth greatest records in Major League Baseball history, respectively. Because they had the greatest batting average of the three teams, the Astros had the highest batting average, hitting.274
- While the Red Sox had the lowest batting average, hitting.238.

### Related Articles

- Hits in Baseball (1B, 2B, 3B, HR)
- The Ultimate Resource on Hits in Baseball (1B, 2B, 3B, HR)
- What Is a Pinch Hitter in Baseball and Why Do They Exist? A Guide to the Rules and Usage
- A Detailed Guide to the Materials Used to Make Baseball Bats
- What is a Double Switch in Baseball
- What is a Designated Hitter in Baseball

## Slugging percentage

Barry Bonds now owns the Major League Baseball record for the greatest slugging percentage in a season (.863). In baseball statistics, slugging percentage (sometimes known as slugging percentage or SLG) is a measure of a batter’s power. It is computed as the sum of all bases divided by the number of at bats. SLG = (s + 2d + 3t + 4hr) / (s + 2d + 3t + 4hr) SLG is calculated as (h + d + 2t + 3hr) / AB, where AB is the number of at-bats for a specific player and s, h, d, t, hr are the number of singles, hits, doubles, triples, and home runs for that player, respectively.

The phrase “slugging percentage” is a misnomer since it refers to a weighted average rather than a percentage.

It took 458 at-bats for him to get 172 hits, which consisted of 73 hits (one for each at-bat), 36 doubles, nine triples, and 54 home runs, for a total of 388 bases (73 for one, 36 for two, nine for three, and 54 for four).

Babe Ruth led the league in slugging average the following year, and those marks stood for 80 years until 2001, when Barry Bonds hit 411 total bases in 476 at-bats, raising his average to.863, a mark that has stood unbroken since.

## Slugging average’s significance

Although it was initially used in baseball many years ago, the slugging percentage received new relevance when baseball analysts found that when paired with on-base percentage (OBP), it provided a highly accurate representation of a player’s total performance. Branch Rickey devised a precursor meter in 1954, which is now known as the Branch Rickey metric. Rickey proposed in Life Magazine that combining on-base percentage (OBP) with what he dubbed “extra base power” would provide a more accurate estimate of player performance than traditional Triple Crown data.

According to Allen Barra and George Ignatin, they were among the first to combine the two modern-day statistics, multiplying them together to generate what is now known as “SLOB” (Slugging On-Base), which stands for Slugging On-Base.

In 1984, Pete Palmer and John Thorn devised what is perhaps the most widely used method of combining slugging and on-base average: the on-base percentage system (OPS).

Despite being less precise than SLOB and Runs Created, OPS is relatively simple to compute and has emerged as the unofficial shorthand for player assessment in recent years, despite its lower accuracy.

## Sources

We rely on the generosity of our readers. If you make a purchase after clicking on one of our affiliate links, we may receive a commission. In addition, we get commissions from eligible Amazon sales because we are an Amazon affiliate. It is becoming increasingly apparent to baseball fans across the world that the game they have learned to love over the years is changing significantly. A game that was formerly dictated by what transpired on the field is slowly but steadily shifting to become increasingly reliant on statistical analysis and analysis of data.

- A hitter’s output was once measured by his batting average and home runs, and pitchers were assessed by their wins and earned run average.
- In today’s game, knowing baseball statistics has never been more important, and understanding what those numbers imply is essential to comprehending the game.
- The slugging percentage of a batter is a statistic that is used to assess the power output of a hitter.
- In a situation when all hits are equal, slugging percentage lends greater weight to extra base hits than batting average.

## An Example on How to Caculate Slugging Percentage (SLG)

Here is an example using two fictitious players, designated as Player A and Player B.

AB | H | 1B | 2B | 3B | HR | BA | SLG. | |

Player A | 100 | 32 | 25 | 5 | 1 | 1 | .320 | |

Player B | 100 | 25 | 10 | 8 | 7 | .250 |

For the sake of simplicity, we will assume that both players have precisely 100 at-bats (AB). In this example, Player A has more hits (H) than Player B, resulting in a better batting average (BA) for Player A. If you want to know what their slugging percentage is, you may apply the following formula: SLG is equal to 1B(1) + 2B(2) + 3B(3) + HR(4) / AB. Because the numerator in this formula represents the total number of bases, all singles are multiplied by one in the denominator. Doubles are multiplied by two, triples are multiplied by three, and home runs are multiplied by a factor of four.

AB | H | 1B | 2B | 3B | HR | BA | SLG. | |

Player A | 100 | 32 | 25 | 5 | 1 | 1 | .320 | .420 |

Player B | 100 | 25 | 10 | 8 | 7 | .250 | .540 |

Because he has more hits than Player B, Player A has a better batting average than Player B. It’s important to remember that batting average treats all hits equally. Player B, on the other hand, has a better slugging percentage than Player A, owing to the fact that he has more extra base hits, particularly home homers. This does not necessarily imply that Player B is a better hitter than Player A, but it does imply that he has a higher power productivity than the former.

Player A may receive more hits, but Player B has a better chance of doing more damage at the plate. You may watch this video to learn how to calculate slugging % in a more in-depth, yet still simple to understand manner.

## The History of Slugging Percentage

The slugging % has been around since the early 1950s, however it took some time for the statistic to achieve prominence in the sport of baseball. The former Los Angeles Dodgers executive Branch Rickey is not only credited with helping to break down the color barrier in Major League Baseball by signing Jackie Robinson, but he is also credited with developing the formula that is now used to calculate a hitter’s slugging percentage. Rickey, on the other hand, cannot be attributed with the discovery of this statistic on his own.

Roth and Rickey came up with the term “Extra Base Power” (EBP) to describe a more accurate manner of evaluating a hitter’s output at the time.

This statistic would subsequently be known as slugging percentage, and it achieved widespread recognition as a result of Bill James’ SABRmetrics, in which he utilized it to build his own calculation known as “Runs Created,” which became popular (explained later).

## How Slugging Percentage is Used to Make Decisions

A club’s slugging percentage may be utilized in a variety of ways to assist coaches, scouts, and executives in making decisions — whether they be personnel or in-game decisions — that will help them put together the finest baseball team possible on the field. In the video included in the “Example” section above, the coach discusses how slugging percentage may be utilized to determine how to arrange a batting lineup. The players with the greatest slugging % should be assigned to the positions in the lineup where the coach wants his most potent power threats to be found, and vice versa.

A more sophisticated application of slugging percentage is the calculation of a player’s on-base percentage (OPS) (on-base plus slugging percentage).

Let’s go back to Players A and B and determine their overall point differential.

PA | AB | H | BB | HBP | BA | OBP | SLG | OPS | |

Player A | 115 | 100 | 32 | 10 | 5 | .320 | .408 | .420 | .828 |

Player B | 115 | 100 | 25 | 13 | 2 | .250 | .347 | .540 | .887 |

Player A’s OBP and SLG (.408 +.420) were simply combined together, whereas Player B’s OBP and SLG (.347 +.540) were added together to obtain their OPS. As you can see, Player B is still somewhat more important than Player A in terms of getting on base and displaying power when comparing their on-base percentages and on-base percentages. (For more information on on-base percentage, see the article “What is a Good On-Base Percentage (OBP) in Baseball” for further information.) It is possible for professional sports recruiters and executives to utilize this statistic to assess a player’s prospective effect on their respective teams.

Another even more complex application of slugging percentage is found in the Bill James’ Runs Created method, which is frequently employed by professional teams when making personnel choices (referenced earlier).

In this case, the formula is as follows: /= New Runs Have Been Created Let’s also compute the Runs Created for Players A and B for the sake of completeness.

PA | AB | H | BB | HBP | TB | BA | OBP | SLG | OPS | |

Player A | 115 | 100 | 32 | 10 | 5 | 42 | .320 | .408 | .420 | .828 |

Player B | 115 | 100 | 25 | 13 | 2 | 54 | .250 | .347 | .540 | .887 |

Player A:/= RC/= RC/= 17.16 Player B:/= RC/= RC/= 17.16 Player B:/= RC/= RC/= 14.61; Player A:/= RC/= RC/= 14.61; Player C:/= RC/= 14.61; This demonstrates how much more complicated analytics may be, as well as how organizations who are led by SABRmetrics are more inclined to prioritize Player A above Player B. The slugging % has established itself as a metric that is more useful than the batting average for those in charge of making in-game and personnel decisions, regardless of how it is calculated.

## Slugging Percentage Records

Dennis Sylvester Hurd captured this image. The following are the top five lifetime slugging percentage leaders in the history of Major League Baseball:

- Babe Ruth had a.689 batting average
- Ted Williams had a.633 batting average
- Lou Gehrig had a.632 batting average
- Mule Suttles had a.617 batting average
- Turkey Stearnes had a.616 batting average.

Baseball players Babe Ruth (689), Ted Williams (633), Lou Gehrig (632), Mule Suttles (617), Turkey Stearnes (616), Babe Ruth (689), Ted Williams (633), Babe Ruth (632), Ted Williams (633), Babe Ruth (632), Ted Williams (633), Babe Ruth (632), Ted Williams (632), Babe Ruth (632), Ted Williams (632), Lou Gehrig (632), Babe Ruth (632)

- The following players had a.974 batting average: Josh Gibson (1937), Mule Suttles (1926), Charlie Smith ( 1929), Josh Gibson (1943), Barry Bonds (2001), and Mule Suttles (2001).

As can be seen from this list, several of these players achieved these achievements during years when slugging percentage was not even taken into consideration. Fortunately, baseball historians have gone back in time and given them the recognition they rightfully deserve. In the Major League Baseball (MLB), there have only been four seasons in the previous thirty years in which the league’s slugging percentage as a whole fell below.400. The slugging percentage for this season is currently.402, which is a decrease from the slugging percentage for the last complete Major League season, which was.435, which was in 2019.

This might be owing to the fact that pitchers have been more dominating in recent years.

## Frequently Asked Questions

In baseball, the slugging percentage is intended to measure a hitter’s ability to generate power when the ball enters the field of play. Walking and hitting by pitches are important statistics to track, but they do not reveal a player’s power potential. This was the impetus for the creation of OPS.

### Do professional scouts use slugging percentage in drafting players?

College players’ slugging percentage will very certainly be taken into consideration when determining whether or not they are worthy of being selected by the major leagues in the draft. It is possible that high school statistics will not be taken into consideration as much when picking high school athletes since they are less dependable.

### Is it possible for a slugging percentage to be over 1.000?

Yes, it is feasible for a player to slug more than 1.000 in a single game. The majority of a player’s hits would have to be extra-base hits in order for this to be possible.

### What is a perfect slugging percentage?

A perfect slugging percentage is equal to 4.000 percent. In order to achieve this, a player must never be struck out and must only hit home runs on the season. This is practically difficult to achieve during the course of a season’s worth of games.

Also see: How to Clean a Baseball Cap with Cardboard Bills for more information. The 5 Most Effective Pocket Radar Guns A high school baseball season lasts for around six weeks. What is a Walk-Off Home Run, and how does it work? (Explained)

## Slugging percentage – BR Bullpen

The slugging percentage (abbreviated as SLG and sometimes known as the slugging average) is the number of total bases divided by the number of at bats in a game. It has the following formula: (+++)/At bats are distinct from plate appearances. (+++)/At Bats is a formula that is equivalent. This method is less straightforward, but it is frequently more handy because assingles are not always provided (although they could easily be deduced). The number of singles may be calculated using the following equation, because they are just hits that do not result in extra bases.

All-Time Leaders | |||
---|---|---|---|

Span | Player | Total | Notes |

Career | Babe Ruth | .690 | |

Season | Barry Bonds | .864 | 2004 |

The SLG+ statistic, which is an adjusted slugging percentage that accounts for the stadium and league that the player played in, is another useful statistic. Aside from that, the number is “normalized,” such that the median is 100 and the scores that are greater than average are over 100. SLG+ is calculated using the formula SLG+ = 100*(SLG/lgSLG), where lgSLG is the league average for the year in question.

## How to Calculate Slugging Percentage

Documentation Download Documentation Download Documentation While a home run counts the same as a single in terms of batting average, slugging percentage takes into consideration the actual number of bases that are scored. However, despite its name, this statistic is really an average rather than a percentage. A player who has a high slugging percentage is one who scores a high number of bases per opportunity at the plate.

## Formula Cheatsheet

- Slugging Percentage (SLG) is calculated as follows: Total Bases x At Bats
- In baseball, total bases are equal to the sum of all singles plus two doubles plus three triples plus four home runs. In the alternative approach, total bases are calculated as follows: Hits + Doubles + (2 x Triples) + (3 x Home Runs)

- 1 Recognize the importance of slugging percentage. This statistic, which is also known as slugging average, SA, or SLG, represents a player’s average number of bases per bat. It is reasonable to assume that the typical outcome for a player with a (unrealistic) slugging percentage of 1 was a single.

- This only counts the amount of bases gained by hits, not the number of bases gained through walks or being hit by a pitch. It is more accurate to estimate offensive power if the bases are not taken into consideration because they are beyond the control of the hitter.

- 2 Determine the total number of singles. Singles are not included in the majority of player statistics, however it is possible to determine this from other statistics. First, combine all of the hits that aren’t singles together, such as home runs, triples, and doubles. To find the number of Singles, subtract your answer from the total number of Hits.

- For example, Willie McCovey’s career statistics include 521 home runs, 46 triples, and 353 doubles, for a total of 920 points. Calculate the number of singles by subtracting 920 from his total career hits (2211), which is 1291.

- Example: Willie McCovey has 521 home runs, 46 triples, and 353 doubles in his career, for a total of 920 points. Calculate the number of singles by subtracting 920 from his total career hits (2211), which yields 1291.

- William McCovey collected a total of 4219 bases, which is equivalent to (1291) + (2 x 353) + (3 x 46) + (4 x 521) = 1291 + 706+ 138+ 2084 = 4219 bases total.

- 4 Divide your answer by the number of at bats. The slugging percentage is calculated by dividing the total number of bases by the total number of at bats.

- Considering Willie McCovey had 8197 at bats during his career, his career slugging percentage is 4219 divided by 8197 = 0.5147. (rounded to 0.515). With a bit more than one base on every two at bats, he was able to put together an impressive stat line

- 1 Use a quicker approach to determine the total number of bases. The approach described above is the simplest to comprehend, but it necessitates the use of additional arithmetic to determine the number of singles. Here’s a method to bypass that step and instead determine the total number of bases by utilizing Hits: Total bases are calculated as follows: hits + doubles + (2 x triples) + (3 x home runs).

- All of the singles are taken care of by one base every hit, which is why it works. Due to the fact that this also gives one base for each double, you simply need to add one additional base for each double to get at the final result. Similarly, for triples and home runs, add two additional bases and three further bases respectively.

- 2Divide by the number of at bats. As previously stated, the slugging percentage is equal to the total bases divided by the total number of at bats. Advertisement

- Adding Slugging Percentage to On Base Percentage is a good way to start. The resulting statistic, On Base Plus Slugging (OPS), takes into consideration the most essential offensive statistics. Baseball statistics do not believe this to be an accurate measure of offensive power, but it is a fast and simple method to compare offensive power.

- OPS+ is a less widely used statistic that takes into account the league and the park where the player plays. The formula for calculating OPS+ changes every year, with 100 being the league average.

- 2 Adjust the slugging percentage to the appropriate league. This statistic was created just for the baseball encyclopediaTotal Baseball and is rarely seen anywhere else in baseball. If you want to compare players from various years, this is a more accurate method to use, although it may be difficult to find the information you need to compute it:

- Adjusted production (APRO) is calculated as follows: (On Base Percentage / League OBP) + (Slugging Average / League SA) – 1
- (On Base Percentage / League OBP) = (On Base Percentage / League OBP) + (Slugging Average / League SA) = (On Base Percentage / League OBP) + (Slugging Average / League SA) = (On Base Percentage / League SA) + It is the average of all players’ stats for the whole season that is used to calculate the League statistics. The statistics are occasionally adjusted to account for variances across parks, as well as other factors.

Create a new question

- Question The first year of high school for my kid has seen him bat 78 times, with only two strikeouts in that time. Is there any significance to this? That’s a really high strikeout %, so he’s doing an excellent job right now. Nevertheless, when it comes to batting or slugging percentage, strikeouts are treated exactly the same as any other type of out. Question Why not simply divide the number of times a hitter reaches base by the number of at-bats? That will work provided you know the player’s total plate appearances, rather than just his “official” at-bats
- Otherwise, it will not work at all. Question What is the best way to determine out base percentages? The following formula should be used: the total of the player’s hits plus the number of times he walked plus the number of times he was hit by a pitch divided by the sum of the player’s official at-bats plus his walks plus the number of times he was hit by a pitch plus his sacrifices (bunts and flies)

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

## Video

- This statistic, like many others in baseball, is frequently shown without a decimal point. An SLG of 300 indicates that the team is averaging 0.300 bases per at bat, not three hundred. At bats do not include all plate appearances
- Rather, they include just those in which the hitter attempts to advance to the next base. It makes no difference whether or not an individual gets a walk or makes a sacrifice play
- A player’s slugging percentage remains same.

Thank you for submitting a suggestion for consideration! Advertisement

## About This Article

Summary of the articleXThe following formula can be used to compute slugging percentage: SP is calculated as total bases minus at bats, where total bases is the number of bases the player moved as a result of hits and at bats is the number of times the player was up to bat. To get the total number of bases, apply the following formula: total bases = hits + doubles + (2x triples) + home runs (3x home runs). Then, using the value you obtained, enter it into the original formula and solve for the player’s slugging % to determine his or her performance.

Did you find this overview to be helpful?

## Did this article help you?

“Today, they have outrageous batting averages, are unable to bunt or steal, are unable to hit-and-run, are unable to hit a sacrifice fly to the opposite field, and are therefore unable to be considered ballplayers. Where has our moral compass gone? Where’sbaseball?” – Al Stump, Ty Cobb’s official biographer, has attributed this quote to him. Baseball has not always been a contest of strength. In the past, the most talented ball players were those who excelled at a variety of other activities.

- When Ty Cobb was inducted into the Baseball Hall of Fame, he never hit more than twelve home runs in a season.
- At the end of his baseball career, a young man known as George Herman “Babe” Ruth, Jr.
- Baseball has evolved over the years.
- What exactly is a slugger these days, and how does one define one?
- Is that even what it is referring to?
- In this article, I will attempt to simplify the concept of slugging and apply it to the 2012 Astros.

Disclaimer: I do not pretend to be a statistician. The fact that I have purposely overlooked or skimmed over a million minor nuances in the goal of providing a clear picture is not by chance. It’s a matter of perspective.

### Slugging Percentage

The “slash stats” have become familiar to the majority of baseball fans at this point. In baseball, slash stats are often represented as.260/.360/.460, where the first number represents Batting Average, the second represents On-Base Percentage, and the third represents Slugging Percentage. In baseball, slash numbers are typically expressed as.260/.360/.460. The meaning of the first two sentences is self-evident to me. Third, I’m not entirely sure what I want to do with it, and I’ve just lately started thinking about it really.

- To which a perceptive listener would respond, “Wonderful, but what does it mean toslug?” Fortunately, slugging percentage (also known as SLG percent, in the sake of protecting my typing fingers) is a rather straightforward concept to grasp and understand.
- As a representation in middle school mathematics, the following is correct: The total bases earned by a hitter are the total amount of bases earned by the batter for all hits.
- Double: A total of two bases are earned.
- Home Run: Four extra bases are earned.
- You can compare one player’s SLG percent to the other players’ SLG percent since the circles in the graphic are to scale (though I won’t tell you what scale I’m using to maintain some surprise).
- It shouldn’t come as a surprise that Carlos Lee and J.D.
- Slugging Percentage is just that straightforward!
- The typical player will earn 42.7 percent of a base by hitting for every at bat, which translates to 42.7 percent of a base for every at bat.
- Every 2.4 At Bats, a league-average hitter (.427 SLG percent) will gain one base on a hit, for a total of two bases every game.
- The lower the numbers on this chart, the better.
- Once again, we observe that Lee and Martinez require the fewest amount of at-bats to reach first base, but Schafer and Quintero require the most number of at-bats.

A long time ago, slugging percentage (SLG percent) was the statistic of choice for evaluating a player’s slugging power. However, as more geeky individuals put their collective brain to the sport, it became apparent that other measures assessed slugging ability a bit better.

### Isolated Power

The term “slash stats” is familiar to most baseball fans by this point. In baseball, slash stats are generally represented as.260/.360/.460, where the first number represents Batting Average, the second represents On-Base Percentage, and the third represents Slugging Percentage. In baseball, slash numbers are often expressed as.260/.360/.460. Both of the first two sentences are self-explanatory in their meaning to me. Third, I’m not quite sure what I’m thinking about, and I’ve only lately began to give it considerable consideration.

- “That’s fantastic, but what does it mean to slug?” a perceptive listener could inquire.
- The Slugging Percentage (SLG percent) is the number of Total Bases earned per At Bat in a given season or season period.
- earned two bases as a result of a single play Earned three bases on the triple: 4th base is earned with a home run As seen in the picture below, the 2012 Houston Astros are represented by their respective SLG percentage.
- Later in this essay, I’ll go into the specific Slugging Percentage figures I utilized for this purpose.
- Martinez have the greatest SLG percent on the squad, and that Jordan Schafer and Humberto Quintero have the lowest SLG percent.
- Approximately.427 is the league-average slugging percentage for 2011.
- While obviously not achievable in a single At Bat, the number may be reversed to determine how many At Bats it takes for a player to reach second base.
- It is shown in the chart below how many At Bats each 2012 Astros batter needs to earn one base in order to reach the designated spot.
- According to SLG percent, this chart is designed to provide a visual indication of who the more effective sluggers are.

In baseball, slugging percentage (SLG percent) was the standard metric for a long time, but as more and more geeky individuals put their combined brains to the sport, it became clear that alternative ways measured slugging ability a bit better than SLG percent.

### Combining the Data

It is possible to notice the difference between At Bats per base earned and At Bats per additional base earned by looking at the following chart, which is a mix of the others above. This diagram depicts the players on the squad that are considered “singles hitters”: Schafer, Quintero, Castro, Altuve, Bogusevic, and Paredes. It is possible to alter this data once more in order to determine what proportion of Total Bases Earned are extra bases earned as a result of extra base hits. By combining ISO and SLG percent, this is probably the most accurate approximation I can come up with of who the Astros’ sluggiest players are.

In the event that a manager wanted to rank players based on who had the most power (while disregarding batting average and on-base percentage, which I would not advocate), the top “power hitters” on the Astros would be as follows:

- Jordan Schafer
- Chris Snyder
- Jed Lowrie(tie)
- Matt Downs(tie)
- Carlos Lee
- Chris Johnson
- J.D. Martinez
- Brett Wallace
- Jose Altuve
- Brian Bogusevic
- Jimmy Paredes
- Jason Castro
- Humberto Quintero
- Jordan Schafer
- Jack Cust

### Just for Fun

I put together one last chart to have a look at some more heavy hitters. This list contains two Hall of Famers, a player who most likely should be in the Hall of Fame, three players who most likely will be in the Hall of Fame, as well as two former Astros who are intriguing cases. By today’s standards, Ty Cobb, although having a slugging percentage that would have been regarded good in any period, was not a particularly powerful hitter. Just like Ichiro, he hit a ton of singles during his career, and he has the greatest lifetime batting average of all time.

- Babe Ruth is included solely for the purpose of comparison, as no other player, not even Barry Bonds, comes close to his SLG percent and ISO.
- Bagwell and Biggio are included because, if I hadn’t, someone would very certainly have inquired as to their inclusion.
- As we all know,Angel Sanchez is a really bad hitter, and we all seen him hit nothing but singles last season.
- Sanchez has the least amount of power out of all the guys I looked at for this post.
- Even though Keppinger walks a little less, comparing the two players’ power figures reveals just how baseball’s attitude towards batters has evolved over the years.

The presence of a high-average player like Keppinger in the 1970s would have ensured that he would have played every day for most managers; but, due to a lack of power now, he struggles to obtain even utility assignments.

### Conclusion

Since Ty Cobb played, baseball has evolved, and slugging has risen to become the most important ability a batter can possess. Considering what has been shown so far, the Astros will need to make moves in order to acquire players that possess this ability if they are to catch up with the rest of baseball’s offensive.

## Definition of slugging average

This indicates the grade level of the word based on its difficulty. This indicates the grade level of the word based on its difficulty. noun Baseball. Batter effectiveness is calculated by dividing the total number of bases reached by hitting by the number of official times at bat and rounding the result to three decimal places. Batter effectiveness is a measure of a batter’s effectiveness at making base hits. A batter who hits 275 total bases in 500 at-bats has a slugging average of.550, which indicates that he is a good hitter.

In effect, this exam will determine whether or not you possess the necessary abilities to distinguish between the terms “affect” and “effect.” Despite the wet weather, I was in high spirits on the day of my graduation celebrations.

## Origin ofslugging average

The first recordings were made between 1965 and 1970.

## Words nearbyslugging average

Slugabed, slugfest, sluggard, sluggardly, slugger, slugging average, sluggish, sluice, sluicegate, sluiceway, sluggardly, slugger, slugging average, sluggish, sluitDictionary.com Unabridged Random House, Inc. 2022, based on the Random House Unabridged Dictionary, Random House, Inc.

## Words related toslugging average

- I’ve played over a thousand holes and my average stroke rate each hole is less than four. According to the manufacturer, the vaccination has an average effectiveness of roughly 60%. The average age of her clients ranges from 45 to 65 years old, with the youngest being 18 years old and the oldest being in her 80s. Ramos was 38 years old, making him nearly two decades older than the usual recruit
- And

- The reason for this is because Murthy feels that gun violence, which claims the lives of an average of 86 Americans per day, is a public health concern
- Yet, I do not believe that the average number of passengers on a matching route in our nation could be as low as twenty
- The ordinary speaker is often restricted to a single sort of voice, which he alters little, but it is not commonly concealed
- I would estimate that a peck of corn is roughly the average result of a day’s labor throughout this region
- Most likely, the ordinary citizen of three generations ago was completely unaware of the fact that he was a zealous individualist to the extreme. That same Goodell was an exceptionally intelligent individual, quick-witted and agile of tongue in comparison to the normal Englishman.