## What Does OPS Mean in Baseball – What is a Good OPS?

Baseball may just be the perfect sport for math nerds, according to some experts. The OPS package, for example, incorporates formulae from various statistics, which makes it really fascinating to use. However, despite the fact that it appears to be a convoluted method, the outcome is clear: calculating OPS, or on-base plus slugging, may be a rapid way to determine a player’s true contribution to his club. OPS (on-base percentage) is a unique baseball statistic that is explained in detail in this article.

## How is OPS Calculated?

OPS is one of those statistics that must be interpreted in conjunction with other data in order to make sense. To compute On-base plus slugging, we’ll need two statistics: first, the number of times a player has reached base.

- Percentage of time spent on base (OBP). It is a cold, hard statistic that measures how many times a player gets on base by any method in comparison to the total number of at-bats they have had throughout their career. It makes no difference how a player gets on base in the OBP game. Were they tainted with something? Walked? Did they make contact? It everything contributes to their overall batting average (OBP)
- Slugging average (SLG). Unlike other stats, this one is a system that measures the quality of a player’s strikes. The batting average of a baseball player, for example, does not tell you how often they hit the ball
- It just tells you how often they scored a hit. SLG includes the quality of those hits into the calculation by including the amount of bases reached as a component of the equation. An individual player might theoretically have a slugging average of 4.000, which would result in an optimum ratio of home runs to at-bats. That is to say, if a player only has one at-bat and hits a home run, his slugging average will be 4.000 points higher than normal. An SLG of 1.000 indicates that a single was hit in a single at-bat, and so on.

Keep in mind that there are some uncommon instances (such as sacrifice flies) that do not count toward at-bats and, as a result, have no meaningful influence on either of these statistics. The terms OBP and SLG are certainly familiar to you; OBP is a rate measure, and SLG is a rate and quality metric. When you combine the two metrics, on-base plus slugging, you get a more complete picture of a player’s ability to smash the ball hard. What is the formula for calculating it? Simply add the two numbers together.

## What is a Good OPS in Baseball?

For fans of Major League Baseball, it might be difficult to make sense of how OPS works on sometimes. What does it have to say about the look of the plates? What is the overall quality of the ballpark in which they are playing during the season? What is the total number of bases they have amassed? To obtain a real understanding of what a good OPS is, it’s helpful to first establish a standard of comparison. Here are a few of the top OPS in Major League Baseball history:

- With an OPS of 1.1636, Babe Ruth is the all-time leader
- Mike Trout is among the all-time OPS greats who are still active, with a career average of around 1.0000
- Barry Bonds ranks 4th on the list as of 2020, with an OPS of approximately 1.05
- Lou Gehrig ranks third with an OPS of 1.07
- And Ted Williams of the Boston Red Sox is the only other player outside of Babe Ruth who has an OPS of 1.1 or higher over his This is among players who have accumulated at least 3,000 at-bats.

Of course, this only provides us only one end of the range to work with. What about the overall average of the league? A look at the data for Major League Baseball reveals that the league average in on-base plus slugging is often between 0.700 and 0.800.

## What is the Highest OPS in Baseball History?

Already, we’ve shown you the player who has the greatest careerOPS, Babe Ruth of the New York Yankees, in our previous post. His 1.1636 OPS over that many at-bats may never be surpassed, putting him in the running for the title of greatest hitter of all time. However, this is merely one method of looking at the stats. Season-to-season comparisons of metrics such as on-base percentage (OPS) are important because they reveal exactly how spectacularly certain players have reached the pinnacle of their careers.

- Babe Ruth, 1920: 1.3791
- Barry Bonds, 2001: 1.3785
- Babe Ruth, 1921: 1.3586
- Babe Ruth, 1923: 1.3089
- Babe Ruth, 2004: 1.4217
- Babe Ruth, 2002: 1.3807
- Bab

Eventually, Ted Williams enters the picture, having posted the 7th-best offensive season in baseball history. When Rogers Hornsby appears on the list, it is at the thirteenth position that a fourth player is included.

## What about High OPS Seasons in Recent Years?

- Juan Soto of the Washington Nationals had the best OPS in 2020, batting 1.1846 with a 1.1846 on-base percentage. That was good enough for the 25th greatest OPS season in baseball history
- In 2019, Christian Yelich of the Milwaukee Brewers hit 1.1001, which was strong enough for a season in the top 100 of all-time OPS rankings

## Are there Better Stats than OPS?

A hitter’s talent can be evaluated by adding up his or her slugging % or slugging average with his or her on-base percentage, which some may argue is a rudimentary method of doing so. However, it is possible that there is more to it than you realize. After all, on-base percentage (OBP) includes at-bats, walks, sacrifice flies, and the number of times a batter is hit by a pitch. Overall, the OPS statistic takes a variety of factors into consideration, including at-bats and total bases. Hits, walks, HBP, and even sacrifice fly are all accounted for in the overall calculation.

Optimal team performance (OPS) is popular because when calculated for an entire team, it has a strong correlation with how many runs the team has scored. This is why many people consider it to be an effective tool to evaluate a batter’s offensive output on a consistent basis.

## What about OPS+?

The OPS+ statistic, which takes this statistic and “normalizes” it across the league, is also available. A player’s OPS+ takes into account external factors such as the ballpark in which he or she was hitting. It is calculated such that an OPS of 100 represents the league average, which provides people with an immediate understanding of how a player’s offensive productivity compares to the rest of the team. As a result, the statistics of a Cubs player may differ from those of a Dodgers player, who in turn may differ from the statistics of a Cardinals player or a White Sox player.

When a player is free agent, OPS+ is important because he or she may benefit from primarily playing in a smaller ballpark where it is easier to hit home runs, which can increase his or her value.

## Conclusion

The on-base average and slugging percentage, when combined, can provide useful information on a player’s offensive performance in the big leagues. However, like with any other sabermetrics in baseball, it’s not always simple to quantify everything without actually seeing it firsthand in action.

## Similar Posts

Overall, considering the on-base average and combining it with the slugging percentage can provide useful information about a player’s offensive ability. However, like with any other aspect of baseball sabermetrics, it is not always simple to quantify everything without actually witnessing it.

## On-base plus slugging – Wikipedia

A player’s on-base plus slugging (OPS) % is derived as the sum of his on-base percentage and slugging percentage, and it is a sabermetric baseball statistic. The ability of a player to get on base as well as hit for power, two crucial offensive qualities, are both illustrated in this illustration. Among Major League Baseball, a batter with an OPS of.800 or greater is considered to be in the highest tier of hitters. Typically, the league leader in OPS will have a score that is close to, and occasionally even above, 1.000.

## Equation

Where OBP represents on-base percentage and SLG represents slugging average, we have the following equation. These averages have been established. – the numerator “H + BB +HBP” essentially means “number of trips to first base at the very least” – the denominator “AB + BB + SF +HBP” basically means “total plate appearances,” but does not include sacrifice bunts. A hitter is not granted a “AB” despite the fact that he steps to the plate (BB or HBP) or puts the ball into play and is ruled out, but the action allows a run to score (as in the SF scenario) even though he has made a trip to the plate.

andwhere:

- H=hits
- Bases on balls (abbreviated as BB) is an abbreviation for bases on balls. HBP is an abbreviation for times struck by pitch. AB stands for at bats. SF stands for sacrifice fly. TB is an abbreviation for total bases.

OPS may be expressed as follows in a single equation:

## History

The Hidden Game of Baseball, written by John Thorn and Pete Palmer in 1984, was the first book to make on-base plus slugging popular. The New York Times then began publishing the names of the top performers in this statistic in its weekly “By the Numbers” box, a feature that ran for four years and was widely adopted. Peter Gammons, a baseball journalist, popularized and evangelized the statistic, which was then picked up by other writers and announcers. Its popularity grew over time, and by 2004, it was featured on baseball cards produced by Topps Baseball Cards.

Examples include Thorn’sTotal Baseballencyclopedia and theStrat-O-Matic Computer Baseballgame, both of which contained manufacturing information in their early editions.

This phrase is no longer in common usage. The availability of its components, OBP and SLG, as well as the fact that team OPS corresponds highly with the number of runs scored, contributed to the rise in popularity of OPS.

## An OPS scale

Bill James, in his essay titled “The 96 Families of Hitters,” classifies hitters into seven separate groups based on their offensive power:

Category | Classification | OPS range |
---|---|---|

A | Great | .9000 and higher |

B | Very good | .8334 to.8999 |

C | Above average | .7667 to.8333 |

D | Average | .7000 to.7666 |

E | Below average | .6334 to.6999 |

F | Poor | .5667 to.6333 |

G | Very poor | .5666 and lower |

This basically converts the ordinal scale into a seven-point ordinal scale for OPS. It is possible to provide a subjective reference for OPS numbers by substituting quality labels for the A–G categories, such as excellent (A), very good (B), good (C), average (D), fair (E), bad (F), and very poor (G).

## Leaders

With at least 3,000 plate appearances through August 5, 2020, the top 10 Major League Baseball players in terms of lifetime OPS were as follows:

- Babe Ruth has a 1.1636 rating
- Ted Williams has a 1.1155 rating
- Lou Gehrig has a 1.0798 rating
- Barry Bonds has a 1.0512 rating
- Jimmie Foxx has a 1.0376 rating
- Hank Greenberg has a 1.0169 rating
- Rogers Hornsby has a 1.0103 rating
- Mike Trout has a 1.0009 rating
- Manny Ramirez has a 0.9823 rating
- Mark McGwire has a 0.9823

The top four hitters were all left-handed, which was a rarity. Jimmie Foxx has the best career on-base percentage (OPS) of any right-handed batter in baseball history. The following are the best 10 single-season performances in Major League Baseball (all by left-handed hitters):

- 1.4217 for Barry Bonds in 2004
- 1.3807 for Barry Bonds in 2002
- 1.3791 for Babe Ruth in 1920
- 1.3785 for Barry Bonds in 2001
- Babe Ruth in 1921
- Babe Ruth in 1923
- 1.2875 for Ted Williams in 1941
- 1.2778 for Barry Bonds in 2003
- Babe Ruth in 1927
- Ted Williams in 1957
- 1.2582 for Babe Ruth in 1927
- 1.2566 for Ted

During the 1925 season, Rogers Hornsby batted 1.2449, which ranked him 13th on the all-time list of single-season marks for right-handed hitters. For right-handed pitchers since 1935, Mark McGwire’s 1.2224 OPS in 1998 ranks 16th all-time and is the greatest single-season mark for a right-hander.

## Adjusted OPS (OPS+)

OPS+, or modified OPS, is a metric that is closely connected to OPS. OPS+ is an adjusted OPS that takes into account the park and league in which the player played, but does not take into account fielding position. The league average is defined as having an OPS+ of 100 points. An OPS+ of 150 or above is exceptional, and a score of 125 or higher is very good, but an OPS+ of 75 or below is mediocre. OPS+ may be calculated using the following equation:where *lgOBP is the league’s park adjusted OBP (excluding pitchers hitting) and *lgSLG is the league’s park adjusted SLG (excluding pitchers hitting).

Due to the additive nature of the two components of OPS+, for example a player with an OBP and SLG that are both 50 percent over average in both categories will have an OPS+ of 200 (twice the league average OPS+), while having an OPS that is only 50 percent above the league average.

### Leaders in OPS+

Through the completion of the 2019 season, the following players ranked in the top twenty in their respective career OPS+ rankings (minimum 3,000 plate appearances):

- Babe Ruth has 206 hits
- Ted Williams has 190
- Barry Bonds has 182
- Lou Gehrig has 179
- Mike Trout has 176
- Rogers Hornsby has 175
- Mickey Mantle has 172
- Dan Brouthers has 170
- Joe Jackson has 170
- Ty Cobb has 168
- Pete Browning has 163
- Jim Foxx has 163
- Mark McGwire has 163
- Dave Orr has 162
- Stan Musial has 159
- Hank Greenberg

These are the only players on this list who are exclusively right-handed batters: Browning, Hornsby, Foxx, Trout, McGwire, Allen, Mays, and Thomas are the only players on this list who are exclusively right-handed batters.

Mantle is the only player in the group who can transition from one position to another. The following were the best single-season performances:

- Barry Bonds has 268 hits in 2002
- Barry Bonds has 263 hits in 2004
- Barry Bonds has 259 hits in 2001
- Fred Dunlap has 258 hits in 1884 *
- Babe Ruth has 256 hits in 1920
- Babe Ruth has 239 hits in 1921
- Babe Ruth has 239 hits in 1923
- Ted Williams has 235 hits in 1941
- Ted Williams has 233 hits in 1957
- Ross Barnes has 231 hits in 1876 **
- Barry Bonds has 231 hits in 2003

* – Fred Dunlap’s remarkable 1884 season took place in the Union Association, which some baseball experts believe is not a legitimate major league in the traditional sense. It is possible that Ross Barnes was helped by a rule that declared a bunt fair if it rolled in fair territory for the first time. When this regulation was lifted, he did not perform nearly as well as he had previously, but injuries may have played a major role in this, since his fielding numbers also fell. If Dunlap’s and Barnes’ seasons were to be removed from the list, two more Ruth seasons (1926 and 1927) would be added to the list.

Barnes, the lone right-handed hitter on the list, would also be eliminated as a result of this.

## Criticism

Despite the fact that it is a straightforward computation, OPS is a contentious statistic. On-base percentage and slugging percentage are both taken into consideration when calculating OPS. On-base %, on the other hand, is a greater predictor of run production. Linear weights are used to construct statistics such as thewOBA, which capitalizes on this distinction. Furthermore, the components of OPS are not always equal (for example, league-average slugging percentages are frequently 75–100 points higher than league-average on-base percentages).

## See also

- For further information, visit the Wayback Machine
- John Thorn and Pete Palmer, “The Hidden Game of Baseball,” on pages 69-70
- Alan Schwarz, “The Numbers Game,” on pages 165-233
- Mr. James and Mr. Bill The 96 Hitter Families have been identified. The Bill James Gold Mine, 2009, p.24
- “Career LeadersRecords for OPS”.Baseball-Reference.com. RetrievedJuly 26,2019
- “Single-Season Records for OPS”.Baseball-Reference.com. RetrievedJuly 26,2019
- “Career LeadersRecords for Adjusted OPS+”.Baseball-Reference.com. RetrievedJuly 26,2019
- “Single- Michael Lewis is a writer who lives in the United Kingdom (203). Moneyball: The Art of Winning an Unfair Game
- “2019 Major League Baseball Standard Batting”.Baseball-Reference.com

## References

- John Thorn and Pete Palmer are co-authors of this work (1984). Baseball’s “Secret Game” is a little known fact. Schwarz, Alan
- Doubleday & Company, ISBN 0-385-18283-X
- Doubleday & Company, ISBN 0-385-18283-X (2004). The Game of Numbers. Books published by Thomas Dunne Books (ISBN 0-312-32222-4)

## How to Calculate OPS in Baseball

Baseball statistics have long been a significant aspect of the game. When talking about baseball and its many leagues, terms such as batting average, runs batted in, hits, runs, and more have become standard. However, as baseball has progressed throughout the years, the statistics have gotten very intricate. It might be difficult to keep up with the new-age language, which includes statistics such as on-base percentage (OBP), slugging percentage (SLG), and wins above replacement (WAR), among others.

Initially glanced at, it appears to be a difficult figure to compute and comprehend, however it can be simply broken down into a series of steps.

## 1. Understanding and Calculating On Base Percentage

A significant component of baseball has always been statistics. When talking about baseball and its many leagues, terms such as batting average, runs batted in, hits, runs scored, and so on have become ubiquitous. In recent years, however, as baseball has progressed, the statistics have gotten enormously more complex. It might be difficult to keep up with the new-age language, which includes statistics such as on-base percentage (OBP), slugging percentage (SLG), and wins above replacement (WAR) among others.

Initially glanced at, it appears to be a difficult figure to compute and understand, however it can be simply broken down into a series of steps.

## 2. Understanding and Calculating Slugging Percentage

The slugging percentage, abbreviated as SLG, is the other important statistic in the calculation of the OPS. Although similar to calculating on-base percentage (OBP), SLG is used to assess the overall quality of hits made by a player rather than amount of base hits made. It does this by giving a numerical value to each base (single = 1, double = 2, etc.) and assessing the type of hit a player receives when he smacks the ball. The formula for calculating SLG is Singles + Doubles x 2 + Triples x 3, + Home Runs x 4 divided by the number of at bats.

## 3. Calculating and Understanding OPS

So, now that we’ve learned how to compute OBP and SLG, it’s important to remember that OPS is basically On Base Percentage plus Slugging, which makes it much simpler to calculate. To calculate on-base percentage and slugging percentage for a player, multiply their on-base percentage by their slugging percentage. For example, a player with an OBP of.280 and an SLG of.500 will have an OPS of.780 if he also has an OBP of.280 and an SLG of.500. This statistic practically reflects the best of both worlds between the two statistics because it evaluates both the amount of time a player spends on base and the quality of their hits.

## On Base Plus Slugging (OPS) All Time Leaders on Baseball Almanac

When Branch Rickey and Allan Roth invented the on base percentage statistic in the 1950s, they were looking for a way to track the number of times a player reached any base. It did not initially include the sacrificial fly designation but when it was formally modified in 1984 it emerged using the formula described above. Later, Slugging Average was established, and the two were merged to form On Base Plus Slugging, which stands for On Base plus Slugging. The player must have played a minimum of 1,000 career games in order to be included on this list of the one-thousand greatest on base plus slugging leaders.

- “Similar to a dog who has never been given table scraps.
- I’m pretty curious.
- I’m hoping to be able to do so this year, and I’m hoping it will be possible.
- I have set a one-year goal for myself.” – Todd Helton in the Baseball Digest (May 2004) (May 2004) Babe Ruth owns the record for most wins in the American League, and Manny Ramirez is the only current player who “appears” to be in with a chance.
- Perhaps the 1.000 OPS Club should be established by Baseball Almanac as a new “club” inside the organization.

What do you think of the on-base plus slugging percentage? Like this one, do you find it interesting to argue and debunk complicated statistics like this one? Bring your friends and family to join us onBaseball Fever, where we have a forum dedicated to the discussion of SABRMetric statistics.

## What Is OPS in Baseball? Well, It Measures…

There are several approaches of evaluating baseball players, as well as numerous schools of thought on the most effective method of doing so. The earned run average (ERA) of a pitcher is widely considered to be the most reliable conventional statistic for determining his or her performance. Ops, on the other hand, has become a common measure for evaluating hitters in order to quantify their overall effectiveness. As a result, what exactly is OPS in baseball? On-base plus slugging (also known as OPS) is a statistic that attempts to assess a hitter’s overall effectiveness by combining two figures that reflect how well he is at reaching base and hitting for power: on-base percentage and slugging percentage.

In the meanwhile, let’s get down to business and answer the burning question.

## What Is a Batter’s OPS?

In order to evaluate baseball players, there are many different approaches that may be used, and many different schools of thought on the best way to go about it. To measure the performance of a pitcher, the earned run average (ERA) is usually the best traditional metric to use. Ops, on the other hand, has become a common measure for evaluating hitters in order to determine their overall effectiveness. So, what exactly is the OPS in baseball? Read on to find out. On-base plus slugging, sometimes known as OPS, is a statistic that attempts to assess a hitter’s total performance by combining two figures that reflect how well he is at reaching base and hitting for power: on-base percentage and slugging %, respectively.

Between now and then, let’s get down to business and answer the burning question.

## How Do You Calculate OPS?

As we previously discussed, On-Base Plus is a type of military base. Slugging percentage, often known as on-base percentage and slugging percentage, is the sum of a player’s on-base percentage and slugging percentage. Put another way, you can compute an OPS by simply putting the two numbers together. The on-base percentage (OPS) of a hitter cannot be calculated, however, without these data. Because the complete OPS calculation is lengthy and difficult to compute on its own, it is preferable to calculate OBP and SLG separately and then combine them.

- In order to do so, sum up all of the hits, walks, and hit by pitches, then divide the total by the number of at-bats plus walks, sacrifice flies, and hit by pitches to get the on-base percentage.
- As a consequence, the calculation for OBP looks somewhat like this: At bats + walks + hit by pitch / (at bats + walks + hit by pitch + sacrifice flies) = On Base Percentage (OBP).
- Simply combine the two figures together to obtain the overall probability of success (OPS) for each situation.
- Using the on-base percentage calculation, the values for hits (30), walks (10), and HBPs (5) total up to 45 when multiplied together.
- The hitter’s on-base percentage is calculated by dividing 45 by 120, which equals.375.
- On the batting average side, the total bases from singles (15), doubles (10), triples (15), and home runs (20) add up to a total of a.600 slugging percentage.

For the purposes of illustration, the entire equation is written as follows: With all of that work spread out in front of you, it’s usually better to compute the two figures individually in order to keep everything a bit more organized.

## Why Is OPS a Good Stat?

On-Base Plus, as we discussed previously, is a type of military pay system that pays for on-base training. The on-base percentage and slugging percentage of a player are added together to form slugging percentage or OPS. Put another way, you can compute an OPS by just putting the two numbers together. A batter’s OPS cannot be calculated if these statistics are not available for him. Because the full OPS calculation is very lengthy and difficult to compute on its own, it is preferable to calculate OBP and SLG separately before combining them.

- In order to do so, sum up all of the hits, walks, and hit by pitches, then divide the total by the number of at-bats plus walks, sacrifice flies, and hit by pitches to obtain the on-base percentage.
- Therefore, the following equation may be used to calculate the OBP: In baseball, OBP is the sum of hits, walks, and pitches hit by pitch divided by the sum of at-bats, walks, pitches hit by pitch, and sacrificies flies.
- Simply combine the two values together to obtain the overall probability of success (OPS) value.
- With the on-base percentage calculation in mind, the total number of hits (30), walks (10), and HBPs (5) equals 45.
- The on-base percentage of the batter is calculated by dividing 45 by 120.
- Singles (15), doubles (10), triples (15), and home runs (20) add up to 60, which when divided by the total number of at-bats (100) results in a slugging percentage of.600.
- This is how the entire equation looks for the sake of reference: It’s usually advisable to compute the two figures individually once all that work has been done to keep everything a bit more orderly in the long run.

## What Is a Good OPS in Baseball?

According to what we discussed previously, OPS standards can shift over time as leagues and ballparks evolve. But there are still broad numbers that are deemed to be excellent or harmful in some way, shape or form. At any point in time in history, an OPS of over.800 has been deemed good, with an OPS of over.900 considered very good, and an OPS of 1.000 or greater considered extraordinary. On the other hand, an OPS of less than 700 is regarded bad, and anything less than 600 is considered extremely poor.

## When Did OPS Become a Stat in Baseball?

As previously stated, OPS standards may shift over time as leagues and ballparks evolve. This is especially true for pitchers. In any case, there are certain generic numbers that are deemed to be excellent or terrible in some way. Historically, an OPS of over.800 has been regarded good, with an OPS of over.900 considered very good, and an OPS of 1.000 or greater considered extraordinary. However, an OPS of less than 700 is deemed bad, and anything less than 600 is considered extremely poor on the other hand.

## Highest Career OPS

Babe Ruth, who is in the Hall of Fame, holds the record for the best career On-base Plus Slugging percentage with a 1.164 OPS throughout his 22-year professional baseball career. Seven batters have concluded their careers with an OPS greater than 1.000, with Mike Trout now straddling the line between the two categories.

## Highest Single Season OPS

Barry Bonds owns the single-season record for the greatest On-Base Plus Slugging percentage (1.422) with a mind-boggling 1.422 in 2004. He also established an MLB record with an on-base percentage of.609 and a slugging percentage of.812, both of which were the highest ever recorded.

## What Is Batting Average?

The batting average demonstrates a player’s ability to put the ball in play and advance to the next base. The batting average of a hitter is derived by dividing the total number of hits he has received by the total number of at-bats he has had. It is important in measuring a player’s performance at the bat, but it does not take into consideration walks, sacrifices, and other factors.

### Related Articles

- What is the definition of a Designated Hitter in baseball? What is the definition of MVR in baseball? A Comprehensive Guide to the Rule
- What Is the Meaning of WAR in Baseball? The Complete Guide to Getting Started
- What is the definition of WHIP in baseball
- In baseball, the term “left on base” (LOB) refers to the number of runners who have been left on base.

## What Does Ops Mean In Baseball? Details Explained

The most recent update was made on July 3, 2021 by Percentage that is correct! Ops adds the on-base percentage and slugging percentage together to come out with a value that identifies them as one. The Ops can combine how well a batter can hit for average and power with how well he can hit for a good strikeout rate. It is also employed in the examination of pitchers. When this is done, it is referred as as Ops against. The on-base percentage (sometimes known as the slugging percentage) is a sabermetric statistic in baseball that is used to measure a player’s overall performance.

## Ops Scale

Categories | Classifications | Ops Range |

A | Great | Higher than.9000 |

B | Very good | Ranging from.8334 to.8999 |

C | Above average | Ranging from.7667 to.8333 |

D | Average | Ranging from.7000 to.7666 |

E | Below average | Ranging from.6334 to.6999 |

F | Poor | .5667 to.6333 |

G | Very poor | Lower than.5666 |

This table separates the Ops categories into seven groups on a seven-point ordinal scale.

Quality labels such as excellent(A), very good(B), above average(C), average(D), below average(E), poor(F), extremely poor(G) and poor(H) might be replaced with more descriptive ones (G). All of these categories contribute to the creation of a subjective reference for operational values.

## Ops- Meaning

First and foremost, the abbreviation ‘Ops’ refers to On-Base percentage plus slugging performance. The Ops statistic is derived from the sabermetric movement, which began several decades ago and is still in use today. It is used to capture the value of a batter using a straightforward heuristic.

## Calculations

In the first place, the term ‘Ops’ refers to On-Base percentage plus slugging percentage. This statistic derives from the sabermetric movement, which took place several decades ago and is known as the Operations statistic. This heuristic is used to capture the value of batters by using a simple heuristic to capture their worth.

## History

We’ll start with the history of OBP and then go on to SLP because these two components are what make up the Ops. When Branch Rickey was establishing the Brooklyn Dodgers into a National League juggernaut in the 1940s or 1950s, he established the Organization of Baseball Prospects (OBP). The second factor is referred to as the slugging percentage (SLG). We’ll get back to you on this later. SLG has been in use since the 1800s, according to prominent major league baseball historian John Thorn, who claims that it was first used as an official MLB statistic in 1923 before becoming an official MLB statistic in 1923.

The concept of combining two separate averages in order to obtain a more accurate measure was both reasonable and excessive.

## Why Should I Use Ops Stats?

The on-base percentage plus the slugging percentage is a standard measure that is simple to understand and use. Because it calculates based on the two most crucial jobs of a batter, which are getting on base and having the ability to hit the ball, Ops is considered to be beneficial. While Ops is a fantastic tool, it is lacking in several areas, such as league-wide offense, which changes on a regular basis. As an example, David Ortiz had the greatest Ops of the season last year with 1.021, which was the best in the league.

Another area in which Ops fails is that it does not take into consideration park variables.

It fails to recognize that when a player plays on his home field, he is more likely to perform well and enhance his stats.

## According To Ops Record, Which Pitcher Has The Fastest Throw Of All Time?

Put in mind that a quick fastball is a lot faster than it uses to be. Aroldis Chapman holds the record for throwing the quickest fastball ever recorded in big league baseball history. On September 24, 2010, he set a new world speed record with a throw that reached 105.1 miles per hour. 105.8 miles per hour is the speed at which this pitch was recorded.

Chapman’s pitch has grown by about a mile per hour throughout the course of his career. A pitch that was previously recorded at 105MPH may now be observed at 106MPH, according to the data. The explanation for this is because the pitch was measured in the wrong place.

## What Is The Downside Of Ops?

The only reason why some individuals believe that the Ops should not be employed is because to mathematical considerations. Despite the fact that we have said several times in this text that Ops is a statistic, we have not highlighted that it is not mathematically sound in any way. We’ve previously indicated that a ballplayer’s on-base percentage and slugging percentage are combined to make his overall offensive performance (Ops). Yes, we both believe that these two numbers are ideal for determining a player’s overall ability to play the game.

## Who Invented The Ops system?

Pete Palmer, please! The guy responsible for developing the Ops system took the time to explain how he came to develop a decent system and why it is still effective after so many years. He shared with us some of the positive steps he had taken, and he also stated that it would take several years to achieve perfection with this technique. The Ops strategy is clearly geared toward evaluating players on the offensive side of the field. All he did was try to make a connection between hitting and the team’s success in 1960.

## What Does The Ops System Require To Be Perfect?

When the Cubs games are shown on the Marquee Sports Network, the beginning line-ups are featured with the statistic ‘Ops’ next to every name, indicating that the player was injured. For example, the Ops statistic is useful since it informs us far more than most other statistics, like as the batting average number, do. The problem with the Ops data is that they lack context, which is important for fans to understand. More context is required for the Ops statistics to be ideal.

## Conclusion

Basically, we all know what it is: the Ops system is used to track the statistics of baseball players, and we all know how it works. With this approach, a player’s overall performance is expressed as a % of his or her total.

## On-base plus slugging

On-base plus slugging (sometimes known as on-base percentage and slugging percentage) is a baseball statistic that is computed as the sum of a player’s on-base percentage and slugging percentage. This method is excellent for determining a player’s offensive worth since it considers both the ability to get on base and the ability to hit for power, which are two crucial hitting talents, and it is simple to use. In Major League Baseball, a player with an OPS of.900 or more is considered to be in the highest tier of offensive skill.

## Formula

The fundamental formula iswhere OBP is on-base percentage, and SLG is slugging percentage. These percentages are defined as follows and in which locations:

- The letters H, BB, and HBP stand for hits, bases on balls, and times hit by pitch respectively. The letters AB stand for at bats, SF stands for sacrifice fly, and TB stands for total bases.

Because the denominators of OBP and SLG are different, it is feasible to rewrite the calculation for OPS using a common denominator in order to simplify the expression. Mathematics says that this statement is the same as the simple sum of OBP and SLG, which is as follows:

## Interpretation of OPS

It should be emphasized that, in contrast to many other statistics, a player’s OPS does not have a straightforward intrinsic meaning, despite the fact that it is valuable as a comparing measure. One flaw with OPS is that it gives equal weight to both on-base average and slugging percentage, despite the fact that on-base average is more closely associated with run production. This flaw is exacerbated by the fact that the component portions of OPS are not normally close to equal in terms of numerical value (league-average slugging percentages are usually 75-100 points higher than league-average on-base percentages, while league-leading slugging percentages are often 200-300 points higher than league-leading on-base percentages).

However, the formula’s simplicity, as well as its great connection to attacking skill, have made it famous among football enthusiasts. Inconsistencies between published OPSes and the sum of on-base average and slugging percentage are due to rounding mistakes in the calculations.

## History

The Hidden Game of Baseball, written by John Thorn and Pete Palmer in 1984, was the first book to make the concept of on-base plus slugging prominent. The New York Times then began publishing the names of the top performers in this statistic in its weekly “By the Numbers” box, a feature that ran for four years and garnered widespread attention. The statistics were popularized by baseball journalist Peter Gammons, who utilized them and spread the word about them to other writers and announcers.

## Leaders

The Major League Baseballplayers with a lifetime on-base percentage greater than 1.000 are as follows (through 2005, current players are shown in bold):

- Babe Ruth has a 1.1636 rating
- Ted Williams has a 1.1155 rating
- Lou Gehrig has a 1.0798 rating
- Barry Bonds has a 1.0533 rating
- Albert Pujols has a 1.0490 rating
- Todd Helton has a 1.0404 rating
- Hank Greenberg has a 1.0169 rating
- Rogers Hornsby has a 1.0103 rating
- Manny Ramirez has a 1.0076 rating
- Babe Ruth has a 1.16

Albert Pujols has the best career on-base percentage (OPS) of any right-handed batter in baseball history. The following are the best 10 single-season performances in Major League Baseball (all by left-handed hitters):

- 1.4217 for Barry Bonds in 2004
- 1.3807 for Barry Bonds in 2002
- 1.3791 for Babe Ruth in 1920
- 1.3785 for Barry Bonds in 2001
- Babe Ruth in 1921
- Babe Ruth in 1923
- 1.2874 for Ted Williams in 1941
- 1.2778 for Barry Bonds in 2003
- Babe Ruth in 1927
- Ted Williams in 1957
- 1.2582 for Babe Ruth in 1927
- 1.2566 for Ted

Rogers Hornsby set the record for the greatest single-season batting average for a right-handed batter in 1925 with a 1.2449 mark (13th on the all-time list). Since 1925, Mark McGwire has had the greatest single-season OPS for a right-hander, with a 1.2224 mark in 1998.

## Adjusted OPS (OPS+)

OPS+, or Adjusted OPS, is a metric that is closely connected to OPS. OPS+ is an adjusted OPS that takes into account the park and league in which the player played, but does not take into account fielding position. The league average is defined as having an OPS+ of 100 points. An OPS+ of 150 or greater is considered exceptional, indicating that the player’s overall OPS was 50 percent better than the national average after adjusting for park.

### Leaders in OPS+

According to lifetime leaders in OPS+ (minimum 3000 plate appearances, current players in bold), the following players were the best through 2005:

- Babe Ruth has 207 hits
- Ted Williams has 190
- Barry Bonds has 184
- Lou Gehrig has 179
- Rogers Hornsby has 175
- Mickey Mantle has 172
- Dan Brouthers has 170
- Joe Jackson has 170
- Ty Cobb has 167
- And the list goes on.

The following were the best single-season performances:

- Barry Bonds has 275 hits in 2002
- Barry Bonds has 262 hits in 2001
- Barry Bonds has 260 hits in 2004
- Babe Ruth has 256 hits in 1920
- Fred Dunlap has 250 hits in 1884
- Babe Ruth has 239 hits in 1921
- Babe Ruth has 239 hits in 1923
- Ted Williams has 235 hits in 1941
- Ted Williams has 233 hits in 1957
- Ross Barnes has 231 hits in 1876
- Barry Bonds has 231 hits in 2003
- Barry Bonds

## See also

- A proportion of the starting lineup
- % of slugging
- Sabermetrics

## Notes

- John Thorn and Pete Palmer are co-authors of this work (1984). Baseball’s “Secret Game” is a little known fact. ISBN 0-385-18283-X
- Alan Schwarz, Doubleday & Company, ISBN 0-385-18283-X (2004). The Game of Numbers. Thomas Dunne Books (ISBN 0-312-32222-4)
- Thomas Dunne Books (ISBN 0-312-32222-4)

## What does OPS stand for?

When it comes to baseball statistics, the ability to get on base and hit for power is referred to as the ability to get on base. Simply combining a player’s OBP and SLG results in the calculation of this statistic. The player’s overall offensive rating (OPR) is represented by the number you get. An OPS of.9000 or greater is excellent, and it is often held by the league’s top scorer. Barry Bonds, with a 1.4217 OPS in 2004, has the greatest single-season OPS mark in baseball history. Babe Ruth holds the record for the best all-time OPS with a 1.1636.

### Example

“The fact that no one on our squad has an OPS of.7000 or above is beyond comprehension to me. Yeah, we’re a bunch of jerks.”

### Related Slang

OBP | On-base Percentage |

avg | Batting average |

ERA | Earned run average |

RBI | Runs batted in |

HR | Home run |

Cycle | Single, double, triple, and home run |

MLB | Major League Baseball |

AB | At bat |

### Usage

The most recent update was made on October 22, 2014.

#### OPS definition

This article provides an explanation of what the abbreviation “OPS” stands for. The Slangit team has authored and collated the definition, example, and related words given above.

If you have any questions, please contact us. We are regularly adding new slang phrases, acronyms, and abbreviations to our database to keep it up to date. Please let us know if you have any suggestions for new terms or updates to current ones.

## What Is on-Base plus Slugging (OPS)? (with pictures)

What the abbreviation “OPS” stands for is explained on this page. Those who have contributed to the definition, example, and related words listed above have done so via the efforts of the Slangit community. The addition of new slang phrases, acronyms, and abbreviations to our database is a continuous process. Please let us know if you have any suggestions for new terms or changes to current ones.

## Components of On-base plus Slugging (OPS)

A player’s ability to reach base safely is measured by his or her on-base percentage (OBP), which is the first component of on-base percentage. The on-base percentage of a player is calculated by dividing the number of hits (H), walks (BB), and times hit by a pitch (HBP) by the amount of official at-bats (AB), walks, sacrifice flies (SF), and times hit by a pitch. In this case, the formula is as follows: OBP = (H + BB + HBP) / (AB + BB + SF + HBP) OBP = (H + BB + HBP) The other component of OPS is slugging percentage (SLG), which evaluates a player’s ability to get hits, particularly extra-base hits, in a given amount of innings (ie.

When it comes to baseball, on-base plus slugging (OPS) is a metric used to evaluate offensive performance.

A single (1B) is equal to one base, a double (2B) is equal to two bases, a triple (3B) is equal to three bases, and a home run (HR) is equal to four bases in baseball.

A different approach to write the slugging percentage formula is to do it as follows: SLG = (1B + (2x 2B) + (3x 3B) + (4x HR) / AB = (1B + (2x 2B) + (3x 3B) + (4x HR)

## Calculating OPS

When a player gets on base and hits a home run, he or she is said to have reached the on-base plus slugging percentage. The formula can be expressed in the simplest form possible: OPS is equal to the sum of OBP and SLGA. OPS = AB(H + BB + HBP) + TB(AB + BB + SF + HBP) / AB(AB + BB + SF + HBP) is a lengthier version of the OPS formula that includes all of the components:OPS = AB(H + BB + HBP) + TB(AB + BB + SF + HBP)

DidYou Know?Among active players, the career OPS leader is Mike Trout of the Los Angeles Angels, who has an OPS of.9999 as of June 2020. |
---|

## OPS vs. Batting Average

The on-base percentage (OBP) and slugging percentage (SLG) of a player are combined to form the OPS (SLG). Many people believe that OPS is a valuable tool for evaluating a batter’s abilities. Acquiring a base hit without recording an out has a strong correlation with contributing to a team’s run production. On-base percentage, which is determined by dividing the number of hits by the number of at-bats, is regarded a more accurate indicator of a batter’s contributions to the team than batting average, which is derived by dividing the number of hits by the number of at-bats.

Major League Baseball’s average on-base percentage (OPS) is approximately.750, however this varies from season to season.

Because a double is normally more beneficial to a team than a single, the OPS formula accounts for this in its calculations. Home runs are the most valuable sort of hit, and the OPS formula rewards them with the most points since they are the most valuable.

## OPS in Major League Baseball

When it comes to Major League Baseball, the average OPS is approximately.750, however this varies from season to season and can be particularly depending on the strength of MLB pitchers in a given year, according to Baseball Reference. An on-base percentage of 1.000 is regarded exceptional for a major league player. In most seasons, only a few players who have batted more than 500 times are able to reach an OPS of one thousand. As of 2020, just seven players in the history of Major League Baseball have retired with an OPS of 1.000 or higher.

#### MLB players who retired with a career OPS of 1.000 or better:

- Baseball legends Babe Ruth (1.1636), Ted Williams (1.1155), Lou Gehrig (1.0798), Barry Bonds (1.0512), Jimmie Foxx (1.0376), Hank Greenberg (1.0169), and Rogers Hornsby (1.0103) are among those who have received the highest ratings.

## OPS Outside of the Major Leagues

Lower levels of baseball, such as high school or youth leagues, are sometimes characterized by highly competent players who are able to reach significantly higher averages in different batting statistics, including on-base percentage (OPS). This is due to the fact that the ability levels of batters and pitchers at this level are far more diverse than they are in the big leagues. When a great high school hitter goes up against lesser-skilled pitchers on a regular basis, he is in stark contrast to when a great major league hitter goes up against really gifted pitchers.

## Criticisms of OPS

Despite the fact that many people regard OPS to be a valuable tool, detractors have brought out a number of possible problems with this metric in particular. Specifically, they are concerned with the value of a hitter’s varied outcomes to the team and how well specific statistics connect to the performance of a team. For example, on-base percentage (OBP) is more closely associated with team performance than slugging percentage (SLG), yet the OPS algorithm assigns equal weight to the two numbers.

A double is worth twice as much as a single, a triple is worth three times as much as a single, and so on.

It has been discovered that a double is only worth 40 percent to 60 percent more to the team than a single depending on the technique used to measure the value of each type of hit.

As a result, some critics believe that slugging percentage, and hence on-base percentage (OPS), overvalues extra-base hits.

She is particularly enthusiastic about reading and writing, while she has a wide range of interests that include medicine, art, movies, history, politics, ethics, and religion, among others. Tricia presently resides in Northern California, where she is hard at work on her debut novel.

Tricia Christensen is an American actress and singer. Tricia holds a bachelor’s degree in English literature from Sonoma State University and has been a regular contributor to wiseGEEK for many years. She is particularly enthusiastic about reading and writing, while she has a wide range of interests that include medicine, art, movies, history, politics, ethics, and religion, among others. Tricia presently resides in Northern California, where she is hard at work on her debut novel.

## You might also Like

26 Hollywood A-Listers Who Are Extremely Wealthy Are you able to guess which team these athletes represented? Any American should be able to pass this quiz on US history. Do you recognize any of the celebrities that wore these iconic ensembles? Predicting the weather with the most beautiful women in the world Amazing Optical Illusions that will fool your eyes and trick your brain You Don’t Want to Miss These 40 Wedding Photographic Faux Pas 17 Intriguing Maps That Will Change Your Perspective on the World

## What Does OPS Mean in Baseball?

(See the rest of our baseball glossary for more information.)

## Q: What Does OPS Mean in Baseball?

In baseball, OPS is an abbreviation for On-Base Percentage Plus Slugging Percentage. It is a statistic that was developed as a result of the Sabermetrics movement during the previous couple of decades, and it seeks to represent the worth of a batter using a single basic heuristic. Because of the name and its extension, it is reasonable to assume that OPS is calculated by multiplying two more numbers: A team’s OPS is calculated as follows: OBP + Slugging Percentage (SLG) These component statistics are then computed in the following ways.

Developed by Brooklyn Dodgers executive Branch Rickey in the 1940s or 1950s, Slugging Percentage (SLG) =/ABOBP became an official statistic of Major League Baseball in 1923 after being approved by the league’s rules committee.

) For a more in-depth discussion of this topic, please see theBig Data Baseball section below.

It took more than 50 years for the different components of OPS to make their way onto baseball cards, beginning with a complete listing of doubles, three-base hits (triples), and home runs on card1 (Jackie Robinson) of the 1953 Topps set.

With a 1.4217 OPS in 2004, Barry Bonds owns the single-season record for the best OPS in baseball history.

(See the rest of our baseball glossary for more information.) (This is an affiliate link)