What Does Gidp Mean In Baseball

Pujols’ one unbreakable record

Reggie Jackson, a Hall of Famer, has more strikeouts than any other player in baseball history. The legendary Rickey Henderson was busted for stealing more than any other player in the league. Pete Rose is the all-time hit leader by a wide margin, and he is followed by Hall of Famers Hank Aaron, Carl Yastrzemski, Cal Ripken, and Eddie Murray, who are all in the top five. Essentially, baseball is a game in which players fail repeatedly, as the expression goes in baseball. The most talented players are also the ones that are most likely to be unsuccessful.

I had a total of 7,000 outs.

I had a total of 7,000 outs.

And it is the secret to everything.” Because that is the whole point, we should take a break from our marathon viewing of things we will never see again and, yes, appreciate them, as strange as it may sound.

  • The two unbreakable records held by Nolan Ryan In the event that Pujols remains healthy, he will raise the double-play record to a level that no one else will ever be able to surpass.
  • If Pujols keeps up his current pace, he will certainly surpass everyone else in terms of total double plays with 100 or more.
  • After ten seasons, the lowest he had ever hit was.312, and that was within his first ten seasons.
  • Pujols had driven in 100 runs every year except one, and he had scored 100 runs in all but one of those years (in 2007, he only scored 99).
  • He hit 120 more home runs than the ultimate home run champion, Barry Bonds, throughout his career.
  • He finished with 24 more RBIs than the ultimate RBI champion, Hank Aaron.
  • Aaron came the closest in terms of consistency.

When it comes to hitting, many have likened Pujols to Frank Thomas when he was younger.

52.7 WARIt is easy to forget exactly how spectacular Pujols was in his prime years, especially in light of his subsequent struggles.

It may seem unbelievable, but Pujols has been with the team for six seasons and his career numbers have been significantly slowed.

Louis, he was hitting.328 at the time of his departure.

Pujols’ lifetime slugging percentage has dropped by 50 points since the start of the season.

And as young fans get increasingly engaged in baseball, they only see this side of Pujols, just the confident man who continues to battle through ailments, perseveres through adversity and occasionally hits a home run on the road to greatness.

The double-play record is a relic from Pujols’ peak, and it has been preserved for posterity.

Hey, the all-time list of double-play leaders is a list of all-time great baseball players, so have a look: 1.

Ripken, 350 points 3.

4.

Yastrzemski with 323 points They are all first-ballot inductees into the Hall of Fame.

All of the athletes swung their arms and smacked the ball hard for an extended period of time.

If you bat in the middle of the order like these players, you’ll come up to the plate with a lot of men on first base, which is a good thing in baseball.

Thome, on the other hand, struck out more than twice as frequently as Pujols.

Do you want to hear a strange statistic?

Pujols holds the distinction of being the only active player with more than 1,000 plate appearances who has walked more than the number of strikeouts he has struck out, something you may already be aware of.

However, what if you limited it to 500 plate appearances instead?

Suppose there are 250 plate appearances?

You have to drop the minimum number of plate appearances to 100 in order to discover another active player who has walked more than he has struck out in the same amount of time.

He took a total of 12 steps.

Even after 90 plate appearances, 80, 70, 60, 50, 30, 20, and 20 – and it’s still just Pujols and Granite – you can get a little bit further.

He took a single step.

This only goes to show you that Pujols is a man who has lived in the wrong era.

One more than Willie Mays and one less than Aaron, Pujols has had seven seasons with 40 or more home runs and fewer than 100 strikeouts, the most of any player in the previous 50 years.

Four times, including last season, Pujols has been the league’s leader in double plays.

It contributes to its definition.

Jose Cabrera, another outstanding hitter, is second on the active list with 294 hits, 68 behind Pujols, and he may have a shot if Pujols is unable to maintain his form and Cabrera is able to remain healthy.

However, if Pujols raises the number above 400, into the 425-450 region, it will most likely remain there for decades, a strange but fitting homage to a brilliant player who year after year after year hit the ball hard on the field. and, on sometimes, directly towards a fielder.

What Is A Ground Into Double Play (GIDP) In Baseball? Definition & Meaning

Ground in*to a double-team situation

What Is The Definition Of Ground Into Double Play (GIDP) In Baseball?

double-teaming the ball in*to the ground

What Does GIDP Mean In Baseball Stats?

In baseball, GIDP is an abbreviation that stands for “ground into double play.” This signifies that the batter hit a ground ball that was collected by a defensive player who then threw the ball to one base in order to get one opponent out, followed by another defensive player throwing the ball to another base in order to get a second opponent out, as described above. Ground ball infield double play (GIDP) is a statistic that shows how many times a pitcher caused a hitter to hit a ground ball that ended in a double play.

Who Has The Most GIDPs in Baseball?

Albert Pujols, who is better renowned for his power than his speed, has grounded into a double play 413 times in his career. Compared to the second-place player, Cal Ripken Jr., he has played 63 more times (350). Miguel Cabrera, another hitter with more power than speed, has 342 GIDPs in his Major League Baseball career.

Example of Ground Into Double Play (GIDP) Used In Commentary

The fact that Albert Pujols has grounded into the most double plays in MLB history is no surprise given his power as a hitter and his lack of agility to first base.

Sports The Term Is Used

1.Baseball

Also See:

1.3-6-1 Double Play2.1-2-3 Double Play3.6-4-3 Double Play1.3-6-1 Double Play2.1-2-3 Double Play 5.4-6-3 Double Play5.3-6-3 Double Play5.4-6-3 Double Play (This page has been seen 13 times, with 1 visit today)

GIDP Meaning in Baseball – What does GIDP mean in Baseball? GIDP Definition

The definition of GIDP is “Ground Into Double Play,” and more definitions may be found at the bottom of this page that are related to baseball terminology. GIDP has three possible meanings. All of the connotations associated with the GIDP acronym are found solely within the context of baseball terminology, and no additional meanings are discovered. If you would like to see further meanings, please visit the GIDP meaning page. As a result, you will be sent to a website that contains all of the definitions of GIDP.

GIDP Meaning in Baseball

  1. Grounded Into Double Play
  2. Grounded Into Double Plays
  3. Grounded Into Double Play

There are also additional sites where you may learn more about GIDP meaning for Baseball.

  • More about the definition of GIDP at Acronym24.com
  • Click here to learn about the GIDP on Wikipedia. Last but not least, search for “GIDP Baseball” in Google over and over again.

What does GIDP stand for Baseball?

We created a list of searches for the GIDP acronym in baseball-related search engine results. In order to make the site more user-friendly, the most commonly asked GIDP acronym questions for Baseball were picked and posted there. GIDP queries for Baseball are listed below, and we believe you asked a similar GIDP inquiry (for Baseball) to the search engine to find out what the meaning of the GIDP full form in Baseball meant. We are certain that the following list of Baseball GIDP queries will be of interest to you.

What does GIDP meaning stand for Baseball?

  • Its full name is Ground Into Double Plays (GIDP for short).

What is the meaning of GIDP abbreviation in Baseball?

  • In baseball, the meaning of the abbreviation GIDP is ‘Grounded Into Double Play’
  • In other words, it means ‘Grounded Into Double Play’.

What is GIDP definition?

  • In baseball, the meaning of the abbreviation GIDP is ‘Grounded Into Double Play’
  • In other words, it means ‘Grounded Into Double Play.’
What is GIDP acronym?
  • “Ground Into Double Plays” (GIDP) is an abbreviation for the phrase.
What is the definition of GIDP acronym in Baseball?
  • “Grounded Into Double Play” is the abbreviation for “Grounded Into Double Play.”
What is the full form of GIDP abbreviation?
  • Shorthand for “Grounded Into Double Play” is “Grounded Into Double Play,” which is defined as “Grounded into Double Play.”
What is the full meaning of GIDP in Baseball?
  • In its fullest form, GIDP stands for “Grounded Into Double Play.”
What is the explanation for GIDP in Baseball?

  1. GIDPS stands for “Ground Into Double Plays” and is defined as follows:

What is the meaning of GIDP Abbreviation in Astrology?

“Ground Into Double Plays” is the definition of GIDP.

GIDP Abbreviation in Astrology
  • GIDP (letter G)You are a perfectionist who strives for perfection in both yourself and your beloved. You are attracted to a partner who is intellectually equal to or superior to you, and who has the potential to elevate your social standing. You are sensual and know how to attain the pinnacle of excitement since you put in the time and effort to do it. You have the ability to remain incredibly active yet never being exhausted. Everything else is subordinate to your obligations and responsibilities. You may find it difficult to form emotional attachments with others
  • GIDP (letter I)You have a strong need to be liked, respected, and even adored by others. You take delight in elegance, sensuality, and sensual pleasures of the flesh. You are on the lookout for lovers that are experienced in their field. When it comes to amateurs, you are not interested unless the amateur is looking for a tutor. You are picky and demanding when it comes to getting your wants fulfilled. You don’t mind experimenting with and trying out new styles of sexual expression. Due to your tendency to become bored, you desire sexual adventure and variety. You are more sensuous than sexual, although you can be downright lusty at times
  • GIDP (letter D)Once you have made up your mind that you desire someone, you go all out in pursuit of that person. You are not one to give up on a mission quickly. You are a kind and compassionate individual. If someone has a problem, this turns you on because you want to help them. It is possible that you are possessive and jealous of others because you are intensely sexual, passionate, loyal, and intense in your engagement. To you, sex is a pleasure that should be savored. It is the quirky and odd that stimulates your interest, and you have a free and open mind
  • GIDP (letter P)You are highly sensitive of social propriety. You wouldn’t consider doing something that may jeopardize your image or reputation under any circumstances. Appearances are important, thus you should choose a companion who is attractive. You will also require a companion who is clever. Surprisingly, you may regard your spouse as a potential adversary. A good fight can get those sexy vibes going in a hurry. If you have any sexual reluctance, you are in the minority. You are open to new ideas and prepared to experiment with different approaches. You are a very gregarious and sensual person
  • You take pleasure in flirting and require a great lot of physical satisfaction.
See also:  What Years Did Babe Ruth Play Baseball

Grounded into double play – BR Bullpen

In the event that Abatter hits a ball that is not a base hit and results in two (or three) outs, he is said to have grounded into a double play. The outs are obtained by the use of a double play or a triple play (triple plays, particularly on ground balls, being exceedingly rare, they are not counted separately in this case). The hitter is not considered to have committed a GIDP if the ball is grounded into a double play. All other double plays, such as a fly out followed by a runner advancing on the basepaths, or a strikeout followed by an error (often known as “strike them out, throw ’em out”) are not counted in this category.

It is utilized in the calculation of more sophisticated statistics, such as the number of runs generated.

The most prolific GiDP

All Time Leaders
Span Player Total Notes
Career Albert Pujols 413* active player
Season Jim Rice 36 1984
Game Goose Goslin 4 April 28,1934
Game Joe Torre 4 July 21,1975
Game Yulieski Gurriel 4 September 25,2016

* As of the end of the 2021 season, the total is as follows:

G.I.D.P: What does GIDP mean in Sports?

GIDP is most commonly used as an abbreviation in the sport of baseball, and it stands for “Grounded Into Double Play” (Baseball Pitching)

What Questions Are Stands For GIDP?

  • What does it stand for when you say “GIDP”
  • What does it stand for when you say “GIDP”
  • What is the abbreviation for “GIDP”
  • What does the acronym GIDP represent
  • What does the term GIDP mean
  • What exactly is GIDP? What does it stand for in the MISCELLANEOUS category
  • What does the abbreviation imply in the category MISCELLANEOUS
  • What does it stand for in the category SPORTS
  • And what does it indicate in the category OTHER What does the abbreviation SPORTS signify in the category? What does it stand for in the MISCELLANEOUS category
  • And what does it indicate in the category OTHER What does the abbreviation imply in the category SPORTS
  • What does it stand for in the category MISCELLANEOUS
  • What does it signify in the category OTHER What does the abbreviation “MISCELLANEOUS” signify in the category?

Acronyms and abbreviations linked to GIDP may be found in the Acronyms and Abbreviations section.

Citation

Tony Gwynn had another outstanding season in 1997, with 592 at-bats and 220 strikeouts, and an avg of.372, which was the best in the National League. Which of these abbreviations do all of these letters stand for? The Baseball Almanac is glad to give a standard collection of acronyms that are seen and used in print on a regular basis in the sport of baseball.

Baseball Stats

Baseball Abbreviations 101
Offensive Abbreviations for Statistics
ABBBAVGCS2BGIDP GRSLHBPHHRRHRIBBISO LOB OBPOPSRRBISFSHSSLGSB%SBRSBSOTB3B At BatsBases on Balls (Walks)Batting AverageCaught StealingDoublesGround into Double Plays Grand SlamsHit by PitchHitsHome Run RatioHome RunsIntentionalBasesonBalls(Walks)Isolated Power Left on Base On-Base PercentageOn-Base Plus SluggingRunsRuns Batted InSacrifice FliesSacrifice Hits (Bunts)SinglesSlugging PercentageStolen Base PercentageStolen Base RunsStolen BasesStrikeoutsTotal BasesTriples
Pitching Abbreviations for Statistics
AOBB BFPBKCBOCGCGLERERAGFGOGOAOGPGSHHBPHRIBBIPIRAIPSLMB9OBAPARRPFRWS/SHOSOSVSVOTBWWP Fly Outs (Air)Walks (Bases on Balls) Batters Facing PitcherBalksCombined ShutoutComplete GamesComplete Game LossesEarned RunsEarned Run AverageGames FinishedGround OutsGround Outs / Fly Outs RatioGames PlayedGames StartedHitsHit BattersHome RunsIntentional WalksInnings PitchedInherited Runs AllowedInnings Per StartLossesBaserunners Per 9 InningsOpponents’ Batting AveragePlate AppearancesRunsRelief FailuresRelief WinsShutoutsStrikeoutsSavesSave OpportunitiesTotal BasesWinsWild Pitches
Defensive Abbreviations for Statistics
ACSDPEGPOFAPBPKPOSBTCTP AssistsCaught StealingDouble PlaysErrorsGames PlayedOutfield AssistsPassed BallsPickoffsPutoutsStolen Bases Total ChancesTriple Plays
Miscellaneous Abbreviations for Statistics
ML SER Major League Service
Baseball Stats Abbreviations 101

The “common” set has several variations (DO Doubles, TR Triples, etc.), but these are the ones that are regarded “official” and are the ones that are used here at Baseball Almanac, among other places. Did you know that the National Association (a non-official league that gave rise to the National Leagueofficial )’s statistics were destroyed in a fire in the early 1900’s? Major League Baseball organized a Special Baseball Records Committee in the 1960s to examine the irregular records that had been kept previous to the 1920 season.

You asked: What does GIPD mean in baseball?

Ground Into Double Play (GIDP) | MLB.com Glossary | Ground into Double Play (GIDP).

Who has the most GIDP?

Grounding Into Double Plays: Career Leaders in Grounding

Grounding into Double Plays All Time Leaders ‘Top 1,000’
Name GIDP Rank
Albert Pujols 413 1
Cal Ripken, Jr. 350 2
Miguel Cabrera 342 3

What is a good go AO ratio?

Ground outs are more likely to occur when the GO/AO ratio is greater than one. A GO/AO value less than one indicates that the hitter is more likely to fly out (air out).

What is baseball GDP?

The ball is grounded into a double play. Prior to 1933 in the National League, and prior to 1939 in the American League, and not documented at all in the other leagues.

What does TB mean in baseball?

Definition. The number of bases a batter has amassed as a result of his hits is referred to as his total bases. A single, a double, a triple, and a home run all result in one total base for the hitter, two total bases for a home run, three total bases for a triple, and four total bases for a home run.

Who hit into the most double plays 2021?

With 11,166 double plays, the Boston Red Sox hold the record for the most double plays by a club in baseball history.

What is a Cs in baseball?

A caught stealing situation happens when a runner attempts to steal but is tagged out before reaching second base, third base, or home plate. Definition: This often occurs after a pitch, when a catcher sends the ball to the fielder at the base before the runner reaches it, preventing the runner from scoring.

What does FB mean in baseball?

A caught stealing situation happens when a runner attempts to steal but is tagged out before reaching second base, third base, or home plate, as defined above. In most cases, following a pitch, when the ball is sent to a baserunner before he or she can reach it, the catcher is called for interference.

What is a lineout in baseball?

Lineout (baseball), a sort of play in which a player catches a line drive, is defined as follows:

What does FO mean in baseball?

PITCHING
2B Doubles allowed
FO Fly outs
GO Ground outs
H Hits allowed

What is a cheap win in baseball?

When a starting pitcher wins a game with a Game Score of less than 50, according to Bill James, it is considered a “Cheap Win.”

What does NP mean in baseball?

The total number of pitches thrown by a pitcher during live game action is calculated by the total number of pitches thrown by the pitcher, including strikes, accidental balls, and intentional balls.

In any baseball game, the number of pitches thrown by a pitcher is a highly significant statistic to keep track of.

What does K mean in baseball?

A strikeout happens when a pitcher delivers a hitter any combination of three swinging or looking strikes in one at-bat. When a batter strikes out, the letter K is used to indicate it in the scorebook. A reverse K is used to indicate a third-strike call in which the hitter does not swing at the ball.

What is the rarest pitch in baseball?

Strictly speaking, a screwball is a breaking ball that is meant to go in the opposite direction of almost every other breaking pitch. It is one of the most infrequently thrown pitches in baseball, owing mostly to the strain it may place on a pitcher’s arm.

What is a slug in baseball?

In baseball statistics, slugging percentage (SLG) is a measure of a hitter’s batting output, which is expressed as a percentage of his total hits. It is computed by dividing the total number of bases by the number of at bats. A slugging % is different from a batting average in that it gives greater weight to extra-base hits like as doubles, triples, and home runs in comparison to singles.

What does RISP mean in baseball?

One more single second of talking about batting average with runners in scoring position is too much for me to bear any longer (henceforth RISP).

ESPN.com – GEN – MLB Statistics Glossary

BATTING STATISTICS
P/PA Pitches seen per plate appearance
2B Doubles
3B Triples
AB At-bats
Avg Batting averageH divided by AB
BB Bases on balls
CS Caught stealing
FB Fly balls hit, excluding home runs
G Games played
G/F Ground ball/fly ball ratioGB divided by FB
GIDP Grounded into double play
H Hits
HBP Hit by pitch
HR Home runs
IBB Intentional bases on balls
LOB Runners left on base
OBP On-base percentage(H + BB + HBP) divided by (AB + BB + HBP + SF)
OPS On-base percentage plus slugging percentage. SeeOBP, above, andSlg, below, for definitions
OW% Offensive winning percentage. The theoretical winning percentage of a team comprising nine of the same players (e.g. nine Ken Griffey Jrs.).1) Figure runs created per 27 outs.2) Divide by league average runs per game.3) Square the result.4)Divide that figure by 1 + itself
Qualified year-to-date In order to qualify for batting titles in averaged categories (Avg, Slg, OBP, OPS, RC, OW%,P/PA, G/F), a player must average at least 3.1 plate appearances for every game his team has played. Sorting by qualified year-to-date excludes all players not currently on pace to reach that minimum
R Runs
RBI Runs batted in
RC Runs created+.52)] divided by (AB + BB + HBP + SH+ SF)
SB Stolen bases
SF Sacrifice flies
SH Sacrifice hits
Slg Slugging percentageTB divided by AB
SO Strikeouts
TB Total basesHits + 2B + (3B times 2) + (HR times 3)
TPA Total plate appearancesAB + BB + HBP + SF + SH + times reached on defensive interference
PITCHING STATISTICS
P/IP Pitches thrown per inning
P/GS Pitches thrown per start
Pit Pitches thrown
2B Doubles allowed
3B Triples allowed
Avg Batting average allowed
BB Bases on balls
Bk Balks
BlSv Blown saves. SeeSvOp, below, for definition of a save situation
CG Complete games
CS Runners caught stealing
Dec Decision (Win, loss)
ER Earned runs
ERA Earned-run average(ER times 9) divided by IP
FB Fly balls hit against
G/F Ground ball/fly ball ratio againstGB divided by FB
GB Ground balls hit against
GIDP Grounded into double plays against
GF Games finished
GS Games started
H Hits against
Hld Holds. Earned when a relief pitcher enters a game in a save situation (seeSvOp, below, for definition), records at least one out, and leaves the game without having given up the lead
HR Home runs allowed
IBB Intentional bases on balls
IP Innings pitched
IR Inherited runners. Runners on base when a relief pitcher enters a game
IS Inherited runners scored. Number of inherited runners (seeIR, above) to score while a particular pitcher is still in the game
L Losses
OBP On-base percentage allowed. SeeOBPin Batting Statistics, above, for definition of OBP
ORuns Opponents’ runs scored (average, per nine innings pitched) while the pitcher of record.
Qualified year-to-date In order to qualify for pitching titles in averaged categories (ERA, WPct,P/IP, RS, ORuns, Slg, OBP, Avg, CS%, G/F), a player must average at least one inning pitched for every game his team has played. Sorting by qualified year-to-date excludes all players not currently on pace to reach that minimum
QS Quality starts
R Runs
RBI Runs batted in allowed
Rel Relief decision (Save, blown save, hold)
RS Run support. Team’s runs scored (average, per 9 innings pitched) while the pitcher of record
SB Stolen bases allowed
SF Sacrifice flies allowed
SH Sacrifice hits allowed
ShO Shutouts
Slg Slugging percentage allowed. SeeSlgin Batting Statistics, above, for definition
SO Strikeouts
Sv Saves. Earned when a pitcher finishes a game without having given up the lead after entering in a save situation (seeSvOp, below, for definition)
SvOp Save opportunities. When a pitcher 1) enters the game with a lead of three or fewer runs and pitches at least one inning, 2) enters the game with the potential tying run on base, at bat, or on deck, or 3) pitches three or more innings with a lead and is credited with a save by the official scorer
TBF Total batters faced
W Wins
WPct Winning percentageWins divided by (Wins + losses)
WP Wild pitches
See also:  What Is A Perfect Game In Baseball
FIELDING STATISTICS
A Assists
CERA Catcher s earned-run average. Earned-run average of club s pitchers with a particular catcher behind the plate
CS Runners caught stealing
CS% Percentage of runners caught stealing
DP Double plays
E Errors
FPct Fielding percentage(PO + A) divided by (PO + A + E)
G Games played
GS Games started
Inn Innings
PB Passed balls
PCS Pitchers caught stealing. Total runners caught stealing when the player who initiates the fielding play is the pitcher
PO Putouts
POA Pickoff attempts
Qualified year-to-date In order to qualify for fielding titles in averaged categories (FPct., RF, CS%, CERA), a player must meet the following qualifiers: Catchers must play 1/2 of their team’s games; Pitchers must average at least one inning pitched for each of their team’s games; Position players must play 2/3 of their team’s games. Sorting by qualified year-to-date excludes all players not currently on pace to reach that minimum
RF Range factor(PO + A) divided by innings
SBA Stolen bases allowed
TC Total chances
ZR Zone rating. The percentage of balls fielded by a player in his typical defensive “zone,” as measured by STATS, Inc.

STATS Hosted Solution

Definitions of Baseball Terms
% Inherited Scored A Relief Pitching statistic indicating the percentage of runners on base at the time a relief pitcher enters a game that he allows to score.
1st Batter OBP The On-Base Percentage allowed by a relief pitcher to the first batter he faces in a game.
Active Career Batting Leaders Minimum of 1,000 At Bats required for Batting Average, On-Base Percentage, Slugging Percentage, At Bats Per HR, At Bats Per GDP, At Bats Per RBI, and K/BB Ratio. One hundred (100) Stolen Base Attempts required for Stolen Base Success %. Any player who appeared in 1995 is eligible for inclusion provided he meets the category’s minimum requirements.
Active Career Pitching Leaders Minimum of 750 Innings Pitched required for Earned Run Average, Opponent Batting Average, all of the Per 9 Innings categories, and Strikeout to Walk Ratio. Two hundred fifty (250) Games Started required for Complete Game Frequency. One hundred (100) decisions required for Win-Loss Percentage. Any player who appeared in 1995 is eligible for inclusion provided he meets the category’s minimum requirements.
BA ScPos Allowed Batting Average Allowed with Runners in Scoring Position.
Baserunners per Nine Innings These are the hits, walks and hit batsmen allowed per nine innings.
Bases Loaded This category shows a player’s batting average in bases loaded situation.
Batting Average Hits divided by At Bats.
Bequeathed Runners Any runner(s) on base when a pitcher leaves a game are considered bequeathed to the departing hurler; the opposite of inherited runners (see below).
Blown Saves This is charged any time a pitcher comes into a game where a save situation is in place and he loses the lead.
Catcher’s ERA The Earned Run Average of a club’s pitchers with a particular catcher behind the plate. To figure this for a catcher, multiply the Earned Runs Allowed by the pitchers while he was catching times nine and divide that by his number of Innings Caught.
Cheap Wins/Tough Losses/Top Game Scores First determine the starting pitcher’s Game Score as follows:
  1. Start with a number of 50
  2. The starting pitcher gets one point for every strikeout he records
  3. After the fourth inning, add 2 points for each additional inning the pitcher goes on to complete. For each strikeout, add one point to your total. For each hit that is permitted, deduct two points. For each earned run that is permitted, subtract 4 points. Add 2 points to account for an unearned run. For each stroll, deduct one point from your total.
If the starting pitcher scores over 50 and loses, it’s a Tough Loss. If he wins with a game score under 50, it’s a Cheap Win.
Cleanup Slugging% The Slugging Percentage of a player when batting fourth in the batting order.
Clutch This category shows a player’s batting average in the late innings of close games: the seventh inning or later with the batting team ahead by one, tied, or has the tying run on base, at bat or on deck.
Complete Game Frequency Complete Games divided by Games Started.
Defensive Batting Average A composite statistic incorporating various defensive statistics to arrive at a number akin to batting average. The formula uses standard deviations to establish a spread from best to worst.
Earned Run Average (Earned Runs times 9) divided by Innings Pitched.
Fast-A Otherwise known as “Advanced A,” these A-level minor leagues are the California League, Carolina League and Florida Stat League.
Favorite Toy The Favorite Toy is a method that is used to estimate a player’s chance of getting to a specific goal in the following example, we’ll say 3,000 hits.Four things are considered:
  1. Needed Hits – the number of hits required to get the desired result. (Of course, this could also be “Need Home Runs” or “Need Doubles” – whatever you choose to call it.)
  2. Years Remaining in the Contract. The formula 24-.6 is used to estimate the number of years that will be required to achieve the target (age). As a result of this approach, players under the age of 20 have 12.0 seasons left on their contract. Players under the age of 25 have nine seasons left on their contract, players under 30 have 6.0 seasons left on their contract, and players over 35 have just three season left on their contract. Any athlete who is currently actively participating in competitive sports is presumed to have at least 1.5 seasons left, regardless of his or her age. Hit Level has been established. For 1996, the established hit level would be calculated by multiplying 1993 hits by two times 1994 hits by three times 1995 hits by six, and then dividing the result by six. In order to be eligible, a player must have an established performance level that is more than three-fourths of his or her most recent performance level—for example, a player who had 200 hits in 1995 cannot have an established hit level lower than 150 hits. Hits that are expected to be made in the future. This is calculated by multiplying the second number (the number of ears left) by the third number (the established hit level)

Once you have obtained the projected remaining hits, the probability of achieving the objective is calculated as (projected remaining hits) divided by (require hits), minus.5. If your “require hits” and your “projected remaining hits” are the same, you have a 50 percent probability of achieving your target using this technique of calculation. If your anticipated remaining hits are 20 percent greater than your required hits, you have a 70 percent probability of achieving your target in time. There are two specific rules, as well as a note:

  1. The probability of a player continuing to develop toward a goal cannot be more than.97 per year. For example, a player cannot calculate that they have a 148 percent probability of completing their goal because this is against the rules.)
  2. The possibility of a player continuing to develop toward the objective cannot be more than.75 each season if his offensive winning percentage is below.500 throughout the season. If a below-average batter is two years away from attaining a goal, his likelihood of accomplishing that objective cannot be proved to be better than nine-sixteenths of a percent, or three-fourths times three-fourths, no of his age.
  3. Rather of using actual figures from a complete season of play, we utilized predicted metrics for 1994 and 1995.
Fielding Percentage (Putouts plus Assists) divided by (Putouts plus Assists plus Errors).
First Batter Efficiency This statistic tells you the batting average allowed by a relief pitcher to the first batter he faces.
GDP per GDP Situation A GDP situation exists any time there is a man on first with less than two outs. This statistic measures how often a player grounds into a double play in that situation.
Go-Ahead RBI Any time a player drives in a run which gives his team the lead, he is credited with a go-ahead RBI.
Ground/Fly Ratio (Grd/Fly) Simply a hitter’s ground balls divided by his fly balls. All batted balls except line drives and bunts are included.
Hold A Hold is credited any time a relief pitcher enters a game in a Save Situation (see definition below), records at least one out, and leaves the game never having relinquished the lead.Note: a pitcher cannot finish the game and receive credit for a Hold, nor can he earn a hold and a save.
Inherited Runner Any runner(s) on base when a relief pitcher enters a game are considered “inherited” by that pitcher.
Isolated Power Slugging Percentage minus Batting Average.
K/BB Ratio Strikeouts divided by Walks.
LateClose A LateClose situation meets the following requirements:
  1. During the seventh inning or later, the batting side is either up by one run, tied, or has a possible tying run on base, at the plate, or on deck
  2. The game is over
Note: this situation is very similar to the characteristics of a Save Situation.
Leadoff On Base% The On-Base Percentage of a player when batting first in the batting order.
No Decision (ND) The result when a starter is credited with neither a win nor a loss.
OBP+SLUG (OPS) On-base percentage plus slugging percentage.
Offensive Winning Percentage (OWP) The Winning Percentage a team of nine Fred McGriffs (or anybody) would compile against average pitching and defense. The formula: (Runs Created per 27 outs) divided by the League average of runs scored per game. Square the result and divide it by (1+itself).
On Base Percentage (Hits plus Walks plus Hit by Pitcher) divided by (At Bats plus Walks plus Hit by Pitcher plus Sacrifice Flies).
Opponent Batting Average Hits Allowed divided by (Batters Faced minus Walks minus Hit Batsmen minus Sacrifice Hits minus Sacrifice Flies minus Catcher’s Interference).
Outfielder Hold Percentage A statistic used to evaluate outfielders’ throwing arms. “Hold Percentage” is computed by dividing extra bases taken (by baserunners) by the number of opportunities. For example, if a single is lined to center field with men on first and second, and one man scores while the other stops at second, that is one extra base taken on two opportunities, a 50.0 hold percentage.
PA* The divisor for On Base Percentage: At Bats plus Walks plus Hit By Pitcher plus Sacrifice Flies; or Plate Appearances minus Sacrifice Hits and Times Reached Base on Defensive Interference.
PCS (Pitchers’ Caught Stealing) The number of runners officially counted as Caught Stealing where the initiator of the fielding play was the pitcher, not the catcher. Note: such plays are often referred to as pickoffs, but appear in official records as Caught Stealings. The most common pitcher caught stealing scenario is a 1-3-6 fielding play, where the runner is officially charged a Caught Stealing because he broke for second base. Pickoff (fielding play 1-3 being the most common) is not an official statistic.
Percentage of Pitches Taken This tells you how often a player lets a pitch go by without swinging.
Percentage of Swings Put In Play This tells you how often a player hits the ball into fair territory, or is retired on a foul-ball out, when he swings.
Pickoffs (Pk) The number of times a runner was picked off base by a pitcher.
Pivot Percentage The number of double plays turned by a second baseman as the pivot man, divided by the number of opportunities.
PkOf Throw/Runner The number of pickoff throws made by a pitcher divided by the number of runners on first base.
Plate Appearances At Bats plus Total Walks plus Hit By Pitcher plus Sacrifice Hits plus Sacrifice Flies plus Times Reached on Defensive Interference.
Power/Speed Number A way to look at power and speed in one number. A player must score high in both areas to earn a high Power/Speed Number.The formula: (HR x SB x 2) divided by (HR + SB).
Quality Start Any start in which a pitcher works six or more innings while allowing three or fewer earned runs.
Quick Hooks and Slow Hooks A Quick Hook is the removal of a pitcher who has pitched less than 6 innings and given up 3 runs or less. A Slow Hook occurs when a pitcher pitches more than 9 innings, or allows 7 or more runs, or whose combined innings pitched and runs allowed totals 13 or more.
Range Factor The number of Chances (Putouts plus Assists) times nine divided by the number of Defensive Innings Played. The average for a Regular Player at each position in 1997:
  • 5.00 points for second base, 2.67 points for third base, 4.56 points for shortstop, and 1.99 points for left field, 2.55 points for center field, and 2.06 points for right field.
Relief Points (Pts) Wins plus saves minus losses
Run Support Per 9 IP The number of runs scored by a pitcher’s team while he was still in the game times nine divided by his Innings Pitched.
Runs Created A way to combine a batter’s total offensive contributions into one number. The formula:(H + BB + HBP – CS – GIDP) times (Total Bases +.26(TBB – IBB + HBP) +.52(SH + SF + SB)) divided by (AB + TBB + HBP + SH + SF).
Runs/Times on Base This is calculated by dividing Runs Scored by Times on Base
Save Percentage Saves (SV) divided by Save Opportunities (OP).
Save Situation A Relief Pitcher is in a Save Situation when upon entering the game with his club leading, he has the opportunity to be the finishing pitcher (and is not the winning pitcher of record at the time), and meets any one of the three following conditions:
  1. He enters the game with a lead of no more than three runs and has the opportunity to pitch for at least one inning, or he enters the game with the potential tying run on base, at bat, or on deck, regardless of the count, or he pitches three or more innings regardless of the lead and the official scorer awards him a save
  2. Or he pitches three or more innings regardless of the lead and the official scorer awards him a save
SBA Stolen-base attempts against a catcher
SB Success% Stolen Bases divided by (Stolen Bases plus Caught Stealing).
Secondary Average A way to look at a player’s extra bases gained, independent of Batting Average. The formula:(Total Bases – Hits + TBB + SB) divided by At Bats.
Slow-A Otherwise known as “Regular A,” these full-season minor leagues contain less-experienced professional players. The Slow-A leagues are the Midwest League and South Atlantic League (Sally).
Slugging Percentage Total Bases divided by At Bats.
Stolen Base Percentage Allowed This figure indicates how successful opposing baserunners are when attempting a stolen base. It’s stolen bases divided by stolen-base attempts.
Times on Base Hits plus walks plus hit by pitch
Total Bases Hits plus Doubles plus (2 times Triples) plus (3 times Home runs).
Win-Loss Percentage or Winning Percentage Wins divided by (Wins plus Losses).
Zone Rating Simply the percentage of balls fielded by a player in his typical defensive “zone,” as measured by STATS reporters.
Formulas and Definitions
PA AB + BB + HBP + SF + SH + defensive interference
PA* AB + BB + HBP + SF
Total Bases
AVG H/AB
OBP (H + BB = HBP)/(AB + BB + HBP + SF)
SLG TB/AB
Breakdown Categories
Ahead/Behind in Count For hitters, ahead in count includes 1-0, 2-0, 3-0, 2-1 and 3-1. Behind in count for hitters includes 0-1, 0-2, 1-2 and 2-2. The opposite is true for pitchers.
Day/Night Officially, night games in the National League are those that start after 5:00 pm, while night games in the AL begin after 6:00 pm. Therefore, a game at 5:30 in Yankee Stadium is a day game while one in Shea Stadium at the same time is a night game. We avoid this silliness by calling all games starting after 5:00pm night games.
First Pitch Refers to the first pitch of a given at bat, and any walks listed here are intentional walks.
Grass/Turf Grass is grass. Turf is artificial turf.
Groundball/Flyball Ratio A hitter’s stats against pitchers that induce mostly grounders or flies, respectively. If the ratio is less than 1.00, then he is a Flyball hitter. If it is greater than 1.50, he is a Groundball hitter. Anything else is classified as neutral. Same cutoffs apply for classifying pitchers. Anyone with less than 50 plate appearances is automatically neutral.
First Inning Pitched Describes the result of the pitcher’s work until he recorded three outs.
Inning 1-6 and Inning 7+ These refer to the actual innings in which a pitcher worked.
None On/Out Refers to situation when there are no outs and the bases are empty (generally leadoff situations).
None On/Runners On Describes the status of the baserunners
Number of Pitches This section shows the results of balls put into play while his pitch count was in that range.
Pitcher/Batter Match-Ups The following conditions must be met before a player is added to the list:
  • For a batter to be considered a “Hits Best Against” candidate, there must be at least 10 plate appearances between him and the pitcher
  • And for a pitcher to be considered a “Pitches Best Against” candidate, the batter must have a.300 batting average against the pitcher, and the pitcher must limit the batting average of the batter to under.250.
Thus, not all hitters will have five pitchers that qualify and not all pitchers will have five batters who qualify.
Scoring Position At least one runner must be at either second or third base.
Vs. 1st Batr (Relief) Describes what happened to the first batter a reliever faces.

Imagine Sports Baseball

Return to the Reference Index from the Glossary Any metric is compared to the League and is given as an index in BATTING+=. (multiplied by 100). Example: If an outfielder hits.330 in a league where the rest of the team hits.300, his batting average plus plus (BA+) is 330/300 x 100 = 110. 2B is an abbreviation for doubles. Triples are abbreviated as 3B. AB is an abbreviation for At Bats. BA is an abbreviation for Batting Average. H/AB BB stands for Base on Balls or Walk. BBF is the Base on Balls Factor (PA/BB) in baseball.

  1. CS stands for Caught Stealing (caught stealing numbers are only available for the seasons between 1914-16 and after 1919 in the AL, in 1915, 1920-25 and after 1950 in the NL) The letters G and GIDP stand for Grounded into Double Plays and GamesGDP, respectively.
  2. Hits are represented by the letter H.
  3. HRF is an abbreviation for Home Run Factor (AB/HR).
  4. K is the number of strikeouts.
  5. The On-Base Percentage is calculated as follows: (H + BB + HBP) / (AB + BB + SF + HBP) (SF and HBP are assumed to be zero if unavailable; see SF and HBP below) On-base percentage plus slugging percentage equals OPS.
  6. It is an effort to quantify the whole of a player’s offensive statistics with a single number.
  7. It often includes some positive value for things like hits, walks, steals, home runs, and other similar things, as well as some negative value for things like outs, caught stealing, and GIDP, among other things.
  8. The most simple is (H + BB) * (TB) divided by Plate Appearances, which is the most common (PA).
  9. RC/27 = Runs Created per 27 Outs – The amount of runs scored every nine innings (27 outs) by a team consisting of eight players who are all of the same position.
  10. In this case, the formula is: ((RC x 3 x LgIP) / (2 x LgG))/(AB – H +SH+ SF+ CS+ GIDP.) RC600 is the number of runs generated for every 600 at bats (RC/(ab/600)).

SEC = Secondary Average:(TB – H + TBB + SB – CS) / ABSF = Sacrifice Flies / SEC = Secondary Average (first counted in 1954; included in Sacrifice Hits up to 1953) SH is an abbreviation for Sacrifice Hits or Bunts (first counted in 1895 and included Sacrifice Flies until 1953) A Slugging Percentage is calculated as follows: Total Bases/At Bats (see TB below) SO = Strikeouts (also known as K’s) (hit-and-miss between 1882 and 1912) TB is an abbreviation for Total Bases: Singles plus 2x2B plus 3x3B plus 4xHR PITCHING+= is a function that compares any stat to the League, and returns an index (multiplied by 100).

Consider the following scenario: A pitcher has a 3.00 ERA in a league with a 4.00 ERA; his ERA+ would be 300/400 x 100 = 75; but we would present it as 125 since we express all positive statistics as greater than 100 and all negative ones as less than 100.

Bases on Balls per nine innings (BB9) and Bases on Balls per nine innings (BB/9) BF, BFP are abbreviations for Batters Faced by Pitcher.

BR9 is an abbreviation for Base Runners per 9 innings.

When a pitcher enters a save situation and loses the lead, the scenario is called a blown save.

ER stands for Earned Runs.

A metric that calculates what a pitcher’s ERA should have been based on his pitching performance is known as Component Earned Run Average (ERC).

If the ERC is less than 2.24, the following modifications are made to the formula: ERC=(((H+BB+HBP)*PTB)/(BFP*IP)) *9*.75 G= Games that have been pitched GF denotes that the games have been completed.

Hits are represented by the letter H.

HBP is an abbreviation for Hit By Pitch.

It should be noted that a pitcher cannot finish a game while also receiving credit for a Hold, nor can he earn both a Hold and a Save in the same game.

IBB is an abbreviation for Intentional Bases on Balls.

K is the number of strikeouts.

L is an abbreviation for losses.

AVG = Opposition Batting Average:H/(BFP-BB-HB-SH-SF-CI) OAVG = Opposition Batting Average:H/(BFP-BB-HB-SF-CI) OOBP is an abbreviation for Opposition on Base Percentage.

PTB is an abbreviation for Pitcher’s Total Bases (see ERC) In baseball, a quality start is any start in which a pitcher goes six or more innings while allowing no more than three earned runs in total.

Sacrifice Flies are abbreviated as SF.

SO is an abbreviation for Strikeouts.

This occurs when he satisfies any one of the three requirements listed below: When he has a lead of no more than three runs and has the potential to throw for at least one inning, the situation is considered to be in his favor.

SVOP is an abbreviation for “Save Opportunities” (see SV, definition of Saves) A win is defined as (walks + hits) innings pitched divided by the total number of innings pitched.

WP is an abbreviation for Wild Pitches.

When a fielder’s Range Factor is 3.3 in a league where his position’s Range Factor is 3, his RF+ will be equal to 330/300 multiplied by 100, which is 110.

The average is calculated as follows: (PO + A) / (PO + A + E).

It is the percentage of times a battedball is turned into an out by a team’s fielders, excluding homeruns, that is recorded as the defensive efficiency record.

Double Plays are abbreviated as DP.

G = Games are being played at this time.

PK= The number of times a pitcher or catcher has made a pickoff throw that has resulted in a runner being successfully retired from the game.

PO/9 is the number of putouts per nine innings.

In baseball, range factor is defined as ((PO + A) multiplied by 9) divided by the number of innings played.

INJURIE A player’s total number of days out injured is represented by the number SINJ:DAYS.

A player’s injury rate is determined by the number of innings he or she has played or pitched per injury (regardless of length) he or she has experienced (the higher the figure, the less common the player’s ailments have been).

INJ:MAXDAYS= The number of days a player has been out with an injury. TOTAL INJ_NUM= The total number of injuries that the player has suffered (regardless of how long they have lasted). Imagining Sports in the Year 2020

Leave a Reply

Your email address will not be published.