## What is WHIP in Baseball – What is the Calculation?

If you have all of this knowledge, you should be able to answer any questions you might have regarding saves in baseball. We also hope that you have gained some insight into the history of the Major League Baseball franchise through this website. As a result, please leave a remark below and we will respond as soon as possible. Understanding the concept of a save in Major League Baseball is essential. Key Takeaways When a game is close, you must know when to applaud and when to sit back. What makes a pitcher get the elusive save is revealed in this article.

This video instructs newcomers on an essential statistic that appears on the career records of many major league relief relievers.

On, it was revised.

## What Does WHIP Mean in Baseball?

The abbreviation “WHIP” refers to the number of walks and hits that a baseball pitcher allows to be recorded per inning thrown. The algorithm is used to determine how many baserunners a pitcher allows every inning of play. WHIP is viewed as a leading signal by teams and fantasy baseball owners that the pitcher is accomplishing their job of keeping baserunners off the base paths, according to the WHIP formula. Finally, intentional walks do count against a pitcher’s WHIP, which might cause this statistic to be significantly skewed if the decision to walk a batter comes from the manager.

A ground out, a fly out, or a strike out of the opposing hitter are all examples of outs in baseball.

## What Does WHIP Not Measure?

One criticism leveled with WHIP is that the formula does not take into account how the baserunner reached base. To give you an example, under this computation, a hitter who walks has the same effect on the game as a batter who knocks two doubles. The WHIP, on the other hand, does not take into account a hit batter, an error, or a runner reaching on a fielder’s choice.

## How to Calculate a Pitcher’s WHIP?

WHIP is calculated as follows: (Walks + Hits) / Total Innings Pitched Imagine if Pitcher A finished the season with 60 walks, 275 hits, and 210 innings of work under his belt. WHIP is calculated by a pitcher in order to better comprehend their pitching statistics for the season, as well as their ERA. (60 walks + 275 hits) = 335335 Walks Plus Hits / 210 = 335335 Walks Plus Hits WHIP = 1.59 divided by the number of innings pitched

## What is a Good WHIP in Baseball?

The foundation for an outstanding WHIP in baseball must be understood by viewers, just as it is with any other statistic. Here is a simple analysis of the brackets in order to evaluate how much a strong pitcher is worth in this statistic.

- The foundation for an outstanding WHIP in baseball must be understood by viewers, just like any other statistic. For the sake of determining how much a good pitcher is worth in this statistic, the brackets have been quickly broken down.

The baseline for an outstanding WHIP in baseball must be understood by viewers, just as it is for any other statistic.

Here is a simple summary of the brackets to calculate how much a good pitcher is worth in this statistic.

## Best WHIP Pitchers of All-Time

While the league average for walks and hits per inning pitched is about 1.30 in 2019, according to Baseball-Reference, there have been some exceptional pitchers in the history of the game who have had fantastic WHIPs. Seven of the ten best WHIP pitchers mentioned below, as of April 8, 2021, are members of the National Baseball Hall of Fame, and several of these pitchers were Cy Young Award winners as well. There are presently no Hall of Famers among the players who are not actively active baseball players (Clayton Kershaw, Chris Sale, and Jacob deGram), hence they are ineligible for consideration at this time.

- Addie Joss (.96), Ed Walks (.99), Mariano Rivera (1), Clayton Kershaw (1), Chris Sale (1.03), John Montgomery Ward (1.04), Jacob deGrom (1.04), Pedro Martinez (1.05), Christy Mathewson (1.05), Trevor Hoffman (1.05)
- Addie Joss (.96)
- Ed Walks (.99)
- Mariano Rivera (1)
- Clayton Kershaw (1)

## How is WHIP Different from ERA?

The WHIP metric varies from the ERA in that it measures two separate aspects of a pitcher’s ability to pitch. It is calculated by taking into account how many earned runs a pitcher gives up in the overall number of innings pitched. Earned runs may be anything from a single that brings in a runner to a home run that brings in the winning run. Regardless, an earned run average (ERA) primarily indicates the number of times a baserunner is allowed to reach home plate. The ERA will not be affected by an unearned run, but the WHIP will be affected if the pitcher allows more baserunners to reach first base.

A pitcher who gets himself into jams every inning by giving up hits and walks will eventually give up the game and allow runs to score.

Having baserunners on every inning, on the other hand, increases the likelihood of allowing runs, which is why the WHIP is a great benchmark to consider when considering whether or not to sign a pitcher for your club.

## Who Came up with the WHIP Stat in Baseball?

Daniel Okrent is credited as being the founding father of WHIP in 1979. Daniel was a member of a fantasy baseball club that was seeking for ways to evaluate the effectiveness of a pitcher. In the beginning, Daniel Okrent came up with the moniker “Innings Pitched Ratio,” which was eventually abbreviated to WHIP.

## Conclusion on WHIP

Baseball statistics are an aesthetically pleasing aspect of the game. Scouts, managers, general managers, and fantasy baseball owners construct their teams based on the statistics that are most important to their squad. Although the WHIP is only a little factor to consider when analyzing a pitcher’s potential, it is still an important statistic to know. Finally, WHIP can help you uncover that underappreciated pitcher who may be overlooked by other teams owing to his or her name recognition, but who may have a good influence on your club.

## Similar Posts

What is the Infield Fly Rule, and how does it work? Baseball’s general manager What is a Squeeze Play in Baseball, and how does it work? Baseball between the AA and AAA levels What is a Knuckleball and how does it work? Baseball Is Postponed Due to Rain What is the definition of a hold in baseball? Baseball’s “Magic Number” is the DFA. What is an Eephus Pitch, and how does it work? What Do Bat Boys Get Paid? How Much Money Do Bat Boys Make? What is the Rule 5 Draft, and why is it important? Pitch for Spitball In baseball, what exactly is a quality start?

Baseball with a Can of Corn In baseball, what exactly is the strike zone? What Is the Bush League in Baseball, and What Does It Mean? How to Become a Major League Baseball Umpire What is the definition of a baseball ace? What is a Walk-Off Home Run, and how does it happen?

## What Is WHIP in Baseball? A Complete Guide to the Statistic

When you’re watching a baseball game on television and a new pitcher enters the game, you’ll see the statistic “WHIP” appear on the screen. Whip? What does a whip have to do with baseball, you might wonder. It’s not that sort of whip, though; it’s an abbreviation for something else. So, what is a WHIP in the world of baseball? Walking and hitting rate (WHIP) is an acronym that stands for “walks and hits per innings pitched.” It is a measure of the average number of walks and hits that a pitcher allows per inning pitched.

The win-loss index (WHIP) is a statistic that is well-known, although it is often overlooked in favor of more standard statistics.

First and foremost, the question at hand:

## What Is a Pitcher’s WHIP?

It goes without saying that a pitcher’s primary objective is to prevent the other side from scoring runs. Naturally, in order for the other side to score runs, they will need batters to reach base, therefore avoiding baserunners will typically result in fewer runs being allowed in general. Pitchers’ walks and hits per inning pitched (WHIP) is a ratioed statistic (also known as a rate stat) that measures the average number of baserunners that a pitcher allows per inning via the two primary ways that hitters reach base: hits and walks.

Because it does not account for hitters who are hit by pitches, the WHIP statistic does not accurately reflect the number of baserunners a pitcher permits each inning (assuming a pitcher has hit at least one batter throughout a season).

In addition to hits and walks, there is a statistic known as Baserunners Per Nine Innings (MB/9), which takes into account hit-by-pitches as well as other factors.

However, because MB/9 is used so infrequently, it remains a mostly obscure and redundant metric, with WHIP taking the lead in terms of importance instead.

## How Do You Calculate WHIP in Baseball?

tuckerjones2 courtesy of Canva.com When compared to other of the more recent statistics in baseball, the WHIP is one of the most plain and uncomplicated to compute, requiring no complicated formulae or difficult-to-find information. All things considered, even the name of the formula is virtually correct: the number of walks and hits per inning pitched. WHIP is calculated by adding together the number of hits and walks that a pitcher has allowed for the whole season and dividing that amount by the total number of innings thrown.

It is written as (Hits + Walks)/Innings Pitched in the equation, which is, once again, a very basic one.

You would put 85 and 30 together (to get 115) and divide by 100 to obtain 1.15, which is the pitcher’s win-loss-interval-pitch-per-inning (WHIP).

Additionally, all of the components required for computing WHIP are widely available on the backs of baseball cards, nearly every statistics website, and even by just scanning box scores, which makes calculating the statistic much easier.

## What Is a Good WHIP in Baseball?

If you’ve read any of our prior articles on various rate statistics, like as the earned run average (ERA), slugging percentage, and on-base plus slugging (OPS), you’re probably aware that these sorts of figures may fluctuate depending on whether or not there is more or less offense in a game. WHIP has a lower volatility than other rate statistics, which means that the standards for what constitutes a good and bad WHIP are less unpredictable from year to year. Typically, an average WHIP is approximately 1.30, a good WHIP is less than 1.10, and an outstanding WHIP is less than 1.

A good WHIP is frequently associated with a good ERA, however the two are not always the same for every pitcher in the league.

In both 2018 and 2017, seven pitchers were ranked in the top ten of the top-10 rankings for their respective seasons.

While five pitchers finished in the bottom-10 of both lists in 2018, seven pitchers achieved this improbable feat during the previous season.

## Is WHIP a Good Indicator of a Pitcher’s Success?

As previously stated, the earned run average (ERA) and the earned run average (WHIP) are frequently associated with one another. Naturally, because a strong ERA is typically the best indicator of whether or not a pitcher will be successful, a good WHIP may sometimes be indicative of a successful pitcher as well as a successful pitcher. Because hard-hit balls that result from faulty pitches are more likely to be hit, and because walks are the pitcher’s responsibility, the WHIP may be used to reflect success in the pitcher’s role.

- Having said that, the WHIP does not treat all pitchers equally.
- A pitcher who walks three batters in an inning has the same WHIP as a pitcher who gives up three hits in an inning, but odds are good that you’ll score at least one run when you get three hits in an inning, and if one of those hits clears the fence, you’ll be looking at a three-run inning.
- While walking an average of 170 batters each season throughout that span, the team led the league in six of those seven years.
- Similarly, a pitcher who has a low WHIP but allows a significant number of home runs might incur negative consequences as a result of this.
- But Verlander’s earned run average (ERA) that season was 2.58, which is still great but is the highest on that list by one-third of a run above the next closest pitcher.
- As a consequence, he only allowed 20 percent of the baserunners he allowed in 2019, yet that 20 percent contributed for nearly 70 percent of his earned runs.

In terms of the individual pitchers, it might be difficult to make exact predictions because each pitcher has his or her own distinct style of pitching and method of getting outs. On the other hand, when you look at the team side with numerous pitchers participating, it’s a very other situation.

## Does WHIP Correlate to Wins?

Throughout the course of a baseball season, one of the most difficult problems in putting together a team is identifying a collection of players whose diverse skill sets complement one another and who are capable of filling each position on the squad. History, on the other hand, has consistently demonstrated that pitching makes the difference more often than not. According to data from the Lahman Baseball Database, there is a link between having a great WHIP and having a winning team. This is particularly evident in the statistics, which demonstrates a link that is somewhat stronger than the association between ERA and winning %.

According to the statistics, just nine of the 116 World Series champions have had a WHIP that is in the lower half of the league’s average across their career.

## When Was WHIP Invented in Baseball?

courtesy of peych p on Canva.com For as straightforward as the notion of WHIP appears to be, the statistic has a very clear-cut and very recent history. It also gained widespread acceptance and widespread usage rather rapidly. Daniel Okrent, a writer who also established rotisserie fantasy baseball in 1979, is credited with inventing the WHIP. The statistic was originally known as the Innings Pitched Ratio, or IPRAT, but it has now been shortened to the phrase Wins Above Replacement (WHIP). It was Okrent’s intention to incorporate a rotisserie element into the scoring and prediction of future results in the first rotisserie fantasy baseball league, which he created with nine other friends the following year.

Regardless of how long the statistic has been there, you’ll suddenly be able to tell if a pitcher is on his way to greatness or if he’s having a bad year if you see WHIP displayed someplace.

## Odds and Ends About WHIP

- Pedro Martinez of the Hall of Fame established the record for the greatest single-season WHIP in 2000 with a 0.737 mark. Martinez had a 1.74 earned run average across 217.0 innings thrown, allowing just 128 hits and 32 walks while compiling a 1.28 ERA. It was the 1908 Chicago White Sox that had the best team WHIP in the modern era, with 1.0248, just edging out the 1904 Boston Americans (Red Sox) by.0001 point. Several of those innings were turned in by future Hall of Famer Ed Walsh, who finished the season with a 0.860 WHIP (17th best all-time) over a 20th-century-record 464.0 innings thrown. It has been reported that the worst team WHIP since 1901 belongs to the 1930 Philadelphia Phillies, who achieved a 1.848 mark, outperforming the St. Louis Browns of 1939, 1937, and 1936 (in that order), who hold the next three positions on the list
- The 1930 Philadelphia Phillies also hold the record for the worst WHIP by a qualified pitcher, with Les Sweetland posting a 1.982 mark in 167.0 innings of work. Not to be outdone, he also had a 7.71 earned run average, which was a record low.

### Related Articles

- What Is the Definition of ERA in Baseball? A Complete Guide to Statistics
- A Complete Guide to Probability
- What is the definition of a bullpen in baseball? What is the definition of a quality start in baseball? A metric that measures.
- What Is the Definition of a Shutout in Baseball? The significance of the phrase as well as historical data
- What Is the Meaning of MVR in Baseball? A Comprehensive Guide to the Rule

## What Is WHIP In Baseball? [Pitching Statistic Definition]

In baseball, what does a WHIP stand for? WHIP (Walks and Hits Per Inning Pitched) is an acronym used in Major League Baseball games to represent “Walks and Hits Per Inning Pitched.” It is a statistic that quantifies the number of runners who reach base against a pitcher in each inning of a nine-inning baseball game. A low WHIP implies that the pitcher has induced weak contact rather than hard-hit balls, whereas a high WHIP suggests that the pitcher has given up more hits or walks than is expected for the pitcher’s role.

## What Does WHIP Mean in Baseball?

Was the term “whip” used in baseball to indicate anything specific? WHIP is an acronym for “Walks and Hits Per Inning Pitched,” which is used in Major League Baseball games. The number of runners who reach base against a pitcher in each of the nine innings is measured by this statistic.

A low WHIP implies that the pitcher has induced weak contact rather than hard-hit balls, whereas a high WHIP suggests that the pitcher has given up more hits or walks than is customary for the pitcher’s situation.

## Is WHIP a Telltale Sign of a Good Pitcher?

What does a high WHIP tell you about a pitcher’s ability to command the strike zone? Unfortunately, this indicates that they are either walking or hitting batters far too frequently. If you have a pitcher that has terrible control of the ball, you should expect a high WHIP from him. What about pitchers who have low numbers in this metric, on the other hand? The key to understanding what a low WHIP signifies is contained within the word itself. A pitcher who allows less than one hit or walk per inning thrown will be more difficult to score against, and his or her opponents should have greater success keeping their own players off the basepaths.

## How is WHIP Calculated in Baseball?

Calculating WHIP may be done in two different ways. The first method is straightforward: add up the number of hits and walks the pitcher has surrendered, then divide the total by the number of hits and walks. Suppose a pitcher allowed 40 hits over 50 innings pitched (or 0.80 hits per inning pitched), resulting in an average of 0.80 hits allowed per inning pitched. After 50 innings, that same pitcher would have allowed 15 walks, thus he could also compute his WHIP by multiplying the number of walks (15) by the number of innings pitched to obtain an average of 0.25 walks allowed per inning.

The number of total runners a pitcher has permitted, the number of those who were stranded on base (or left on base), and the number of innings the pitcher has pitched are all necessary to determine the outcome.

Suppose a pitcher’s opponent reached base three times in four innings thrown.

To determine how many of those runners were left on base or stranded after an out was recorded against them during the same inning, multiply the total number of runners who reached base by the number of runners who were left on base after an out was recorded against them during that inning (for example, if two of three runners got stranded in four innings pitched, you would have a 0.67).

“Wisecrack Edition” > “Wisecrack Edition” Add together the number of batters who reached base safely, the number of batters who reached base but were eventually left on after an out was recorded during the same innings, and the number of batters who played to determine how many baserunners the pitcher allowed per inning after everything is said and done.

That would result in five total runners reaching base safely (three hits plus two walks).

As a result, you would add the numbers five and two together to produce a total of seven base runners.

((Total Bases Allowed / Innings Pitched) + (Walks Allowed / Innings Pitched))= WHIP Consider the following scenario: He pitches five innings and allows eight hits, which equals the number of total bases allowed each inning (0.80).

What would have happened in this scenario if the same pitcher had two strikeouts and three runs scored against him? How many walks would he have given up on average each appearance? Three times five equals three (or 0.60)

## What is a Good Baseball WHIP?

The vast majority of baseball analysts feel that a WHIP of one or less is really good. Lower WHIPs are preferable, although it is up to the league to determine what is desirable. For example, in Major League Baseball, WHIPs are often 1.30 or lower. While it might be higher in the lower levels of baseball, it is not guaranteed.

Rating | WHIP |

Outstanding | 0.80 – 1.00 |

Very Good to Average | 1.00 – 1.30 |

Average to Bad | 1.30 – 1.50+ |

## Career WHIP Leaders

In 2019, according to Baseball-Reference.com, the league average for walks and hits per inning pitched is about 1.30. However, there have been certain pitchers who have had great WHIPs throughout their whole careers. The following are the top 10 career leaders in the history of WHIP:

Rank | Player | WHIP |

1. | Addie Joss | 0.9678 |

2. | Ed Walsh | 0.9996 |

3. | Mariano Rivera | 1.0003 |

4. | Clayton Kershaw | 1.0023 |

5. | Jacob deGrom | 1.0114 |

6. | Chris Sale | 1.0357 |

7. | John Ward | 1.0438 |

8. | Pedro Martínez | 1.0544 |

9. | Christy Mathewson | 1.0581 |

10. | Trevor Hoffman | 1.0584 |

## What’s the Origin of WHIP in Baseball?

According to popular belief, Daniel Okrent, who devised the statistic in 1979 while playing in a Fantasy Baseball League, took an acronym for “walks and hits per innings pitched” (or potentially innings pitched) and turned it to a number.

## Statistics on WHIP

- When Hilton Smith pitched for the Kansas City Monarchs (a NASL team) in 1944, he had a WHIP of 0.6176, which is the highest single-season WHIP ever recorded. Phil Niekro, who pitched over 5,400 innings in the Majors, has the worst career WHIP with a mark of 1.268. The worst season WHIP in baseball history is 2.028, recorded by John McMullin in 1871, when he threw 249 innings and allowed 153 earned runs and 430 hits, leading the league in both categories that year.

## What does WHIP not measure?

There is no correlation between WHIP and a hit batter, a fielding mistake, or a runner who is in line with a fielder’s judgment. The WHIP does not provide any information about the manner in which a baserunner touched the ground. The data does not include any information on how a hitter who walks twice has an influence on the WHIP calculation as well.

## How is WHIP different from ERA?

The pitcher’s earned run average (ERA) gauges what he or she can manage. When it comes to the WHIP, though, it takes into consideration what happens after a hitter makes contact with the ball. The earned run average (ERA) does not take into account walks or hit-by-pitches, and the earned run average (WHIP) does not factor in strikeouts.

## FAQs

In no way, shape, or form. Even though a pitcher’s WHIP is highly correlated to the number of hits and walks allowed, it is what a pitcher performs with runners on base that makes the difference between winning and losing.

### Does a low WHIP Lead to More Strikeouts?

No, having a high K/BB ratio is what leads to a higher number of strikeouts. Typically, pitchers with low WHIPs pitch in the American League, where batters hit for a higher average than players in the National League on a more regular basis (NL).

### Who Has the lowest WHIP in MLB?

Currently, Addie Joss holds the record for the lowest career WHIP in Major League Baseball with a 0.9678 mark during his nine seasons with the Cleveland Naps from 1902-2910. (now known as Cleaveland Indias).

### What is the League Average WHIP?

In 2019, the league’s average earned run average (WHIP) was 1.334, in 2018, the league’s average earned run average was 1.304, in 2017, the league’s average earned run average was 1.342, and in 2016, the league’s average earned run average was 1.325.

## Final Words

The pitcher’s earned run average (WHIP) is a statistic that indicates how many runners reach base during an inning. In baseball, it is an acronym that stands for walks plus hits per inning thrown, and it may be used to determine how efficient pitchers are in keeping runs from scoring. The Most Important Takeaways Learn what WHIP stands for in order to have a better knowledge of the game. Acquire a working knowledge of WHIPI measurements and calculations. ncrease your understanding of an essential statistic in baseball by reading this article.

Develop a better grasp of the game If you found this post to be useful, please forward it to your friends! As well as telling them about WHIP if they are baseball enthusiasts as well! This page was last updated on

## WHAT DOES WHIP MEAN IN BASEBALL?

dividing by the number of innings pitched **(hits + walks) divided by the number of innings pitched One of my favorite pitching statistics is the WHIP (walk-to-hit ratio). It is a measure of the number of walks and hits allowed per inning pitched. It demonstrates a pitcher’s efficacy against hitters as well as his ability to throw strikes to the batters. Here’s an illustration of what I mean: Junior has thrown a total of 156 innings this season. He has surrendered 113 hits as well as 33 base on balls.

In the last nine innings, Junior has a WHIP of.936, which indicates that he does not give up a single hit or walk for every inning pitched.

## What does WHIP stand for in baseball?

Alks andH it is in a state of perInningP itched

## How do you figure out a pitcher’s WHIP in baseball?

Pitch totals for the pitcher, including incomplete innings are included (with each out recorded counting as a third of an inning). In the calculation of hits and walks allowed by the pitcher, outcomes such as a hitter reaching on an error, fielder’s choice, sacrifice, or a hit by pitch are not included.

## Do you intentional walks count against a pitcher’s WHIP in baseball?

Yes. For the purposes of calculating a pitcher’s WHIP, intentionally walked batters are treated as if they were given up by the pitcher.

## Do hits by pitch (HBP) count against a pitcher’s WHIP in baseball?

In baseball statistics, errors do not count towards a pitcher’s WHIP (while he is on the mound).

## Do errors count against a pitcher’s WHIP in baseball?

When it comes to baseball statistics, errors do not count towards the pitcher’s WHIP.

## Does a fielder’s choice count against a pitcher’s WHIP in baseball?

When it comes to baseball statistics, errors do not count against the WHIP.

## Get Our Free DrillsSkills eBook!

Fill out the form below with your first name and email address to receive our free eBook, which is jam-packed with useful information and drills. Hitting Mechanics Videos Teaching Basic Pitching Mechanics Videos Teaching Hitting Mechanics Videos Teaching Basic Pitching Mechanics Videos Teaching Basic Pitching Mechanics Baseball Hitting Drills That Are Absolutely Required Fundamentals and Fundamentals of the Infield All of our articles (more than 200 total)

## What is Whip in Baseball?

The WHIP (walks plus hits divided by innings pitched) is an acronym that stands for walks plus hits divided by innings pitched. This effectively provides us with a statistic indicating how many baserunners a pitcher permits every inning. This is some REALLY GOOD STUFF when it comes to handicapping baseball games since it’s a far more revealing metric than the earned run average, which is saying a lot considering it’s a much more telling figure than the ERA. Let’s have a look at an example in the next section.

## WHIP is a Huge Factor When Handicapping Baseball

As an illustration, a pitcher has thrown 100 innings this season. During that time, he’s allowed 85 hits and 40 walks while pitching. We take the 40 walks and add them to the 85 hits to get the total of 115. This results in a total of 125 walks and hits for the team. A WHIP of 1.25 is obtained by dividing the total number of innings pitched by 100 innings pitched. In case you’re wondering, that’s a very standard figure. Here is a breakdown of the good, the average, and the bad on a scale of 1 to 10: A dollar amount or less than one dollar: It’s really horrible.

- This is an achievement that only a select few pitchers will attain.
- 1.01-1.20:Excellent performance.
- This style of pitcher does not allow many hitters to reach base and is more likely to be a successful Major League pitcher.
- 1.40-1.50:These are not very ideal numbers, and these pitchers are likely to have control issues or problems with their mechanics, and they will not be able to stay in the major leagues for an extended period of time.
- Given the option to gamble against a whip with odds greater than 1.50 (assuming the odds are reasonable), this is an excellent proposition.
- You won’t see many pitchers in Major League Baseball with WHIPs greater than 1.50.
- Always remember that when it comes to betting, you want to be certain that you acquire the finest possible number.

This effectively implies that you’re putting a lower price on favorites while being paid more on underdog bets! This fantastic money-saving opportunity can be found at BetAnySports! Football and basketball are now available at -105 odds!

## List of Major League Baseball career WHIP leaders – Wikipedia

Addie Joss holds the record for the most wins in a single season (WHIP). As a metric in baseball statistics, the walks plus hits per inning pitched (WHIP) statistic is an abbreviation for the amount of baserunners a pitcher has allowed per inning pitched in a game. The walk-hit rate (WHIP) of a pitcher determines how often hitters reach base; a lower walk-hit rate suggests greater performance. The WHIP is computed by summing the total number of walks and hits allowed and dividing this total by the total number of innings pitched in a given season.

Ed Walsh (0.9996) is the only other player in the league with a career WHIP lower than 1.0000 points.

## Contents

Rank | Rank amongst leaders in career WHIP.A blank field indicates a tie. |

Player | Name of player. |

WHIP | Total career WHIP. |

* | Denotes elected toNational Baseball Hall of Fame. |
---|---|

Bold | Denotes active player. |

## List

Clayton Kershaw is the active leader and ranks fourth all-time in lifetime WHIP with a 0.98 ERA.

Rank | Player | WHIP |
---|---|---|

1 | Addie Joss* | 0.9678 |

2 | Ed Walsh* | 0.9996 |

3 | Mariano Rivera* | 1.0003 |

4 | Clayton Kershaw | 1.0042 |

5 | Jacob deGrom | 1.0114 |

6 | Chris Sale | 1.0423 |

7 | John Montgomery Ward* | 1.0438 |

8 | Pedro Martínez* | 1.0544 |

9 | Christy Mathewson* | 1.0581 |

10 | Trevor Hoffman* | 1.0584 |

11 | Walter Johnson* | 1.0612 |

12 | Mordecai Brown* | 1.0658 |

13 | Charlie Sweeney | 1.0673 |

14 | Reb Russell | 1.0800 |

15 | Max Scherzer | 1.0837 |

16 | Jim Devlin | 1.0868 |

17 | Smoky Joe Wood | 1.0869 |

18 | Jack Pfiester | 1.0887 |

19 | George Bradley | 1.0901 |

20 | Tommy Bond | 1.0908 |

21 | Babe Adams | 1.0920 |

Satchel Paige* | 1.0920 | |

23 | Stephen Strasburg | 1.0926 |

24 | Corey Kluber | 1.1000 |

25 | Juan Marichal* | 1.1012 |

26 | Dick Hall | 1.1019 |

Rube Waddell* | 1.1019 | |

28 | Larry Corcoran | 1.1048 |

29 | Deacon Phillippe | 1.1051 |

30 | Sandy Koufax* | 1.1061 |

31 | Fred Glade | 1.1066 |

32 | Ed Morris | 1.1075 |

33 | Will White | 1.1110 |

34 | Gerrit Cole | 1.1115 |

35 | Chief Bender* | 1.1127 |

36 | Charlie Ferguson | 1.1171 |

37 | Terry Larkin | 1.1172 |

38 | Eddie Plank* | 1.1189 |

39 | Doc White | 1.1207 |

40 | Tom Seaver* | 1.1208 |

41 | Grover Cleveland Alexander* | 1.1212 |

42 | Madison Bumgarner | 1.1224 |

43 | Tim Keefe* | 1.1230 |

44 | Hoyt Wilhelm* | 1.1245 |

45 | Masahiro Tanaka | 1.1296 |

Cy Young* | 1.1296 | |

47 | Frank Owen | 1.1306 |

48 | George McQuillan | 1.1311 |

49 | Hooks Wiltse | 1.1315 |

50 | Noodles Hahn | 1.1319 |

Rank | Player | WHIP |
---|---|---|

51 | Johan Santana | 1.1320 |

52 | Jim McCormick | 1.1322 |

53 | Ray Collins | 1.1340 |

54 | Catfish Hunter* | 1.1341 |

55 | Justin Verlander | 1.1342 |

56 | Lady Baldwin | 1.1347 |

57 | Curt Schilling | 1.1374 |

58 | Bruce Sutter* | 1.1401 |

59 | Kyle Hendricks | 1.1406 |

Bret Saberhagen | 1.1406 | |

61 | Nick Altrock | 1.1407 |

62 | Sam Leever | 1.1411 |

63 | Ferguson Jenkins* | 1.1418 |

64 | Don Sutton* | 1.1425 |

65 | Greg Maddux* | 1.1431 |

Ed Reulbach | 1.1431 | |

67 | Andy Messersmith | 1.1433 |

68 | Sid Fernandez | 1.1443 |

69 | Jeff Tesreau | 1.1447 |

70 | Gary Nolan | 1.1453 |

71 | Joe Benz | 1.1466 |

Jim Whitney | 1.1466 | |

73 | Don Drysdale* | 1.1477 |

74 | Charles Radbourn* | 1.1492 |

75 | Barney Pelty | 1.1504 |

76 | Yu Darvish | 1.1513 |

77 | Jack Chesbro* | 1.1520 |

78 | Tiny Bonham | 1.1528 |

79 | Fred Goldsmith | 1.1530 |

80 | Russ Ford | 1.1537 |

81 | Eddie Cicotte | 1.1544 |

82 | Rollie Fingers* | 1.1556 |

83 | Bullet Rogan* | 1.1567 |

84 | Bob Caruthers | 1.1578 |

85 | Aaron Nola | 1.1580 |

86 | Dick Rudolph | 1.1581 |

87 | Babe Ruth* | 1.1586 |

88 | Harry Coveleski | 1.1587 |

89 | Zack Greinke | 1.1588 |

90 | Dennis Eckersley* | 1.1608 |

91 | David Price | 1.1624 |

92 | Orval Overall | 1.1613 |

93 | Denny McLain | 1.1633 |

94 | Jumbo McGinnis | 1.1636 |

95 | George Winter | 1.1649 |

96 | Frank Smith | 1.1658 |

97 | Carl Hubbell* | 1.1659 |

98 | Guy Hecker | 1.1676 |

99 | Jake Weimer | 1.1679 |

100 | Robin Roberts* | 1.1696 |

## Notes

- Inactive players include those who have declared their retirement or who have not participated in a complete season of competition

## References

- Retrieved on July 28, 2021 from Baseball Reference
- Semchuck, Alex. “Addie Joss Bio”. Retrieved on July 28, 2021 from Baseball Reference. For the study of American baseball, the Society for American Baseball Research was founded. “Addie Joss Hall of Fame Profile,” which was retrieved on July 28, 2021. The National Baseball Hall of Fame was established in 1996. “Ed Walsh Career Stats”.Baseball Reference. RetrievedJuly 28,2021
- “Ed Walsh Career Stats”.Baseball Reference. RetrievedAugust 1,2021

## External links

- “Career LeadersRecords for WalksHits per IP” is a list of career leaders’ records for walks and hits per IP. Baseball-Reference.com

Baseball statistics(types of records) | |

General |
---|

- Career records, single-game records, and single-season records are all available. Seasonal record-breakers are shown below. Records that are regarded unbreakable
- Leaders in their respective fields

- On-base percentage, slugging percentage, on-base plus slugging percentage, on-base plus slugging percentage, times on base, total bases, home runs, strikeouts, plate appearances, games played

- Hits in consecutive games
- Home runs
- Doubles
- Triples
- RBIs
- Consecutive game hitting streak

- Losses
- Games started
- Games finished
- Innings pitched
- Strikeouts
- And so on.

- Complete games
- Shutouts
- Earned run average
- Earned run intensity
- Walks
- Hit batsmen
- Wild pitches
- Batters faced

- Triple Crown
- 20–20–20 club
- 30–30 club
- 40–40 club
- Triple Crown

- Counting the number of consecutive games played
- The length of the longest winning streaks
- The length of the longest losing streaks
- Individual streaks
- Title streaks

## Walks plus hits per inning pitched – Wikipedia

As a metric in baseball statistics, the walks plus hits per inning pitched (WHIP) statistic is an abbreviation for the amount of baserunners a pitcher has allowed per inning pitched in a game. The WHIP is computed by summing the total number of walks and hits allowed and dividing this total by the total number of innings pitched in a given season. The walk-hit rate (WHIP) of a pitcher determines how often hitters reach base; a lower walk-hit rate suggests greater performance. While the earned run average (ERA) gauges the number of runs a pitcher allows, the earned run effective (WHIP) assesses a pitcher’s effectiveness while facing hitters.

## History

Daniel Okrent, a writer and novelist, coined the term “innings pitched ratio” in 1979 to refer to the number of innings pitched in a game. Because Sunday newspapers did not include hit batters in their statistics updates, Okrent did not include hit batsmen in the numerator of the number of baserunners permitted. Winning percentage against opponents (WHIP) is one of the few sabermetric statistics to make it into common baseball usage. Beyond its application in live games, the WHIP is one of the most often utilized statistics in infantasy baseball, and it is typical in fantasy leagues that use the 4, 5, and 6-6 formats, respectively.

## Leaders

In Major League Baseball, a pitcher with a WHIP of 1.00 or below over the course of a season will frequently rank among the league leaders (MLB). The lowest single-season WHIP in Major League Baseball history, up to and including 2018, is 0.7373, set by Pedro Martnezpitching for theBoston Red Sox in 2000, breaking the previous record of 0.7692 set by Guy Heckerof theLouisville Eclipse in 1882. Walter Johnson holds the third-lowest single-season WHIP in baseball history, with a 0.7803 WHIP in 1913.

As of 2018, right-handed pitcher Addie Joss held the Major League Baseball record for the lowest career WHIP with a 0.9678 WHIP in 2,327 innings of work.

With a career WHIP of 1.0003 in 1,2832 3 innings, reliever Mariano Rivera ranks third among qualifying pitchers in the American League. Clayton Kershaw, a left-handed pitcher for the Los Angeles Dodgers, finished fourth in the league with a WHIP of 1.0046.

## See also

- List of the all-time WHIP leaders in Major League Baseball

## References

- For batters, on-base plus slugging (also known as OPS) is a metric that is similar to batting average in that it attempts to be a measure of total performance.

## External links

- Baseball’s single-season WHIP leaders
- Baseball’s all-time WHIP leaders

## WHIP

Per Innings, the number of walks plus the number of hits The walks allowed per inning pitched (WHIP) is a measure of how many base runners a pitcher permits per inning pitched. Given that stopping base runners is the core duty of pitchers, a rate statistic meant to inform you how many they allow is a useful tool for determining their effectiveness in this regard. As a result, the WHIP statistic should be considered more of a fast reference statistic rather than something you should utilize for in-depth research.

- Additionally, WHIP fails to consider all times on base equally, equating a walk with a home run, which is incorrect.
- While WHIP is no longer at the forefront of statistical analysis, it is simple to calculate and correlates with more accurate data in a reasonable amount of time.
- It’s a touch rough around the edges, but it’ll serve you well as a starting point for the most part.
- What is WHIP and why is it important: The goal of pitching is to prevent runs, and run prevention is the goal of preventing base runners, therefore it seems natural that you’d be interested in how successfully a pitcher keeps base runners off the base paths.
- When asked “approximately how many base runners does this pitcher allow each inning,” the WHIP provides an answer.
- While there are faster ways to get to a comparable conclusion, WHIP is also the type of thing that is quite simple to compute, especially with minimal data sets.
- How to Make Use of WHIP: However, it’s vital to note that while pitching and defense play a role in base runner prevention, it’s crucial to remember that base runner prevention is a team effort.
- Home runs are the responsibility of the pitcher, but singles are the responsibility of both the pitcher and the defense.
- Due to the fact that it is calculated on individual occurrences rather than a series of events, the earned run average (ERA) is often a better measure of pitcher performance than other measures such as WHIP.
- It is preferable to have a lower WHIP, and you may use it as a basic estimate of dominance.
- Context: Please keep in mind that the following graphic is just intended to be a rough approximation, and that the league-average WHIP fluctuates from year to year.

Check out the FanGraphs leaderboards to discover what the league-average WHIP has been for every year from 1901 to the present. fangraphs.com/library/whip/index.html

Rating | WHIP |
---|---|

Excellent | 1.00 |

Great | 1.10 |

Above Average | 1.20 |

Average | 1.30 |

Below Average | 1.40 |

Poor | 1.50 |

Awful | 1.60 |

For more reading, see: Don’t Get WHIPped – FanGraphs