What Is A Po In Baseball

What Does Putout (PO) Mean In Baseball (Details)

The meaning of baseball abbreviations and terminology is vital to grasp if you want to become a better player. One often asked question we get is: What is the role of the ‘putout’ or PO in baseball? We’ll make an attempt to address this question by providing you with a concise description and an explanation of its purpose. We’ll also go over another baseball phrase that’s connected, and we’ll finish with some more questions to help you expand your knowledge and become a more well-versed baseball player yourself.

Put Out (PO)

The meaning of baseball abbreviations and terminology is crucial to grasp if you want to become a better player. One often asked question we get is: what is the role of the ‘putout’ or PO in baseball? With the help of a simple definition and its purpose, we’ll make an attempt to address this question. We’ll also go over another baseball phrase that’s connected, and we’ll finish with some more questions to help you expand your knowledge and become a more well-versed player on your own baseball team.

Catching a Flyout

A flyball occurs when a hitter lobs or smashes the ball in such a way that it flies into the air. If any of the defensive players manage to grab the ball before it touches the ground, the batter will be dismissed, and this will be referred to as a flyout. The foul area is not the only place where flyouts can occur. The putout is awarded to the player who successfully catches the flyball in the air.

Pitching The Third Strikeout

A strikeout occurs when a batter fails to strike out on the final pitch of the inning. This is a putout that is given to pitchers since they are the ones who threw the ball that went over the batter’s bat and into the stands.

Tagging a Base for a Forceout

A force out occurs when a hit or ground ball is collected by a fielder and then tagged at the base of the batter’s plate. The putout is awarded to the fielder who tagged the base in the first place.

Tagging a Runner for a Tagout

A force out occurs when a hit or ground ball is caught by a fielder and then tagged at the base of the plate. When a base is tagged, the putout is given to the fielder who tagged it.

Tagging a Base On An Appeal Play

It is called an appeal play when the defensive side draws the umpire’s attention to an arule infringement on the field. An appeal play in which the tagger successfully catches the ball and tags the base results in a putout that is awarded to the tagger.

Being Close to a Runner During Interference

When the batting team is penalized by the umpire for interfering with or impeding any fielder or the flow of play, this is referred to as interference. A fielder who is in close proximity to a base runner who has been suspected of interfering with the play is also given credit. Take a look at this video to learn more about the Runner Lane Interference Rule: “frameborder=”0” fullscreen is permitted if the following attributes are met: accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture “The Dark Knight Rises: What Went Wrong?” is the title of the article.

Put Out vs Assist

Another point that may be unclear to some is the difference between a putout and an assist, which is described below. This distinction is rather simple to comprehend. An assist is a play made by a player in order to aid other position players in reaching a putout. For instance, when a fielder sends a pitch to another player who tags a base in order to get the runner out, this is an example of a tag.

The fielder who threw the ball will be credited with the assist in this situation. The fielder receives an assist as long as he or she makes contact with the ball, even if it is inadvertent. Pitchers, on the other hand, do not receive assists for striking out opponents.


An additional point that may be unclear to some is the difference between a putout and an assist. That’s a rather straightforward distinction to grasp. It is a player’s responsibility to assist other position players in reaching a putout. For instance, when a fielder delivers a pitch to another player who tags a base in order to force a runner out, this is an illustration of the concept. It is in this instance that the fielder who threw the ball will be credited with the assist! It does not matter if the fielder accidentally touches the ball; assists are awarded as long as the fielder touches the ball.

What is a PO in High School Baseball?

As previously stated, high school and college coaches refer to a specialized player who understands how to pitch well as a ‘pitcher only’ when referring to that player’s abilities. The legitimacy of this technique is debatable, depending on who you speak with. A player’s ability to work on all parts of the game, according to some, will help them improve their grasp of the game and raise their chances of making it to the major leagues in the future. Others believe that concentrating on a single facet of the game and being really proficient with a ball or a bat is all that is required to become genuinely remarkable and will have the most influence on your long-term success.

What Does SO Mean in Baseball?

Some people may confuse SO with PO because they seem like comparable baseball statistics, but SO really refers to a’strikeout,’ which is what it is. As we’ve previously discussed in this article, strikeouts and their applications are a type of put out that is granted to the pitcher for recording his third strike when a hitter hits the ball with his bat. “Major League Baseball’s Top Strikeout Pitchers:” frameborder=”0″ The following attributes are permitted: acceleration sensor, automatic playback, encrypted-media, gyroscope, picture-in-picture, and picture-in-picture.

“Wisecrack Edition” > “Wisecrack Edition”


We hope that this article has answered some of your questions regarding PO, its definition, and how it is used in the sport of baseball. Make sure to browse the rest of our website for further information on a variety of baseball-related topics. We have materials to help you improve your knowledge and attain your full potential as a ballplayer, regardless of whether you are an experienced player or a complete novice. This page was last updated on

What Does PO Mean in Baseball? – A Simple Explanation

Baseball, like most other sports, is played using a system of codes, gestures, and acronyms. The answer to the question “what does PO signify in baseball” should act as the first step in becoming more familiar with the game of baseball. As you progress through the game, you will soon find that the interactions are made up of a variety of signals and codes.

Learning is a never-ending process that never ends. And, for the most part, learning involves doing and experiencing the dynamics that surround the PO rules in their natural environment.

What Does PO Stand for in Baseball

Among other things, the acronym PO means “putout” in baseball, as well as “pitcher only.” The putout (PO) is a credit awarded to the fielder who is able to physically document the whole occurrence of an out during play. It is necessary to make several adjustments while recording an out. The following maneuvers are examples of such actions: tag-a-runner, touching the base during a forceout, catching the third strike, standing closest to the baserunner who committed an interference, and catching a hit ball.

On the other side, the pitcher only (PO) designation denotes that a player is only concerned with performing his or her pitcher’s duties and is not permitted to bat or play other positions in the field.

Who Gets the Putout (PO) Credit

The following players are eligible to get putout credit:

  • Fielder: A fielder is simply a defensive player who plays the position of fielder. A pitcher, in addition to being a fielder, is responsible for defending the base by preventing the offensive team from entering the running position. It’s only via recording an out from the other team that they can accomplish this.

It is common to see fielders with a glove on their non-dominant hand, while their dominant hand throws the ball to the other team. Additionally, fielders can receive an unassisted putout in addition to the putout (PO). It is possible to get this credit if you do specific actions such as stepping on a base during a forceout, fielding a ground ball, or tagging a runner. In this particular instance, the rule states that the fielder is not eligible to receive the assist credit. If the fielder takes the ground ball and promptly transfers it to a teammate, therefore inducing an out on the other side, he earns credit for an aided putout (see below).

  • Catcher: During the course of the game, a catcher is responsible for a variety of tasks. When a catcher is able to catch pitches that result in strikeouts, he is awarded a putout.

Catchers and first basemen are often the players who receive the highest PO baseball score!

  • One of the primary responsibilities of a first baseman (1B) is to field first base and supervise the activities that take place in the area immediately surrounding it, such as the succession of baserunners.

Besides fielding first base, the first baseman (1B) is in charge of the events that occur in the immediate vicinity of the base, such as the succession of runners on first base.

Why is a Putout (PO) Important

First Baseman: In addition to fielding the first base, the first baseman (1B) is in charge of the events that take place in the vicinity of the base, including the succession of baserunners.

When Does a Player Become a Pitcher Only (PO)

Depending on the coach’s decision, a player may be assigned to the pitcher-focused position. Coaches are always in charge of determining when and when a player is designated as a pitcher exclusively (PO). It is not necessary for a coach to assign a player to the PO position to imply that the player is not capable of playing other positions on the squad. The coach takes the authority to choose whether or not someone should be given the PO for strategic reasons. Some players have the ability to multitask, switching from being a hitter to a baserunner to a fielder, and so on.

Even the formal status of the designation may vary over time, based on the choice of the team’s coach, which is another another variable to consider.

Examine the following events that might potentially place the player in a pitcher-only role to have a better grasp of the situation (note that all of these scenarios are justified as strategic decisions by the coach).

  • Having a separate practice session is necessary because coaches view the assignment of the PO position as a privilege bestowed upon the player.

In the majority of occasions, the pitcher position falls to a player making the move from a little-minor league (rookie) to a major league organization (advanced). As a result of the increased level of competition in major league games — not to mention the fact that the starting pitcher position is considered to be one of the most important and difficult roles in baseball — a more mature player would naturally require a significant amount of pitching practice outside of the team. This should be perceived as favorable to the player, especially considering the fact that not everyone on the squad receives adequate training time.

  • The dynamics of the team: The coach is unable to select players for the PO position at random. His work description necessitates him analyzing not only the individuals on his team, but also the team’s overall effectiveness.

The team’s dynamics: The coach cannot choose players for the PO position at random. In order to do his work effectively, he must examine both individual team members and their overall team cohesion.


So, what exactly does PO stand for in baseball? Putout or pitcher-only are the only two options. The putout is a reward given to fielders, catchers, baserunners, and other players who have successfully completed specific maneuvers throughout the course of a game. The pitcher-only position is one that is assigned by the team’s coach to a player who is only responsible for pitching. There are a variety of reasons for assigning this position.

Do High Schools normally have every pitcher be a PO?

Only three of the pitchers from our high school were able to get better than charity AB’s. One was the team’s greatest athlete and outfielder, and he batted for them. It was difficult to keep him out of either place since he could throw 380 routinely from the right side and 90 from the left side. Another was the coach’s son, and that’s enough to say about him. The third was the best reliever, but they needed his bat once it became evident that the coach’s kid couldn’t hit, so they permitted him to DH every other game or so.

See also:  How Much Is My Baseball Card Worth

I believe they simply must outperform their opponents on a consistent basis in order to break out of the mold in some coaches’ views.

“Fortunately, that is not difficult to achieve.” The best method, as with everything having to do with requesting playing time from a coach, would likely be to approach him and ask, “What do I have to show you in order for you to give me a look at DHing/playing X position?” We have a hard time believing that a youngster with these numbers (especially power figures, which are difficult to come by) would be unable to obtain a square response from the coach.

When all else fails, you either have to swallow it or try an end run: either convince a sympathetic assistant (such as the hitting coach) to tell the head coach that he needs this bat in the lineup, or make friends with the athletic director and casually inquire whether there is any policy prohibiting the baseball team from using a pitcher as a position player (which, of course, there isn’t), and seeing if the AD will equally casually inquire as to why the coach has been such a jerk.

(This, however, carries a significant danger.) To be completely honest, my experience has shown that coaches will create exceptions to regulations when doing so would help them win games, and players will go to bat for teammates when doing so will help the team win games.

Consider what would have happened if Florida State had implemented such a regulation six years ago: Buster Posey would be pitching in Triple-A right now. sigpic It is not whether or whether you fall that is important; everyone does; rather, it is how you recover from your fall that is important.

Putout – Wikipedia

According to Wikipedia, the free encyclopedia. Navigate to the next page Jump to the search results At first base, there was an unsuccessful putout attempt. aputout (sometimes known as a foul out when applicable) is a type of out in baseball statistics that is awarded to a defensive player who records anout by one of the following techniques while in secure control of the ball:

  • At-bats in which the ball is used to tag a runner who is not touching a base are known as “tagouts.” It is possible to put out batters or runners in baseball by catching and tagging them at the base of the infield flyout (aforce out, or if done after a flyout, adoubling off)
  • Appeal play involves catching a thrown ball and tagging a base in order to record an out. Being struck out after taking a third swing
  • A flyout is the act of catching a hit ball on the fly. Being in the most advantageous position in relation to a runner who has been flagged for interfering

All-time records

  1. Jake Beckley has 23,709 points
  2. Cap Anson has 21,695 points
  3. Ed Konetchy has 21,361 points
  4. Eddie Murray has 21,255 points
  5. Charlie Grimm has 20,711 points
  6. Stuffy McInnis has 19,962 points
  7. Mickey Vernon has 19,808 points
  8. Jake Daubert has 19,634 points
  9. Lou Gehrig has 19,510 points
  10. Joe Kuhel has 19,386 points.

Single season records

  1. Dave Foutz was born in 1886
  2. Tony Mullane was born in 1882
  3. George Bradley was born in 1876
  4. Guy Hecker was born in 1884
  5. Mike Boddicker was born in 1984
  6. Larry Corcoran was born in 1884
  7. Al Spalding was born in 1876
  8. Ted Breitenstein was born in 1895
  9. Jim Devlin was born in 1876
  10. Dave Foutz was born in 1887
  11. Bill Hutchinson was born in 1890
  12. Mike Boddicker was


  1. Yadier Molina has a 1,135-game hitting streak (with the Houston Astros in 1969)
  2. Yadier Molina has a 1,113-game hitting streak (with the St. Louis Cardinals in 2016)
  3. Russell Martin has a 1,065-game hitting streak with the Los Angeles Dodgers in 2007
  4. Mike Piazza has a 1,045-game hitting streak with the Los Angeles Dodgers in 1997
  5. Michael Barrett has a 1,035-game hitting streak with the Chicago Cubs in

First basemen

  1. Jiggs Donahue had 1,846 hits in 1907
  2. George Kelly had 1,759 in 1920
  3. Phil Todt had 1,755 in 1926
  4. Wally Pipp had 1,710 in 1926
  5. Jiggs Donahue had 1,697 in 1906
  6. Candy LaChance had 1,691 in 1904
  7. Tom Jones had 1,687 in 1907
  8. Ernie Banks had 1,682 in 1965
  9. Wally Pipp had 1,667 in 1922
  10. Lou Gehrig had 1,

Second basemen

  1. Bid McPhee had 529 points in 1886
  2. Bobby Grich had 484 points in 1974
  3. Bucky Harris had 483 points in 1922
  4. Nellie Fox had 478 points in 1956
  5. Lou Bierbauer had 472 points in 1889
  6. Billy Herman had 466 points in 1933
  7. Bill Wambsganss had 463 points in 24
  8. Cub Stricker had 461 points in 1887
  9. Buddy Myer had 460 points in 1935
  10. Bill Sweeney had 459

Third basemen

  1. Denny Lyons had 255 hits for the Philadelphia Athletics in 1887
  2. Jimmy Williams had 251 hits for the Pittsburgh Pirates in 1899
  3. Jimmy Collins had 243 hits for the Boston Beaneaters in 1900
  4. Willie Kamm had 236 hits for the Chicago White Sox in 1927
  5. Frank Baker had 233 hits for the Philadelphia Athletics in 1913
  6. Bill Coughlin had 232 hits for the Washington Senators in 1901
  7. Ernie Courtney had 229 hits for the St. Louis Browns


  1. 401 (Philadelphia Phillies, 1898)
  2. 404 (Philadelphia Phillies, 1906)
  3. 395 (Chicago White Sox, 1913)
  4. 392 (Chicago White Sox, 1914)
  5. Donie Bush: 425 (Detroit Tigers, 1914)
  6. Hughie Jennings: 425 (Baltimore Orioles, 1895)
  7. Joe Cassidy: 407 (Boston Braves, 1914)
  8. Rabbit Maranville: 407

Left fielders

  1. Donie Bush had 425 hits for the Detroit Tigers in 1914
  2. Hughie Jennings had 425 hits for the Baltimore Orioles in 1895
  3. Joe Cassidy had 407 hits for the Boston Braves in 1914
  4. Dave Bancroft had 405 hits for the New York Giants in 1922
  5. Eddie Miller had 405 hits for the Boston Braves in 1940
  6. Monte Cross had 404 hits for the Philadelphia Phillies in 1898
  7. Dave Bancroft had 396 hits for the New York Gi

Center fielders

  1. Taylor Douthit had 547 points in 1928
  2. Richie Ashburn had 538 points in 1951
  3. Richie Ashburn had 514 points in 1949
  4. Chet Lemon had 512 points in 1977
  5. Dwayne Murphy had 507 points in 1980
  6. Dom DiMaggio had 503 points in 1948
  7. Richie Ashburn had 503 points in 1956
  8. Richie Ashburn had 502 points in 1957
  9. Richie Ashburn had 496 points in 1953
  10. Richie Ashburn had 495 points

Right fielders

  1. Babe Ruth had 392 hits in 1932
  2. Al Kaline had 387 in 1961
  3. Dave Parker had 381 in 1977
  4. Ichiro Suzuki had 381 in 2005
  5. Ichiro Suzuki had 379 in 2004
  6. Austin Kearns had 374 in 2007
  7. Hunter Pence had 374 in 2013.

See also

The majority of children who participate in baseball are accustomed to trying out several positions to choose which they like. Having the ability to pitch, play the field, and hit are all important skills for certain children, and they often learn them all in the same game. As we grow older and proceed into more competitive baseball leagues, some children and their parents may begin to hear the phrase “pitcher only” from their coach on a consistent basis. But what exactly does the term “pitcher” signify in baseball?

It is customary for a pitcher just to be designated as such, meaning that the player will not be included in the batting order or assigned to any other position on the field.

What do players do when they are classified as pitchers only, given that it is unachievable for any player to throw continuously all day?

Explanation of the Pitcher Only Role

When it comes to baseball, most children are trained to play a variety of positions throughout their childhood. Some children enjoy pitching, while others enjoy playing in the outfield, while yet others enjoy playing in the infield, while still others enjoy playing catch. There are even some children who are capable of playing every position and can do all of those duties in a single game. When it comes to Little League baseball, coaches may love having players that can play many positions on their team.

This is around the time period during which players and parents begin to hear about the prospect of converting to a pitcher-only position.

Pitcher-only players can be used in a variety of ways depending on the coach, however players that are labeled as Pitcher Only will no longer be able to bat and will not be able to play any other positions on the field.

Some Coaches Believe Pitcher Only Players Have an Advantage

Some coaches are staunch believers that when a player is designated as a pitcher-only, that player has a number of benefits over other pitchers who are not designated as pitchers-only. Baseball sessions will be structured by these coaches in such a way that players who are exclusively in the pitcher’s role will have a separate practice from the rest of the squad. This is done in order to guarantee that these pitchers receive the appropriate amount of practice time that is focused on their pitching ability.

The better their club’s pitching staff performs, the less runs their team will allow for the season as whole. And, in addition to being a better overall pitcher, these athletes have a lower risk of injury because they are restricted to simply throwing for the time being.

Some Coaches Use Pitcher Only Player in Other Scenarios

Some coaches, on the other hand, are less rigorous in their understanding of a pitcher-only job, and this can lead to confusion. These coaches can recognize when a player have pitching ability, but they also recognize when a player possesses pitching ability in other situations, which they find important. Allowing these guys to bat, pinch-hit, pinch-run, and play in the field on rare occasions are some of the various scenarios that may be implemented. For these coaches, being assigned to a pitching-only duty does not rule out the possibility of participating in other situations.

What Does a Pitcher Only Player Do?

Coaches who define a pitcher-only job, on the other hand, may not be as rigid in their description. These coaches can recognize when a player have pitching ability, but they also recognize when a player possesses pitching ability in other situations, which they consider useful. Allowing these guys to bat, pinch-hit, pinch-run, and play in the field on rare occasions are some of the additional scenarios that may be implemented. Pitching solely in one situation does not rule out the possibility of playing in other situations, according to these coaches.

Stretching and Warming Up

One of the most essential things a pitcher can do is to maintain his or her physical fitness. Another important aspect of being fit and injury-free is to provide enough time for stretching and warming up before each workout session. Pitchers who begin throwing before adequately warming up increase their risk of harming their bodies and their teammates. Given that pitching demands the use of one’s full body, it is essential for pitchers to ensure that their complete body is warmed up before to taking the mound.

Pitchers must take personal responsibility for determining when they are ready to throw a pitch in either scenario.

Using Resistance Bands

Resistance bands are a pitcher’s best buddy when it comes to throwing. When it comes to warming up the pitching arm prior to a practice or game, resistance bands are a fantastic tool. They are also a terrific method for pitchers to keep their arm flexible in between innings.

When it comes to using resistance bands as a pitcher, there are a variety of options available. One of the most effective I’ve seen is the video below from You Go Pro Baseball, which goes over a wonderful warm-up routine that incorporates resistance bands.


Running is one activity that all coaches want their pitchers to do on a regular basis. In the past, pitchers would run poles during and/or after baseball practice sessions. When a player sprints around the warning track from foul pole to foul pole, this is referred to as running poles. To keep in shape, recuperate after a practice or game, or as an alternative form of punishment from the coach, players run poles. In baseball, coaches frequently employ pole running as a means of conditioning players, with pitchers generally putting in more mileage than positional players.

From just getting in shape to enhancing overall endurance and assisting pitchers in recovering after a throwing session, there are several advantages to exercising.

The majority of coaches prefer to incorporate pole running into their practices, but there are some who do not believe it is necessary.

Long Toss

Pitchers must have powerful arms in order to succeed. All pitchers strive to enhance their arm strength by using the long toss method of throwing. A long toss is a variation on the game of catch in which the two participants are substantially further apart from one another than in traditional catch. It varies from 100 feet to 400 feet, depending on the power of each player’s arm, how far they can throw during long toss. The further a pitcher can throw the ball, the stronger his or her arm becomes as a result.

See also:  What Are The Major League Baseball Standings

As a result, while long toss is a terrific thing for pitchers to work on, it should be kept to a bare minimum as far as the arm is concerned.

The majority of positional players benefit from five to ten minutes of long toss on a regular basis.

You may learn more about implementing an effective long throw program into your routine by reading thislong toss article from The Complete Pitcher.


A bullpen session is an essential component of every pitcher-only practice session. It is during bullpen sessions that pitchers are able to apply all they have learned and concentrate on their mechanics. While bullpen sessions before a game are an excellent method for pitchers to warm up before a game, bullpen sessions during practice are an excellent opportunity for pitchers to work with their coaches and fine-tune any specific parts of their delivery. Additionally, bullpens provide pitchers with an opportunity to try out new pitches or throwing approaches that they believe would be beneficial.

Check out my previous essay on what a bullpen session is and how it can benefit pitchers for a more in-depth look at what a bullpen session is and how it may benefit pitchers.

What is a PO in Baseball : Expert Explanation

You could be asking what a PO is in baseball, just as you might be wondering what FPS is. Because baseball is a sport that relies on concise forms and gestures, and PO is a component of that. In baseball, as the former great player Ted Williams famously stated, you can be a legend even if you only succeed three times out of ten times. The remaining seven occasions, a hitter fails to reach base because of a PO, also known as a putout.

What does PO mean in Baseball?

PO is an abbreviation for putout in baseball, as previously stated. Its significance in baseball, on the other hand, is a little more complicated. According to MLB.com, a putout is a strikeout in baseball. When a fielder is the one who makes the putout, he is awarded credit for it. He makes a tangible record of the act of completing a timed out session. It is possible for multiple players on the field at the same time to use different strategies of obtaining a putout. Also, keep in mind that in baseball, there is a distinction between a putout and an assist.

Common Ways to get Put Out in Baseball:

During this part, we’ll go over some of the most frequent methods in which a fielder, such as pitchers or catchers, might be given credit for a run scored in baseball. As a result of my investigation on the subject of a putout, I was able to identify six of the most typical methods of obtaining one. These are the seven methods: What is a catcher’s position in baseball Infographics

Force Play

First and foremost, we have the forceout, which is the most prevalent type of putout situation since it includes infield ground balls the vast majority of the time. Additionally, this putout strategy necessitates the participation of numerous fielding players, which contributes to its distinctive qualities. Force play can occur near the base in the case of a forceout or tagging. Consider the following scenario: a ground ball is headed towards the shortstop. It is the fielder’s responsibility to pick up the ball and throw it to first base in order to strike out the hitter.

Here are some of the most memorable forceouts in Major League Baseball’s recent history:

Ground Ball outs PO issue:

In the majority of ground ball PO situations, the fielder who tags out the baserunner or batter will be the one who receives credit for the catch. In baseball, the player who catches the ground ball and tosses it does not receive the Player of the Game award.

Tag Play

In the second spot on the list of common putouts in baseball, we have the tag play, often known as the tagout. A tagout point of order is awarded to the person who tags out the batter or runner, similar to a forceout point of order. The distinction is that the out occurs when a fielder tags the batter running rather than the base to which they are attempting to advance.

Furthermore, a hit ball is not required for the tagout procedure. While it is uncommon, a fielder can tag out a player who is attempting to steal a base or pick off an opponent. It is the one who tags out the runner who will receive the PO credit in both circumstances.

Fly Ball

I’ll discuss about the fly ball or flyout putout in baseball in my third and last section of this article. A flyout will, without a doubt, result in a fly ball. However, with a flyout PO, the outfielders are the ones that are most heavily involved. By fly ball, I mean any ball that is caught in the air, but I also include infield pop-ups that are caught in the air. In the case of a hitter hitting a fly ball into foul territory and a fielder catching it, the batter will be outed as the batter.


When I was a baseball catcher, this was often how I was given credit for putouts when I was on the field. A third strikeout is essentially the catcher’s last strike that he or she has caught (it can also be a tag). Taking the position of the catcher as an example, if I am playing baseball and I strike out a player, I may then toss the ball to first base in order to strike out the first baseman. As a result, I will not be eligible for the second putout in that situation.

What is SO mean in Baseball?

If you are a true baseball enthusiast, it is conceivable that you have come across the statistic SO in the game of baseball. It’s important to remember that SO and PO are not the same thing in baseball. SO in baseball is an abbreviation for strikeout, and it is generally awarded to the reliever or starting pitcher when the hitter misses the ball during his at-bat, whether it be the last strike or the third strikeout of the inning.

Interference Play

The interference play, which is the second to final putout in a baseball game, is the rarest of all putouts in a baseball game. There are four different sorts of interference plays in baseball, but only two of them are credited with a putout. Offensive interference is the first instance in which PO is credited in baseball. Simply simply, offensive interference occurs when a member of the batting team or a runner prevents a player from making a play. While the one who is late will be called out, the one who is blocked will receive a PO point.

In this sort of interfering play, the ball is touched by a fan who has reached over and touched it, whether it is in the air or on the ground.

The player who attempted to catch the ball will receive a penalty point.

Appeal Play

We come to the sixth most common putout scenario in baseball, which is referred to as an appeal play (also known as an appeal out). In this scenario, defensive players raise their hands to report a rule infraction to the ref. If a player is able to catch a ball and tag out another player as a result of an appeal, that player is awarded a putout.

Putout Records in Baseball

In baseball, every statistic and every play has some sort of historical significance attached to it. Some players have established some impressive records in a variety of categories, ranging from statistics such as WHIP, ERA, and FPS to performances such as cycles. As a result, putout isn’t much more complicated. These results are consistent throughout all levels, including the national league.

As part of our investigation into baseball’s putout records, we looked throughbaseball-reference.com to compile a list of some of the more notable ones. Players in baseball, such as first basemen and other position players, are susceptible to PO.

Career PO Records in Baseball

The following players possess the most career PO baseball records:

SL Name PO
1 Jake Beckley (20) 23767
2 Cap Anson (27) 22572
3 Ed Konetchy (15) 21378
4 Eddie Murray (21) 21265
5 Charlie Grimm (20) 20722
6 Stuffy McInnis (19) 20120
7 Mickey Vernon (20) 19819
8 Jake Daubert (15) 19634
9 Lou Gehrig (17) 19525
10 Joe Kuhel (18) 19386

Single Season Putout Records in Baseball

The following are the top season PO record holders:

SL Name PO Year
1 Jiggs Donahue (27) 1846 1907
2 High Pockets Kelly (24) 1759 1920
3 Phil Todt (24) 1755 1926
4 Wally Pipp (33) 1710 1926
5 Jiggs Donahue (26) 1697 1906
6 Candy LaChance (34) 1691 1904
7 Tom Jones (33) 1687 1907
8 Ernie Banks (34) 1682 1965
9 Wally Pipp (29) 1667 1922
10 Lou Gehrig (24) 1662 1927

Active Putout Records in Baseball

The following are the current PO record holders:

SL Name PO
1 Albert Pujols (21, 41) 17460
2 Yadier Molina (18, 38) 14720
3 Joey Votto (15, 37) 13948
4 Freddie Freeman (12, 31) 12430
5 Paul Goldschmidt (11, 33) 12129
6 Eric Hosmer (11, 31) 11747
7 Anthony Rizzo (11, 31) 10951
8 Kurt Suzuki (15, 37) 10528
9 Miguel Cabrera (19, 38) 10448
10 Carlos Santana (12, 35)

What is Pitcher Only(PO) in Baseball?

In baseball, there is another slang term with the abbreviation PO. This second slang phrase is only used by pitchers, and it is most commonly heard in the high school college baseball league. A pitcher only is, to put it simply, a label given by a school or college coach to a player who only plays in the pitching rotation. Major league baseball does not have a lot of these kind of POs. Because a PO is a player who just pitches, the coach of that player will most likely have the player practice in a different manner.

Other options include employing equipment that the majority of other players will not use to improve themselves in a different way.

Frequently Asked Questions(FAQs)

The answer is, unfortunately, no. Due to the fact that a strikeout is only awarded to pitchers who record an out. In baseball, on the other hand, a fielder who catches the ball or runs out a hitter or runner is awarded a putout.

What is the difference between Putout and Pitcher Only in Baseball?

Only in baseball is there a real distinction between a putout and a pitcher in terms of skill. In light of the fact that baseball jargon refers to two very distinct things. A putout (PO) is a type of baseball play in which players strike out a batter or a baserunner in a variety of situations. In contrast, pitcher only players are a label given by a coach, usually in a high school league, to a player who will only throw in that particular game.

Is there a difference between an assist and a PO in baseball?

Consider the situation of a fielder who throws the baseball to the shortstop, who subsequently tags out the baserunner. In baseball, the shortstop who tagged out the player will be awarded the point of victory, while the fielder who threw the ball will be awarded an assist. In baseball, the distinction between a putout and an assist is important.

Is Putout important in Baseball?

Simply simply, putout is a tool that allows baseball players to demonstrate their abilities. Additionally, it assists in making some of the other more intricate aspects of baseball more understandable for both spectators and authorities.


Finally, I hope you gained an understanding of what a PO in baseball is. It is frequently mentioned, a statistic indicating how many times a player has called a batter or a baserunner out. Nonetheless, it is possible to have a pitcher-only player, or a player who just pitches. Keep in mind that a pitcher-only position is most commonly seen in high school baseball or college leagues, rather than in Major League Baseball itself.

PO in baseball, like many other baseball statistics such as WHIP, ERA, RBI, FPS, and DFAa, is intended to assist you in determining how excellent a player may be on the field.

What Does PO Mean in Baseball? (Putout)

It might be difficult to understand MLB news stories at times. You may look for items such as strikeouts, shutouts, and putouts in baseball. Putout is the measure that many people are most interested in, despite the fact that it appears in all of the other metrics. So, what exactly does the term “putout” or “PO” imply in baseball? An out happens when the fielder makes the first physical contact with the ball after it has been pitched. A baserunner will be tagged with an out if that player completes the play by himself or herself.

See also:  How To Wash Baseball Hats

Consequently, what exactly is the distinction between a PO and an assist?

Continue reading if you want to learn more about this subject and have the answers to these questions in hand.

What is a PO in Baseball?

Putting out a runner is attributed to the fielder who physically records the act of putting him out in a game of baseball. Additionally, if he is the person nearest to a request for interference, he can receive one. When it comes to putouts, first basemen and catchers are often the highest-producing players on the field. When a fielder steps on a base and tags a runner, he is not given credit for the assist. An out is awarded to him if, after making an outfield play on a ground ball, he delivers the ball to another teammate who then makes a play on it.

Here are a few illustrations:

  • Catching a fly ball
  • Tagging an appeal play to a base
  • Pitching the third strikeout
  • Tagging a tagout to a runner
  • Tagging a forceout to a base
  • Being in close proximity to a baserunner while there is interference

What is the Difference Between a PO and an Assist?

Putouts are performed for the benefit of the opposing team. Anassistis completed for a teammate in order to assist them in reaching a putout. Moreover, don’t mistake PO with another baseball statistic that has the same truncated initials but is referred to as “pitcher only.” The majority of the time, reports identify PO as putouts. High school and college baseball leagues, on the other hand, can use the term PO to refer to players who can solely perform the pitching job and are not otherwise qualified.

Who Has the Most POs in MLB History?

Baseball, like any other sport, puts athletes’ abilities to the test on and off the field. As a result, it should come as no surprise that some MLB players perform far better than others, particularly when it comes to getting putouts. The players listed here are only a few of the best in the world. Jacob Peter Beckley was an American professional first baseman who played in Major League Baseball from 1888 to 1907. He was born in New York City and lived in New York City until his death in 1907.

  • In 1971, he became the first African-American to be inducted into the National Sports Hall of Fame.
  • The league only lasted one season and consisted of a single team.
  • Beckley had previously been dealt to the Giants in 1896.
  • Beckley hit three home runs in one game against the Louisville Colonels on September 26, 1897, when the Cincinnati Colonels took on the Louisville Colonels.
  • He is still considered to be one of the most important first basemen in the history of the game.
  • Adrien Constantine Anson was an American first baseman who played in the Major Leagues for a total of 27 seasons.
  • It was with the Chicago Cubs, subsequently known as the White Stockings, that he spent the most of his professional baseball career.

He spent his retirement years in Chicago, where he was involved in a variety of business ventures.

His teammates dubbed him “Anson’s Colts,” which means “Anson’s Colts.” In 1939, he was elected into the Baseball Hall Of Fame, which he still has today.

With a score of 21,695 in this category, he is still in second place all-time in Major League Baseball history for the most putouts.

He grew up in the sandlots of the city, where he learned to play baseball.

Despite having their first winning season in a decade, the club ended fifth in the National League, with Konetchy leading the league in hits with a.324 average and eight home runs, and finishing fifth in the American League.

After being released by the Boston Red Sox, he returned to the National League to play baseball.

By the end of 1920, he had over 2000 hits, and he was ranked quite high on the all-time hits list at the time.

He finished with a total of 21,361 putouts throughout the course of his career.

Louis Cardinals in 1907, and he went on to have a long and successful career with the team.

Eddie Clarence Murray, often known as ‘Steady Eddie’ by fans and colleagues, is a former Major League Baseball designated hitter and first baseman.

He spent the most of his professional baseball career with the Baltimore Orioles.

Andrew Murray was elected into the Baseball Hall of Fame in 2003, and many consider him to be the fifth-best first baseman in the history of the Major League Baseball.

In addition, he was a finalist for the All-Century Team.

Murray was the first African-American to be honored.

Murray stated that he never felt like he was just one guy, but rather that he was part of a team.

Murray was able to accumulate a total of 21,255 putouts during the course of his career.

A putout is recorded when a base is touched prior to a force play, when a fly ball is caught, or when a throw is made to first base.

Despite the fact that putouts are quite common in professional baseball, several players, such as Jake Beckley, Cap Anson, and Eddie Murray, have more than any other athlete in the history of the league.

Aaron Jones

Welcome to Make Shots, my name is Aaron and I am the proprietor. On this website, I answer the most often asked basketball topics and provide my thoughts on the subjects. The beginning of my passion for basketball occurred in 2010, and I have been a fan of the sport ever since. All of the posts

PO (Baseball) – Definition – Lexicon & Encyclopedia

Definition of a PO This article provides an explanation of what the abbreviation “PO” stands for. The many definitions, examples, and related terminology mentioned above have all been authored and collated by the Slangit team from their different sources. Putout (PO) is an abbreviation for Putout (PO). Putouts are awarded to a fielder who is the one who physically records the act of completing an out- whether it is by standing on the base for an out, tagging a runner, fielding an abatted ball, or fielding an out-of-swinging strike.

  1. The number of times a defensive player gets the ball and tags the runner or the base before the opponent reaches the plate, resulting in an out.
  2. PlateAppearance The manner in which a player enters the batter’s box.
  3. PO Putout Putout A batter or runner is retired from the game by a member of the defense.
  4. P: F 6 = 0=0 P: F 6 = 0=0 C: F 6 = 1=1 = C: F 6 = 1=1 = C: F 6 = 1=1 = C: F 6 = 1=1 1B: F 6 = 2=2 = 2=2 = 2=2 2B: F 6 = 5 4 P O + A G= cdot+ cdot+ cdot+ cdot+ cdot+ 3B: F 6 = 4 2; 3B: F 6 = 4 2.
  5. It’s a double-header.

The game will tell you when to be a PO, but what does that mean?

Cherokee, here’s something more to consider. Instead of having him play as a PO for the travel team with the caveat that he play with a less talented team in their organization as a position player ONLY, why not have him play as an outfielder for a completely different organization? This is something I strongly recommend your son does as a sophomore. Getting recognized will be easier if the organization that wants to hire him as a PO is a competitive one that participates in high-profile competitions.

  • This was a problem for my son.
  • They wanted him to be a pitcher, but they also assured him that he would have a chance to play outfield and bat.
  • The fact is that there were a number of men who were better with the bat than he was.
  • Fast forward to 2014, when the 18U WWBA and 17U WWBA compete.
  • He’d been throwing a tantrum when the coach wouldn’t allow him hit and run because we’d struggled to score runs in a few of games and had numerous men K looking.
  • He was brought into the lineup for our third pool game, which was against a very talented squad (I believe it was the NE Roughnecks).
  • In my role as a father, this gave me confidence that he could handle that velocity no matter what happened in the future.

I was confident that my son would be a two-way street.

Coach notices him and brings him to the side, where he inquires as to what he is doing.

The coach asked his kid, “Son, what would happen if you dove for a ball in the outfield or if you got your hand stomped on while sliding into a base?” You are significantly more useful as a left-handed pitcher who throws 92 mph than you are as a batter.

Now, son continued to hit throughout high school and was really proficient.

If you look at his bio information, it clearly states that he is not simply a dad who is spouting smoke.

My confidence in his ability to strike and defend at his present school, even though I may be looking through rose-colored glasses, remains unshaken as a father. However, we will never know since the game informed him that the mound was where his destiny lay.

Putouts and Assists

(Photo courtesy of Associated Press/The Canadian Press, Chris Young) A putout (PO) is awarded to a fielder who successfully knocks out an offensive player in accordance with scoring rule10.09. According to scoring rule 10.10, fielders who make a significant contribution to an offensive player being forced out are given an assist (A).


A putout is awarded to a fielder who successfully throws out a hitter or runner. Typical occurrences of this include catching a fly ball, tagging a base that a runner is forced to, and tagging a runner off of a base, among other situations. In addition, a catcher receives credit for a putout when a batter strikes out. (*) In addition, there are a number of situations in which automatic outs are triggered. The following accomplishments are all attributed to the catcher:

  • Whenever a fielder successfully strikes out a hitter or runner, the putout is given credit. Typical occurrences of this include catching a fly ball, tagging a base that a runner is forced to, and tagging a runner off of a base, among other things. On top of that, when a strikeout occurs, a catcher is given credit for a putout. (*) Automatic outs may also be invoked in a variety of conditions. The catcher is responsible for the following accomplishments:

The following automatic outs are awarded to the proper fielder in the order shown below:

  • Infield fly not caught – fielder who should have made the catch
  • Runner out after being hit by a batted ball – fielder who should have made the catch
  • Runner out after running out of base line to avoid a tag – fielder whom the runner avoided
  • Runner out after passing another runner – fielder who should have made the catch
  • Runner out after being interfered with – fielder who should have made the catch
  • Runner out after being hit by a batted ball
  • Note: If a fielder was throwing the ball, the assist should be given to the fielder and the putout should be given to the person to whom the ball was being thrown.

If the batter is out due to runner interference (i.e., an automatic double play), the first baseman should be given the putout. Putout the first baseman because the batter was forced out due to runner interference (i.e., automatic double play).


Each fielder who made a contribution to getting a batter or runner out should be given an assist. The term “putout” refers to when a fielder throws the ball to another fielder, who then receives credit for the putout as mentioned above. Please take note of the following particular issues and exceptions:

  • Although no outs are recorded as a result of a mistake (for example, a shortstop throws to the first baseman in plenty of time and he drops the ball), a fielder receives an assist. SS gets the A, the first baseman gets the E, and no hit to the batter)
  • s credit an assist if the ball is deflected off a fielder and there is a later putout. Example: A line drive glances off the pitcher and is caught by the third baseman, who tosses it to first for an out. The following rules apply: a fielder who throws the ball more than once in a run-down play can only be given one assist
  • Pitchers do not receive assists on strikeouts or caught stealings
  • No assist is recorded for a fielder who throws a wild throw and a runner who attempts to advance is put out
  • And no assist is recorded for a fielder who throws the ball multiple times in an infield play can only be given one assist. (For example, a catcher may toss the ball towards centerfield in an effort to rob a runner who is on his way to second base.) It is not considered an assist when the runner makes a successful attempt to advance to third base and is thrown out by the outfielder.

Leave a Reply

Your email address will not be published.