## Baseball Abbreviations

Tony Gwynn had another outstanding season in 1997, with 592 at-bats and 220 strikeouts, and an avg of.372, which was the best in the National League. Which of these abbreviations do all of these letters stand for? The Baseball Almanac is glad to give a standard collection of acronyms that are seen and used in print on a regular basis in the sport of baseball.

## Baseball Stats

Baseball Abbreviations 101Offensive Abbreviations for Statistics | |

ABBBAVGCS2BGIDP GRSLHBPHHRRHRIBBISO LOB OBPOPSRRBISFSHSSLGSB%SBRSBSOTB3B | At BatsBases on Balls (Walks)Batting AverageCaught StealingDoublesGround into Double Plays Grand SlamsHit by PitchHitsHome Run RatioHome RunsIntentionalBasesonBalls(Walks)Isolated Power Left on Base On-Base PercentageOn-Base Plus SluggingRunsRuns Batted InSacrifice FliesSacrifice Hits (Bunts)SinglesSlugging PercentageStolen Base PercentageStolen Base RunsStolen BasesStrikeoutsTotal BasesTriples |

Pitching Abbreviations for Statistics | |

AOBB BFPBKCBOCGCGLERERAGFGOGOAOGPGSHHBPHRIBBIPIRAIPSLMB9OBAPARRPFRWS/SHOSOSVSVOTBWWP | Fly Outs (Air)Walks (Bases on Balls) Batters Facing PitcherBalksCombined ShutoutComplete GamesComplete Game LossesEarned RunsEarned Run AverageGames FinishedGround OutsGround Outs / Fly Outs RatioGames PlayedGames StartedHitsHit BattersHome RunsIntentional WalksInnings PitchedInherited Runs AllowedInnings Per StartLossesBaserunners Per 9 InningsOpponents’ Batting AveragePlate AppearancesRunsRelief FailuresRelief WinsShutoutsStrikeoutsSavesSave OpportunitiesTotal BasesWinsWild Pitches |

Defensive Abbreviations for Statistics | |

ACSDPEGPOFAPBPKPOSBTCTP | AssistsCaught StealingDouble PlaysErrorsGames PlayedOutfield AssistsPassed BallsPickoffsPutoutsStolen Bases Total ChancesTriple Plays |

Miscellaneous Abbreviations for Statistics | |

ML SER | Major League Service |

Baseball Stats Abbreviations 101 |

The “common” set has several variations (DO Doubles, TR Triples, etc.), but these are the ones that are regarded “official” and are the ones that are used here at Baseball Almanac, among other places. Did you know that the National Association (a non-official league that gave rise to the National Leagueofficial )’s statistics were destroyed in a fire in the early 1900’s? Major League Baseball organized a Special Baseball Records Committee in the 1960s to examine the irregular records that had been kept previous to the 1920 season.

## What Does DP Mean In Softball?

The most recent update was made onDP Designated Player is a term that is commonly used. Consider it comparable to a Designated Hitter in baseball, with the exception that a designated hitter in baseball can bat in the place of another player already in position, but a designated hitter in football cannot play defense at any time.

## DP in Defense

Fast pitch softball is a team sport in which a designated player (DP) can substitute for an injured or outfielder, as well as briefly play defense, before returning to their normal position later in the game. Depending on whether you’re a designated player or on the offensive team, you’ll be referred to as the “pinch runner” or the “pinch hitter.” DP Rule of Flexibility The USSSA and the DP Flex Rule Softball NCAA essentially state that the only person who can play pinch runner is the player on defense (known as the flex) who was substituted by the pinch runner.

## Basic Softball Substitution Rules

- The DP title allows him to play any defensive position
- The DP and Flex titles never expire, even when they are utilized
- During the game, team member numbers can change from 10 to 9 or 9 to 10 an endless number of times. The defensive player who is not the FLEX will still get to bat if DP substitutes the defensive player who is. Both DP and Flex are capable of playing defense at the same time. DP and Flex cannot play offense at the same time because the only position a Flex may replace in offense is the DP
- DP, Flex, and replacements must all be in the same location in the batting order
- DP, Flex, and substitutes must all be in the same spot in the batting order

## Using a DP and Flex

To have a better understanding of the roles of the Designated Player and Flex in your softball game, watch this video for further insight: Designated Player and Flex in Softball Game allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media” allowfullscreen “The Dark Knight Rises: What Went Wrong?” is the title of the article.

“Wisecrack Edition” > “Wisecrack Edition” The use of a DP Flex Cheat Sheet may be extremely useful in reminding you of the laws of softball replacement, but what’s even more crucial is keeping track of your lineup by utilizing a lineup card, which can be found here.

If you’re interested in a cheat sheet because it’s a new rule and it may take some time to remember the conditions, you can consider printing this downloadable file to keep with you during softball games.

onAUTHOR has been updated AlexisAlexis has been involved in baseball since he was about ten years old. The 2020 high school graduate is presently pursuing his aim of becoming a professional baseball player in order to fulfill his childhood ambition.

## DP Meaning in Baseball – What does DP mean in Baseball? DP Definition

The definition of DPis Double Play, as well as additional meanings, may be found at the bottom of this page. DPhas five different meanings in baseball terminology, which are listed below. All of the connotations associated with the DP acronym are found solely within the context of baseball terminology, and no additional meanings are discovered. Other possible meanings can be found by visiting the DP meaning page. As a result, you will be sent to a website that contains all of the meanings of DP.

## DP Meaning in Baseball

- Designated Player Dustin Pedroia
- Dustin Pedroia
- Double Plays
- Double Plays Turned

There are a variety of additional places where you may learn about DP meaning for Baseball.

- More DP definition may be found at Acronym24.com. Click here to read about DP on Wikipedia. And lastly, search for DP Baseball in Google over and over again.

## What does DP stand for Baseball?

We generated a list of searches for the DP acronym in baseball search engines. In order to compile this webpage, the most often asked DP acronym questions for Baseball were chosen and published on it. Although we believe the search engine answered your inquiry about the meaning of the baseball DP complete form in a similar manner, we are confident that the following list of baseball DP queries will pique your interest.

### What does DP meaning stand for Baseball?

- It stands for ‘Double Plays,’ and it is used in baseball to denote this.

#### What is DP definition?

- “Designated Player” is the full version of the DP acronym.

###### What is the full meaning of DP in Baseball?

In addition to the meanings of the DP designation in baseball, the site has information on other sports as well. Yes, we are aware that your primary goal is to provide an explanation of the DP acronym in baseball. However, we believed that, in addition to the meaning of the DP meanings in Baseball, you might be interested in the astrological information associated with the DP acronym in Astrology. As a result, the astrological meaning of each word in each DP abbreviation is also provided.

##### DP Abbreviation in Astrology

- D.P. (letter D)Once you’ve made up your mind that you’re interested in someone, you’ll go all out in your pursuit of them. You are not one to give up on a mission quickly. You are a kind and compassionate individual. If someone has a problem, this turns you on because you want to help them. It is possible that you are possessive and jealous of others because you are intensely sexual, passionate, loyal, and intense in your engagement. To you, sex is a pleasure that should be savored. You are stimulated by the quirky and odd, and you have a free and open attitude toward life. Your social propriety is highly important to you, and you are a DP (letter P). You wouldn’t consider doing something that may jeopardize your image or reputation under any circumstances. Appearances are important, thus you should choose a companion who is attractive. You will also require a companion who is clever. Contrary to popular belief, you may regard your partner as a potential adversary
- A successful fight increases the amount of sperm in your system. If you have any sexual reluctance, you are in the minority. You are open to new ideas and prepared to experiment with different approaches. You are a very gregarious and sensual person
- You take pleasure in flirting and require a great lot of physical satisfaction.

## Baseball Acronyms – Abbreviations

To be successful in handicap games, you must be familiar with the jargon and abbreviations used in the industry. In the list below, you’ll discover a collection of baseball acronyms that you’re likely to see on stat sheets and in box scores. USE YOUR VISA CARD TO DEPOSIT AT ATSPORTS AND PLACE A BET ON MLB GAMES BETTINGAB:At bats is a good bet. ADP is an abbreviation for Average Draft Position. AL stands for American League. A:Assists Batting average (BA): BA A:Batting average versus the opposition BB:Base on balls is an abbreviation for Base on Balls (walk) BF:Batters were up against it BK:Balk BS:Blown opportunity CG: The game has been completed.

- ERA is an abbreviation for earned run average.
- GB stands for ground ball.
- G/F: The ratio of ground balls to fly balls.
- HP:Home plate is spelled with a capital letter.
- LOB:Left over on the field Major League Baseball (MLB) is a type of baseball played in the United States.
- OF:Outfield OBP is an abbreviation for on base percentage.
- PB: The ball was passed to me.
- R:Run was successful.
- RISK:Runners in scoring position are at risk.
- SHO:Shutout SP: The pitcher who will start the game.

The proportion of SV:SaveSLG:Slugging TB:Total number of bases TC:Total number of possibilities TP:Three-way play WHIP is calculated as follows: walks plus hits divided by the number of innings pitched. Wild pitch is the name of the game. X BH: Base hits in addition to the regular base hits

## Sports

Definitions of Baseball Terms | |

% Inherited Scored | A Relief Pitching statistic indicating the percentage of runners on base at the time a relief pitcher enters a game that he allows to score. |

1st Batter OBP | The On-Base Percentage allowed by a relief pitcher to the first batter he faces in a game. |

Active Career Batting Leaders | Minimum of 1,000 At Bats required for Batting Average, On-Base Percentage, Slugging Percentage, At Bats Per HR, At Bats Per GDP, At Bats Per RBI, and K/BB Ratio. One hundred (100) Stolen Base Attempts required for Stolen Base Success %. Any player who appeared in 1995 is eligible for inclusion provided he meets the category’s minimum requirements. |

Active Career Pitching Leaders | Minimum of 750 Innings Pitched required for Earned Run Average, Opponent Batting Average, all of the Per 9 Innings categories, and Strikeout to Walk Ratio. Two hundred fifty (250) Games Started required for Complete Game Frequency. One hundred (100) decisions required for Win-Loss Percentage. Any player who appeared in 1995 is eligible for inclusion provided he meets the category’s minimum requirements. |

BA ScPos Allowed | Batting Average Allowed with Runners in Scoring Position. |

Baserunners per Nine Innings | These are the hits, walks and hit batsmen allowed per nine innings. |

Bases Loaded | This category shows a player’s batting average in bases loaded situation. |

Batting Average | Hits divided by At Bats. |

Bequeathed Runners | Any runner(s) on base when a pitcher leaves a game are considered bequeathed to the departing hurler; the opposite of inherited runners (see below). |

Blown Saves | This is charged any time a pitcher comes into a game where a save situation is in place and he loses the lead. |

Catcher’s ERA | The Earned Run Average of a club’s pitchers with a particular catcher behind the plate. To figure this for a catcher, multiply the Earned Runs Allowed by the pitchers while he was catching times nine and divide that by his number of Innings Caught. |

Cheap Wins/Tough Losses/Top Game Scores | First determine the starting pitcher’s Game Score as follows: |

- Start with a number of 50
- The starting pitcher gets one point for every strikeout he records
- After the fourth inning, add 2 points for each additional inning the pitcher goes on to complete. For each strikeout, add one point to your total. For each hit that is permitted, deduct two points. For each earned run that is permitted, subtract 4 points. Add 2 points to account for an unearned run. For each stroll, deduct one point from your total.

Cleanup Slugging% | The Slugging Percentage of a player when batting fourth in the batting order. |

Clutch | This category shows a player’s batting average in the late innings of close games: the seventh inning or later with the batting team ahead by one, tied, or has the tying run on base, at bat or on deck. |

Complete Game Frequency | Complete Games divided by Games Started. |

Defensive Batting Average | A composite statistic incorporating various defensive statistics to arrive at a number akin to batting average. The formula uses standard deviations to establish a spread from best to worst. |

Earned Run Average | (Earned Runs times 9) divided by Innings Pitched. |

Fast-A | Otherwise known as “Advanced A,” these A-level minor leagues are the California League, Carolina League and Florida Stat League. |

Favorite Toy | The Favorite Toy is a method that is used to estimate a player’s chance of getting to a specific goal in the following example, we’ll say 3,000 hits.Four things are considered: |

- Needed Hits – the number of hits required to get the desired result. (Of course, this could also be “Need Home Runs” or “Need Doubles” – whatever you choose to call it.)
- Years Remaining in the Contract. The formula 24-.6 is used to estimate the number of years that will be required to achieve the target (age). As a result of this approach, players under the age of 20 have 12.0 seasons left on their contract. Players under the age of 25 have nine seasons left on their contract, players under 30 have 6.0 seasons left on their contract, and players over 35 have just three season left on their contract. Any athlete who is currently actively participating in competitive sports is presumed to have at least 1.5 seasons left, regardless of his or her age. Hit Level has been established. For 1996, the established hit level would be calculated by multiplying 1993 hits by two times 1994 hits by three times 1995 hits by six, and then dividing the result by six. A player, on the other hand, cannot have an established performance level that is less than three-fourths of his most recent performance level
- For example, a player who had 200 hits in 1995 cannot have an established hit level that is less than 150
- Hits that are expected to be made in the future. This is calculated by multiplying the second number (the number of ears left) by the third number (the established hit level)

Once you have obtained the projected remaining hits, the probability of achieving the objective is calculated as (projected remaining hits) divided by (require hits), minus.5. If your “require hits” and your “projected remaining hits” are the same, you have a 50 percent probability of achieving your target using this technique of calculation. If your anticipated remaining hits are 20 percent greater than your required hits, you have a 70 percent probability of achieving your target in time. There are two specific rules, as well as a note:

- The probability of a player continuing to develop toward a goal cannot be more than.97 per year. For example, a player cannot calculate that they have a 148 percent probability of completing their goal because this is against the rules.)
- The possibility of a player continuing to develop toward the objective cannot be more than.75 each season if his offensive winning percentage is below.500 throughout the season. If a below-average batter is two years away from attaining a goal, his likelihood of accomplishing that objective cannot be proved to be better than nine-sixteenths of a percent, or three-fourths times three-fourths, no of his age.
- Rather of using actual figures from a complete season of play, we utilized predicted metrics for 1994 and 1995.

Fielding Percentage | (Putouts plus Assists) divided by (Putouts plus Assists plus Errors). |

First Batter Efficiency | This statistic tells you the batting average allowed by a relief pitcher to the first batter he faces. |

GDP per GDP Situation | A GDP situation exists any time there is a man on first with less than two outs. This statistic measures how often a player grounds into a double play in that situation. |

Go-Ahead RBI | Any time a player drives in a run which gives his team the lead, he is credited with a go-ahead RBI. |

Ground/Fly Ratio (Grd/Fly) | Simply a hitter’s ground balls divided by his fly balls. All batted balls except line drives and bunts are included. |

Hold | A Hold is credited any time a relief pitcher enters a game in a Save Situation (see definition below), records at least one out, and leaves the game never having relinquished the lead.Note: a pitcher cannot finish the game and receive credit for a Hold, nor can he earn a hold and a save. |

Inherited Runner | Any runner(s) on base when a relief pitcher enters a game are considered “inherited” by that pitcher. |

Isolated Power | Slugging Percentage minus Batting Average. |

K/BB Ratio | Strikeouts divided by Walks. |

LateClose | A LateClose situation meets the following requirements: |

- During the seventh inning or later, the batting side is either up by one run, tied, or has a possible tying run on base, at the plate, or on deck
- The game is over

Leadoff On Base% | The On-Base Percentage of a player when batting first in the batting order. |

No Decision (ND) | The result when a starter is credited with neither a win nor a loss. |

OBP+SLUG (OPS) | On-base percentage plus slugging percentage. |

Offensive Winning Percentage (OWP) | The Winning Percentage a team of nine Fred McGriffs (or anybody) would compile against average pitching and defense. The formula: (Runs Created per 27 outs) divided by the League average of runs scored per game. Square the result and divide it by (1+itself). |

On Base Percentage | (Hits plus Walks plus Hit by Pitcher) divided by (At Bats plus Walks plus Hit by Pitcher plus Sacrifice Flies). |

Opponent Batting Average | Hits Allowed divided by (Batters Faced minus Walks minus Hit Batsmen minus Sacrifice Hits minus Sacrifice Flies minus Catcher’s Interference). |

Outfielder Hold Percentage | A statistic used to evaluate outfielders’ throwing arms. “Hold Percentage” is computed by dividing extra bases taken (by baserunners) by the number of opportunities. For example, if a single is lined to center field with men on first and second, and one man scores while the other stops at second, that is one extra base taken on two opportunities, a 50.0 hold percentage. |

PA* | The divisor for On Base Percentage: At Bats plus Walks plus Hit By Pitcher plus Sacrifice Flies; or Plate Appearances minus Sacrifice Hits and Times Reached Base on Defensive Interference. |

PCS (Pitchers’ Caught Stealing) | The number of runners officially counted as Caught Stealing where the initiator of the fielding play was the pitcher, not the catcher. Note: such plays are often referred to as pickoffs, but appear in official records as Caught Stealings. The most common pitcher caught stealing scenario is a 1-3-6 fielding play, where the runner is officially charged a Caught Stealing because he broke for second base. Pickoff (fielding play 1-3 being the most common) is not an official statistic. |

Percentage of Pitches Taken | This tells you how often a player lets a pitch go by without swinging. |

Percentage of Swings Put In Play | This tells you how often a player hits the ball into fair territory, or is retired on a foul-ball out, when he swings. |

Pickoffs (Pk) | The number of times a runner was picked off base by a pitcher. |

Pivot Percentage | The number of double plays turned by a second baseman as the pivot man, divided by the number of opportunities. |

PkOf Throw/Runner | The number of pickoff throws made by a pitcher divided by the number of runners on first base. |

Plate Appearances | At Bats plus Total Walks plus Hit By Pitcher plus Sacrifice Hits plus Sacrifice Flies plus Times Reached on Defensive Interference. |

Power/Speed Number | A way to look at power and speed in one number. A player must score high in both areas to earn a high Power/Speed Number.The formula: (HR x SB x 2) divided by (HR + SB). |

Quality Start | Any start in which a pitcher works six or more innings while allowing three or fewer earned runs. |

Quick Hooks and Slow Hooks | A Quick Hook is the removal of a pitcher who has pitched less than 6 innings and given up 3 runs or less. A Slow Hook occurs when a pitcher pitches more than 9 innings, or allows 7 or more runs, or whose combined innings pitched and runs allowed totals 13 or more. |

Range Factor | The number of Chances (Putouts plus Assists) times nine divided by the number of Defensive Innings Played. The average for a Regular Player at each position in 1997: |

- 5.00 points for second base, 2.67 points for third base, 4.56 points for shortstop, and 1.99 points for left field, 2.55 points for center field, and 2.06 points for right field.

Relief Points (Pts) | Wins plus saves minus losses |

Run Support Per 9 IP | The number of runs scored by a pitcher’s team while he was still in the game times nine divided by his Innings Pitched. |

Runs Created | A way to combine a batter’s total offensive contributions into one number. The formula:(H + BB + HBP – CS – GIDP) times (Total Bases +.26(TBB – IBB + HBP) +.52(SH + SF + SB)) divided by (AB + TBB + HBP + SH + SF). |

Runs/Times on Base | This is calculated by dividing Runs Scored by Times on Base |

Save Percentage | Saves (SV) divided by Save Opportunities (OP). |

Save Situation | A Relief Pitcher is in a Save Situation when upon entering the game with his club leading, he has the opportunity to be the finishing pitcher (and is not the winning pitcher of record at the time), and meets any one of the three following conditions: |

- He enters the game with a lead of no more than three runs and has the opportunity to pitch for at least one inning, or he enters the game with the potential tying run on base, at bat, or on deck, regardless of the count, or he pitches three or more innings regardless of the lead and the official scorer awards him a save
- Or he pitches three or more innings regardless of the lead and the official scorer awards him a save

SBA | Stolen-base attempts against a catcher |

SB Success% | Stolen Bases divided by (Stolen Bases plus Caught Stealing). |

Secondary Average | A way to look at a player’s extra bases gained, independent of Batting Average. The formula:(Total Bases – Hits + TBB + SB) divided by At Bats. |

Slow-A | Otherwise known as “Regular A,” these full-season minor leagues contain less-experienced professional players. The Slow-A leagues are the Midwest League and South Atlantic League (Sally). |

Slugging Percentage | Total Bases divided by At Bats. |

Stolen Base Percentage Allowed | This figure indicates how successful opposing baserunners are when attempting a stolen base. It’s stolen bases divided by stolen-base attempts. |

Times on Base | Hits plus walks plus hit by pitch |

Total Bases | Hits plus Doubles plus (2 times Triples) plus (3 times Home runs). |

Win-Loss Percentage or Winning Percentage | Wins divided by (Wins plus Losses). |

Zone Rating | Simply the percentage of balls fielded by a player in his typical defensive “zone,” as measured by STATS reporters. |

Formulas and Definitions | |

PA | AB + BB + HBP + SF + SH + defensive interference |

PA* | AB + BB + HBP + SF |

Total Bases | |

AVG | H/AB |

OBP | (H + BB = HBP)/(AB + BB + HBP + SF) |

SLG | TB/AB |

Breakdown Categories | |

Ahead/Behind in Count | For hitters, ahead in count includes 1-0, 2-0, 3-0, 2-1 and 3-1. Behind in count for hitters includes 0-1, 0-2, 1-2 and 2-2. The opposite is true for pitchers. |

Day/Night | Officially, night games in the National League are those that start after 5:00 pm, while night games in the AL begin after 6:00 pm. Therefore, a game at 5:30 in Yankee Stadium is a day game while one in Shea Stadium at the same time is a night game. We avoid this silliness by calling all games starting after 5:00pm night games. |

First Pitch | Refers to the first pitch of a given at bat, and any walks listed here are intentional walks. |

Grass/Turf | Grass is grass. Turf is artificial turf. |

Groundball/Flyball Ratio | A hitter’s stats against pitchers that induce mostly grounders or flies, respectively. If the ratio is less than 1.00, then he is a Flyball hitter. If it is greater than 1.50, he is a Groundball hitter. Anything else is classified as neutral. Same cutoffs apply for classifying pitchers. Anyone with less than 50 plate appearances is automatically neutral. |

First Inning Pitched | Describes the result of the pitcher’s work until he recorded three outs. |

Inning 1-6 and Inning 7+ | These refer to the actual innings in which a pitcher worked. |

None On/Out | Refers to situation when there are no outs and the bases are empty (generally leadoff situations). |

None On/Runners On | Describes the status of the baserunners |

Number of Pitches | This section shows the results of balls put into play while his pitch count was in that range. |

Pitcher/Batter Match-Ups | The following conditions must be met before a player is added to the list: |

- For a batter to be considered a “Hits Best Against” candidate, there must be at least 10 plate appearances between him and the pitcher
- And for a pitcher to be considered a “Pitches Best Against” candidate, the batter must have a.300 batting average against the pitcher, and the pitcher must limit the batting average of the batter to under.250.

Scoring Position | At least one runner must be at either second or third base. |

Vs. 1st Batr (Relief) | Describes what happened to the first batter a reliever faces. |

## What is the difference between DH and DP? – Greedhead.net

Pre-game, you must decide which defensive player you want the defensive player to bat for before the game can begin in earnest. This guy takes on the role of the FLEX and only plays DEFENSE, however he does have some offensive possibilities as well. In the past, the DP was referred to as a DH (Designated Hitter), and he was only allowed to bat. There are no defensive choices.

## What is DP in softball stats?

DP is an abbreviation that stands for Designated Player. Consider it comparable to a Designated Hitter in baseball, with the exception that a designated hitter in baseball can bat in the place of another player already in position, but a designated hitter in football cannot play defense. The similarities end there, though.

## What do the abbreviations in baseball mean?

BA – Batting average (also known as AVG) — the number of hits divided by the number of at bats. In baseball, the term “base on balls” (sometimes known as “walk”) refers to getting four balls and moving up to first base. Walking-to-strikeout ratio (BB/K) is defined as the number of base on balls divided by the number of strikeouts. Extra base hits (doubles, triples, and home runs) are referred to as XBH.

## How do you use DP Flex?

The DP and Flex positions are linked at the hip in terms of the batting order. During a game where both players are present, the Flex is designated as number 10 in the batting order (i.e. she does not bat). There is only one position in the batting order where either DP or the Flex can bat, and that is the position that the DP occupied at the start of the game.

## Can the DP play defense?

The STARTING DP is capable of playing defense for any of the other nine players on the field at the same time. 10. If the DP returns to the game, she must do so in her original batting order position, and the FLEX player has the option to: (A) go back to the No. 10 position; or (B) stay in the No. 10 position.

## What does R mean in softball?

Runs are permitted. IP stands for innings pitched. H: Hits are permitted. R: It is permissible to run. ER stands for earned runs allowed. BB stands for base on balls (walks)

## What does G mean in baseball?

Games That Have Been PlayedGames That Have Been Played (G) Grand Slam is a series of victories in a single sport (GSH) Toss The Ball Into Double Play (GIDP) The Groundout-to-Airout Ratio (GO/AO) is the ratio of groundout to airout. Pitch-for-pitch (HBP)

## What is a PO in baseball?

It is a putout when one of the fielders, such as a forceout, tagging a runner, fielding an infield fly, or fielding a third strike, is the one who physically records the act of making an out, whether it be by standing on the base or fielding a third strike.

## Can the Flex hit for the DP?

The FLEX is capable of both batting and running, but only for the original DP. As a result, the DP and the FLEX CANNOT both be on the offensive at the same time.

## How is the run differential of a baseball team determined?

Differential Definition for the Run The run differential of a team is calculated by subtracting the total number of runs (earned and unearned) that it has allowed from the total number of runs that it has scored throughout the season.

## What does LHP stand for in Major League Baseball?

K: The ball is out (A backwards K would mean struck out looking) LHP is an abbreviation for left-handed pitcher. LOB: Bases were left on the field. MLB is an abbreviation for Major League Baseball.

## What do the abbreviations stand for in baseball?

To be successful in handicap games, you must be familiar with the jargon and abbreviations used in the industry. You’ll find a collection of regularly used baseball acronyms listed here, which you’ll encounter on stats screens and in boxscores.

## How to calculate on base percentage in baseball?

Calculate the hitter’s on-base percentage by adding up the number of base hits, walks (Base on Balls/BB), and times the batter was hit by a pitch throughout the season. Using this statistic, divide it by the number of at bats, the number of walks, the number of hits, the number of times the batter walked, and the number of times the batter hit a sacrifice fly in order to move a runner forward.

## What is the difference between DH and DP? – idswater.com

Pre-game, you must decide which defensive player you want the defensive player to bat for before the game can begin in earnest. This guy takes on the role of the FLEX and only plays DEFENSE, however he does have some offensive possibilities as well. In the past, the DP was referred to as a DH (Designated Hitter), and he was only allowed to bat. There are no defensive choices.

## What is DP in softball stats?

DP is an abbreviation that stands for Designated Player. Consider it comparable to a Designated Hitter in baseball, with the exception that a designated hitter in baseball can bat in the place of another player already in position, but a designated hitter in football cannot play defense. The similarities end there, though.

## What is a DP?

A display image or avatar is a graphical depiction of a user or their character that appears in video games and on the internet.

## Can the DP run for the flex?

The FLEX player may bat and run, but only at the same position as the original DP. As a result, neither the FLEX player nor the DP can ever be on the offensive at the same time. When the FLEX player bats for the DP, the FLEX player takes the place of the original DP in the batting order. The DP is regarded to have left the game, but the FLEX player is not considered to have left the game.

## What does DP mean in text?

0. “Display Picture” is an abbreviation used in messaging that stands for “Display Picture.”

## What is DP Flex?

The DP and Flex positions are linked at the hip in terms of the batting order. During a game where both players are present, the Flex is designated as number 10 in the batting order (i.e. she does not bat). There is only one position in the batting order where either DP or the Flex can bat, and that is the position that the DP occupied at the start of the game.

## What is DP in FB?

DP is an abbreviation for Display Picture.

It depicts a photo that is often used to post to a social networking site such as Facebook, Twitter, Tumblr, or other similar sites like these.

## How do you use DP Flex?

The flex position is a position in a fantasy football lineup that can be filled by any position, such as quarterback, wide receiver, or any other combination of positions. In essence, the flex position is simply an additional spot in the roster that may be used for whatever you choose. Place the second quarterback in the flex position, and both quarterbacks will earn you points!

## What does double print mean on baseball cards?

Double Print (DP): A baseball card that has been printed twice as many times as the rest of the cards in the set is known as a double print. This is owing to the fact that, on sometimes, two identical cards will appear on a sheet (which has 132 cards per page), which is then sliced into individual cards after being sorted.

## What does it mean to be designated for assignment in baseball?

“Designated for assignment,” often known as “DFA,” is a practice in baseball in which a player is removed from a team’s 40-man roster after being designated for assignment. However, because of the seven-day constraint, it is not the same as a full-fledged release. A Major League Baseball team must complete one of the following tasks within the next seven days:

## What are the abbreviations for Major League Baseball?

Stats from the baseball field. Baseball Abbreviations 101: Offensive Abbreviations for Statistics. AB. BB. AVG. CS. 2B. GIDP. AB. BB. AVG. CS. 2B. GIDP. AB. BB. AVG. CS. 2B. GIDP.

## When do you play a double header in baseball?

As defined by baseball, a DoubleHeader is a situation in which two teams play two games in one day with the same crowd in attendance. The term “Aday Night” or “Twi-Night Double Header” refers to a game that is played in the afternoon and another in the evening, with different entry costs for each game.

## What does double play stand for in baseball?

Navigate to the next page Go directly to the search page. Performing two outs in the same continuous play in baseball is known as a double play (abbreviated as DP in baseball statistics).

## How many players can you start a game with as a DP?

The game may be played with a total of nine beginning players shown on the line-up card. Before the game begins, this must be indicated on the line-up card that is provided to the home plate official. Later in the game, you will not be able to swap and go to a DP. 2) A club that employs the DP begins the game with a lineup consisting of ten players.

## What’s the difference between a flexible player and a DP?

What is the difference between a Designated Player (DP) and a Flexible Player (Flex) in soccer? Essentially, a defensive player (DP) is a guy that is allocated to BAT ONLY for one of the nine starting defensive players, but who also has some defensive alternatives. Pre-game, you must decide which defensive player you want the defensive player to bat for before the game can begin in earnest.

## Who is the designated player in a baseball game?

Essentially, a defensive player (DP) is a guy that is allocated to BAT ONLY for one of the nine starting defensive players, but who also has some defensive alternatives. Pre-game, you must make a decision as to which defensive player you would want to bat for before the game begins.

## MLB Baseball Abbreviations Legend

MLB Abbreviations and Symbols

Heading | Explanation | Position | Explanation |

W / L | Wins / Losses | C | Catcher |

ATS | Record Against The Spread | 1B | First Base |

Slug | Slugging Percentage | 2B | Second Base |

Ho | Home record | 3B | Third Base |

Aw | Away Record | SS | Short Stop |

O/U | Over/Under Record | LF | Left Field |

AF | Average Runs For | CF | Center Field |

AA | Average Runs Against | RF | Right Field |

BA | Batting Average | DH | Designated Hitter |

SLG | Slugging Percentage | SP | Starting Pitcher |

HR | Home Runs For | RP | Relief Pitcher |

ERA | Earned Run Average | ||

OBP | On Base Percentage | ||

Home-Away | Home Score – Away Score | ||

H Starter | Home Starter in that particular game | ||

A Starter | Away Starter in that particular game | ||

LOB:R | Left On Base to Runs ratio | ||

OPS | Slugging Percentage + On Base Percentage | ||

AVG | Batting Average for that game | ||

Starter | Team’s Starter for that game | ||

IP | Innings the starter pitched | ||

Opp Starter | Innings the starter pitched | ||

H | Hits Allowed by the starter | ||

R | Runs Allowed by the starter | ||

ER | Earned Runs Allowed by the starter | ||

SO | Strikeouts by the starter | ||

BB | Base on Balls allowed by the starter | ||

PIT | Total Pitches by the starter | ||

P/IP | Pitches divided by the number of Innings Pitched | ||

G/F | Number of Ground Ball outs divided by the Fly Ball outs | ||

OBA | Opposition Batting Average | ||

WHIP | Walks and Hits per Inning Pitched | ||

GB:FB | Ground Ball to Fly Ball Ratio | ||

SB | Stolen Bases | ||

CS | Caught Stealing | ||

SB% | Stolen Base Percentage | ||

QS% | Quality Start Percentage | ||

TWL | Team Win – Team Loss | ||

W/L% | Winning Percentage | ||

vs. R | vs. Right-handed Pitchers | ||

vs. L | vs. Left-handed Pitchers | ||

Start | Starters | ||

Rel | Relievers | ||

R/9 | Runs per nine innings | ||

K | Strikeouts | ||

Doub | Doubles | ||

Trip | Triples | ||

$ | Units Won or Lost | ||

Line | Line for the game | ||

$ Won | Units Won | ||

$ Loss | Units Lost |

## Basic Baseball Stats Abbreviations

It is possible to make an already thrilling game even more interesting to watch by understanding the meanings of fundamental baseball statistics acronyms. If you know the W+S and BS percentages of a pitcher in the 7th inning, for example, a manager’s choice to replace him in the 7th inning signifies a lot more.

Continue reading to understand the definitions of significant baseball acronyms, as well as how they impact the effectiveness of a baseball team. A large group of people is watching a baseball game.

## Offensive Statistics Abbreviations

Batting practice is in session, so get ready to swing! The anticipation of seeing a hitter make his way from the strike zone to the infield is one of the most enjoyable aspects of the game. When a hitter or runner attempts to put points on the board, the following abbreviations are used to indicate their position.

### Batting Abbreviations

What is the difference between an AB and a BA for a batter? With the help of these abbreviations, you may become an expert in batting terminology and statistics.

- A total of 1BorS is a single
- A total of 2B is a double
- A total of 3B is a triple
- A total of AB is a total of at bats
- An AB/HR is a total of at bats per home run. AO- Airplane Takeoffs and Landings
- BAorAVG is the batting average
- BAorAVG is the batting average
- Bases on Balls (Walks)
- BB- Bases on Balls (Walks)
- In baseball, BABIP is for Batting Average on Balls in Play. In baseball, BB/K stands for Batting Average on Strikeouts. BRorBsR- Base Runs
- BRorBsR- Base Runs EQA is an abbreviation for Equivalent Average. Ground into Double Plays (GIDP) are a type of ground into double play. Ground Balls to Fly Balls
- GO/AO- Ground Balls to Fly Balls
- GSorGRSL- Grand Slams
- H- Hits
- HBP- Hit by Pitch
- GSorGRSL- Grand Slams
- HRR is an abbreviation for Home Run Ratio
- HR is an abbreviation for Home Runs
- HR/H is an abbreviation for Home Runs per Hit. Home Run within the park, abbreviated as ITPHR
- ISO is an abbreviation for Isolated Power
- KorSO is an abbreviation for Strikeouts
- And OBP is an abbreviation for On-Base Percentage. OPS stands for On-Base Plus Slugging
- PA stands for Plate Appearance
- PA/SO stands for Plate Appearances per Strikeout
- RBI stands for Runs Batted In
- RC stands for Runs Created. RISP stands for Runner in Scoring Position
- RP stands for Runs Produced
- SF stands for Sacrifice Flies
- SH stands for Sacrifice Hits (bunts)
- SLG stands for Slugging Average
- TA stands for Total Average
- TB stands for Total Bases
- TOB stands for Times on Base
- XBH stands for Extra Base Hits.

### Baserunning Abbreviations

What happens now when the hitter has reached second base? An individual’s SB percentage becomes extremely essential while examining his or her possibilities at second base, for example. Take a look at these acronyms that might help you forecast if a runner will remain put or try to take the ball from you.

- CS stands for Caught Stealing
- DI stands for Defensive Indifference
- LOB stands for Left on Base (Runners)
- R stands for Runs
- SB stands for Stolen Bases. SB percent stands for Stolen Base Percentage
- SBAorATT stands for Stolen Base Attempts
- SBR stands for Stolen Base Runs
- And UBR stands for Ultimate Base Running.

## Defense Statistics Abbreviations

A high-quality pitcher has the ability to influence the flow and outcome of a baseball game. An inexpensive pitcher, on the other hand, can accomplish the same result. See how the statistics of fielders and pitchers may have an impact on a baseball team’s infield and outfield defense.

### Fielding Abbreviations

What distinguishes a first baseman as one worth keeping an eye on? What about a left fielder or right fielder? With the help of these acronyms, you may get more familiar with fielding statistics.

- A stands for assists
- CI stands for Catcher’s Interference
- DP stands for double plays
- E stands for errors
- FP stands for Fielding Percentage
- GP stands for games played. The following terms are used in baseball: INN-innings (in a certain position)
- OFA-outfield assists
- PB-passed balls
- PK-pickoffs
- PO-putouts
- TC-total chances (assists plus putouts + errors)
- TP-triple plays
- UZR-ultimate zone rating.

### Pitching Abbreviations

Pitching statistics have the ability to make or break a team’s defensive performance. Examine the following baseball acronyms to determine what is desirable – and what is unsafe – in a pitching bullpen.

- BB- Bases on Balls
- BB/9- Bases on Balls per nine innings
- BF- Batters Faced
- BB/9- Bases on Balls per nine innings BFP stands for Batters Facing the Pitcher. Balks (illegal pitching actions)
- BK- Balks (Balks (Illegal Pitching Actions)
- BS stands for Blown Save. CERA is for Component ERA
- CBO stands for Combined Shutout
- CG stands for Complete Games
- CGL stands for Complete Game Losses
- DICE stands for Defense-Independent Component ERA. ER is for Earned Runs
- ERA stands for Earned Run Average. GorGP- Games have been pitched
- GF- Games have been completed. Double Plays or Double Play Groundouts Induced
- GIDPO- Double Play Opportunities
- GIDP- Double Plays or Double Play Groundouts Induced GIR stands for Games in Relief. GO- Ground Outs
- GO/AO- Ground Outs to Fly Outs
- GO/AO- Ground Outs to Fly Outs GS stands for Games Started
- FIP stands for Fielding Independent Pitching. HorHA stands for Hits Allowed
- H/9orHA/9 stands for Hits Allowed over 9 Innings
- HBorHBP stands for Hit Batters
- HLDorH stands for Hold
- HRorHRA stands for Home Runs Allowed. IR- Inherited Runners
- IRA- Inherited Runs Allowed
- K- Strikeouts
- K/9orSO/9- Strikeouts per nine innings
- L- Losses (while pitching)
- BB- Balls on Bases
- IPS- Innings Per Start
- IBBorIW- Intentional Walks
- IP/GS- Innings Pitched Per Games Started
- IP/GS- Innings Pitched per Games Started LOB is an abbreviation for Left on Base
- LOB percent is an abbreviation for Left on Base Percentage
- OBA is an abbreviation for Opponents’ Batting Average. The pitch count and strike count inside those pitches are denoted by the letters PC-ST. PIT or NP-Pitch Count
- MB9-Baserunners Per 9 Innings
- PIT or NP-Pitch Count
- PFR is the Power Finesse Ratio (the sum of strikeouts and walks divided by the number of innings pitched). QOP is for Quality of Pitch
- QS stands for Quality Start. RA is for Run Average (number of runs allowed over nine innings)
- RPF stands for Relief Failures
- RW stands for Relief Wins. Shutouts
- S/SHO- Shutouts SIERA (Skill-Interactive Earned Run Average) is an acronym that stands for Skill-Interactive Earned Run Average. A combination of K/SO and strikeouts. SV- Saves
- SVO- Save Opportunities
- W- Wins
- W+S- Relief Wins and Saves
- SV- Saves
- SVO- Save Opportunities WHIP is the number of walks and hits allowed per inning pitched. WP stands for Wild Pitches.

## NERD Statistics

When it comes to baseball acronyms, the acronym NERD may come up in conversation. NERD is an abbreviation for Narration, Exposition, Reflection, and Description, which is a word used in abermetrics. In its simplest form, it is a mathematical formula that evaluates the aesthetic worth of seeing a pitcher (pNERD) or a team (tNERD) play baseball based on a variety of performance measures.

- Grades 8 through 12 are divided into four categories: middle school, high school, and college.

### Related Articles

- Baseball Position Abbreviations and Numbers (Baseball Positions) A baseball position list may be quite useful while studying the game of baseball or when attempting to solve a baseball crossword puzzle puzzle hint. In baseball, the different player positions are sometimes reduced and replaced with standardized numbers in order to make calling and scoring a game more efficient
- For example, Baseball Abbreviations for the Scoreboard and Scorecard Baseball scorecards are used by everyone from Little League umpires to Major League umpires to baseball spectators to keep track of all the activity during a game of baseball. If you want to be able to write or read a baseball scorecard, you’ll need to start by being familiar with all of the standard baseball scorecard acronyms and symbols.

## The 6-4-3 DP Athletics Story

Danny Pralgo, one of the most highly sought after teachers in the Atlanta region, founded 6-4-3 DP Baseball Academy in 2007, which became the forerunner of 6-4-3 DP Athletics in 2008. Pralgo has been a student of the game throughout his life, beginning with his days as a youth, high school, and college athlete, and continuing through his many years as a great basketball coach. The game of baseball has evolved over the years into a business that is more concerned with making a profit than with educating, developing, and aiding our young to fulfill their potential in the game and in life.

It was his “old school” ideals and viewpoint on the game that paved the way for the establishment of the 6-4-3 DP Baseball Academy in 2010.

Since 2007, Pralgo has recruited a group of outstanding baseball and business brains to begin the process of turning his vision into a reality.

6-4-3 DP Athletics, in conjunction with its new home at the Aviation Sports Complex in Marietta, Georgia, will be able to better fulfill the development requirements of youngsters in the region who are interested in learning the sports of baseball and softball.

6-4-3 DP is the mission statement.

Our organization is committed to providing a unique and safe environment for young athletes of all ages in which they can learn the fundamentals of the game, improve their baseball and softball skills, and develop life skills that will prepare them for success on and off the baseball and softball fields.