How To Throw A Cutter In Baseball

How To Throw A Filthy Cutter (10 Pictures Of Grips)

HomeArticles PitchGrips for Cutter Learn more about my pitchers’ exercise routines here. The proper method of developing functional strength should be used. Discover my pitching routines and throwing plans for athletes that are dedicated to their craft and refuse to accept defeat. More information may be found here. Do you have any experience throwing a cut fastball? Learn everything there is to know about throwing a cutter that is more than just “dirty” or “mean,” and which frequently entails embarrassment for the batter, in this article! is the source of this image.

In terms of description, the cutter may be characterized as a combination of half fastball and half slider that moves horizontally to the throwing arm side of the plate, or a ‘cut,’ and is hence known by the titles cutter and cut fastball.

FREE MONTHLY NEWSLETTER Sign up for my daily pitching tips email newsletter to receive exclusive tips and insights that are not available anywhere else on the web.

Cutter grip

So, what exactly is the secret to becoming a good cutter? Consider the proper way to grasp and throw the cutter in greater detail. is the source of this image.

  1. Apply greater pressure to the outside edge of the baseball by shifting your typical fastball grip slightly off center from its center position. As an alternative to throwing a slider, some pitchers choose to shift their thumb up and to the inside of the baseball. When thrown correctly, a cutter will have movement that is comparable to that of an aslider, but with sharper movement
  2. Similarly to how you would release a fastball, release the cut fastball. The wrist should not be snapped or turned in the manner of a curve or slider
  3. Instead, your arm action should match that of your fastball. As a result of applying pressure to one side of the ball, it should naturally generate the spin required to generate movement.

It is expected that the cut fastball would create a few inches of late movement when thrown correctly from a right handed pitcher, and that it will break away from right handed batters. The cutter’s delivery objective is to get the hitter to hit a groundout; therefore, don’t anticipate the cutter to be your strikeout pitch.

More images of cutter grips is the source of this image.

My favorite GIF of throwing a cutter

When you put everything together, it looks like this. Take a look at this fantastic cut fastball from pitcher Kenley Jansen: is the source of this image. I mean, it’s just plainwow, right? It may be difficult to see in this GIF, so give it a few seconds and pay attention to the tiny shift this 94 mph pitch makes as it darts away from Jean Segura’s position. That’s what I call an unhittable cutter.

Learn more about my workout programs for pitchers

When it comes to baseball, one of the most common myths is that playing the game keeps you in condition to pitch. That would be fantastic if it were true. It is not the case. Preparation is critical in order to go to the next level. Pitchers in the major leagues spend significantly more time preparing to prepare than they do actually pitching. You may learn more about my fitness and pitching programs for baseball pitchers of all ages if you feel that increasing your velocity will be vital to your future success.

What do you think?

Let me know if there are any cutter grips, tips, or methods that I’ve overlooked in the comments section.

Alternatively, perhaps you have an idea for how I might improve this post even further. In any case, please leave a remark and let me know. Next, check out this cheat sheet on pitching grips, which explains how to throw eight different baseball pitches.

How to Throw a Cutter

Welcome to the sixth installment of our “How to Throw” series! Cutters will be the subject of our last episode, which will include a discussion and analysis of them.

Overview of a Cutter

Cutter pitches are fastballs that are thrown at a high velocity and travel in a sharp, horizontal motion, often known as “cutting action.” They are also known as “cut-fastballs.” Because of its grip and release, this pitch type is comparable to a four-seam fastball. However, it varies from a four-seam fastball in that it has a little lower velocity and moves glove side instead of arm side when pitched. Backspin and gyro spin dominate a cutter’s spin pattern, with only a little amount of sidespin present in most instances.

This results in an increased velocity pitch that cuts rather than runs, resulting in a higher velocity pitch that cuts rather than runs.

Some pitchers employ a cutter as their primary fastball, while others utilize it as a putaway pitch, comparable to a breaking ball, or as a platoon neutralizer, depending on their situation.

How to Grip a Cutter

We have three major grip types for cutters in our grip tracker database, which you can find here. The “CT 1” machine, which is used by 80 percent of our athletes, is seen here. Grasping a cutter is quite similar to gripping a four-seam fastball in terms of technique. Using the index and middle fingers, the pitcher may give force to the baseball, resulting in increased velocity and spin. On top of the ball in this grip example, the fingers are close together, and the finger pads are squarely on the seams.

When combined with cutting action, this pitch provides vertical movement and cutting action at its very heart.

Our observations show that the majority of pitchers either place their thumb directly off-center or below the ball.

It is important to note that this grip does not apply to all situations; you should place your fingers in such a way that you are able to hold the ball comfortably in your hand.

How to Throw a Cutter

We have three basic grip types for cutters in our grip tracker database, and each has its own subset. The “CT 1” machine, which is used by 80 percent of our athletes, is shown in the illustration below. Cutter grips are comparable to the way a four-seam fastball is gripped. Baseballs are thrown with tremendous velocity and spin because of the force imparted by the index and middle fingers on the bat. Using this grip example, the fingers are positioned close together on top of the ball, with the finger pads being put squarely on the seams.

When combined with cutting action, this pitch provides vertical movement and cutting action at its foundational level.

In most cases, we observe pitchers place their thumb either straight off-center or below the ball when throwing.

It is important to note that this grip does not apply to all situations; you should place your fingers in such a way that you can comfortably hold the ball in your hand.

You should hold the ball with a considerable amount of pressure between your thumb, index, and middle fingers after you’ve found a comfortable grip for yourself.

Analyzing Cutter Movement

We can study the movement profile of our pitches with the help of aRapsodo software. Those cutters that are highlighted in brown show that they have a significant amount of vertical movement, that they are mostly located to the left of the y-axis, and that they have a modest amount of horizontal break. You’ll see that cutters are sandwiched between fastballs and sliders on the mound. The fact that this pitch type combines the characteristics of both those pitches makes intuitive sense. When a cutter has a high degree of run but only a little amount of lift, it is referred to as a “slutter.” This term is given to a pitch that possesses characteristics of both a slider and a cutter in equal measure.

Additional Cutter Grips and Cues

Additional cutter grips that our athletes have used in the gym are listed below in the table. CT 2, also known as the “Standard Between,” has a 2-seam orientation. Place the index and middle fingers in between the seams, slightly off-center, to create a snug fit. Very similar to CT 2, CT 3 uses the same orientation as CT 1, but the fingers are placed higher up on the ball and closer to the horseshoe. Once again, you’ll notice that the fingers aren’t in the middle of the ball in both of these examples.

“Focus on middle finger pressure,” “Think palm facing first base,” and “Think slider” are some other helpful cues.


This brings our “How to Throw” blog series to a close. We hope you liked each section and that you will use it as a guide to develop your pitching skills in the years to come. Keep in mind that the movement profile of each pitch will vary depending on a variety of circumstances. It is up to you to put in the time and effort to practice, understand the many adjustments that may be made, and continue to find what brings you the best success! Mike Tampellini contributed to this article. Learn how to throw a slider by reading this article.

Check out How to Throw a Changeup for more information.

Learn how to throw a four-seam fastball by reading this article.

What Is A Cutter Pitch In Baseball? [Filthy Fastball]

A cutter is also referred to as a cut fastball in some instances. Several alternative techniques of gripping a cutter are available to a pitcher. You may also look at our other articles on how to throw an eephus pitch and how to throw a sinker for further information. Using this method, you may expand the amount of pitches that are accessible to you!. The three cut fastball grip approaches will be discussed in detail later.

The Cut Fastball Grip

After mastering the cutter, you may practice throwing it with two different cutter grips: gripping like a two-seam fastball and gripping like a four-seam fastball.

Grip Like a Two-Seam Fastball

Begin by grasping the ball as if it were a two-seam fastball. Using your index and middle fingers, press the baseball’s two narrow seams together until it snaps together. Then, move the two index and middle fingers slightly off center. The pitcher must make certain that his or her fingers are generally near to one another. In addition, you may arrange your middle finger such that it runs parallel to the seam or you can allow the seam to go directly through the center of your index and middle fingers.

  • Move your thumb over so that it makes a circle with your middle and index fingers, then release your thumb.
  • For the sake of clarity, let’s look at an illustration of a clock.
  • Finally, make a tiny adjustment to your wrist in the direction of your thumb.
  • For right-handed pitchers, your wrist would shift somewhat to the left, whereas your wrist would travel slightly to the right.
  • frameborder=”0″ The following attributes are permitted: acceleration sensor, automatic playback, encrypted-media, gyroscope, picture-in-picture, and picture-in-picture.
  • “Wisecrack Edition” > “Wisecrack Edition”

Grip Like a Four-Seam Fastball

When you throw a four-seam fastball, you touch the ball four times in total — twice with the middle and index fingers, twice with the middle and index fingers, and once with the index finger. For starters, position the two fingers perpendicularly across the ball on the U-shaped seam, as shown in Figure 1. Second, move your fingers in the same manner as you would for a two-seam fastball. *** Maintain close contact between the fingers while sliding them to the right. As a bonus, apply extra pressure to the middle finger, which will be the last finger to make contact with the ball before releasing it.

Finally, make sure your thumb is in the appropriate place.

With addition, in this form of grip, you do not have to place the thumb in the same position as you would in the two-seam fastball version.

Obtain a grip that allows you to throw the cutter with the confidence of a professional pitcher.

How to Throw a Cutter

Listed below are recommendations for throwing a cutter, including the cutter grip, posture, and releasing. Pitchers in the league should release a cutter in the same manner as they would a fastball. When throwing a slider or a curveball, you should avoid snapping the wrists. In addition, your arm movement should be similar to that of a fastball delivery. It should result in natural spins being produced by your middle finger when you apply pressure to the outside of the ball with your index finger.

  • Always keep your throwing grips hidden until you are ready to release the ball when you are playing baseball.
  • Also, when you throw a sinker, make sure to completely extend your arm.
  • Check out this video to learn more about Mariano Rivera and to see him demonstrate his skills.
  • “Wisecrack Edition” > “Wisecrack Edition”

Throwing a Cutter – No Matter What Grip You Use

As a pitcher, you have a variety of grip options for your cutter. Regardless of whether you use a two-seam or four-seam fastball pitching approach, make sure you conceal your pitch with the glove. Do not show it to the batter since it will be simpler to forecast where the ball will land if he knows where it is going to. It is simple for a hitter to identify the pitch you are throwing since your middle and index fingers are close together and your thumb is off to the side. As a result, use caution.

  1. Avoid using any spin or snapping motions on your wrist when doing your motions.
  2. As the cutter pitcher, you should release the pitch by snapping your wrist down.
  3. The movement of a cutter is dictated by the arm side of the pitcher.
  4. Aside from that, the body crosses to the opposite knee to guarantee that the baseball is released at the optimum speed.
  5. allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture; picture-in-picture” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; picture-in-picture” allowfullscreen “The Dark Knight Rises: What Went Wrong?” is the title of the article.


Different gripping techniques are available to pitchers for their cutter. The glove should be used to conceal your pitching motion, whether you are utilizing a two-seam or a four-seam fastball. Do not show it to the batter since it will be simpler to forecast where the ball will land if he knows where it is going. Because your middle and index fingers are close together and your thumb is off to the side, it is simple for a hitter to identify your pitch. As a result, proceed with caution! Keep in mind that you are throwing a fastball pitch when you throw a cutter as a pitcher when you throw one.

  • It’s also important to have the same arm speed as a two-seam fastball (or a four-seam fastball).
  • Use your middle finger to impart more pressure to the ball, creating a tiny spin that will cause the ball to travel from side to side late in the stroke.
  • When it comes to throwing a cutter, professional pitchers follow through with the pitch until the arm is fully extended.
  • To understand how Mariano Rivera throws his cutter, watch this video.

“Wisecrack Edition” is an abbreviation for “Wisecrack Edition.”

How did Mariano Rivera throw his cutter?

Rivera is well-known for his cut fastball pitch, which has a vicious cut to it. He grasped the ball by bringing his middle and index fingers together across the seam of the ball. If you want to have a flawless pitch, Rivera recommends applying pressure on your middle finger. The cut fastball pitch must have a four-seam fastball rotation, and you do not need to hold the pitch too tightly to get it to work. When done correctly, you will be able to throw the cutter like Mariano.

Is a cutter the same as a two seam fastball?

A cutter may be gripped in the same way as a two-seam fastball. The pitch, on the other hand, breaks in the opposite direction of a two-seam fastball, and the breaking action occurs late in the game as the ball approaches home plate.

What type of pitch is a cutter?

A cut fastball is a type of fastball pitch that falls within the category of fastball pitches. It travels at a high rate (95 to 105 miles per hour), similar to that of a fastball. Apart from that, a cutter ensures that the gripping style of four-seam and two-seam fastballs is maintained.

Is a cutter safe to throw?

Yes, throwing a cutter is risk-free for both young and experienced pitchers. With this technique, you will not injure your wrist or fingers, which are the most engaged portions of your body while throwing anything like this. Simply mastering the proper technique for releasing the cutter will ensure that your hand is protected.


Getting the hang of how to throw a cutter is important. When you practice, Mariano Riveracan become second nature. Once you have mastered the gripping approach and are comfortable with and confident in your ability to release the ball accurately, you will love this style of pitching. You will rise to the top of the baseball leagues as one of the finest pitchers if you use it. This page was last updated on

How to Throw a Cutter Like the Big Leaguers

While I’m confident that you’re a terrific fastball pitcher, I’m also confident that you’re struggling to locate a solid change-up to combine in with your fastball. Time to brush up on your cutter-throwing skills. The pitch that Mariano Rivera (the legendary reliever of the New York Yankees) throws to get hitters out has caught your attention, and you want to learn more about throwing a cutter like his to get batters out. With his level of accomplishment, I can’t say that I blame you. The cutter, often known as a cut fastball, is a fastball that has movement, rather than being a breaking ball.

See also:  What Is Slugging Percentage In Baseball

A well-thrown cutter can be hit with the bottom of the bat by hitters, although this is not always the case.

Mariano Rivera’s Favorite Pitch is a Cutter

Mariano Rivera is known for throwing a vicious cutter, which is one of the reasons he is heading to the Hall of Fame. And his cutter is so superb that he can throw it right away when he first appears on the scene. Most pitchers must first develop their fastball before incorporating the cutter into their repertoire. For around 58 feet, the cutter seems to be the same as a fastball, causing the batter to load up and swing just as the baseball dips down and away from or into them. It’s a swing and a miss, or a harmless dribbler, depending on your perspective.

It’s possible that the fastball is functioning and that you are hitting your targets.

A decent cutter, or even a strong change-up, will be most successful during this time period. As previously said, the cutter seems to the batter to be a fastball, and the late break gives him little time to make an adjustment to the pitch.

The Cutter’s Grip

A cutter or cut fastball pitching grip may be found in a variety of various variants. As is the case with most pitches, experimenting with different grips can help you learn how to throw a cutter effectively. Because the cutter is more similar to the fastball than any other pitch, it is best to begin by employing the four seam fastball grip, with the grip slightly off the center. In order to hit the baseball properly, your thumb should come up little on the inside of the baseball, and your index and middle fingers should spin slightly to the outside.

If you are not obtaining any breaks with this grip, then slide the thumb back down to the ball’s center position right under it.

Any amount of twisting will result in the pitch becoming a slider.

The Cut Fastball Grip

Most of the time, when people talk about how to throw a cutter, they assume that the phrases cut fastball and cutter are synonymous. However, there are some baseball fans who believe that a cutter fastball is thrown with a four seam fastball grip and a cut fastball is thrown with a two seam fastball grip, respectively. As a result, the cut fastball will be referred as as being thrown with the two seam grip. In the same manner as with the cutter, the grip is kept slightly off center and away from the body.

How to Throw a Cutter

The cutter’s arm action and arm speed are identical to those of a fastball in terms of speed and movement. You’re taking a good stride and letting the baseball fly as you cross the plate. Turn your wrist ever so slightly at the time of release, with the grasp slightly off center and pressure applied by the middle finger, to ensure a smooth release. It is through this tiny rotation of the wrist and off-center grip that a pitch with loads of velocity and a late downward break will be produced. Would you be interested in being the batter attempting to hit this?

Good luck, and put in the necessary effort.

Here Are All Our Pages on Pitching Grips

A cut fastball is one of those pitches in baseball that isn’t thrown very often, but you can tell when you see one because of the way it looks. It is likely that the batter’s swings will be ineffective since the pitch will tail off their hands. In the case of right-handed pitchers, the ball advances into left-handed hitters while moving away from right-handed batters. Is there a different grip for the cut fastball than for the fastball? The two-seam grip and the four-seam grip are two methods of throwing a cutter.

It’s still a fastball, mind you.

To begin throwing, grip strength must be strengthened, and the tendons in the elbow must be loosen before commencing a throwing regimen.

If you put pressure on your fingers, it’s possible that you’ll have problems with your elbow tendon, but don’t worry! Continue reading to find out how to throw a cutter in a number of different ways.

The Two Types of Cutter

Cutters are fastballs that are delivered at an angle to the center axis that depart from the normal pitching motion. A slider and a fastball are similar in that they are both quicker than other breaking pitches and move more sharply towards the conclusion of the pitch’s trajectory. When you grip the ball across the seams, it will shift as it travels down the road. The baseball tails about the 60-foot mark due to the distortion caused by the wind on the seams of the ball. Perfect for throwing a pitch.

The pitch is not intended to be a strikeout pitch, but rather to force the bat to make contact with the smaller area of the bat.

There are two different sorts of cutters: The key to success on this pitch, as with most others, is to maintain grip.

When pitching, the different types of cutters are distinguished by the seam number that is pressured during the pitching process.

How to Throw a Two-Seam Cutter

The two-seam cutter is thrown in the same manner as the two-seam fastball, but with a slightly different grip on it. It is referred to as a two-seam because only two seams are affected by friction during the pitching process. The ball begins to move as a result of the alteration in the gravitational influence. Mariano Rivera, one of the all-time great relievers in Major League Baseball history, was a master of the cutter. The following are his instructions on how to throw the two-seam cut fastball:

  • The point of the axis may be changed by using an adjusted grip. For example, instead of using the same grip as for the two-seam fastball, grasp the baseball such that there is a space between the ball and the palm of your hand. It will float instead of moving quickly when the ball is palmed. A floater will be smashed by the majority of hitters
  • Close the spread fingers on top of the ball– The spread fingers on top of the ball should be brought together. When the fingers are closed, the force from the pitch is concentrated on the side of the ball that has been closed. As the hand comes to a stop, the ball will be flicked by the fingers, which will cause the pitch to move. Prepare to throw the pitch by moving the fingers to the side. Once both fingers have been moved to the side and the distance between the ball and palm has been opened, you are ready to throw the pitch. Make use of your usual throwing motion–Throw the fastball at the hitter using your regular throwing motion. The ball travels sixty feet
  • Nevertheless, it should have travelled the final three or four feet in that time. The greatest cutters have the ability to rise or fall, but they are most typically found moving towards the batter.

Throwing the Four-Seam Cutter

Throwing the ball in a four-seam technique is the most effective approach to ensure that it travels in a straight path. That is, the ball should be gripped with the top fingers splayed and the horseshoe section of the seam passing between the top two fingers. The following are the proper ways to handle a four-seam cutter:

  • A fastball is gripped in the same way as a standard fastball in order to pitch as quickly and straight as possible. Using the four-seam grip, the ball rotates with the same amount of friction on the threads as before, allowing it to go straight. Moreover, it lowers the resistance of the wind and produces the ideal conditions for moving at the fastest possible speed
  • Move the seam between the fingers once the pitch has been held with the four-seam grip– Once the pitch has been held with the four-seam grip, move the ball slightly. The bend of the horseshoe form on the ball should be located between the fingers of the hand. Keep an especially close eye on the middle finger and apply more pressure there
  • Positioning your thumb at the bottom of the ball is important. Ideally, your thumb should be on the inside of the ball, and slightly cheated back. You will get more movement out of the ball if you apply more torsion to your hands and thumb when you flick the ball. The thumb grip is critical, as increasing pressure has a variety of effects on the pitching motion. Make use of your usual fastball throwing motion– Make use of your regular fastball throwing motion when throwing the pitch. The throwing action and making certain that there is no excessive movement employed during the release are important aspects of this pitch. A doorknob action may be devastating to a pitcher’s arm, especially when they are younger. When it comes to young athletes, use it carefully if at all.

When a Pitcher Might Throw the Cutter

Fastball grip similar to a typical fastball– A fastball is gripped in order to pitch as quickly and straight as possible. It moves straight because the four-seam grip allows you to turn the ball while maintaining a constant level of friction on your threads. Moreover, it lowers the resistance of the wind and produces the ideal conditions for moving at the quickest possible speed. Move the seam between the fingers after the pitch has been held with the four-seam grip– After the pitch has been held with the four-seam grip, move the seam between the fingers a little bit.

Keep an especially close eye on the middle finger and apply more pressure there.

You will get more movement out of the ball if you apply more torsion to it with your hands and thumb.

Make use of your normal throwing motion– Make use of your normal fastball throwing motion when throwing the pitch.

The throwing action and making certain that there is no excessive movement employed during the release are both important aspects of this pitching technique. A doorknob action may be devastating to the arm of a young pitcher. When it comes to young athletes, use caution if at all.

  • 0 – 2 pitch count
  • Runner on first and pushing double play
  • Runner on second and pushing double play

0 – 2 Pitch Count

With the pitch count at 0–2, a runner on first is attempting to force a double play.

Runner on First and Pushing a Double Play.

A cut fastball isn’t necessarily going to be a strikeout pitch, even if it looks like one. A weak hit is produced by the pitch as it goes towards the batter’s hands and is readily collected by the pitcher. Fastballs with little or no vertical movement are reserved for the very best cut fastballs. Because the hitter’s bat is still on the same plane as the pitch, moving horizontally implies that the batter may still make contact with the pitch.


If you have a decent fastball, you won’t need to worry about having a variety of pitches in your repertoire. The simple act of adjusting the grip will cause the ball to travel and tail in directions that will appear to be different pitches than your fastball. While it is not a strikeout pitch, it may result in easily retrieved balls that are great for double plays as well as harmless bouncers back to the pitcher if the batter is not careful. During the throwing motion, it is thrown by moving the fingers closer to the seams and exerting additional pressure while releasing.

Despite the fact that the movement of the ball is not always significant, it is sufficient to negate the power of the best hitter and provide a large number of easy outs for the middle infielders.

How to Throw a Cutter (3 Simple Methods)

It is a small modification on a two-seam or four-seam fastball, and it is frequently referred to as a “cut fastball.” For right-handed pitchers, the pitch goes from right to left, while for left-handed pitchers, the pitch moves from left to right. This may lead you to believe that it behaves similarly to a curveball, however the cutter does not have as severe a break as a curveball, and the break occurs much later than with a curveball. Furthermore, the pitch is delivered with mechanics that are more akin to those of a fastball than those of a curveball.

Due to the fact that it is thrown much more like a fastball, it is a good change-of-pace pitch that has breaking action but does not put as much stress on a pitcher’s arm, elbow, or shoulder as a change-of-pace pitch would.

In this step-by-step tutorial, we’ll go through both versions of the pitch.

Gripping a Cutter Like a Two-Seam Fastball

To begin, you should hold the cutter in the same way that you would a two-seam fastball. This requires you to place your index finger and middle finger on the two narrow seams on the ball. They should be placed on the top of the ball, with the “U-shape” of the seams facing out from your hand as you roll the ball.

Step2: Adjust These Fingers

After that, you’ll make a small change to the position of these two fingers on the keyboard. You want to keep the fingers as close together as possible. You have two options when it comes to where you want to place your fingertips. They may be positioned so that the seam runs straight between your fingers, or they can be positioned so that your middle finger runs down the seam.

In the end, it doesn’t really matter where you choose to place your fingertips. Whenever you’re creating a pitch, you should experiment with both alternatives until you find one that seems the most natural to you and produces the greatest results for your specific pitch.

Step3: Slide Your Thumb Out

When throwing a cutter, the position of your thumb will differ from the position of your thumb when throwing a two-seam fastball. Ideally, you would want to slide your thumb out such that it would make a circle with your middle and index fingers if both of those fingers were stretched in exactly the same way. In the case of a two-seam fastball, your thumb would be about at the 6:00 position, which is in the middle and bottom of the ball. When using this style of cutter, you want your thumb to be in either the 4:00 or 5:00 position on the blade.

Step4: Turn Your Wrist

It is preferable to have your wrist rotated ever so slightly toward your thumb while cutting with a cutter. This is another another minor variation on the standard two-seam fastball. For right-handed pitchers, this means turning your wrist slightly to the left to make the pitch. If you’re a left-handed pitcher, on the other hand, you’ll want to gently turn your wrist to the right as you throw.

Step5: Let the Middle Finger Lead

It is preferable to have your wrist moved ever so slightly toward your thumb when cutting with one of these knives. This is another another little modification on the traditional two-seam fastball. For right-handed pitchers, this means turning your wrist slightly to the left to accommodate the change. A modest rotation of your wrist to the right is recommended if you are a left-handed pitcher, on the other hand.

Gripping a Cutter Like a Four-Seam Fastball

Once again, the first step in holding a cutter like a four-seam fastball is to ensure that your middle finger and index finger are correctly aligned with one another. Each of these fingers should be perpendicular to the seam of the baseball while grasping a four-seam fastball, which is a U-shaped seam. A four-seam fastball is so named because each finger makes two separate contacts with the ball, for a total of four contacts. With both fingers, press the seam at the bottom and at the top of the seam.

Step2: Shift the Fingers

As a next step, you will want to shift these two fingers in a manner similar to how you would shift your fingers when throwing the two-seam fastball form of the cutter. The four-seam fastball variant requires you to also move the two fingers close together and slide them to the right in addition to the other movements. Apply further pressure to the middle finger once again. It will be the last finger that comes into contact with the ball as you release it, and the added pressure will aid in the creation of the cut you are going for.

Step3: Your Thumb

Finally, you’ll put your thumb near the bottom of the ball to help you maintain your hold on the ball longer. When throwing a four-seam fastball variant of the cutter, it is not necessary to be as far out on the ball as it is when throwing a two-seam fastball form of the cutter. Simply ensure that it is slightly off-center and that it is comfortable for you to grasp and throw before proceeding.

How to Throw a Cutter – No Matter What Grip You Use

In the same way you throw a two-seam fastball or a four-seam fastball, you’ll throw a cutter in the same manner as well. As with every other pitch, the key to keeping batters guessing about which pitch is to keep your grip hidden as much as possible. When you have a cutter grip, it’s rather easy to see since your two index and middle fingers will be so close together and your thumb will be over to the side. The location of fingers on the ball is unique to this pitch, and there are no other pitches that will have it.

This means that practicing with your cutter before trying to throw it in a game is really essential. Knowing what pitch you’re about to throw allows a hitter to predict where the ball will land, which makes it that much simpler to hit.

Step2: Keep Your Fastball in Mind

As throwing a cutter, you want to make sure that you’re thinking fastball, fastball, fastball when you pitch it. Your motion should be plain and easy to understand. When you move your wrist, you don’t want any rotational movement or snapping. It should be an up-and-down motion the entire time. Throwing a cutter with the same arm speed as your two-seam or four-seam fastball (depending on which variation you choose to throw) is also a good idea. Finally, just like you would with your fastball, you want to make sure that your arm extends completely out in front of you.

See also:  What Channel Is The Baseball Game On Tonight

Step3: Snap Down

Immediately before releasing the baseball, you should snap your wrist down as forcefully as you would with a fastball to set the pitching motion. The only significant difference between this and the release of a cutter is that you’ll be exerting that extra pressure with your middle finger instead of your index finger. This is what will cause the baseball to have a tiny spin on it, causing it to have late-breaking movement from one side to the other. If a cutter is moving away from a same-handed batter (for example, a right-handed pitcher and a right-handed batter), he or she should move in toward an opposite-handed batter (right-handed pitcher and left-handed batter, for example).

This will guarantee that you have the appropriate amount of power on the field.


If you learn how to throw a cutter well, you’ll be learning a lethal pitch in the process. It has the same side-to-side movement as a curveball, but it doesn’t break as violently and does so later in the game rather than earlier in the game. Because it is delivered in a manner that is extremely similar to a fastball, it is difficult for a batter to detect the spin on the ball, making it a very tough pitch to hit. You may throw a cutter in the same manner as you would a two-seam fastball or a four-seam fastball.

Everything else is secondary; you simply want to ensure that your grip is comfortable and that you can throw the pitch with ease.

How to Throw a Cut Fastball

Documentation Download Documentation Download Documentation An example of a cutter is a two- or four-seam fastball that has been sliced into two or four pieces. A right-handed pitch, it goes from right to left in the same manner as a curveball, but with a more gradual and less violent break. You will not be required to throw the pitch like a curveball due to the mechanics of the pitch, which are still fastball-like in nature. Applied correctly, the cutter is a deadly pitch that is intended to draw off-balance contact from the batter.

  1. 1Begin by grasping the ball in the same manner as you would a two-seam fastball. In order to throw a two-seam fastball, the index and middle fingers must be held on both of the narrow seams of the baseball
  2. 2 Instead of keeping your fingers where they are, shift your two index and middle fingers to the right. Make sure your fingers are somewhat near to one another when you’re holding the pen. Your fingers can be positioned so that the seam goes straight through the center of your middle finger, or so that the seam runs directly through the middle of both fingers. Experiment with several approaches to see which one works best for you. Advertisement
  3. s3 Change the position of your thumb such that it is diametrically opposite to your top two digits. A simple definition of diametrically opposing is that if you stretched both your index and middle fingers in the same way, they would ultimately form a complete circle.
  • Consider the ball to be similar to a clock. For example, if your thumb is at 6 o’clock in a standard two-seam grip, your thumb should be either 4 o’clock or 5 o’clock with this grip.
  1. Consider the ball to be analogous to a stopwatch or clock. For example, if your thumb is at 6 o’clock on a standard two-seam grip, your thumb should be at 4 o’clock or 5 o’clock now.
  1. 1Begin by grasping the ball in the same manner as you would a four-seam fastball. In order to hold a four-seam fastball properly, the index and middle fingers must be held perpendicular to the U-shaped seams of the pitch. You should be able to make four contacts with the seams of the baseball, including the bottoms of both fingers and the top
  2. 2Move your two fingers together and slightly to the right, putting more pressure on your middle finger. This will aid in the creation of the cut in your fastball, since the middle finger will be the last finger to make contact with the ball
  3. 3 Keep your thumb at the bottom position, or even higher up on the inside of the ball, anchoring the ball in the bottom position. Your thumb and your top fingers may not be exactly diametrically opposed, but they should be rather comfortable in their relationship. Advertisement
  1. As you wind up the windup, conceal the sliced grip in your glove by folding it in half. After the baseball is released, you don’t want to give away your pitch until that exact time. To give away too much information about the pitch too soon might spoil its surprise value
  2. 2 Think “fastball” all the way through your game. After all, it is a fastball, and the cutter is a fastball. You want to use your hand to make a basic up-and-down action rather than imparting any spin with your wrist.
  • Make sure your arm-speed is comparable to your fastball arm-speed before you begin. Make sure to completely extend your arm as you deliver the pitch.
  1. 3)Continue to the end and snap your wrist down while applying little pressure with your middle finger to create a tiny rotation. This will force the ball to travel away from a right-handed hitter and closer to a left-handed batter when the batter strikes the ball. Advertisement

Create a new question

  • Question Is it OK for me to throw a cutter as a kid pitcher? (I am eleven years old.) Yes. Torquing your wrist or turning your thumb and fingers aggressively while throwing a cutter will not stress your tendons in the same way that other methods do. A fastball/cutter is a toss that is free of errors. If you continue to pitch as you become older, your arm will have a longer lifespan. Question Will throwing in this manner assist me to throw more quickly? In fact, it’s merely a pitch that bends either inside or outside depending on which arm you use to toss it. Throwing in this direction will provide you with a tactical advantage, but your speed will remain same
  • Question What is the proper way to toss a knuckle curve? The grip is the same as a standard curve ball, except that you place the knuckle of your middle finger against the ball. A fastball is used to convey the message, but you should experiment to find out which method works best for you. Question Is it true that pitching takes a long time to master? It might take a long time to develop, but some people are born with a natural aptitude for the subject. If you put in enough time into anything, the better the outcome will be. Question Is this comparable to a slider in any ways? A slider, on the other hand, is a distinct method of distribution. It is not the same arm swing
  • It is different. Question How can I throw a cut fastball more quickly? Make sure that your hand, other than your fingers, has as little contact with the ball as possible.

Inquire about something There are 200 characters remaining.

Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Inquire about a problem a total of 200 characters are still available Fill up the blanks with your email address to be notified when your query is answered. SubmitAdvertisement

Thank you for submitting a suggestion for consideration! Advertisement

About This Article

Summary of the ArticleXTo throw a cut fastball, begin by grasping the baseball with your index and middle fingers on the two narrow seams of the baseball. Afterwards, shift your two index and middle fingers over to the right, keeping them somewhat close together, so that your middle finger runs down the seam. Once this is done, tilt your wrist slightly in the direction of your thumb and snap it down with your middle finger to produce spin that will assist the ball in cutting as it is released from your hand.

Did you find this overview to be helpful?

Did this article help you?

Some pitchers toss a fastball with a natural cut to the plate. Specifically, we mean that their regular fastball, which is meant to be straight, is really cutting instead. When performed at a high level, this may assist a pitcher in becoming successful if it is harnessed; Mariano Rivera is an excellent example. However, for novice pitchers, “natural cut” just refers to the fact that they do not know how to correctly throw a fastball, and in this post, I will explain why natural cut is not a positive thing in the first instance.

First: “Natural” Is Misleading. Natural Cut = Accidental Cut.

In most cases, the phrase “natural” refers to anything that is nice and suitable, and that has been drawn from the soil in a healthy manner. This is not the case in this instance. Coaches and inexperienced pitchers are frequently misled by the term “natural,” which refers to a cutter in baseball. When a pitcher wants to throw a “normal” fastball with cutting action (movement to the gloveside), he has inadvertently imparted sidespin to the ball, which is what causes the cutting action to appear.

This is due to the fact that they are unintentionally slipping to the side of the ball as they apply their arm speed to it, resulting in cutting action.

Why Accidental Cutters are Bad for Young Pitchers

What professional pitchers do is frequently inapplicable to how amateur pitchers should be developed, and this is an example of this. If a professional pitcher discovers that his fastball is cutting “naturally,” he or she can take advantage of the situation. Cutter pitches, on the other hand, are not particularly successful for pitchers who throw below 85mph, and this is especially true when the ball is delivered inadvertently. When ANY pitcher mistakenly cuts the ball, however, it indicates that they have a mechanical, grip, or hand motion flaw that has to be addressed.

In this article we’ll cover:

  1. This is what a fastball is meant to do
  2. This article will explain why throwing a straight fastball is a fundamental core ability for a pitcher. What is the source of the cutting action
  3. Why clipping the ball is a fastball fault in the first place
  4. The best moment to use a cutter is when it’s convenient.

1. What a Fastball SHOULD Do.

Each of the three different sorts of fastballs has its own specific goal, and they are as follows: The four-seamer would be the “typical” fastball if we were to categorize them all. This is the classic “fly-straight, go-fast” pitch that everyone knows and loves. The other two have a distinct function and motion that differs from that of a regular four-seam skiff.

In other words, if we’re stating that a pitcher’s typical fastball is a natural cutter, that pitcher lacks the ability to throw a straight pitch, which is a fundamental, foundational pitch – something that can go where we want it to go at the exact moment we need it.

2. Why A Straight Fastball is The Biggest Foundational Pitching Skill

Go to a youth baseball game and cheer on the players. What is the most difficult challenge for rookie pitchers? Yes, that is correct – tossing the ball over the plate. It is therefore unfair for coaches to request that pitchers who struggle to throw strikes in general try fastballs with movement (two-seamers and cutters), because we are setting them up for failure. How are they going to throw a pitch that moves over the plate if they can’t throw a straight pitch over the plate? For a rookie pitcher, the most important first aim is to throw strikes as often as possible.

The higher the straightness of their fastball, the more likely it is that it will locate the strike zone.

Pitching coaches have two main goals:

  • Gain victories
  • Provide techniques to pitchers that will aid in their long-term growth

Nonetheless, these objectives frequently conflict:

  • Some abilities will be beneficial in the long run, but may not be as beneficial right now
  • For example, throwing a changeup is less difficult for inexperienced batters to hit than throwing a curveball. Nonetheless, it is critical to acquire and understand this pitch as early as possible because it takes a long time to perfect.
  • Other abilities may boost a player’s capacity to win games today while hindering or delaying his or her long-term growth.
  • To provide an example, throwing fastballs with movement while still young may make it more difficult for batters to hit them, but also makes it more difficult for a rookie pitcher to deliver strikes and establish himself as a trustworthy pitcher for his club.

In this scenario, the dispute is between a straight fastball and a moving fastball.

  • A straight fastball will assist young pitchers in throwing more strikes (which is beneficial for long-term command), but it will be more difficult to hit (which is detrimental in the near run). Despite the fact that a cut fastball is tougher to hit nowadays, it will hinder a pitcher’s ability to command the zone while also decreasing the velocity of the pitch

3. Why a Cutter Cuts

Two-seamers are forced to throw to the arm side in part because of the armslot of a pitcher. Two-seam movement can occur even if the pitcher does not apply any particular spin to the ball during the delivery. Cutters, on the other hand, are not like this. In order for the ball to cut (go to the gloveside), sidespin must be imparted to it or the ball must be slanted slightly after release. Essentially, the pitch must be positioned slightly to the side of the ball during release, imparting spin that pushes the ball to cut back into the strike zone.

As previously indicated, velocity is lost as the pitcher transforms part of it into spin by positioning himself to the side of the ball.

4. Getting to the Side of the Ball = A Fastball Error

It is necessary for a pitcher who is purposely throwing a cutter to experiment with various aspects of his grip, release and hand posture so that he applies less force to the center and more force to one side of the ball. If a pitcher attempts to impart force in the center of his fastball (4-seamer), but fails to do so and causes the ball to cut, he is essentially screwing up the fastball. On it, he loses a little bit of his speed and precision. As a result, many “natural” cutters are actually merely accidental cutters, and this release mistake may be addressed by adjusting the grip, hand posture, or general mechanics of the cutter.

5. Why Slow Cutters Are Ineffective Pitches

Finally, professional pitchers who throw 87 mph or above have cutters that are completely different from cutters thrown by rookie pitchers with lesser velocity. The cutter was made famous by Mariano Rivera, and it is so little that it can hardly be seen being used on television. True, pro-caliber cutters are hurled with such force that they scarcely shatter at all — breaking only a few inches from the handle to the blade. However, because they are extremely hard and do not break much, the break that they do experience looks to be quite quick and severe.

Because the break occurs so late and in such an unexpected manner, the batter is unable to adapt no matter how hard he attempts.

Youth Cutters are Junk.

Youth cutters, in particular, just meander through the strike zone, offering neither sharp-breaking nor startling movement. If they are thrown to the gloveside, they will rather merely gently swerve across the zone. Whenever they are thrown to the pitcher’s arm side, they simply “cement-mix” and spin, thereby turning them into a slower, but still straight fastball. This is, once again, a piece of garbage. I’m not sure how I know this. As a result of my extensive experience, I’ve caught practically every pupil in thousands of pitching classes over the past several years.

In reality, a youth cutter is either a slider that doesn’t break or a fastball that bears slightly to the gloveside of the plate when pitched to a young batter.

The use of a good two-seamer can result in a large number of ground balls, but the use of a good cutter can result in either poor contact or ground balls.

Are Cutters Effective For Amateur Pitchers?

When I was playing professional baseball, I threw one, and it was a really effective pitch. It was, however, extremely difficult to master and was only utilized in a very limited number of situations due to its difficulty. The cutter should be learned at the highest level of college or professional baseball, and only after a pitcher has mastered the ability to command the strike zone in general, throw a straight fastball (with no accidental cutters), and command two other secondary pitches, should the pitcher consider learning the cutter (a breaking ball and changeup).

See also:  How To Draw A Baseball Player


How to Throw a Slider – The Definitive Guide for Pitchers

It is one of the most challenging challenges in baseball to master the art of throwing a slider well. This is due to the fact that it is not as basic a pitch as the curveball, and it requires a great deal more patience and the guidance of an experienced pitching coach. Slider grips, the spin, technique, and troubleshooting are all covered in this tutorial on how to throw a slider well. Please keep in mind that this post may include affiliate links, which means that if you click on them and make a purchase, I may receive a small profit at no additional cost to you.

How to Throw a Slider – What’s In This Comprehensive Article

The following is a summary of this comprehensive tutorial on throwing a slider. What we’ll discuss today is critical for pitchers of all ages, and it includes:

  1. Hand grips for the slider
  2. The spin – how and why a slider breaks
  3. Misconceptions that are common
  4. When should a slider be used
  5. What sort of pitcher should use it
  6. How difficult it is to toss it
  7. Locations of the sliders
  8. How to go about learning it–the steps to take and videos of pitching drills

How Do You Grip a Slider?

Grip on the slider; the spin – how and why a slider breaks; Misconceptions that are widely held. When should a slider be used; what sort of pitcher should use it. I’m not sure how difficult it is to toss; Locations of sliders How to go about learning it–the steps to take and videos of throwing drills

  • The pitch will NOT be created by the grip
  • Finding a solid grip just assists you in spinning the ball more effectively
  • You may or may not be able to replicate a Major Leaguer’s grip. Before considering a grip a success or a failure, experiment with other grips and give them a fair go.

This is true of all slider grips in some form or another.

Different Slider Grips to Try

The easiest method to learn about grips is to watch my video below (which is number 1 if you search on YouTube for the slider). Check it out and be sure to subscribe to my YouTube channel! However, the most basic grasp looks somewhat like the figure below, with the index and middle fingers close to each other, overloaded on the arm side of the ball, and slithering up the horseshoe (see photo below)

The Type of Spin You Want on a Slider

A slider is a combination of two spins: bullet spin and forward spin, which, when combined, cause the ball to break at a 45-degree angle to the horizontal. Bullet spin is defined as rotation that is perpendicular to the direction in which the ball is moving. Forward spin (topspin) is a type of spin in which the ball spins in the same direction as it is going. Sliders are distinguished from other pitches by the presence of a red dot on their forward aspect. While batters may recognize sliders by the presence of this dot, it is just a characteristic of the pitch and not something pitchers should avoid.

Every pitcher’s slider breaks in a different fashion, but the average is a diagonal break with roughly equal downward and lateral break.

To produce this type of break, basically the following happens:

  • Attempts are made by the pitcher to get his fingertips closer to the front of the ball in order to induce forward spin. Having the attitude of being on top of it is a good one
  • Then, when he releases it, he’ll move slightly to the side of it, and the natural pronation of his hand will provide the “bullet spin.”

Frequently, pitchers make the mistake of getting their hand around the ball, which is NOT the right way to do it. They are hoping to imitate a sideways sweeping motion they see on television by wrapping their hand around the ball. Acquiring a position on the side of the ball provides a pitch with a lot of sidespin, which results in a sloppy, poor break of the ball.

Common Misconceptions About Throwing the Slider

To get started, let’s go through some common misunderstandings regarding throwing the slider:

  1. They’re more taxing on the arm than other exercises. Moreover, they are inappropriate for young pitchers. They’re more harder to toss than regular balls
  2. The curveball is a more effective pitch. You toss a slider by positioning yourself on the side of the slider

Let’s get this done!

Misconception12: They’re more stressful and not appropriate for youngsters

First and foremost, I agree that sliders are not the finest pitching tool for young pitchers, but solely on the grounds that ALL breaking balls should be taught later in life–at the age of 14 or 15. As a result of this, I do not believe – and research supports this – that any certain style of breaking ball is worse than another. A slider, on the other hand, is a pitch that can be learned by a child who is ready to master the art of throwing a curveball. There is no data to support the claim that sliders are worse than curveballs.

Rapidly changing speeds provide greater stress than sliders.

In no way can this be interpreted as implying that breaking balls of any sort are beneficial to young pitchers (defined as pitchers aged 14 and under).

What is the explanation behind this? Because pitchers over-rely on breaking balls and fail to learn to command their fastball or develop a decent changeup, both of which are extremely vital in the long run, the game has become increasingly difficult.

Are Sliders Okay For Amateur Pitchers?

Yes, as long as it is reasonable. Pitchers should always learn to command their fastball and changeup before moving on to the next pitch. Later on, you may incorporate a breaking ball. Similarly, if a pitcher is permitted to throw a curveball, he is also permitted to throw a slider. The difference between the two is really simply about arm motion and which throw a pitcher is best suited for. More on who should use a slider and who shouldn’t follow in a moment.

Misconception3: They’re More Difficult to Throw

Sliders are no more difficult to master than curveballs; both pitches require a great deal of attention, time, and solid instruction in order to throw effectively. A terrible curveball may be thrown by any youngster (and most curveballs are bad curveballs). Additionally, any child may throw an ineffective slider. Are you planning a good party? The slider is undoubtedly the easiest of the two pitches to throw, which is why so many more pitchers use them at the collegiate and professional levels.

Additionally, because their break is shorter, they are simpler to throw for strikes.

Misconception4: The Curveball Is a Better Pitch

Eh. I’m not sure either pitch is preferable than the other. When thrown correctly, the curveball may be extremely tough to hit, while sliders are thrown harder and seem to be fastballs for a longer period of time. Realistically, it’s probably a tie between the two, and the comparison is a bit of an apples to oranges affair. More information may be seen in the video below, which compares the slider with the curveball. At the end of the day, the greatest breaking ball is one that you can toss accurately.

Others will use the slider to adjust their settings.

The only thing that matters is that a pitcher is capable of throwing one of them well.

Misconception5: You Get on the Side of a Slider to Make it Break That Way

Earlier, I said that we did not want to impart sidespin, which would cause the disc to rotate in circles like a frisbee. Because the pitch is a combination of a bullet and forward spin, it is best to mentally prepare for the pitch by attempting to get *mostly on top of it as much as possible. Despite the fact that the fingers will not be directly on top of the ball, the idea is to keep the hand from slipping too far to the side, which would result in completely incorrect spin–frisbee spin is not good.

What Type of Pitcher Should Throw a Slider?

For this, I have a few ground rules:

  1. If you have a lower armslot, a slider will be more effective for you than a curveball.
  • When throwing curveballs, you need topspin, and because of the low armslot, obtaining topspin is quite tough.

If you’ve tried throwing a curveball and it hasn’t been very nasty after a few years, you should try throwing a slider.

  • If, after two years, your curveball isn’t excellent enough to generate consistent swings and misses, or if you can’t throw it for strikes at all, you should either find a new pitching instructor and work really hard to improve your curveball, or you should go on and learn a slider. Two years is sufficient time to either “get it” or come to the realization that you are not going to get it.

Keep using the slider if you’re having trouble getting the curveball to spin, but you’re having success with the slider.

  • In order to determine whether or not a rookie pitcher has a natural aptitude to spin one or the other, I normally experiment with both when teaching them their first breaking ball. This shows to be the case on a regular basis

Lower arm slot pitchers have a tendency to get more sink and run on their fastballs, which makes the slider–which breaks in the opposite direction of a sinker and changeup–a fantastic pitch to have in one’s arsenal of pitches.

What Locations Work Best for Sliders, Based on the Count?

In the video below, I illustrate where the optimum slider positions are to be found. It’s important to remember that having a sharp-breaking slider isn’t enough. Pitchers of all ages must be able to find their targets correctly and execute their pitches according to the count. Using a superb slider but throwing it in the wrong spots will not provide a positive outcome or get hitters out.

How Hard Should You Throw Your Slider?

In a nutshell, the answer is simple: work as hard as you possibly can! It will be thrown as hard as the Incredible Hulk can toss it. Try to throw as hard as you possibly can, even harder than your fastball. Specifically, what I’m referring to is intensity, which means that you throw it with the mentality that you’re throwing it at least as hard as your fastball. Because of this, your slider will normally be 8-10 percent slower than your fastball when it is thrown correctly. In my book, I discuss the speed change ratios on all common pitches, including this one, and I include this example.

  • 100mph fastball equals 90-92mph slider
  • 90mph fastball equals 81-83mph slider
  • 80mph fastball equals 72-74mph slider
  • 70mph fastball equals 62-64mph slider
  • And so on and so forth.

If the slider moves more slowly than this, it isn’t actually a slider. If it is more difficult than this, it is not a true slider. The bottom line is that when you properly spin the pitch, it will finish up in this velocity range because spinning the pitch causes velocity to be lost into the baseball. Spin is essentially a velocity absorber. The more effort it takes to spin the ball (like with a curveball, which needs the fingers to reach higher up the ball in order to impart topspin), the slower the pitch is expected to become.

Curveballs are normally 13-20 percent slower than fastballs, yet hitting the curveball as hard as possible is also a criterion when throwing a curve.

How to Throw a Slider – the Learning Process

The general outline is as follows:

  • Find a grip that you believe would be suitable for you
  • Choose one or two pitching drills that allow you to concentrate more on your hand position than on the rest of your delivery. Start 35-45 feet away from a partner and work your way closer. Slow sliders should be thrown utilizing the pitching drill, with the emphasis solely on spinning the ball properly and how it feels off your fingers. Returning slowly, re-introducing your entire mechanics, and gradually increasing the speed

The1 Throwing Drill You Should Use.

This practice, which I refer to as the square-hips drill, is the most effective for helping you isolate your hand position and feel the slider as you begin to learn how to use the slider properly. Start with this one as a starting point in your learning path.

Key Points to Remember When Learning a Slider

  • The slower you throw it, the more comfortable you’ll be with it. It’s tougher to discern if you’re doing anything correctly when you’re moving quickly. Slowly increase your pace and return to the starting point. Your ability to get a feel for the pitch will be diminished the more you rush it. Drills serve to remove a portion of your body from the equation, making it simpler to isolate and feel where your hand is in relation to your body. It will be more difficult to throw a decent slider (or any pitch, for that matter) if your mechanics are poor. You have to toss it THOUSANDS of times before it starts to become useful. Maintain your patience and recognize that it will take time. Please allow me to reiterate:

You have to toss your new slider THOUSANDS of times before it starts to work properly. Maintain your patience and recognize that it will take time.

Leave a Comment and Check Out My Pitching Resources

Thank you for taking the time to read this! Here are some ways you may continue to learn from me:

  • I have a lot of materials in my books
  • My online classes are great, and they are just as beneficial as working with me in person. My email newsletter, which contains a weekly roundup of my latest articles, is well-liked.

Share this post with a friend and let us know what you think!

Slide GripsTips FAQ

Grasp the baseball’s horseshoe with your index and middle fingers and press them against one of the seams on the inside of the horseshoe.

Overloading the ball slightly toward the outside will help it bounce better. You’ll throw the ball with the same force as your fastball, and the appropriate slider grip will assist you in applying a combination of bullet spin and forward spin to cause the ball to break.

How does a slider move?

Typically, a slider breaks diagonally, around 6-10 inches in length, however it may appear to break more quickly the slower it is thrown. In every case, the break is taken on the pitcher’s gloveside, which is away from the righty for a righthanded pitcher. Break and movement are created by a combination of bullet spin and forward, angled spin in the slider’s distinctive break and movement.

How do you throw a really good slider?

The first step is straightforward: put in a lot of practice time throwing the ball around while playing catch. You need someone who can tell you when you throw a good ball and when you throw a bad one in order to improve your spinning technique. A quality catch partner and catcher is essential for providing you with feedback on how well you are spinning the ball. When it comes to throwing sliders, the finest pitchers have extremely quick arms and throw their sliders really hard–the harder the slider is thrown, the more abrupt the break will look to a batter.

Good sliders have a high RPM spin but a poor spin efficiency, according to Rapsodo’s statistics on the subject.

What age should you throw a slider?

It is true that the slider is more demanding on the arm than other pitches, but this is not always the case. Although the American Sports Medicine Institute has demonstrated via research that the fastball is the most stressful pitch in baseball, there are a variety of reasons why youth pitchers should refrain from throwing breaking balls too early in their careers. Young pitchers who throw breaking balls, such as sliders, report higher arm soreness than their counterparts who do not throw breaking balls.

However, each pitcher is unique, so proceed with caution and make your own decision when the time is right.

What’s the difference between a cutter and a slider?

It is possible to throw a slider with a combination of bullet spin and angled forward spin. A slider is also generally 10 percent slower than a fastball in terms of velocity. Cutters, on the other hand, are thrown considerably more forcefully and with a different spin. In comparison to the fastball, a cutter has a slanted backspin that is slightly inclined to the pitcher’s gloveside. A cutter is 4-6 percent slower than the fastball. Sliders shatter 6-10 inches, whereas cutters only break a few inches with each cut.

Why is it called a slider?

Curveballs were the first breaking balls, while sliders were introduced considerably later in baseball history. It is because of their shorter break and higher velocity that they have been given this appellation. It appears that they “slip away” from a hitter rather than taking the large, bending course as curveballs do.

Leave a Reply

Your email address will not be published.